Matrix Area Spec Sheet
2017-11-10
: Pdf Matrix Area Spec Sheet Matrix_area_spec_sheet spec products beacon
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
MATRIX Cat.# Job Type design . per formance . technology Approvals AREA/POST TOP SPECIFICATIONS PRODUCT IMAGE(S) Intended Use: The Beacon Matrix luminaire is available in three configurations with a wide choice of different LED wattage configurations and optical distributions designed to replace HID lighting up to 1000W MH or HPS. Luminaires are suitable for wet locations. Construction: • Manufactured with die cast aluminum. • Coated with a polyester finish that meets ASTM B117 corrosion test requirements and ASTM D522 cracking and loss of adhesion test requirements. • External hardware is corrosion resistant. • One piece optical cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel. • Cartridge can be field replaced as a one piece optical system. • Silicone gasket ensures a weather-proof seal around each individual optic. Electrical: • Luminaire accepts 100V through 277V, 50 Hz to 60 Hz (UNV), 347V, or 480V input. • Power factor is ≥ .90 at full load. • Dimming drivers are standard, but must contact factory to request wiring leads for purpose of external dimming controls. • Component-to-component wiring within the luminaire may carry no more than 80% of rated load and is certified by UL for use at 600VAC at 90°C or higher. • Fixture electrical compartment shall contain all LED driver components and optional push-button terminal block for AC power connections. • Optional 7-pin ANSI C136.41-2013 twist-lock photo control receptacle available. Compatible with ANSI C136.41 external wireless control devices. • Ambient operating temperature -40°C to 40°C • Surge protection - 20kA. ANSI/IEEE category C high Installation: • Mounting options for horizontal arm, vertical tenon or traditional arm mounting available. Mounting hardware included. Finish: • IFS polyester powder-coat electrostatically applied and thermocured. IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish. • The finish meets the AAMA 2604 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds. Certifications/Ratings: • DesignLights Consortium (DLC) qualified, consult DLC website for more details: http://www.designlights.org/QPL • Certified to UL 1598, UL 8750, and CSA C22.2 No. 250.0 • 3G rated for ANSI C136.31 high vibration applications with MAF mounting • IP65 optical assembly • IDA approved Upswept Arm Post Top Knuckle Mast Arm DIMENSIONS 29.7 Warranty: Five year limited warranty for more information visit: www.hubbelllighting.com/resources/warranty 25.0 4.9 Controls/Options: 29.7 • Available with an optional passive infrared (PIR) motion sensor capable of detecting motion 360° around the luminaire. When no motion is detected for the specified time, the motion response system reduces the wattage to factory preset level, reducing the light level accordingly. When motion is detected by the PIR sensor, the luminaire returns to full wattage and full light output. Please contact Beacon Products if project requirements vary from standard configuration. • Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night (see www.beaconproducts.com/products/energeni). 25.0 36.2 • In addition, Matrix can be specified with SiteSync™ wireless control system for reduction in energy and maintenance costs while optimizing light quality 24/7. For more details, see ordering information or visit: www.hubbelllighting.com/sitesync CERTIFICATIONS/LISTINGS IP65 41.9 11.7 Model Mount Weight lbs. Weight kgs. EPA, Sq. ft. Area MAF ARM Post-Top Knuckle, 0˚ Knuckle, 30˚ 73.5 80.0 89.5 86.0 33.4 36.4 40.7 39.1 1.7 1.7 2.5 1.7 3.8 Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA November 9, 2017 2:58 PM ORDERING EXAMPLE: MAA/96L-555/5K7/2/UNV/ASQ/DBT/7PR-TL/BC MA/A SERIES ROTATION CCT/CRI7 ENGINE MA/A Matrix 80L-260 260W, 33,000 lm 5K7 5000K, 70 CRI 96L-315 315W, 40,000 lm 4K7 4000K, 325W, 37,000 lm 64L-325 70 CRI 64L-370 370W, 40,000 lm 3K7 3000K, 70 CRI 80L-405 405W, 45,000 lm 80L-465 465W, 50,000 lm 96L-490 490W, 55,000 lm 96L-555 555W 60,000 lm COLOR Leave blank for no rotation BL Black Textured L Optic rotation left 1 WH PS GYS GT TT CC R1 Optic rotation right DISTRIBUTION FR 2 3 4 5R 5QM 5QW Type 1/Front Row Type 2 Type 3 Type 4 Type 5 Rectangular Type 5 Square Med Type 5R Square Wide CONTROL OPTIONS DB Dark Bronze Textured White Textured Plat. Silver Smooth Light Gray Smooth Graphite Textured Titanium Textured 7PR-TL 7 pin PCR with photo control 7PR-SC 7 pin PCR with shorting cap 2PF 2 power feed with 2 drivers GENI2,3 Energeni 7 SCL/40F Low voltage sensor Custom Color MOUNTING ASQ Arm Square A2 Arm mount for 2.4”3.0” OD round pole 2,4,5 SCP/40F 2,6 SWP 2,6 SWPM/40F A3 Arm mount for 3.1”4.0” OD round pole VOLTAGE UNV 120-277V 347 347V 480 480V for 7PR-SC and wiSCAPE external control accessory Programmable Line Voltage sensor SiteSync Pre-Commission SiteSync Pre-Commission w/Sensor OPTIONS BC Backlight SF120 SF277 SF347 DF208 DF240 DF480 TB9 Control 120V Fuse 277V Fuse 347V Fuse 208V Fuse 240V Fuse 480V Fuse Terminal Block BS Bird Spikes A4 Arm mount for 4.1”5.0” OD round pole A5 Arm mount for 5.1”6.0” OD round pole MAF Mast Arm Fitter (same as slip fitter) o K8 Knuckle (5 adjustable fitter) PT2 Post top of 2 3/8” tenon (3.5 bottom OD) Accessories and Services (Ordered Separately) Not available with 5QM or 5QW distribution. Not available with other sensor or wireless control options. 3 Specify routine setting code (example GENI-04). See ENERGENI brochure and instructions for setting table options. 4 Photocell included with sensor, additional photocontrol not recommended. 5 Order at least one SCPREMOTE per project location to program and control 6 Specify group and zone at time of order. See www.hubbell-automation.com/products/sitesync/ for more details. Order at leaset one SiteSync interface Accessory SWUSB or SWTAB. Each option contains SiteSync License, GUI, and Bridge Node 7 7PR-TL shipped with shorting cap installed. Twist-lock photocell shipped with fixture. Installer must remove shorting cap and install photocell at time of installation. 8 Limited to applications requiring 30˚ tilt or less. If higher angle tilt is required use flood version with glass cover 9 Not available on K or PT2 mountings 10 Requires 7PR-SC photocell receptacle. Include SCL/40F if occupancy sensing is required 1 2 Control Accessories SWUSB SiteSync Software on USB SWTAB SiteSync Windows Tablet SWBRG SiteSync Wireless Bridge Node SCPREMOTE Order at least one per project location to program and control WIR-RME-L10 wiSCAPE external control node Accessories MAA-BC Backlight Control accessory kit PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.hubbell-automation.com/products/sitesync/ or contact Hubbell Lighting tech support at (800) 345-4928. SiteSync fixtures with Motion control (SWPM) require the mounting height of the fixture for selection of the lens. Examples: MAA/96L-555/4K7/3/UNV/K/GT/SWP MAA/96L-555/4K7/3/UNV/K/GT/SWPM/40F SiteSync only SiteSync with Motion Control SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. design . per formance . technology © 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA November 9, 2017 2:58 PM