Philips Electronics M108 15" LCD Color Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	226767
Application ID	v7pCZvvUjF/l5RpHu3CzpA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.71kB (146369 bits)
Date Submitted	2002-02-19 00:00:00
Date Available	2002-02-19 00:00:00
Creation Date	2002-02-19 13:32:58
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-02-19 13:33:29
Document Title	User Manual

FCC ID: A3KM108
Exhibit 3
Installstion and Operating instructions
Product Information
Product Features • Technical Specifications • Resolution & Preset
Modes • Philips Pixel Defect Policy • Automatic Power Saving •
Physical Specification • Pin Assignment • Product Views • Physical
Function
Product Features
150P3A / 150P3C
Ultra Slim Frame
15-inch color LCD monitor with excellent display performance
Stereo 48W PMPO (2 x 2W RMS)
Dual input- accepts both DVI Digital and VGA analog inputs
Embedded universal AC power supply
Adjustable viewing height
Portrait and landscape display
AUTO adjustment optimizes picture quality
User installable bezel for optional protective cover choice
Optional USB hub
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type
TFT LCD
• Screen size
15" visual
• Pixel Pitch
0.297 x 0.297mm (15.0")
• LCD Panel type
1024 x 768 pixels
R.G.B. vertical stripe
Anti-glare polarizer hardness
• Effective viewing
area
304.1 x 228.1mm (15.0")
• Display Colors
16.7M colors
SCANNING
• Vertical refresh
rate
• Horizontal
56Hz-76Hz
30KHz-61KHz
FCC ID: A3KM108
• Horizontal
frequency
30KHz-61KHz
VIDEO
• Video dot rate
80 MHz
• Input impedance
Video
75 ohm
Sync
5K6 ohm
• Input signal levels 700m Vpp
Separate sync
Composite sync
• Sync input signal Sync on Green
• Sync polarities
Positive and negative
• Input Frequency
XGA Hsync
SVGA Hsync
VGA Hsync
• Video interface
48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
Dual input: Both Analog (D-Sub) and DVI-D
(Digital only) are available. It can be switching
via OSD selection.
AUDIO
• Input signal level
0.7 Vpp
• Headphone out
signal level
32 Ohm 20+20mW
• Input signal
connector
3.5mm mini jack
• Loudspeaker
2+2W stereo front firing (PMPO: 48W)
MICROPHONE
• Sensitivity
-55dB re 1V/ubar at 1KHz
• Output
impedance
2.2K Ohm max.
• Directivity
-5dB at 180°
• Frequency range 300Hz-3KHz
OPTICAL CHARACTERISTICS
• Contrast ratio
350 (typ.)
• Brightness
250 cd/m2 (typ.)
• Peak contrast
angle
6 o'clock
• White
x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338
FCC ID: A3KM108
• White
Chromacity
x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338
(at 6500° K)
Upper >50° (typ.)
• Viewing Angle
(C/R >5)
Lower >60° (typ.)
Left >75 ° (typ.)
Right >75 ° (typ.)
• Response time
<=30ms (typ.)
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
• Maximum
• Recommended
1024 x 768 at 75Hz
1024 x 768 at 60Hz
14 user definable modes
14 factory preset modes:
H. freq (KHz)
Resolution
V. freq (Hz)
31.469
640*350
70.086
31.469
720*400
70.087
31.469
640*480
59.940
35.000
640*480
67.000
37.861
640*480
72.809
37.500
640*480
75.000
35.156
800*600
56.250
37.879
800*600
60.317
48.077
800*600
72.188
46.875
800*600
75.000
49.700
832*624
75.000
48.363
1024*768
60.004
56.476
1024*768
70.069
60.023
1024*768
75.029
RETURN TO TOP OF THE PAGE
FCC ID: A3KM108
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when not in use. And if
an input from a keyboard, mouse or other input device is detected, the monitor will
automatically "wake up". The following table shows the power consumption and
signaling of this automatic power saving features:
Power Management Definition
VESA
Mode
Video
Hsync
Vsync
Power
Used
LED
color
ON
Active
Yes
Yes
< 30W
Green
Stand-by
Blanked
No
Yes
< 2W
Amber
Suspend
Blanked
Yes
No
< 2W
Amber
OFF
Blanked
No
No
< 2W
Amber
This monitor is ENERGY STAR® compliant. As an ENERGY STAR®
Partner, PHILIPS has determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimension (WxHxD) *
343 x 354 x 179 mm (incl. Pedestal)
• Weight *
4.6 Kg
• Swivel
+/ - 175°
• Portrait display
90° rotation counter clockwise
• Tilt (Forward /
Backward)
- 5° / 25°
• Power supply
100 — 240 VAC, 50/60 Hz
• Power consumption
23 W (typ.)
• Temperature (operating) 5° C to 40° C
• Relative humidity
• System MTBF
• Cabinet color
20% to 80%
50K hrs (CCFL 40Khrs)
150P3A: Light Gray
150P3C: Black
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
FCC ID: A3KM108
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of
eight contacts. Signal pin assignments are listed in the table:
Pin Signal
No. Assignment
Pin Signal
No. Assignment
Pin Signal
No. Assignment
T.M.D.S.
Data2T.M.D.S.
Data2+
T.M.D.S.
Data2/4 Shield
T.M.D.S.
Data1T.M.D.S.
10
Data1+
T.M.D.S.
