Philips Electronics M147 LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	604176
Application ID	o7eCOkDooGqWWKUHvsT1Xw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.91kB (186318 bits)
Date Submitted	2005-11-18 00:00:00
Date Available	2005-11-18 00:00:00
Creation Date	2005-11-18 10:17:42
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2005-11-18 10:18:05
Document Title	Users Manual

e-Manual
Page 1 of 1
Product Information
Page 1 of 9
Product Information
Product Features
230WP7NS
Designed for maximum productivity
{ Big, widescreen ideal for viewing two A4 pages side-by-side
{ 90 degree screen rotation and smart cable management
{ Designed for 'just-right' height and angle adjustment
Best total cost of ownership solution
{ SmartManage compatibility enables LAN-based asset management
{ Power consumption below the industry average
Outstanding front of screen performance
{ WUXGA, wide format 1920x1200 resolution for sharper display
{ Widest viewing angle up to 176 degrees
{ Dual input accepts both analog VGA and digital DVI signals
Great convenience
{ Built-in High-speed USB 2.0 solution for easy connections
{ Easy to adjust display settings with Philips SmartControl
{ Embedded power supply eliminates external power adaptors
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type
TFT LCD
• Screen size
23.0" / 58.4cm
• Pixel Pitch
0.258 x 0.258mm
• LCD Panel type
1920 x 1200pixels
R.G.B. vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area
495.36 x 309.6mm
• Display Colors
8 bits interface (16M colors)
SCANNING
Vertical refresh rate
56Hz-85Hz (Analog / Digital input)
Horizontal Frequency
30kHz-94kHz (Analog input)
VIDEO
• Video dot rate
202.5 MHz
• Input impedance
- Video
75 ohm
- Sync
2K2 ohm
Product Information
Page 2 of 9
• Input signal levels
0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities
Positive and negative
Optical characteristics
• Contrast ratio:
800:1 (typ).
• Brightness:
300 cd/m2 (typ.)
• Peak contrast angle
6 o'clock
• White Chromaticity:
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
(C/R>10)
Upper >89° (typ.)
Lower >89° (typ.)
Left >89° (typ.)
Right >89° (typ.)
• Response time
12 ms (typ.)
• Viewing Angle:
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
• Maximum
1600 x 1200 at 75Hz(analog input)
1600 x 1200 at 60Hz(digital input)
• Recommended 1920 x 1200 at 60Hz * at DVI digital input
37 user definable modes
15 factory preset modes:
H. freq (kHz)
Resolution
V. freq (Hz)
31.5
640*350
70 (IBM VGA 10h)
31.5
720*400
70
31.5
640*480
60
37.5
640*480
75
35.2
800*600
56
37.9
800*600
60
46.9
800*600
75
48.4
1024*768
60
60.0
1024*768
75
60
1280*960
60
69.0
1152*870
75
Product Information
Page 3 of 9
63.9
1280*1024
60
80.0
1280*1024
75
75.0
1600*1200
60
93.8
1600*1200
75 (Analog only)
74.5
1920*1200
60 (Analog only)
74
1920*1200
60
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. If an input from a keyboard, mouse
or other input device is detected, the monitor will be waken up automatically by your PC. The
following table shows the power consumption and signaling of this automatic power saving
feature:
Power Management Definition
VESA Mode
Video
H-sync
V-sync
Power
Used
LED
color
Active
ON
Yes
Yes
< 90W
Green
Sleep
OFF
No
No
< 2W
Amber
Switch Off
OFF
< 2W
OFF
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimension (WxHxD)
548 x 422.6 x 234.6 mm (incl. Pedestal) (in lowest
position)
• Weight
11.8 Kg
• Tilt / Swivel
-5° ~ 25° / ± 45°
• Height adjustment rang
130 mm
• Power supply
100— 240 VAC, 60 - 50 Hz
• Power consumption
80 W* (typ.)
• Temperature
5° C to 35° C (operating)
-20° C to 60° C (storage)
• Relative humidity
20% to 80%
• System MTBF
50K hrs (excluding CCFL 40K hrs)
Product Information
Page 4 of 9
• Cabinet color
Black/Silver
• Altitude
- storage/shipment
- operating
0 - 40,000 feet (12,192m)
0 - 12,000 feet (3657.6m)
* This data is subject to change without notice.
* Resolution 1920 x 1200, standard size, contrast max., brightness 50%, 6500° K, full white
pattern.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The DVI connector contains 24 signal contacts organized in three rows of eight contacts. Signal
pin assignments are listed in the following table:
Pin Signal
No. Assignment
Pin Signal
No. Assignment
Pin Signal
No. Assignment
Pin Signal
No. Assignment
T.M.D.S. Data2-
T.M.D.S. Data1-
17
T.M.D.S. Data0-
C1
* Analog R
T.M.D.S. Data2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data0+
C2
* Analog G
T.M.D.S. Data2
Shield
11
T.M.D.S. Data1
Shield
19
T.M.D.S. Data0
Shield
C3
* Analog B
NC
12
NC
20
NC
C4
* Analog H-syn
NC
13
NC
21
NC
C5
* Analog GND
(Analog R, G,
return)
DDC Clock
14
+5V
22
T.M.D.S. Clock
Shield
DDC Data
15
Ground (return
for +5V and H/Vsync)
23
T.M.D.S. Clock+
* Analog V-sync
16
Hot Plug Detect
24
T.M.D.S. Clock-
2. The 15-pin D-sub connector (male) of the signal cable:
Product Information
Page 5 of 9
Pin
Assignment
No.
Pin
Assignment
No.
Red video input
+5V
Green video input/SOG
10
Ground
Blue video input
11
Ground
Ground
12
Serial data line (SDA)
Cable detect
13
H. Sync / H+V
Red video ground
14
V. Sync (VCLK for DDC)
Green video ground
15
Data clock line (SCL)
Blue video ground
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
Product Information
1) Tilt
2) Swivel
3) Height
adjustment
Page 6 of 9
Product Information
4) Portrait display
Page 7 of 9
Product Information
Page 8 of 9
Product Information
Page 9 of 9
RETURN TO TOP OF THE PAGE
Installing Your LCD Monitor
Page 1 of 2
Installing Your LCD Monitor
Front View Product Description
To switch monitor's power On and Off
To access OSD menu
To adjust the OSD
To adjust brightness of the display
To adjust the OSD
AUTO
Automatically adjust the horizontal position, vertical position,
phase and clock setting
RETURN TO TOP OF THE PAGE
Rear View
Installing Your LCD Monitor
Page 2 of 2
1 AC power input
2 DVI-I input
3 D-Sub
4 Kensington anti-thief lock
5 USB upstream and downstream
RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at 1920 x 1200 @60Hz
Note: You can check the current display settings by pressing the 'OK'
button once. Go into the Product Information. The current display mode is
shown on the item called RESOLUTION.
You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the
best performance out of your monitor. This is included on this CD. Step-by-step
instructions are provided to guide you through the installtion process. Click on the link to
know more about this program.
More about
FP_setup05.exe
RETURN TO TOP OF THE PAGE
Regulatory Information
Page 1 of 2
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a
computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain
or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
RETURN TO TOP OF THE PAGE
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimites des appareils
numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces
limites sont conçues de façon à fourir une protection raisonnable contre les
interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil
produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas
installé et utilisé selon les consignes données, peuvent causer des interférences
nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence
d'interférences dans le cadre d'une installation particulière. Si cet appareil est la
cause d'interférences nuisibles pour la réception des signaux de radio ou de
télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant
en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les
mesures suivantes:
Réorienter ou déplacer l'antenne de réception.
Augmenter la distance entre l'équipement et le récepteur.
Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.
Regulatory Information
Page 2 of 2
Toutes modifications n'ayant pas reçu l'approbation des services compétents en
matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent
équipement.
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
RETURN TO TOP OF THE PAGE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:11:18 10:18:05-08:00
Create Date                     : 2005:11:18 10:17:42-08:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 14
Mod Date                        : 2005:11:18 10:18:05-08:00
Creation Date                   : 2005:11:18 10:17:42-08:00
Metadata Date                   : 2005:11:18 10:18:05-08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools