Philips Electronics M127 17 Inches LCD Color Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	375820
Application ID	5XHAAjtjID/0IzUL4EIQjA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.37kB (292155 bits)
Date Submitted	2003-11-24 00:00:00
Date Available	2003-11-24 00:00:00
Creation Date	2003-11-24 15:55:01
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2003-11-24 15:55:16
Document Title	User Manual

Exhibit 3
Installstion and Operating Instructions
Before operating the monitor please read this manual thoroughly. This
manual should be retained for future reference.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE
1.
2.
3.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the
cabinet. Refer servicing to qualified personnel only.
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a
problem.
NOTES
• Due to the nature of the fluorescent light, the screen may flicker during
•
•
•
•
initial use. Turn off the Power and then turn it on again to make sure the
flicker disappears.
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the
time.
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the
image or turning off the Power for hours.
The life of the fluorescent light used in the LCD monitor is approximately
20,000 hours. Contact your dealer or service center for replacement when
the screen is dark, flickering or not lighting up. Never attempt to replace it
by yourself.
BEFORE YOU OPERATE THE MONITOR
FEATURES
•
•
•
•
•
•
43.2cm(17”) TFT Color LCD Monitor
Crisp, Clear Display for Windows
Supports Resolutions up to 1280 X 1024@75Hz
Screen Saver
Ergonomic Design (TCO’95 Approved)
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:
1.
2.
3.
4.
LCD Monitor
Owner's Manual
DC-12V Power Cord
Base
INSTALLATION INSTRUCTIONS
Install
Remove
Power Cord
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC
required. )
or
220/240V AC voltage area ( No user adjustment is
Power Source:
This LCD monitor has been applied DC+12V. It connects with PC and monitor.
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the LCD monitor comes with a fly-in video
cable. Plug the signal cable′s 15-pin connector into the computer's video port
and tighten the two screws on the cable connector.
DC-12V Power Cable
Signal Cable
Figure 1
Connecting Cables
ADJUSTING THE VIEWING ANGLE
• For optimal viewing it is recommended to look at the full face of the
•
•
monitor, then adjust the monitor’s angle to your own preference.
Hold the stand so you do not topple the monitor when you change the
monitor’s angle.
You are able to adjust the monitor’s angle from -5° to 25°.
Figure 2
NOTES
• Do not touch the LCD screen when you change the angle. It may cause
•
damage or break the LCD screen.
Careful attention is required not to catch your fingers or hands when you
change the angle.
APPENDIX
SPECIFICATIONS
LCD Panel
Input
Display Colors
Dot Clock
Max. Resolution
Plug & Play
Input Connector
Input Video Signal
Maximum Screen Size
Power Source
Environmental
Considerations
Weight (N. W.)
Driving system
Size
Pixel pitch
Viewable angle
Response time
Video
Separate Sync.
H-Frequency
V-Frequency
TFT Color LCD
43.2 cm(17")
0.264 mm( H )x 0.264mm( V )
140° (H) 140° (V)
16 ms
R,G,B Analog Interface
H/V TTL
30kHz - 80kHz
50Hz-75Hz
16.7M Colors
135MHz
1280 x 1024
TM
VESA DDC2B
D-Sub 15pin
Analog:0.7Vp-p(standard),
75 OHM, Positive
Horizontal : 337.9mm
Vertical : 270.3mm
DC+12V , 4A
Operating Temp:
32°F to 97.6°F (0°C to 40°C)
Storage Temp.
-46.7°F to 140°F (-20°C to 60°C)
Operating Humidity :
10% to 85%
3.8Kg
Switch
External Controls:
Functions
Power Consumption
Regulatory
Compliance
( Max )
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Auto Adjust Key
/ Brightness
/ Contrast
Power /Power indicator
MENU
Language
Adjust Position
Bright & Contrast
Video Noise
Adjust Color
OSD Settings
OSD Timer
Exit Main Controls
Reset to factory settings
≤ 42W
FCC,TCO’95, CCC
FACTORY PRESET TIMING TABLE
HORIZONTAL
FREQUENCY
STANDARD RESOLUTION
VERTICAL
FREQUENCY
VGA
640 x 350
31.469kHz
70.087Hz
TV signal
640 × 480
31.25kHz
50.0Hz
VGA
640 × 480
31.469kHz
59.94Hz
VESA
640 × 480
37.861kHz
72.809Hz
VESA
640 × 480
37.5kHz
75.0Hz
VGA
720 × 400
31.469kHz
70.087Hz
SVGA
800 × 600
35.156kHz
56.25Hz
VESA
800 × 600
37.879kHz
60.317Hz
VESA
800 × 600
48.077kHz
72.188Hz
VESA
800 × 600
46.875kHz
75.0Hz
XGA
1024 × 768
48.363kHz
60.004Hz
VESA
1024 × 768
56.476kHz
70.069Hz
VESA
1024 × 768
60.023kHz
75.029Hz
XGA
1280 ×1024
63.981kHz
60.020Hz
VESA
1280 ×1024
79.976kHz
75.025Hz
CONNECTOR PIN ASSIGNMENT
10
11
15
15 - Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
DESCRIPTION
Red
Green
Blue
Ground
Ground
R-Ground
G-Ground
B-Ground
PI N NO.
9.
10.
11.
12.
13.
14.
15.
DESCRIPTION
Empty
Ground
Ground
SDA
H-Sync
V-Sync
SCL

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:11:24 15:55:16-08:00
Create Date                     : 2003:11:24 15:55:01-08:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 9
Mod Date                        : 2003:11:24 15:55:16-08:00
Creation Date                   : 2003:11:24 15:55:01-08:00
Metadata Date                   : 2003:11:24 15:55:16-08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools