Philips Electronics M149 20” LCD Monitor User Manual
Philips Electronics Industries (Taiwan) Ltd 20 LCD Monitor Users Manual
Users Manual
e-Manual Philips LCD Monitor Electronic User’s Manual file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/index.htm2006-03-06 4:02:55 PM Product Information • Product Features • Technical Specifications Product Information • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 200WP7 (HWP7200P) ● • Physical Function • Rotating the Monitor • SmartManage ● ● Outstanding front of screen performance ❍ WSXGA, wide format 1680x1050 resolution for sharper display ❍ Fast response time for better display of moving images ❍ Viewing angle up to 178 degrees ❍ Dual input accepts both analog VGA and digital DVI signals Maximum comfort for maximum productivity ❍ SmartManage compatibility enables LAN-based asset management ❍ 90 degree screen rotation and smart cable management ❍ Screen tilt and swivel adjustment for an ideal viewing angle ❍ Display more images and content without scrolling Great convenience ❍ Easy to adjust display settings with Philips SmartControl ❍ High-speed USB 2.0 hub for easy connections ❍ Easy plug-and-play DVI for a true digital experience ❍ Embedded power supply eliminates external power adaptors RETURN TO TOP OF THE PAGE Lead-free Product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment. Technical Specifications* LCD PANEL • Type TFT LCD • Screen size 20.1" / 51cm • Pixel Pitch 0.258 x 0.258mm file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (1 of 11)2006-03-06 4:03:06 PM Product Information • LCD Panel type 1680 x 1050pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated • Effective viewing area 433.44 x 270.9mm • Display Colors 8 bits interface (16.7M colors) SCANNING Vertical refresh rate 56Hz-76Hz (Analog / Digital input) Horizontal Frequency 30kHz-98kHz (Analog input) VIDEO • Video dot rate 210 MHz • Input impedance - Video 75 ohm - Sync 2.2K ohm • Input signal levels 0.7 Vpp • Sync input signal Separate sync Composite sync Sync on green • Sync polarities Positive and negative Optical characteristics • Peak contrast angle 6 o'clock • White Chromaticity: x: 0.283 y: 0.297 (at 9300°K) x: 0.313 y: 0.329 (at 6500°K) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1680 x 1050 at 75Hz(analog input) 1680 x 1050 at 60Hz(digital input) • Recommended 1680 x 1050 at 60Hz(digital input) file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (2 of 11)2006-03-06 4:03:06 PM Product Information 40 user definable modes 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.469 640x350 70.086 31.469 720x400 70.087 31.469 640x480 59.940 35.000 640x480 67.000 37.500 640x480 75.000 35.156 800x600 56.250 37.879 800x600 60.317 46.875 800x600 75.000 48.363 1024x768 60.004 60.023 1024x768 75.029 68.700 1152x870 75.000 63.981 1280x1024 60.020 79.976 1280x1024 75.025 75.0 1600x1200 60 65.29 1680x1050 60.0 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will be waken up automatically by your PC. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color Active ON Yes Yes < 48W Green file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (3 of 11)2006-03-06 4:03:06 PM Product Information Sleep OFF No No < 2W Amber Switch Off OFF < 1W OFF This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 483 x 402 x 235 mm (incl. Pedestal) (in lowest position) • Weight 8.6 Kg • Tilt / Swivel -5° ~ 25° / ± 65° • Height adjustment range 130 mm • Power supply 100— 240 VAC, 60 - 50 Hz • Power consumption 48 W* (typ.) • Temperature 5° C to 35° C (operating) -20° C to 60° C (storage) • Relative humidity 20% to 80% • System MTBF 50K hrs (excluding CCFL 40K hrs) • Cabinet color Black/Silver • Altitude - storage/shipment - operating 0 - 40,000 feet (12,192m) 0 - 12,000 feet (3657.6m) * This data is subject to change without notice. * Resolution 1680 x 1050, standard size, contrast max., brightness 50%, 6500° K, full white pattern. RETURN TO TOP OF THE PAGE Pin Assignment 1. The DVI connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table: file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (4 of 11)2006-03-06 4:03:06 PM Product Information Pin Signal Assignment No. Pin Signal Assignment No. Pin No. Signal Assignment T.M.D.S. Data2- T.M.D.S. Data1- 17 T.M.D.S. Data0- T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield 19 T.M.D.S. Data0/5 Shield No connect 12 No connect 20 No connect No connect 13 No connect 21 No connect DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ No connect 16 Hot Plug Detect 24 T.M.D.S. Clock- 2. The 15-pin D-sub connector (male) of the signal cable: Pin No. Assignment Pin No. Assignment Red video input +5V Green video input/SOG 10 Logic ground Blue video input 11 Ground Ground 12 Serial data line (SDA) No connect 13 H. Sync / H+V Red video ground 14 V. Sync (VCLK for DDC) Green video ground 15 Data clock line (SCL) Blue video ground file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (5 of 11)2006-03-06 4:03:06 PM Product Information RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function 1) Tilt file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (6 of 11)2006-03-06 4:03:06 PM Product Information 2) Swivel 3) Height adjustment file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (7 of 11)2006-03-06 4:03:06 PM Product Information 4) Portrait display file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (8 of 11)2006-03-06 4:03:06 PM Product Information file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (9 of 11)2006-03-06 4:03:06 PM Product Information file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (10 of 11)2006-03-06 4:03:06 PM Product Information RETURN TO TOP OF THE PAGE file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/PRODUCT.HTM (11 of 11)2006-03-06 4:03:06 PM Installing Your LCD Monitor Installing Your LCD Monitor • Front View Produt Description • Setting Up and Connecting Your Monitor • The Base Front View Product Description • Getting Started • Optimizing Performance To switch monitor's power On and Off To access OSD menu To adjust the OSD To adjust brightness of the display To adjust the OSD file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/INSTALL.HTM (1 of 3)2006-03-06 4:03:07 PM Installing Your LCD Monitor AUTO Automatically adjust the horizontal position, vertical position, phase and clock setting RETURN TO TOP OF THE PAGE Rear View 1 AC power input 2 DVI-I input 3 D-sub 4 Kensington anti-thief lock 5 USB upstream and downstream RETURN TO TOP OF THE PAGE file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/INSTALL.HTM (2 of 3)2006-03-06 4:03:07 PM Installing Your LCD Monitor Optimizing Performance ● For best performance, ensure that your display settings are set at 1680 x 1050 @60Hz Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. ● You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This is included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this program. More about FP_setup4.3.exe RETURN TO TOP OF THE PAGE file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/INSTALL.HTM (3 of 3)2006-03-06 4:03:07 PM Regulatory Information TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Energy Star Declaration This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS. Time settings are adjusted from the system unit by software. Normal operation Power Saving Alternative One step VESA State LED Indicator Power Consumption ON (Active) Green <48 W OFF (Sleep) Amber <2W Switch Off Off <1W As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. We recommend you switch off the monitor when it is not in use for a long time. RETURN TO TOP OF THE PAGE Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/regs/regulat.htm (4 of 11)2006-03-06 4:03:26 PM Regulatory Information is encouraged to try to correct the interference by one or more of the following measures: ● ● ● ● Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: ● ● ● ● Réorienter ou déplacer l'antenne de réception. Augmenter la distance entre l'équipement et le récepteur. Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur. Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/regs/regulat.htm (5 of 11)2006-03-06 4:03:26 PM Regulatory Information N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. RETURN TO TOP OF THE PAGE EN 55022 Compliance (Czech Republic Only) RETURN TO TOP OF THE PAGE MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/regs/regulat.htm (6 of 11)2006-03-06 4:03:26 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2006:03:17 09:21:51-08:00 Create Date : 2006:03:17 09:21:35-08:00 Producer : Acrobat Distiller 4.0 for Windows Page Count : 18 Mod Date : 2006:03:17 09:21:51-08:00 Creation Date : 2006:03:17 09:21:35-08:00 Metadata Date : 2006:03:17 09:21:51-08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools