5V1.25A ERP UL REV1.1 US Power Adapter
2016-04-11
: Pdf Us Power Adapter 5V1.25A Erp Ul Rev1.1 US_power_adapter_5V1.25A_ERP_UL_REV1.1 CertsReports 506526 ProductFiles
Open the PDF directly: View PDF .
Page Count: 12
Download | |
Open PDF In Browser | View PDF |
APPROVAL SHEET RoHS compliant APPROVAL SIGNATURES: CUSTOMER : 源拓光电 PART NAME : 5V 1.25A ADAPTER MODEL NO. : BSW0127-5012502W ISSUE DATE : 2010-8-3 VERSION NO. : UL REV1.1 EFFICIENCY STANDARDS: ERP ⅴ ACEPOWER ELECTRONICS CO.,LTD. Add.:No.312 Hongfa Road,South Bridge Area,Xiaoshan, Hangzhou,P.R.China P.C.:311231 Tel: +86-571-22868352 Fax: +86-571-22868512 E-mail: jennyking@acepower.com.cn http://www.acepower.com.cn Please fax back after your confirming. ACEPOWER Approved Checked Designed Prepared by by by by ELECTRONICS CO., LTD. Specification Type Department R&D Page 1 Date 2010-8-3 BSW0127-5012502W ADAPTER Document History Change Information Date Revision No. Previous version 2010-8-3 REV1.1 / Current version DC cord is changed. ACEPOWER ELECTRONICS CO., LTD. Approved by Specification Type BSW0127-5012502W ADAPTER LIST 1. Scope 2. Model No. 3. Referenced standard 4. Electrical characteristics 5. Circuit diagram 6. Use guide 7. Caution 8. Attachments 8.1 Label 8.2 DC cord drawing 8.3 Appearance drawing 8.4 Assembly drawing 8.5 Pack drawing 8.6 Test report Checked by Designed by Prepared by Department R&D Page 2 Date 2010-8-3 Approved by ACEPOWER ELECTRONICS CO., LTD. Specification Type Checked by Designed by Prepared by Department R&D Page 3 Date 2010-8-3 BSW0127-5012502W ADAPTER 1.Scope:This specification is applied to 5V 1.25A ADAPTER 2.Model No.: BSW0127-5012502W ADAPTER 3.Referenced standard:UL60950-1. 4.Electrical characteristics 4.1 Operating conditions: Operating temperature:0℃~40℃ Storage temperature:-20℃~70℃ Relative humidity:≤95% Air pressure:70~106KPa 4.2 Performance and measurement conditions: No Item Specifications Test Conditions 1 Appearance The color of the case is accordant. Pour is not distinctly deficient, no markedly air bubbles, sinking, and so on. The top and bottom case is tie in, no clearance, displacement≤1mm, lax≤1mm and so on. After free drop, the case is close. Visual Inspection 2 Size See Appearance drawing Vernier caliper 3 Power supply voltage 100-240VAC 50/60Hz 4 Input current 500mA 5 Output voltage Vout=5±5%VDC 0A≤IO≤1.25A ≤100mVp-p Measurement is done by 20MHz bandwidth oscilloscope and terminated each output with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor. (Vin=220VAC) Measurement is done by 25%load, 50%load, 75%load , 100%load , at 115VAC and 230VAC. 6 Ripple&Noise 7 Average efficiency ≥69.8% 8 Input power consumption ≤0.3W No load ACEPOWER ELECTRONICS CO., LTD. Specification Type Item 9 Over voltage protection 10 Short circuit protection 11 Dielectric Strength Insulation resistance Without damage such as insulation break down. ≥20MΩ Designed by Prepared by R&D Page 4 Date 2010-8-3 Specifications The adapter will shut down and will not been damaged. Checked by Department BSW0127-5012502W ADAPTER No. 12 Approved by Test conditions Use the Zener diode to protect the output. If short circuit occurs, all the output should be protected. After the fault, the adapter automatically recovers. Primary and secondary: AC3000(50Hz) Vrms,5mA, 1 minute for type test,1 second for production test. DC500V shall be applied for 1min. between Primary and Secondary, Primary and case DC500V shall be applied for 1min. between Secondary and case. Cord bending test ≥1000 times The DC cord shall withstand weight of 500g,it swing from left to right at angle of 120 degree, 40 times per min. 14 Strain relief test No damaged after the test Fix the main part of the adapter, Plug and cord at their normal position applied a weight of 5 Kg to output for 15 seconds. 15 High temperature storage test 16 Low temperature storage test 17 High temperature and high humidity operation test 18 M.T.B.F 19 Vibration test 13 20 Free drop test The adapter shall be storaged at temperature of 40±2℃,for 24hours. Clause 4.2.1, 4.2.5, 4.2.6, 4.2.11, 4.2.12 shall be satisfied. ≥50,000 hours No breakage should be observed; Mechanical and electronic characteristic meet design request The adapter shall be storaged at temperature of 0±2℃ for 24hours. The adapter shall be storaged at temperature of 40±2℃ with relative of 90%-95% for 48hours. At 25℃ Frequency:10-55Hz Amplitude:0.15mm, Time: 10times per directions (X,Y,and Z) Dropping from a height of 60cm to a wood plate of 20mm thickness. And 1 time each side total 6 times. ACEPOWER ELECTRONICS CO., LTD. Specification Type BSW0127-5012502W ADAPTER Approved by Checked by Designed by Prepared by Department R&D Page 5 Date 2010-8-3 5.Circuit diagram 100-240VAC Transformer Stabilize Voltage 6.Use guide Input:100-240VAC 50/60Hz (500mA) Output:5VDC 1.25A I/O connector Pin description:in(+),out(-) 7.Caution 7.1 Risk of electric shock 7.2 For indoor use only 7.3 Do not open the unit 7.4 Dry location use only 8. Attachments 8.1 Label 8.1.1 Material:PC (granulation); 8.1.2 Thickness:< 0.3mm; 8.1.3 Color:Black grounding, argent font; 8.1.4 L/No.:CY1028 is the track date, “10”means year, “28” means week; 8.1.5 Size & Content: Control Voltage Voltage Output 8.2 DC cord drawing 8.3 Appearance drawing 8.4 Assembly drawing 8.5 Pack drawing 8.6 Test report Efficiency of EUT 100.00% Efficiency 80.00% 60.00% 40.00% 20.00% 0.00% 0% 25% 50% 75% 100% Actual Fraction of Output Current Input and Output Power vs Output Current 10 Power(W) 8 6 Output Input 4 2 0 0% 25% 50% 75% 100% Actual Fraction of Output Current Input Power(W) Input vs Output Power 10 8 6 4 2 0 0 1.58 3.12 4.63 6.09 Output Power(W) No load Percent of nameplate current d.c. output current (A) d.c. output voltage (V) d.c. output power (W) a.c. input current (A) a.c. input voltage (V) a.c. input power (W) Total harmonic distortion (THD) of input current True power fact (W/VA) Power consumed by EUT 0% 25% 50% 75% 100% 0 5.111 0 0.0031 115.7 0.1 0.3136 5.051 1.58 0.0361 115.9 2.2 0.6265 4.991 3.12 0.0578 115.8 4.18 0.9376 4.937 4.63 0.0808 115.9 6.16 1.2512 4.879 6.09 0.115 115.12 8.22 324.59% 456.25% 445.14% 429.47% 0.53 0.62 0.626 1.06 0.627 1.53 0.63 2.13 0.5492 71.82% 74.64% 75.16% 74.09% 73.93% 22.45% 0.333 0.1 Efficiency Compulsory value Active power values ≤0.3W ≥0.075 x Ln (Pno) + 0.561=69.8% Measured and calculated data of BSW0127-5012502W at 115V 50Hz Average Efficiency of EUT Efficiency 100.00% 80.00% 60.00% 40.00% 20.00% 0.00% 0% 25% 50% 75% 100% Actual Fraction of Output Current Input and Output Power vs Output Current 10 Power(W) 8 6 Output Input 4 2 0 0% 25% 50% 75% 100% Actual Fraction of Output Current Input vs Output Power Input Power(W) 10 8 6 4 2 0 0 1.58 3.12 4.62 6.09 Output Power(W) No load Percent of nameplate current d.c. output current (A) d.c. output voltage (V) d.c. output power (W) a.c. input current (A) a.c. input voltage (V) a.c. input power (W) Total harmonic distortion (THD) of input current True power fact (W/VA) Power consumed by EUT 0% 25% 50% 75% 100% 0 5.111 0 0.0019 230.8 0.12 0.3136 5.05 1.58 0.0256 230.5 2.3 0.06256 4.911 3.12 0.042 230.8 4.31 0.9376 4.931 4.62 0.0566 230.5 6.32 1.2512 4.871 6.09 0.0678 230.1 8.32 368.73% 472.13% 453.19% 433.29% 0.381 0.72 0.446 1.19 0.499 1.7 0.543 2.23 0.442 68.70% 72.39% 73.10% 73.20% 71.80% 25.36% 0.341 0.12 Efficiency Compulsory value Active power values ≤0.3W ≥0.075 x Ln (Pno) + 0.561=69.8% Measured and calculated data of BSW0127-5012502W at 230V 50Hz Average
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:08:03 15:07:24+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2010:08:03 15:07:24+08:00 Format : application/pdf Title : Microsoft Word - 5V1.25A ERP UL REV1.1.doc Creator : Administrator Document ID : uuid:76026405-2d09-46c6-9869-1d86f6d58545 Instance ID : uuid:23c9c685-9409-44eb-be71-2b11385adca9 Page Count : 12 Author : AdministratorEXIF Metadata provided by EXIF.tools