Mariner

2012-11-11

: Pdf Mariner mariner spec products industrial

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadMariner
Open PDF In BrowserView PDF
MARINER™
FLOODLIGHT

Cat. #

Approvals

Job

Type

Industrial Lighting

STAINLESS STEEL FLOOD

APPLICATIONS
• For use in corrosive, hosedown, marine, shipboard and hazardous environments. Integrally ballasted luminaire. SFMM Series is for marine applications.
SFM2 Series is for hazardous and marine applications.
SPECIFICATIONS
• Restricted Breathing “RB” option for lower T-Ratings.
• Elevated ambient “EA” options capability up to 65°C.
• “Quick release” lens latches for ease of entry, no screws.
• Luminaire, lens frame, lens latches – 16 gauge 316SS.
• Mounting yoke, safety lens door chains, cord grips (SFMM), conduit hubs
(SFM2) – SS316.
• Mounting accessories are hot dipped galvanized steel.
LISTINGS
• SFMM and SFM2 Listings: UL1598 and 1598A Marine Outdoor.
NEMA 4X; IP66/67
• SFM2 Listings: UL844 Standard: Class I, Division 2 Groups A, B, C, D; Class I,
Zone 2 Groups IIC, IIB, IIA.
ExnR, AxnR Restricted Breathing.
• Type approval American Bureau of Shipping (ABS)

G

A

F
B

H

L
10.16"(258.06mm)
Center Hole
0.88" (22.2mm)

D

K

I

2 Holes
0 56"
(14.3mm)

E

J

C

A

B

C

D

E

F

185/16"
465 mm

257/32"
640 mm

207/32"
513 mm

11/2"
39.7 mm

33/32"
79.5 mm

1923/32"
500 mm

G

H

I

J

K

L

819/32"
11"
2"
220 mm 279.4 mm 50.8 mm

2"
1013/16"
4 7/32"
50.8 mm 274.3 mm 106.3 mm

ORDERING INFORMATION
ORDERING EXAMPLE: SFM2-40-P-8-EA

Series

Wattage

SERIES
SFMM Stainless Flood Marine
SFM2
Stainless Flood Marine
Class I, Division 2

Source

Voltage

Options

SOURCE
S
High Pressure Sodium
P
Pulse Start (PS) Metal Halide
(lamp included)

WATTAGE
15
150W HPS, PS
17
175W PS
25
250W HPS, PS5
40
400W HPS, PS
1
2
3
4
5

To denote voltage, replace X with 1=120V; 2=208V; 3=240V; 4=277V; 5=480V; 6=347V.
Not UL 1598A Marine Listed or CSA listed for hazardous location.
CSA certification applicable to Tri-Tap® ballast only.
Available in SFMM only. Not suitable for hazardous location.
250W Pulse Start not available in 480V or Tri-Tap®.

HUBBELL INDUSTRIAL LIGHTING

VOLTAGE
5
480V5
6
Tri-Tap® (120/277/347V)
8
Quad-Tap®
(120/208/240/277V)
E
220/240V, 50 Hz
P
220V, 60 Hz
(250, 400W MH only)

OPTIONS
F(X)
RS
QS
PCR(X)
EA

RB

Fusing (specify voltage)1,2,3
Hot Re-Strike (150W HPS)
Quartz Standby4
Photo Control1,2,3,4
Elevated Ambient (40°C,
55°C, 65°C) capabilities,
see chart for applicable
wattages
Restricted Breathing Housing
allowing lower T-Ratings for
SFM2 & SFMH2 Series only.
Fixture provided with test
port entry on side.

SHEET # SFM-SPEC7/10

SFMM/SFM2*
INTEGRAL BALLAST AMBIENT SUITABILITIES & T-RATINGS*
(SUFFIX “EA”)
WATTAGE &
LAMP TYPE

150W PS
175W MH
250W MH, PS
400W MH, PS
150W HPS
250W HPS
400W HPS
175W MV
250W MV
400W MV

T-RATINGS & AMBIENT TEMPERATURE
40°C
55°C
65°C
CLASS I CLASS I CLASS I CLASS I CLASS1 CLASS I
DIV 2/
ZONE 2
DIV 2/
ZONE 2
DIV 2/
ZONE 2
ZONE 2
ExnR
ZONE 2
ExnR
ZONE 2
ExnR
AExnR
AExnR
AExnR
T1
T4
T1
T3
T1
T3
T1
T4
T1
T3
T1
T3
T1
T3
T1
T1
—
—
T1
T3
—
—
—
—
T2A/T2
T4
T2
T4
T2
T3
T1
T3
T1
T3
—
—
T1
T3
—
—
—
—
T1
T4
T1
T4
T1
T3
T1
T3
T1
T3
—
—
T1
T3
—
—
—
—

SFMM/SFM2
INTEGRAL BALLAST SUPPLY WIRE RATINGS
(SUFFIX “EA”)
WATTAGE/LAMP TYPE
175W MH
250W MH, PS
400W MH, PS
150W HPS
250W HPS
400W HPS
175W MV
250W MV
400W MV

AMBIENT TEMPERATURE
40°C
55°C
65°C
90°C
90°C
110°C
110°C
110°C
—
110°C
—
—
90°C
90°C
110°C
90°C
110°C
—
110°C
—
—
90°C
110°C
110°C
90°C
110°C
—
110°C
—
—

* For standard SFM2 (less suffix EA), apply T-Ratings from 40°C column above.

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

Hubbell Industrial Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • PHONE: 864-678-1000
For more information visit our web site: www.hubbell-ltg.com
Industrial Lighting
Copyright © 2010 HUBBELL LIGHTING All Rights Reserved SFM-SPEC7/10 Printed in USA
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2010:08:23 14:53:50-04:00
Modify Date                     : 2010:08:23 14:53:50-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2010:08:23 14:53:50-04:00
Document ID                     : uuid:6b22c508-5a6a-4bf3-9746-d0fbc32de9ae
Instance ID                     : uuid:5287f6bd-49a2-4973-a3e1-ef2eb2e71ae1
Format                          : application/pdf
Page Count                      : 2
Signing Date                    : 2010:08:23 14:53:50-04:00
Signing Authority               : ARE Acrobat Product v8.0 P23 0002337
Annotation Usage Rights         : Create, Delete, Modify, Copy, Import, Export
Document Usage Rights           : FullSave
Form Usage Rights               : Add, FillIn, Delete, SubmitStandalone
Signature Usage Rights          : Modify
EXIF Metadata provided by EXIF.tools

Navigation menu