Philips Consumer Lifestyle CED750 7" TFT DVD PLAYER / AV SYSTEM In-Car Entertainment User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1031735
Application ID	2oQMqznLCWu6sBpyT1yzzg==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	300.87kB (3760855 bits)
Date Submitted	2008-11-18 00:00:00
Date Available	2008-11-19 00:00:00
Creation Date	2008-11-06 11:51:55
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-11-06 11:52:28
Document Title	User Manual 1
Document Creator	Adobe InDesign Server CS2 (4.0.6)

© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 000000000000
Register your product and get support at
www.philips.com/welcome
CED750/55
EN User manual
Random play
26
7 Browse pictures		 27
1 Important		
2 Your Car Entertainment System		
10
Safety
Notice
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Get started		 12
Install the car audio
Install remote control battery
Turn on
Adjust screen
Load discs
Insert USB device
Insert SD/MMC card
Pairing bluetooth devices
Set clock
12
18
18
18
18
19
19
19
19
4 Listen to radio		 21
Tune to a radio station automatically
Tune to a radio station manually
Select tuner sensitivity
Store radio stations in memory
Tune to a preset station
21
21
21
21
22
5 Play video		 23
Play/Pause
Skip/Search
Select audio language
Select subtitle language
Repeat
Selecting a different camera angle
6 Play audio files
Play/Pause
Skip/Search
Intro play
Repeat
23
23
23
23
23
24
Rotate pictures
Zoom
Select slide show duration
27
27
27
8 Make/receive phone call		 28
Make a call
Receive call
Call transfer
28
28
28
9 Adjust sound		 29
Adjust volume
Mute
Select preset equalizer
Adjut fader/balance
29
29
29
29
10 Adjust settings		 30
Adjust general system settings
Adjust sound settings
Adjust video settings
Adjust bluetooth settings
Adjust language settings
Adjust volume settings
Adjust DVD rating
30
30
31
31
32
32
33
11 Others		 34
Listen to other devices
Reset
Remove the unit
Replace fuse
34
34
34
34
12 Product information		 36
13 Troubleshooting		 38
14 Glossary		 39
25
25
25
25
25
EN
Eng lis h
Contents
1 Important
Safety
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Read and understand all instructions
before you use your system. If damage is
caused by failure to follow instructions, the
warranty does not apply.
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
This unit is designed for negative ground
(earth) 12 V DC operation only.
To reduce the risk of traffic accident, do no
watch video during driving.
To ensure safe driving, adjust the volume to
a safe and comfortable level.
Improper fuses can cause damage or
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
system, remote control or remote control
batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the system.
Clean the system and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the system.
Never place any objects other than discs
into the system.
Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the system screen!
Never touch, push, rub or strike the screen
with any object.
EN
Notice
FCC Declaration of conformity
Model number: PHILIPS CED750/55
Trade Name: Philips
Responsible Party:
Philips Consumer Electronics
P. O. Box 671539
Marietta, GA 30006-0026
1-800-PHILIPS (744-5477)
Notice of compliance
The set complies with the FCC-Rules, Part 15
and with 21 CFR 1040.10. Operation is subject
to the following two conditions:
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
FCC Notice (For U.S. and Canada)
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device,pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Relocate the receiving antenna.
– Increase the separation between the
equipment and receiver
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Offical DivX® Certified product. Plays all
versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files.
“DivX, DivX” Certified, and associated logos
are trademarks of DivX, Inc. and are used under
license.
This system includes these labels:
Class II equipment symbol
Recycling
Eng lis h
– Consult the dealer or an experienced radio/
TV technician for help.
IMPORTANT!
modifications not authorized by the
manufacturer may void users authority to
operate this device.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
This symbol indicates that the unit has a double
insulation system.
This product complies with the radio
interference requirements of the European
Community.
EN
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC+2006/95/EC
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2008 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
EN
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With the in-car audio system, you and your
passengers can enjoy:
• DVD, VCD or DivX video
• Music CDs
• FM or AM (MW) radio
• MP3/WMA audio from discs, USB devices,
SD/MMC cards and your mobile phone
• Audio from external devices
You can also make or receive phone call with
the system and to view JPEG pictures from the
connected USB or SD/MMC device.
What’s in the box
Check and identify the contents of your
package:
Eng lis h
2 Your Car
Entertainment
System
a Car audio system
b Trim plate
c Standard connector
d Remote control
e Removal keys x 2 pcs
f Rubber cushion
g Screws M5x6 mm x 4 pcs
h User manual
i Quick start guide
j Aux in cable
EN
Overview of the main unit
EN
b
Eng lis h
ji
a OPEN
• Open or close the TFT screen.
b INTRO.SCH
• Turn scan play on or off.
• Search for radio station.
c EQ
• Select equalizer (EQ) setting.
d DISP
• Display play mode and its related
information.
•
f e
Eject disc.
f 4 WAY NAVIGATION
Move to left/right
•
Tune for radio station.
Skip/search for track.
• Move up/down
Select tuner band.
Fast forward/backward.
Press down
•
Confirm selection.
Start play or pause.
EN
•
USB socket
h SD/MMC card slot
Overview of the remote
control
i Disc slot
j AUX IN
• External equipment audio-in socket
k RESET
• Restore default settings.
•
Terminate call.
•
•
Answer phone.
Dial number.
n SOURCE
• Select audio source.
•
•
•
Turn the unit on or off.
Turn mute on or off.
Adjust volume.
•
Set screen brightness and contrast.
TLT
• Adjust tilt of the screen.
•
TLT
Adjust tilt of the TFT screen.
b OPEN/CLOSE
• Open or close the TFT screen.
c SUBTITLE
• Select DVD or DivX subtitle language.
d ANGLE
• Select a difference angle/version of
the current DVD scene.
10
EN
f
•
Change to wide screen display.
g REPT A->B
• Set A-B repeat play.
h REPT
• Select repeat play mode.
•
Return to previous menu.
j VOLUME +/• Adjust volume.
k EQ
• Select equalizer (EQ) setting.
•
Mute or unmute audio.
m DISP
• Display play information.
n CLEAR
• Delete an entered number.
o Numeric keypad
•
•
•
Answer phone.
Dial number.
•
Terminate call.
Select tuner band.
Fast forward/backward.
SEL
Confirm selection.
Start play or pause.
Eng lis h
e DISC AUDIO
• Select audio channel source.
v MENU
• Access system menu
w GOTO
• Select track/chapter.
•
Stop play.
y DISC MENU
• Return to DVD main menu.
•
Adjust brightness/contrast.
{ SOURCE
• Select connected device.
| TITLE
• Access or exit DVD title menu.
•
PWR
Turn the unit on or off.
r SHUFF #
• Turn random play on or off.
• # symbol for phone call.
s INTRO *
• Turn intro play on or off.
• * symbal for phone call.
t AUDIO
• Access audio setting menu.
u Navigation buttons
•
Tune for radio station.
Skip/search for track.
•
EN
11
3 Get started
Caution
• Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your system. The
model number and serial number are on the
bottom of your system. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
•
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
Notes on speaker connection
• Never connect speaker wires to the metal
body or chassis of the car.
• Never connect speaker wires with stripes
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
a Trim plate
b Standard connector
c Rubber cushion
• This unit is designed for negative ground (earth) 12 V
d Screw x 4 pcs
•
e Removal keys x 2 pcs
•
•
•
•
•
•
•
DC operation only.
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
To avoid short-circuit: before you connect, ensure that
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
tape.
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe
and secure installation.
Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
12
EN
Connect wires: ISO connectors
Caution
• Ensure that all loose leads are insulated with electrical
tape.
Pull out the ISO connectors from the car
dashboard and connect them to the bigger
end of the supplied standard connector.
Eng lis h
Connect wires: without ISO
connectors
Caution
• Ensure that all loose leads are insulated with electrical
tape.
Cut off the bigger end of the supplied
standard connector.
Connect the other end of supplied
standard connector to the unit.
Check the car’s wiring carefully, then
connect them to the standard connector.
Do the other connections, if applicable.
ANTENNA
SUB OUT
PARKING
REAR LINE OUT R
REAR LINE OUT L
FRONT LINE OUT R
FRONT LINE OUT L
CAMERA IN
VIDEO OUT 2
VIDEO OUT 1
CAMERA
EN
13
Connector Connect to
Black wire A metal surface of the
car
First connect the black
ground (earth) lead,
then connect the yellow
and red power supply
leads.
Blue wire The electric antenna
control lead or power
supply lead of the
antenna booster
If there is no electric
antenna or antenna
booster, or it is manually
operated telescopic
antenna, it is not
necessary to connect
this lead.
Yellow wire The +12V car battery
which is live at all times.
Orange/
Illumination switch
white wire
14
EN
The +12V power
terminal which is live in
the accessory (ACC)
position of the ignition
switch
If there is no accessory
position, connect to
the +12V car battery
terminal that is always
live. Be sure to connect
the black ground (earth)
lead to a metal surface
of the car first.
Green and Left speaker (Rear)
green/black
wires
White and Left speaker (Front)
white/black
wires
Gray and Right speaker (Front)
gray/black
wires
Purple and Right speaker (Rear)
purple/
black wires
Red wire
Connect the supplied standard connector
to the unit.
Do the other connections, if applicable.
ANTENNA
Eng lis h
SUB OUT
PARKING
REAR LINE OUT R
REAR LINE OUT L
FRONT LINE OUT R
FRONT LINE OUT L
CAMERA IN
VIDEO OUT 2
VIDEO OUT 1
CAMERA
Connect parking brake cable
EN
15
Connect reverse driving cable
Mount in the dashboard
5m
Note
• For proper operation of the DVD player, the chassis
16
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car attery.
• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
• If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
Ensure that car dashboard opening is
within these measurements:
EN
183
mm
53.5mm
•
must be mounted within 20 degree horizontal. Ensure
that the unit is mounted within this limitation.
Check wire connection before you mount the unit into
a car. If preset radio stations are lost when the ignition
key is turned OFF and then back ON, reconnect the
red leads crosswise to the yellow ones.
Remove the two transport screws on the
top of the unit.
Eng lis h
Remove the mounting sleeve with the
removal keys.
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
•
If the unit is not fixed by sleeve but
by the supplied screws, skip this step.
Slide the unit into the dashboard until a
click sound is heard.
Attach the trim plate.
Reconnect the negative terminal of the car
battery.
Place the rubber cushion over the end of
the bolt.
EN
17
Install remote control battery
Caution
NOte: To change the OSD language,
see “Adjust Settings” chapter.
•
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
To turn off the system, press the knob
for 3 seconds.
» The screen is closed automatically.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
• Perchlorate Material - special handling may apply. See
Adjust screen
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
Open the battery compartment.
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
Note
• Do not watch video or adjust settings while driving, as it
may lead to distraction and cause an accident.
Press OPEN/CLOSE to close the screen.
To open the scree, press OPEN/CLOSE
again.
To adjust the tilt of the screen, press
TLT
Load discs
Turn on
18
Press the knob to turn on the system.
» The screen comes out automatically.
» The available OSD langagues is
displayed on the screen.
Select a language by touch on it.
» The OSD language is changed to the
selected language immediately.
EN
Insert the disc into the disc slot with label
side facing up.
» Play resumes from the point where it
was last stopped.
itninggininCChhininaa
PPrrinint
» To remove the disc, press the
button.
» When the disc is ejected, the
unit switches to TUNER mode
automatically.
1
Open the USB/SD/MMC card cover.
Tip
• The system supports SDHC card. (see ‘SDHC’ on page
39)
Remove the SD/MMC card
Insert the USB device into the USB socket.
» The unit starts playing from the USB
device automatically.
Press SOURCE to switch the system to
other mode.
Press the card until you hear a click sound.
» The card is now disengaged.
Remove the SD or MMC card.
Pairing bluetooth devices
You can pair your bluetooth device with the
system as follows:
Remove the USB device
Press SOURCE to switch the system to
other mode.
Turn on bluetooth function on the device.
Setup bluetooth fuction on your device.
Select “CED750” in the pairing list.
Enter default password “0000”.
» [Connect] is displayed on the panel if
pairing succeeds.
Set clock
Press MENU, if necessary.
» The main menu is displayed.
Remove the USB device.
Insert SD/MMC card
Open the USB/SD/MMC card cover.
Insert the SD or MMC card into the card
slot.
» The unit starts playing from the SD/
MMC card automatically.
Touch [Setting].
» The setup menu is displayed.
EN
19
Eng lis h
Insert USB device
3
20
Touch [General] , if necessary.
To select clock mode, repeatedly touch the
mode in the [Clock mode] line.
• [12hr] : 12 hour mode
• [24hr] : 24 hour mode
To set time, touch hour or minute first,
then touch or .
Touch
EN
to exit.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 22
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:445074a1-b413-4aa8-ac61-200a0817c19a
Modify Date                     : 2008:11:06 11:52:28+01:00
Create Date                     : 2008:11:06 11:51:55+01:00
Metadata Date                   : 2008:11:06 11:52:28+01:00
Document ID                     : uuid:4298f773-100d-48a5-82be-7bc82e666fd5
Format                          : application/pdf
Creator                         : Adobe InDesign Server CS2 (4.0.6)
Producer                        : Adobe PDF Library 7.0

EXIF Metadata provided by EXIF.tools