Pepperl Fuchs MVI Cordless, single voltage identification system User Manual Appendix

Pepperl + Fuchs Inc Cordless, single voltage identification system Appendix

Contents

Appendix

  IDENT-M System V AppendixSubject to reasonable modifications due to technical advances                    Copyright Pepperl+Fuchs, Printed in GermanyPepperl+Fuchs Group     Tel.: Germany (062107 76-0      USA (330) 4 25 35 35     Singapore 7 79 90 91    Internet http://www/pepperl-fuchs.comAdditional InformationNOTE: This equipment has been tested and found to comply with the limits for a Class A digitaldevice, pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment.  This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may cause harmful interference toradio communications.  Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at his own expense.Any modifications to this device not expressly approved by the party responsible for FCC relatedcompliance testing could void the user’s authority to operate the system.The FFC equipment authorizations has been granted for a system comprised of the followingcomponents:MVI-D2-2HRX ControllerMVH2000-F15 AntennaMVC-60-xxxK Data CarrierConnection between the MVI-D2-2HRX and the MVH2000-F15 is established via theconnection cable that is an integral part of the Antenna.  If longer distances are to becovered the shielded cables must be used.Pepperl+Fuchs strongly suggest using the accessory cables MVK-xx.

Navigation menu