Pepperl Fuchs IQH1-FP-V1 RFID reader User Manual Data Sheet

Pepperl + Fuchs Inc RFID reader Data Sheet

user manual

Read/write head IQH1-FP-V11Release date: 2014-02-21 09:23 Date of issue: 2014-02-21 204623_eng.xmlGermany: +49 621 776 4411Pepperl+Fuchs GroupRefer to “General Notes Relating to Pepperl+Fuchs Product Information”.USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.comfa-info@de.pepperl-fuchs.comModel NumberIQH1-FP-V1Read/write headfor IDENTControlFeatures• Operating frequency 13.56 MHz• Conforms to ISO 15693• Suitable for FRAM transponder• Dual-LED for function display• Connection via V1 (M12 x 1) plug connection• Degree of protection IP67DimensionsElectrical connectionTechnical dataGeneral specificationsOperating frequency 13.56 MHzTra n s f e r r ate 2 6 k B i t / sSensing range Read distance 0 ... 130 mmWrite distance 0 ... 130 mmWidth max. 100 mmUL File Number E87056Functional safety related parametersMTTFd 680 aMission Time (TM) 10 aDiagnostic Coverage (DC) 0 %Indicators/operating meansLED green/yellow green: power ongreen flashing: read/write attempt performedyellow: data carrier detectedElectrical specificationsPower consumption P0≤ 1.3 WSupply from the IDENTControlAmbient conditionsAmbient temperature -25 ... 70 °C (-13 ... 158 °F)Storage temperature -40 ... 85 °C (-40 ... 185 °F)Mechanical specificationsDegree of protection IP67Connection M12 x 1 connectorMaterial Housing PBTBase diecast aluminumEncapsulation compound CY 221/HY 2966Installation Distance between two heads Multiplex on: ≥ 100 mm Multiplex off: ≥ 150 mmMass approx. 380 gCompliance with standards and direc-tivesDirective conformity R&TTE Directive 1995/5/EC EN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006Standard conformity Ø5.3 M20 x 1.580 1165 65 LED 40 7 16M12 x 1 Shield+A-B12341423
Release date: 2014-02-21 09:23 Date of issue: 2014-02-21 204623_eng.xml2Germany: +49 621 776 4411Pepperl+Fuchs GroupRefer to “General Notes Relating to Pepperl+Fuchs Product Information”.USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.comfa-info@de.pepperl-fuchs.comIQH1-FP-V1Read/write headAccessoriesIQC21-50PData carrierIQC21-58Data carrierIQC22-C5Data carrierIQC33-20Data carrierIQC33-30Data carrierIQC33-50Data carrierV1-G-5M-PUR-ABG-V1-WConnecting cable, M12 to M12, PUR ca-ble 4-pin, shieldedV1-G-10M-PUR-ABG-V1-WConnecting cable, M12 to M12, PUR ca-ble 4-pin, shieldedIQC24-27-T12Data carrierIQC31-22-T9Data carrierIQC22-22CT-T9Data carrierIQC22-C1 UNPRINTEDData carrierAB-FPMounting aidElectromagnetic compatibility EN 61000-6-2, EN 61000-6-4Degree of protection EN 60529RFID ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3 ,Approvals and certificatesFCC approval This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NotesThis equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference when the equipment is operated in a commercial environ-ment. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may cause harmful interferenceto radio communications. Operation of this equipment in a residential area is likely to causeharmful interference in which case the user will be required to correct the interference at hisown expense.

Navigation menu