11
Data1/3 Shield
17
No connect
12 No connect
20 No connect
No connect
13 No connect
21 No connect
DDC Clock
14 +5V Power
22
DDC Data
15
No connect
16 Hot Plug Detect
Ground (for
+5V)
T.M.D.S.
Data0T.M.D.S.
18
Data0+
T.M.D.S.
19
Data0/5 Shield
T.M.D.S. Clock
Shield
T.M.D.S.
23
Clock+
T.M.D.S.
24
Clock-
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
Assignment
No.
Pin
Assignment
No.
Red video input
DDC +5V
Green video input
10 Logic ground
Blue video input
11
Identical output connected to pin 10
Identical output connected to pin 10
Serial data line
12
(SDA)
Cable detect
13 H. Sync / H+V
Red video ground
14 V. Sync
Green video ground
15
Data clock line
(SCL)
FCC ID: A3KM108
Blue video ground
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
1) Tilt
2) Swivel
3) Height
adjustment
FCC ID: A3KM108
4) Portrait display
Turn monitor from landscape view to portrait view
4.1) Tilt the monitor body at an angle
4.2) Rotate the monitor body 90 degrees counter
clockwise.
FCC ID: A3KM108
Installing your LCD Monitor
Your LCD Monitor : Front View Product Description • Connecting to
Your PC • Remove and Re-install the Base • Getting Started •
Optimizing Performance • Accessories (optional)
Front View Product Description
UP and DOWN buttons are used when adjusting the
OSD of your monitor
LEFT and RIGHT buttons, like the UP and DOWN
buttons, are also used in adjusting the OSD of your
monitor.
BRIGHTNESS hotkey. When the UP and DOWN
arrow buttons are pressed, the adjustment controls for
the BRIGHTNESS will show up.
OK button which when pressed will take you to the
OSD controls
POWER button switches your monitor on
Automatically adjust the horizontal position, vertical
position, phase and clock setting.
FCC ID: A3KM108
1. Audio power on/off and volulme adjustment
2. Audio power LED
3. Mute on/off
RETURN TO TOP OF THE PAGE
Side View
1. Headphone Jack
2. Microphone Jack
RETURN TO TOP OF THE PAGE
Rear View
FCC ID: A3KM108
1. Audio in
2. Mic out
3. DC 12V in
1. AC power in
2. DC 12V out for Philips Multimedia Base
only
3. D-SUB Connector
4. DVI-D Connector
RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at
1024x768@60Hz (for14"/15") or 1280x1024, 60Hz (for17"/18").
Note: You can check the current display settings by pressing
the "OK" button once. Go into the Product Information. The
current display mode is shown on the item called
RESOLUTION.
FCC ID: A3KM108
You can also install the Flat Panel Adjust (FP Adjust) program, a program
for getting the best performance out of your monitor, included in this CD. A
step-by-step instructions is provided to guide you through the installtion
process. Click on the link to know more about this program.
More about
FP_setup01.exe
RETURN TO TOP OF THE PAGE
FCC ID: A3KM108
This monitor is equipped with a function for saving energy which supports
the VESA Display Power Management Signaling (DPMS) standard. This
means that the monitor must be connected to a computer which supports
VESA DPMS to fulfill the requirements in the NUTEK specification
803299/94. Time settings are adjusted from the system unit by software.
From indicated inactivity to Power Saving Position A2, the total time must
not be set to more than 70 minutes.
LED
NUTEK
VESA State
Power Consumption
Indicator
Normal operation
ON
Green
< 30 W
Power Saving
Position A1
Suspend
Amber
<2W
Power Saving
Position A2
OFF
Amber
< 2W
As an ENERGY STAR® Partner, PHILIPS has determined
that this product meets the ENERGY STAR® guidelines for
energy efficiency.
We recommend you switch off the monitor when it is not in use for
quite a long time.
RETURN TO TOP OF THE PAGE
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a
FCC ID: A3KM108
computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or
excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
RETURN TO TOP OF THE PAGE
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimites des
appareils numériques de class B,aux termes de l'article 15 Des
règles de la FCC. Ces limites sont conçues de façon à fourir une
protection raisonnable contre les interférences nuisibles dans le
cadre d'une installation résidentielle. CET appareil produit, utilise et
peut émettre des hyperfréquences qui, si l'appareil n'est pas
installé et utilisé selon les consignes données, peuvent causer des
interférences nuisibles aux communications radio. Cependant, rien
ne peut garantir l'absence d'interférences dans le cadre d'une
installation particulière. Si cet appareil est la cause d'interférences
nuisibles pour la réception des signaux de radio ou de télévision,
ce qui peut être décelé en fermant l'équipement, puis en le
remettant en fonction, l'utilisateur pourrait essayer de corriger la
situation en prenant les mesures suivantes:
Réorienter ou déplacer l'antenne de réception.
Augmenter la distance entre l'équipement et le récepteur.
Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu l'approbation des services
compétents en matière de conformité est susceptible d'interdire à
l'utilisateur l'usage du présent équipement.
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:02:19 13:33:29-05:00
Create Date                     : 2002:02:19 13:32:58-05:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 13
Mod Date                        : 2002:02:19 13:33:29-05:00
Creation Date                   : 2002:02:19 13:32:58-05:00
Metadata Date                   : 2002:02:19 13:33:29-05:00

EXIF Metadata provided by EXIF.tools