Phicomm 2017S7US01 PHICOMM Smart Scale S7 User Manual S7OS 811002296 20170928 V1 1
Phicomm (Shanghai) Co., Ltd., PHICOMM Smart Scale S7 S7OS 811002296 20170928 V1 1
Phicomm >
Users Manual
20170914 V1.1 内容修改、添加 20170928 90mm 120mm Über PHICOMM Smart Scale S7 Die PHICOMM Health App können Sie über den App Store (bzw. Google Play Store) herunterladen. Plug-in Elektroden PHICOMM Health App Stromversorgung RESET Inbetriebnahme mit der App ① Stellen Sie sicher, dass Ihr Samrtphone mit Netzwerk verbunden ist. ② Drücken Sie die RESET-Taste, und halten Sie sie 5 Sekunden lang gedrückt. Während des Verbindungsaufbaus wird auf dem Display abwechselnd angezeigt und die Signalleuchte blinkt. Hand-Elektroden LED mit Netzwerk verbinden wiegen mit 4 Elektroden abwechselnd links/rechts blinken Anzeige blinkt dreimal wiegen mit 8 Elektroden Signalleuchte dreimal von links nach rechts blinken dauernd leuchtet: mit Netzwerk verbunden blinkt: Verbindung unterbrochen Aktualisierung ③ Öffnen Sie die PHICOMM Health App. Nach Registrierung/Einloggen tippen Sie auf “Konto mit Gerät verknüpfen”. Wählen Sie “WLAN konfigurieren” und befolgen Sie die Anweisungen, um das Gerät mit dem Smartphone des ersten Benutzers zu koppeln. Andere Benutzer können das Gerät durch Scannen des QR-Codes von dem ersten Benutzer mit ihrem jeweiligen Smartphone koppeln. Achten Sie darauf , dass keine Verbindung zwischen der Waage und Ihrem Smartphone hergestellt wird, wenn 1.die Waage nicht rückgesetzt ist; 2.falsches WLAN-Passwort eingegeben ist; 3.ein 5G-Router verwendet wird; 4.der Router mit zu vielen Geräten verbunden ist; 5.WLAN-Signal zu schwach ist; 6.AP-Isolationsfunktion vom Router aktiv ist; 7.der Router sich im Dualbandmodus befindet; 8.der Router geschützt ist. Fehlermeldungen Stellen Sie die Waage auf einen harten, flachen Untergrund auf. Halten Sie die Hand-Elektroden und steigen Sie barfuß auf die Waage. Stellen Sie sicher, dass alle Ihre Finger die 4 Hand-Elektroden berühren und Ihre Füße mit 4 Elektroden der Waage guten Kontakt haben. Die Anzeige im Display blinkt zunächst dreimal und dann blinkt das Symbol “ ” von links nach rechts. Das Symbols “ ” verschwindet, sobald die Messung abgeschlossen ist. Dann wird Ihr genaues Gewicht angezeigt. Nun können Sie auf der PHICOMM Health App Ihre Messergebnisse empfangen. “Lo”: Batterie leer. Laden Sie die Waage rechtzeitig auf. “Err”: Messbereich (150 kg) überschritten. Sicherheitshinweise 1. Stellen Sie die Waage weder auf einen nassen oder rutschigen Untergrund noch betreten Sie die Waage mit nassen Füßen, um ein Ausrutschen zu vermeiden. 2. Stellen Sie sich in den mittleren Breich der Plattform, um Absturzgefahr zu vermeiden. 3. Schützen Sie das Gerät vor Feuchtigkeit. 4. Reinigen Sie die Waage nur mit einem feuchten Tuch. Verwenden Sie dafür nur neutrale Reinigungsmittel. 5. Abweichende Ergebnisse können bei Sportlern oder besonderen Personengruppen auftreten. Schwangere, Personen mit Herzschrittmachern oder anderen Implantaten dürfen das Gerät nicht benutzen. Verbinden der Waage mit Hand-Elektroden Technische Daten Um die Waage mit den Hand-Elektroden zu verbinden, stecken Sie das eine Ende des Hand-Elektroden-Kabels in die Buchse der Hand-Elektroden und das andere Ende in die entsprechende Buchse der Waage. Größe: 330x280x15mm Nettogewicht: 2,0kg Messbereich:5kg-150kg Messeinheit:kg Teilung: 50g Drahtlose Verbindung: WLAN Batteriekapazität: 2000mAh Gehäusematerial: Hartglas+ABS-Kunststoff System erforderlich: Android 4.4 und höher /iOS8.0 und höher Dieses Produkt ist kein medizinisches Gerät und sollte nicht zur Diagnose, Behandlung oder Verhinderung von Krankheiten verwendet werden. Gewichtseinheit Akkuindikator Fortschrittsbalken Benutzung Körpergewicht wird in Kilogramm angezeigt. dauernd leuchtet: völlig geladen EG-KONFORMITÄT Wir, Phicomm (Shanghai) Co., Ltd., mit Sitz in No. 3666, Sixian Rd. Songjiang District Shanghai 201616 China erklärt in alleiniger Verantwortung, dass PHICOMM Smart Scale S7 in Übereinstimmung mit den relevanten Bestimmungen der Richtlinie 2014/53/EG entspricht. Das Produkt enthält folgende Kennzeichnung: Die Konformitätserklärung finden Sie unter: www.phicomm.de ! Dieses Gerät darf in allen Mitgliedstaaten der EU betrieben werden. ! Halten Sie sich an die jeweils am Ort des Gebrauchs gültigen Bestimmungen. Die Verwendung dieses Gerätes kann in einigen Mitgliedstaaten der Europäischen Union (EU) eingeschränkt sein. Spezifische Absorptionsrate (SAR) Das mobile Gerät ist ein Funksender und -empfänger. Es ist so ausgelegt, dass die von internationalen Richtlinien empfohlene maximale Funkwellenbelastung nicht überschritten wird. Diese Richtlinien wurden von der unabhängigen wissenschaftlichen Organisation ICNIRP entwickelt und enthalten Sicherheitsmargen zum Schutz aller Personen, unabhängig von deren Alter und Gesundheitszustand. In diesen Richtlinien wird eine Maßeinheit verwendet, die als Spezifische Absorptionsrate oder SAR bekannt ist. Die SAR-Grenze für das Gerät beträgt 2 W/kg und der im Rahmen von Tests am Körper (mit 0 cm Abstand zum Körper) ermittelte höchste Wert lag bei 0.218 W/kg. Wenn SAR unter Verwendung der höchsten Sendeleistung des Geräts gemessen wurde, ist der tatsächliche SAR-Wert dieses Geräts während des Betriebs typischerweise unter den obengenannten Werten. Der Grund besteht in dem automatischen Wechsel zwischen Leistungsstufen des Geräts, der sicherstellt, dass das Gerät nur die tatsächlich zum Erreichen des Netzwerks benötigte minimale Leistung verwendet. * Die Tests wurden nach EN 50566, EN 62479, EN 62209-2 durchgeführt. FCC ID:YJY2017S7US01 Hersteller: Phicomm (Shanghai) Co., Ltd. No.3666, Sixian Rd., Songjiang District, Shanghai, P. R. China Made in China Dieses Funkgerät arbeitet im 2,4-GHz-Frequezband (IEEE 802.11 b/g/n) und die maximale Hochfrequenzleistung beträgt 20 dBm. blinkt: wird noch geladen About PHICOMM Smart Scale S7 Search and download PHICOMM Health App from App store/Google play. Plug-in Electrode Power RESET LED Weighing with eight electrodes Flashing three times (left to right) Upgrading Processing bar Bind APP with Scale ① Make sure the mobile is connected with WiFi and WiFi signal is in good condition. ② Long press button RESET for 5 seconds to start internet connection configuration for Scale. is flashing and is flashing on the screen. Hand-Electrode Internet connecting indicator Flashing Download and Install APP Note, if the following situation happens, the internet configuration fails: 1.The Scale is not in RESET status; 2. Wrong WiFi access password; 3.The router uses 5G band; 4.The router connection reaches the limit; 5.Weak WiFi signal; 6.The router turns on wireless AP isolation mode; 7.The router is in dual frequency mode; 8.The router is in protection mode,etc. Start Measurement Prompt Place the scale on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement. Hold the hand-electrodes and step on the scale barefoot. Make sure all of your fingers and feet contact electrodes (shown as the illustration). After the numbers on the screen flash for 3 times, the symbol “ ” is displayed. When the symbol “ ” disapears, the body weight will be shown. Meanwhile, you may check PHICOMM Health App for more detailed body information. If “Lo” is displayed, it indicates the power is low, please charge the scale. If “Err” is displayed, it indicates the weight exceeds maximum range 330lb. Connect Hand-Electrodes Take the electrode cable from the hand-electrodes, connect the electrodes on the hand-electrodes and the scale with these cables. Weigh with four electrodes Flashing three times 1. Do not place the scale on a wet floor. To avoid slip, please keep the platform and feet dry. 2. To avoid possible injury, do not step on the edge of the platform. 3. Do not place the scale in a humid environment. 4. Clean the scale with a damp cloth, to which you may apply a little detergent if necessary. 5. The measurement is not reliable for athletes and the minorities with speical conditions, bodybuilders. The scale must not be used by persons with medical implants (e.g. heart pacemakers). Do not use during pregnancy. Specifications WiFi ON:Internet connected FLASH:Internet disconnected Charging indicator ON: Full FLASH:Charging Note The body information is for reference only, not for medical advice. ③ Start PHICOMM Health App, register/log in an account, tap on “Hand-Electrode”.Select “Configure WiFi” and follow the instructions to bind PHICOMM Smart Scale S7 for the first user. Other member users may bind PHICOMM Smart Scale S7 via scanning QR Code of the first user. Set Measurement Unit The scale uses pound (lb.) as measurement unit. Size: 330x280x15mm Net Weight: 4.4lb Weight Capacity:11lb-330lb Measurement Unit:lb Weight Increments: 0.11lb Internet Connection: WiFi Battery Capacity:: 2000mAh Material: Tempered glass+ABS System Requiremen: Andriod4.4/iOS8.0 and above EC CONFORMITY Phicomm (Shanghai) Co. Ltd No. 3666, Sixian Rd. Songjiang District Shanghai 201616 China Declare under our sole responsibility that our product PHICOMM Smart Scale S7 is in conformity with the appropriate standards following the provisions of the EU directive RED (2014/53/EU). The product contains the following marking: For the Declaration of Conformity, please visit our website: www.phicomm.de ! This device may be operated in all Member States of the EU. ! Keep up to the regulations valid at the point of consumption. The use of this device may be restricted in some Member States of the European Union (EU). This radio equipment operates with the following frequency bands and maximum radio-frequency power WiFi 2.4GHz(IEEE 802.11/b/g/n): 20 dBm Bedienungsanleitung FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level, and placed in positions that simulate RF exposure in usage near the body with the separation of 0 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. For this device, the highest reported SAR value for usage near the body is 0.770 W/kg. SAR compliance for body-worn operation is based on a separation distance of 0 mm between the unit and the human body. Carry this device at 0 mm away from your body to ensure RF exposure level compliant or lower to the reported level. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified. Specific Absorption Rate (SAR) The mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for the device is 2 W/kg and the highest SAR value for this mobile device when tested at the body was 0.218 W/kg with 0 mm distance. As SAR is measured utilizing the device's highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum power required to communicate with the network. * The tests are carried out in accordance with EN 50566, EN 62479, EN 62209-2. User Guide FCC ID:YJY2017S7US01 Manufacturer: Phicomm (Shanghai) Co., Ltd. No.3666, Sixian Rd., Songjiang District, Shanghai, P. R. China Made in China S7OS 811002296 陈秋儿 20170928 20170928 王俊 20170928 V1.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : S7OS_811002296_说明书_20170928_V1.1 Metadata Date : 2017:09:29 09:28:04+08:00 Modify Date : 2017:09:29 09:28:04+08:00 Create Date : 2017:09:29 09:28:03+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 176 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11022 bytes, use -b option to extract) Instance ID : uuid:bcdcbf95-189c-4abb-8170-0919077f4ce7 Document ID : xmp.did:E54B7541B5A4E7118667F2F5DFE94C07 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:30f4a09c-94ab-4206-b499-417b117c0e8e Derived From Document ID : xmp.did:86C422B63BA4E7118667F2F5DFE94C07 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:4B706B463BF7E611A3E1A1507551C209, xmp.iid:E54B7541B5A4E7118667F2F5DFE94C07 History When : 2017:02:21 11:53:12+08:00, 2017:09:29 09:26:45+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Ingredients File Path : D:\ID\项目\S7-2017\包材\包材图纸\使用的包材\二维码最终版2017-5-2.PNG Ingredients Document ID : 0 Ingredients Instance ID : 0 Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 2594.002905 Max Page Size H : 1708.471600 Max Page Size Unit : Millimeters Font Name : HelveticaNeueLT-Light, LaoUI, AdobeSongStd-Light, MicrosoftYaHei Font Family : HelveticaNeue LT 45 Light, Lao UI, Adobe 宋体 Std, 微软雅黑 Font Face : Regular, Regular, L, Regular Font Type : TrueType, Open Type, Open Type, Open Type Font Version : Version 6.1; 2002, Version 5.00, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, Version 6.02 Font Composite : False, False, False, False Font File Name : Helvetica LT 45 Light_0.ttf, Laoui.ttf, AdobeSongStd-Light.otf, msyh.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 152 C, PANTONE Cool Gray 7 C Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE Cool Gray 7 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 63.137299 Swatch Groups Colorants A : 0 Swatch Groups Colorants B : -1 Producer : Adobe PDF library 10.01 Page Count : 1 Creator : Adobe Illustrator(R) 16.0 For : Xu04 Zhang/����04/PD/SMART HOME, Bounding Box : 0 -3723 7334 1253 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools