Pepperl Fuchs IQH1-18GM-V1 RFID reader User Manual Data Sheet

Download:
Mirror Download [FCC.gov]
Document ID	2198757
Application ID	cZ5QArqFIh3KRDfOKg3VWg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.62kB (170283 bits)
Date Submitted	2014-02-24 00:00:00
Date Available	2014-02-24 00:00:00
Creation Date	2001-07-26 09:05:51
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2014-02-21 12:23:23
Document Title	Data Sheet
Document Creator	FrameMaker 7.0
Document Author:	MB, Pepperl+Fuchs GmbH

Read/write head
IQH1-18GM-V1
Dimensions
M18 x 1
16.4
55
66
50
16
Metal-free zone
24
LED
M12 x 1
Electrical connection
Model Number
IQH1-18GM-V1
Read/write head
for IDENTControl
Shield
Features
• Operating frequency 13.56 MHz
• Conforms to ISO 15693
• Suitable for FRAM transponder
• Read/write head with thread M18 x 1
• Connection via V1 (M12 x 1) plug
connection
• Multihole-LED for function display
• Degree of protection IP67
Technical data
General specifications
Operating frequency
Transfer rate
Sensing range
Read distance
Write distance
Width
UL File Number
13.56 MHz
26 kBit/s
0 ... 55 mm
0 ... 55 mm
max. 45 mm
E87056 only from low voltage, limited energy source (SELV or
PELV) or listed Class 2 source
Indicators/operating means
LED green/yellow
Multihole-LED:
green: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Release date: 2014-02-21 09:23 Date of issue: 2014-02-21 204622_eng.xml
Electrical specifications
Power consumption
Supply
P0
Ambient conditions
Ambient temperature
Storage temperature
-25 ... 70 °C (-13 ... 158 °F)
-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection
Connection
Material
Housing
Encapsulation compound
Installation
Distance between two heads
IP67
M12 x 1 connector
PBT/stainless steel
CY 221/HY 2966
non-flush
Multiplex on: ≥ 30 mm
Multiplex off: ≥ 80 mm
approx. 40 g
Mass
Compliance with standards and directives
Directive conformity
R&TTE Directive 1995/5/EC
Standard conformity
Electromagnetic compatibility
Degree of protection
RFID
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group
USA: +1 330 486 0001
Germany: +49 621 776 4411
fa-info@de.pepperl-fuchs.com
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
≤ 1.2 W
from the IDENTControl
EN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08),
EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006
EN 61000-6-2:2006 , EN 61000-6-4:2007
EN 60529:2000
ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC
18000-3:2008
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
Read/write head
Approvals and certificates
FCC approval
IQH1-18GM-V1
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Notes
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Accessories
IQC21-50P
Data carrier
IQC21-58
Data carrier
IQC22-C5
Data carrier
IQC33-20
Data carrier
IQC33-30
Data carrier
IQC33-50
Data carrier
V1-G-5M-PUR-ABG-V1-W
Connecting cable, M12 to M12, PUR cable 4-pin, shielded
V1-G-10M-PUR-ABG-V1-W
Connecting cable, M12 to M12, PUR cable 4-pin, shielded
IQC24-27-T12
Data carrier
IQC31-22-T9
Data carrier
IQC22-22CT-T9
Data carrier
Release date: 2014-02-21 09:23
Date of issue: 2014-02-21
204622_eng.xml
IQC22-C1 UNPRINTED
Data carrier
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group
USA: +1 330 486 0001
Germany: +49 621 776 4411
fa-info@de.pepperl-fuchs.com
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 2
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:b3e7e982-ab06-4688-99a3-a2d40d72fa87
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2001:07:26 09:05:51Z
Creator Tool                    : FrameMaker 7.0
Modify Date                     : 2014:02:21 12:23:23Z
Document ID                     : uuid:d55dad12-d5f2-4016-be48-9f7257c2918f
Format                          : application/pdf
Creator                         : MB, Pepperl+Fuchs GmbH
Description                     : Identification Systems
Title                           : Data Sheet
Author                          : MB, Pepperl+Fuchs GmbH
Subject                         : Identification Systems

EXIF Metadata provided by EXIF.tools