Philips User Manual Htd5520 55 Dfu Eng

User manual htd5520_55_dfu_aen

User Manual: Philips User manual

Open the PDF directly: View PDF PDF.
Page Count: 40

DownloadPhilips  User Manual Htd5520 55 Dfu Eng
Open PDF In BrowserView PDF
Always there to help you
Register your product and get support at
www.philips.com/welcome

Question?
Contact
Philips

User manual

HTD5520
HTD5550
HTD5580

Contents
1 Important

Safety
Care for your product
Care of the environment

2 Your home theater
Main unit
Remote control
Connectors

2
2
3
3
4
4
4
5

3 Connect and set up

6
Connect speakers
6
Connect to TV
7
Connect audio from TV and other devices 8
Set up speakers
9
Set up EasyLink (HDMI-CEC control)
9

4 Use your home theater

11
11
12
12
13
13
14
15
15
16

5 Change settings

17
17
17
18
18
18
18
19

6 Update software

19
19
19

Discs
Data files
Play audio through Bluetooth
USB storage devices
Audio, video, and picture options
Radio
MP3 player
Karaoke
Choose sound

Language settings
Picture and video settings
Audio settings
Parental control settings
Display settings
Energy saving settings
Restore default settings

Check software version
Update software through USB

7 Product specifications

20

8 Troubleshooting

22

9 Notice

Copyright
Trademarks

24
24
24

10 Language code

26

11 Index

27

EN

1

1 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.

Safety
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
• Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.

2

EN

Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside
the disc compartment.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances, they
should be disposed of properly.

Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.

This is CLASS II apparatus with double
insulation, and no protective earth provided.

Care of the environment

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.

Care for your product
•
•
•
•

Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only microfiber cloth to clean the
product.

EN

3

2 Your home
theater
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your home
theater at www.philips.com/welcome.

Main unit

Front panel display

Indication

Pause
Mute

Remote control
This section includes an overview of the
remote control.

a
q
b

p
o

a Disc compartment
b Display panel

c

c

(Open/Close)
Open or close the disc compartment, or
eject the disc.

d

d

(Play/Pause)
Start, pause or resume play.

e

e SOURCE
Select an audio or video source for the
home theater.
f

(Standby-On)
Switch the home theater on or to standby.

Front panel display

Indication

Home
Radio
Disc
Aux In
Optical In
Audio In
Open
Close
Load
4

EN

n

f
g

m

h
l
i

j

k

a

(Standby-On)
Switch the home theater on or to
standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
•

k SURR
Select surround sound or stereo sound.
l

(Play/Pause)
Start, pause or resume play.

m

(Stop)
Stop play.

b Source buttons
• DISC: Switch to disc source.Access
or exit the disc menu when you play
a disc.
• AUDIO SOURCE: Select an audio
input source, or radio.
•
: Switch to Bluetooth
• USB: Switch to USB storage device.

n

o

(Open/Close)
Open or close the disc compartment.

c Navigation buttons
• Navigate menus.
• In video mode, press left or right to
fast backward or fast forward; press
up or down to slow forward or slow
backward (for DVD video only).
• In radio mode, press left or right to
search a radio station; press up or
down to fine tune a radio frequency.

p

(Home)
Access or exit the home menu.

d OK
Confirm an entry.

Connectors

OPTIONS
Access more play options while playing
a disc or a USB storage device.
• In radio mode, auto install the radio
stations.
•

q AUDIO SYNC
• Select an audio language or channel.
• Press and hold to access audio delay
setting, then press Navigation buttons
to delay the audio to match the video.

e

BACK
Return to a previous menu screen.

This section includes an overview of the
connectors available on your home theater.

f

+/Increase or decrease volume.

Front

g

(Mute)
Mute or restore volume.

h

Front connectors

/ (Previous/Next)
Skip to the previous or next track,
chapter or file.
• In radio mode, select a preset radio
station.
•

i Numeric buttons
Select an item to play.
j SOUND
Select a sound mode.

a

(USB)
Audio, video or picture input from a USB
storage device.
EN

5

b MIC
Audio input from a microphone.
c AUDIO IN
Audio input from an MP3 player (3.5mm
jack).

Back connectors

3 Connect and set
up
This section helps you connect your home theater
to a TV and other devices, and then set it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
Note
•• For identification and supply ratings, see the type plate

a AC MAINS
Connect the supplied AC power cable.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c VIDEO OUT
Connect to the composite video input on
the TV.
d AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
e DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.

at the back or bottom of the product.

•• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting up
a surround sound effect. For best effect, position
all the speakers towards the seating position and
place them close to your ear level (seated).

f HDMI OUT (ARC)
Connect to the HDMI input on the TV.
g FM ANTENNA
Connect the supplied antenna for radio
reception.

SUB
WOOFER

FRONT
LEFT

REAR
LEFT

6

EN

FRONT
CENTER

FRONT
RIGHT

REAR
RIGHT

* The actual speaker shapes may vary from the
illustration above.

Note
•• Surround sound depends on factors such as room

shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.

Follow these general guidelines for speakers
placement.

1
2
3

4

5

Option 1: Connect to TV through
HDMI (ARC)
Best quality video
Your home theater supports HDMI version
with Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear the TV
audio through your home theater by using a
single HDMI cable.

Seating position:
This is the center of your listening area.
FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
your TV.
FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and at equal distance from the center
speaker. Make sure that the left, right, and
the center speakers are at equal distance
from your seating position.
REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.

TV

1

2

SUBWOOFER (subwoofer):
Place the subwoofer at least one meter
to the left or right of the TV. Leave about
10-centimeter clearance from the wall.

Connect to TV
Connect your home theater to a TV to watch
videos. You can listen to the TV audio through
your home theater speakers.
Use the best quality connection available on
your home theater and TV.

3

Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your home theater to the HDMI ARC
connector on the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• HDMI-CEC is a feature that enables
CEC compliant devices that are
connected through HDMI to be
controlled by a single remote control,
such as volume control for both the
TV and the home theater. (see 'Set
up EasyLink (HDMI-CEC control)' on
page 9)
If you cannot hear the TV audio through
your home theater, set up the audio
manually. (see 'Set up the audio' on page
10)

EN

7

Option 2: Connect to TV through
standard HDMI

Option 3: Connect to the TV through
composite video

Best quality video
If your TV is not HDMI ARC compliant, connect
your home theater to the TV through a
standard HDMI connection.

Basic quality video
If your TV does not have HDMI connectors, use
a composite video connection. A composite
connection does not support high-definition
video.

TV

1
2
3

4

Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI connector on
the TV.
Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 8).
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• HDMI-CEC is a feature that enables
CEC compliant devices that are
connected through HDMI to be
controlled by a single remote control,
such as volume control for both the
TV and the home theater. (see 'Set
up EasyLink (HDMI-CEC control)' on
page 9)
If you cannot hear the TV audio through
your home theater, set up the audio
manually. (see 'Set up the audio' on page
10)
Note

•• If your TV has a DVI connector, you can use an HDMI/
DVI adapter to connect to TV. However, some of the
features may not be available.

8

EN

TV

1

2
3
4

Using a composite video cable, connect
the VIDEO OUT connector on your
home theater to the VIDEO IN connector
on the TV.
• The composite video connector might
be labeled AV IN, COMPOSITE, or
BASEBAND.
Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 8).
When you watch TV programs, press
SOURCE on your home theater
repeatedly to select the correct audio
input.
When you watch videos, switch your TV to
the correct video input. For details, see the
TV user manual.

Connect audio from TV and
other devices
Play audio from TV or other devices through
your home theater speakers.
Use the best quality connection available on
your TV, home theater, and other devices.

Note
•• When your home theater and TV are connected

through HDMI ARC, an audio connection is not
required (see 'Option 1: Connect to TV through HDMI
(ARC)' on page 7).

Option 1: Connect audio through a
digital optical cable
Best quality audio

TV

1

Using an optical cable, connect the
OPTICAL connector on your home
theater to the OPTICAL OUT connector
on the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through
analog audio cables
Basic quality audio
AUDIO IN- AUX

VCR

Set up speakers
Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.

1
2
3
4

Press

(Home).

Select [Setup], and then press OK.
Select [Audio] > [Speaker Setup].
Press the Navigation buttons and OK to
select and change:
• [Speakers Volume]: Set the volume
level of each speaker.
• [Speakers Delay]: Set the delay time
for speakers which are placed closer to
the seating position in order to obtain
equal audio transmission from all the
speakers.

Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLinkcompliant devices that are connected through
HDMI can be controlled by a single remote
control.
Note
•• Depending on the manufacturer, HDMI-CEC is known

1

Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on the TV or
other device.

by many names. For information on your device, see
the user manual of the device.
•• Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.

Before you start
• Connect your home theater to the HDMICEC compliant device through HDMI
connection.
EN

9

•

Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.

Note
•• To change the EasyLink control settings, press

(Home), select [Setup] > [Video] > [HDMI Setup] >
[EasyLink Setup] > [EasyLink].

Enable EasyLink

1
2
3
4
5

Press

(Home).

Select [Setup], and then press OK.
Select [Video], and then press OK.
Select [HDMI Setup] > [EasyLink Setup]
> [EasyLink] > [On].
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.

EasyLink controls
With EasyLink, you can control your home
theater, TV, and other connected HDMI-CEC
compliant devices with a single remote control.
• [1 Touch Play] (One-touch play): If onetouch play is enabled, press (StandbyOn) on the remote control of your home
theater to wake up the TV from standby.
• [1 Touch Standby] (One-touch standby): If
one-touch standby is enabled, your home
theater can switch to standby with the
remote control of the TV or other HDMICEC devices.
• [Sys Audio Control] (System audio
control): If system audio control is enabled,
the audio of the connected device is
output through your home theater
speakers automatically when you play the
device.
• [Audio Mapping] (Audio input mapping):If
system audio control does not work, map
the connected device to the correct audio
input connector on your home theater
(see 'Set up the audio' on page 10).

10

EN

Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
• Check that you have enabled EasyLink
on all the devices, (see 'Set up EasyLink
(HDMI-CEC control)' on page 9) and
• on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.

1
2
3
4

5
6

Press

(Home).

Select [Setup], and then press OK.
Select [Video], and then press OK.
Select [HDMI Setup] > [EasyLink Setup]
> [Sys Audio Control] > [On].
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
Select [HDMI Setup] > [EasyLink Setup]
> [Audio Mapping].
Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.

4 Use your home
theater

Button

Action

(Play/
Pause)

Start, pause or resume play.

/
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in the Quick start guide and the user
manual.
• Switch the TV to the correct source for
the home theater.

1
2

3

Press (Home).
»» The home menu is displayed.
Press the Navigation buttons and OK to
select the following:
• [DISC]: Start disc play.
• [USB]: Access the USB content
browser.
• [Setup]: Access menus to change video,
audio and other settings.
Press

(Home) to exit.

Your home theater can play DVDs, VCDs, and
CDs. It can also play discs that you’ve made at
home, such as CD-R discs of photos and music.

3

Navigation
buttons
(left/right)
Navigation
buttons
(up/down)
DISC
AUDIO
SYNC
OPTIONS

Flip the picture vertically or
horizontally.
Access or exit the disc menu.
Select an audio language or
channel.
Access more options when you
play your audio, video, or media
files. (see 'Audio, video, and
picture options' on page 13)

Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.

Discs

1
2

/

Stop play.
Skip to the previous or next
track, chapter or file.
Fast backwards or fast forwards.
Press repeatedly to change the
search speed.
Rotate the picture clockwise or
counter-clockwise.

Insert a disc into the home theater.
If the disc does not play automatically, press
DISC or select [DISC] from the home
menu.
Press the play buttons to control play (see
'Play buttons' on page 11).

Play buttons
Button

Action

Navigation
buttons
OK

Navigate menus.

1
2

While playing video, press and hold
AUDIO SYNC.
»» Audio sync menu is displayed.
Press the Navigation buttons to
synchronize the audio with the video, and
then press OK.
Note

•• Picture and sound can be synchronized through the
setup menu, press
> [Audio Sync].

(Home), select [Setup] > [Audio]

Confirm an entry.
EN

11

Display menu for VCD and SVCD
Display the content menu on VCD and SVCD
discs.

1
2
3

Press

(Home).

Select [Setup], and then press OK.
Select [Preference] > [PBC].
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.

Data files
Your home theater can play pictures, audio and
video files contained in a disc or a USB storage
device. Before you play a file, check that the file
format is supported by your home theater.

1
2

Play the files from a disc or USB storage
device.
To stop play, press .
• To resume the video from where you
stopped, press
.
• To play the video from the start, press
OK.
Note

•• To play DivX DRM protected files, connect your home
theater to a TV through an HDMI cable.

Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
Note
•• Make sure that the subtitle file has the exact same

name as the video file. For example, if the video file is
named 'movie.avi', name the subtitle file as 'movie.srt'
or 'movie.sub'.
•• Your home theater supports the following file formats:
.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do
not appear correctly, change the character set.

12

EN

1
2
3
4
5
6

Press
OPTIONS, and select a subtitle
language under SUBTITLE option.
For DivX videos, if the subtitles do not
appear correctly, continue the following
steps to change the character set.
Press

(Home).

Select [Setup], and then press OK.
Select [Preference] > [DivX Subtitle].
Select a character set that supports the
subtitle.

Character
Set

Language

[Standard]

English, Albanian, Danish, Dutch,
Finnish, French, Gaelic, German,
Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish and
Turkish

VOD code for DivX
Before you purchase DivX videos and play
them on your home theater, register the home
theater on www.divx.com using the DivX VOD
code.

1
2
3

Press

(Home).

Select [Setup], and then press OK.
Select [General] > [DivX(R) VOD Code].
»» The DivX VOD registration code for
your home theater is displayed.

Play audio through Bluetooth
Through Bluetooth, connect this product with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through this product.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 2.1 + EDR.

•

1
2

3

4

5

The operational range between this
product and a Bluetooth device is
approximately 10 meters (30 feet).
Press to select Bluetooth mode.
»» [bt] is displayed on the display panel.
On the Bluetooth device, switch on
Bluetooth, search for and select the name
of this product to start connection (see
the user manual of the Bluetooth device
on how to enable Bluetooth).
• If prompted for a password, enter
"0000".
Wait until you hear a beep sound from this
product.
»» The beep sound from this product
indicates that the connection succeeds.
[bt_rd] on the display panel is
displayed for 2 seconds, and then the
display comes back to [bt].
»» If the connection fails, a beep sound
does not emit from this product.
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused.
• If music streaming is interrupted, place
the Bluetooth device closer to this
product.
To exit Bluetooth, select other source.
• When you switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note

•• The music streaming may be interrupted by obstacles

between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•• If you want to connect this product with another
Bluetooth device, press and hold
on the remote
control to disconnect the currently connected
Bluetooth device.

USB storage devices
Enjoy pictures, audio, and video stored on a
USB storage device such as an MP4 player.
What you need
• A USB storage device that is formatted
for FAT or NTFS file system, and complies
with the Mass Storage Class.
• A media file in one of the supported file
formats.
Note
•• If you use a USB extension cable, USB HUB or USB
multi-reader, the USB storage device may not be
recognized.

1
2
3
4

Connect a USB storage device to the
(USB) connector on your home theater.
Press USB.
»» A content browser is displayed.
Select a file and then press OK.
Use the play buttons to control play.

Audio, video, and picture
options
Use advanced features when you play audio,
video, or media files from a disc or a USB
storage device.

Audio options

1

While playing audio, press
OPTIONS
repeatedly to select a repeat mode.

Video options

1

While viewing video, press
OPTIONS.
»» The video options menu is displayed.
Depending on the video source, some
options are not available.
EN

13

2

Press the Navigation buttons buttons and
OK to select and change:
• [Info]: Display the play information.
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.
• [Aspect ratio]: Select a display ratio of
picture that matches your TV screen.
• [Repeat]: Select a repeat play mode.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Subtitle]: Select subtitle language for
video.
• [Angle]: Select video scenes recorded
in different camera angels.
• [Microphone]: Turn the microphone
on or off.
• [Karaoke setup]: Access the Karaoke
setup menu.
• [Vocal]: Select a Karaoke audio mode,
or turn off original vocals.

Picture options

1
2

3
4

While viewing pictures, press
OPTIONS.
Press the Navigation buttons and OK to
select and change:
• [Color]: Turn on or off the color mode.
• [Photo preview]: Display the thumbnail
of photos.
• [Repeat]: Select a repeat mode for
slideshow.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.

Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.

1
2
3
4
5

BACK and then go to the picture

Select a picture and then press OK to
start the slideshow.
Press

to stop slideshow.

Press

again to stop music.

Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•• AM and digital radio are not supported.
•• If no stereo signal is detected, you are prompted to
install the radio stations again.

1

2

Press
/ to go to previous or next
preview page.
Press the Navigation buttons and OK to
select a picture.

EN

Press
folder.

Radio

3

14

Select an audio track and then press OK.

Connect the FM antenna to the FM
ANTENNA on your home theater.
• For the best reception, place the
antenna away from your TV or other
sources of radiation.
Press SOURCE repeatedly to select radio
source.
»» If you have already installed the radio
stations, the last channel that you
listened to is played.
»» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press
to install
radio stations.
Use the remote control to listen or to
change radio stations.

Play buttons
Button

Action

/
or
Alphanumeric
buttons
Navigation
buttons

Select a preset radio station.

SOURCE
button to
access radio

Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
Manual:
1) In radio mode, press
OPTIONS.
2) When a radio frequency
blinks, press OK to store
the radio station.
3) Repeat step 1 and 2 to
store other stations.
Automatic:
In radio mode, press and
hold
OPTIONS for three
seconds to reinstall all the
available radio station.

Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.

1
2
3

Press SOURCE repeatedly to select radio
source.

MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.

1

2
3

Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
• If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
Press AUDIO SOURCE repeatedly until
(Audio In) appears on the display
panel.
Press the buttons on the MP3 player to
select and play audio files.

Karaoke
Play a Karaoke disc on your home theater and
sing along with the music.
What you need
• A Karaoke microphone.
• Karaoke discs.
Note
•• To prevent loud feedback or unexpected noise, turn

the microphone volume to the minimum before you
connect the microphone to your home theater.

Press .
Press and hold
to toggle between
50 kHz or 100 kHz.

Play karaoke music

1
2

While playing a karaoke disc, press
(Home).
»» The home menu is displayed.
Select [Karaoke], and then press OK.
»» The karaoke setup menu is displayed.
EN

15

3

Press the Navigation buttons (up/down)
and OK to change the following settings:
• [Microphone]: Turn the microphone
on or off.
• [Mic Volume]: Change the microphone
volume.
• [Echo Level]: Change the echo level.
• [Karaoke Scoring]: Select a difficulty
level to score your singing. After a song
ends, a score is given.
• [Karaoke Idol]: Have a Karaoke
contest with your friends. Follow the
on-screen instructions to start the
contest.
• [Key Shift]: Change the pitch to match
your voice.
• [Vocal]: Select a Karaoke audio mode,
or turn off original vocals.

Choose sound
This section helps you choose the ideal sound
for your video or music.

Sound mode
Select predefined sound modes to suit your
video or music.

1

16

Press SOUND repeatedly to select a
sound mode.
• [Movie Mode]: Enjoy a cinematic audio
experience, specially enhanced for
movies.
• [Music Mode]: Recreate the original
recording environment of your music,
in the studio or at a concert.
• [Original]: Experience the original
sound of your movies and music,
without added sound effects.
• [News]: Hear every word with
optimized speech and clear vocals.
• [Gaming]: Enjoy thrilling arcade sounds,
ideal for action-packed video games or
loud parties.

EN

Surround sound mode
Experience an immersive audio experience with
surround sound modes.

1

Press SURR repeatedly to select a
surround mode.
• [Multi Channel]: Traditional 5.1 channel
for a more relaxing cinematic
experience.
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
Note

•• If the audio source is a 2.1 channel, multi-channel mode
will output 5-channel stereo sound.

5 Change settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
Note
•• You cannot change a setting that is grayed out.
•• To return to the previous menu, press
BACK. To
exit the menu, press

(Home).

Language settings
Onscreen display language

1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [General] and then press OK.
• [OSD Language]: Select a display
language for menu.

Disc language

1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [Preference] and then press OK.
• [Audio]: Select an audio language for
discs.
• [Subtitle]: Select a subtitle language
for discs.
• [Disc Menu]: Select a menu language
for discs.

Note
•• If your preferred disc language is not available, select

[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
'Language code' on page 26).
•• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.

Picture and video settings
1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [Video] and then press OK.
• [TV System]: Select a video format
supported by the TV.
• [TV Display]: Select a picture format
to fit the TV screen.
• [Picture Setting]: Select animation for
the slide show.
• [HD JPEG]: Enable this feature to view
high-definition JPEG pictures through
HDMI connection.
• [HDMI Setup]: Access the following
setup through HDMI connection.
* [Resolution]: Select a resolution for
high definition videos.
* [HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
* [Wide Screen]: Select a display
format for wide screen videos.
* [EasyLink Setup]: Set up EasyLink
control (see 'Set up EasyLink (HDMICEC control)' on page 9).
Note

•• If you change a setting, make sure that the TV supports
the new setting.

EN

17

Audio settings
1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [Audio] and then press OK.
• [HDMI Audio]: Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
• [Audio Sync]: Set audio delay if audio
and video cannot be matched.
• [Speaker Setup]: Set up speakers for
best surround sound experience.
• [Sound Mode]: Select a predefined
sound mode to suit your video and
music.
• [Treble/Bass]: Set the high frequency
(treble) and low frequency (bass)
settings of the home theater.
• [Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases volume of sounds such as
speech. Applicable to Dolby Digital
encoded DVD discs only.

Lock disc

1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [General] and then press OK.
• [Disc Lock]: Lock the disc to restrict
play. You can lock up to 20 discs on
your home theater.
Note

•• To play a locked disc, follow the onscreen instructions
to enter the password, and then press OK.

Display settings
1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [Preference] and then press OK.
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.

Parental control settings

Energy saving settings

Password and Ratings

1
2
3

1
2
3

18

Press

(Home).

Select [Setup] and then press OK.
Select [Preference] and then press OK.
• [Password]: Set or change your
password for parental control access.
If you do not have a password or
have forgotten your password, enter
000000.
• [Parental Control]: Enable maturitybased restricted access for playback
of DVD-video that are recorded with
ratings. To play discs irrespective of the
rating, select [8 Adult].

EN

Press

(Home).

Select [Setup] and then press OK.
Select [General] and then press OK.
• [Display Dim]: Set the brightness of
the home theater front panel display.
• [Sleep Timer]: Switch the home
theater to standby mode after the
elapsed time.
• [Auto Standby]: Switch the home
theater to standby mode after
15 minutes of no activity when in disc
or USB mode.

Restore default settings

6 Update software

1
2
3

Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.

4

Press

(Home).

Select [Setup] and then press OK.
Select [Preference] > [Default], and then
press OK.
Follow the onscreen message to restore
default setting.
»» Your home theater is reset to its
default settings, except for password,
parental control and disc lock settings.

Compare the version of your current
software with the latest version on
www.philips.com/support. If the current version
is lower than the latest version available on the
Philips support website, upgrade your home
theater with the latest software.
Caution
•• Do not install a lower version of software than the

current version installed on your product. Philips is not
liable for problems caused due to software downgrade.

Check software version
Check the version of the current software
installed on your home theater.

1
2
3

Press

(Home).

Select [Setup] and then press OK.
Select [Preference] > [Version Info].
»» The software version is displayed.

Update software through
USB
What you need
• A USB flash drive that is FAT or NTFSformatted, with at least 75MB of memory.
Do not use a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP file
format.

EN

19

Step 1: Download the latest software

1
2
3

4
5
6

Connect a USB flash drive to your
computer.
In your web browser, go to
www.philips.com/support.
At the Philips Support website, find your
product and locate the Software and
drivers.
»» The software update is available as a
zip file.
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the
software update file in the root directory.
Disconnect the USB flash drive from your
computer.

Step 2: Update the software
Caution
•• Do not switch off the home theater or remove the
USB flash drive during the update.

1
2
3

7 Product
specifications

Connect the USB flash drive containing the
downloaded file to your home theater.
• Make sure that the disc compartment
is closed and there is no disc inside.

Note
•• Specifications and design are subject to change without
notice.

Region codes
The type plate on the back or bottom of the
home theater shows which regions it supports.
Country
Europe, United Kingdom
Asia Pacific, Taiwan, Korea
Latin America
Australia, New Zealand
Russia, India
China

Switch your TV to the correct source for
your home theater.
Follow the onscreen instructions to
confirm the update.
»» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.

Media formats
•

DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX media, USB storage
device

Supported file formats
•
•
•
20

DVD

EN

Video: .avi, .divx, .mpg, .mpeg
Audio: .mp3, .wma
Picture: .jpg, .jpeg

Playable video files
•
•

•
•

Resolution size: 720 x 576 pixels
Video codec:
• .avi, .divx: DivX3.11, DivX4.x, DivX5.x,
MPEG 1, MPEG 2, Xvid
• .mpg, .mpeg: MPEG 1, MPEG 2
Audio codec:
• .avi, .divx: PCM, AC-3, MP3, WMA
• .mpg, .mpeg: PCM, MPEG, MP3
Maximum Bit rate: 8Mbps

•
•

Radio
•

Playable audio files
•
•

Playable audio codec:
• .mp3: MP3
• .wma: WMA
Maximum Bit rate:
• .mp3: 320kbps
• .wma: 192kbps

Bluetooth
••
••

Bluetooth profiles: A2DP, AVRCP
Bluetooth version: 2.1 + EDR

Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 32 kbps - 320 kbps
• WMA: 64 kbps - 192 kbps

•
•

Tuning range:
• Europe/Russia/China:
FM 87.5-108 MHz (50 kHz)
• Asia Pacific/Latin America:
FM 87.5-108 MHz (50/100 kHz)
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 200 Hz-12.5 kHz
/ ±6 dB

USB
•
•
•
•

Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32, NTFS
USB port: 5V , 500mA

Amplifier

Main unit

•

•

•
•
•

Total output power: 1000W RMS
(+/- 0.5 dB, 10% THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 2 V
• AUDIO IN: 1 V

•
•
•

Power supply:
• Europe/China/Russia/India:
220-240V~, 50 Hz
• Latin America/Asia Pacific:
110-127 V/220-240 V~, 50-60 Hz
Power consumption: 140 W
Standby power consumption: ≤ 0.5 W
Dimensions (WxHxD):
360 x 58 x 325 mm
Weight: 2.3 kg

Video

•

•
•

Subwoofer

Signal system: PAL / NTSC/Multi
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p

Audio
•

S/PDIF Digital audio input:
• Optical: TOSLINK

•
•
•
•

Output power:
166 W RMS (+/- 0.5 dB, 10% THD)
Impedance: 3 ohm
Speaker drivers: 203 mm (8") woofer
Dimensions (WxHxD):
178 x 300 x 343 mm
EN

21

•
•

Weight: 4.1 kg
Cable length: 3.3 m

Speakers
Center speaker:
• 166W RMS (+/- 0.5 dB, 10% THD)
• Speaker impedance: 3 ohm
• Speaker drivers: 1 x 78 mm (3") full range
• Dimensions (WxHxD):
223 x 100 x 80 mm
• Weight: 0.77 kg
• Cable length: 2.25 m
Front/Rear speaker:
• 4 x 166W RMS (+/- 0.5 dB, 10% THD)
• Speaker impedance: 3 ohm
• Speaker drivers: 1 x 78 mm (3") full range
• Dimensions (WxHxD):
• HTD5520: 90 x 185 x 82 mm
(front/rear)
• HTD5550: 90 x 185 x 82 mm (front);
247 x 1090 x 242 mm (rear)
• HTD5580: 247 x 1090 x 242 mm
(front/rear)
• Weight (front):
• HTD5520: 0.63 kg/each
• HTD5550: 0.63 kg/each
• HTD5580: 3.03 kg/each
• Weight (rear):
• HTD5520: 0.63 kg/each
• HTD5550/HTD5580: 3.03 kg/each
• Cable length (front): 3.25 m
• Cable length (rear): 10.25 m

Remote control batteries
•

1 x AAA-R03-1.5 V

Laser
•
•

•

Type: Semiconductor laser GaAIAs (CD)
Wave length: 650-662 nm (DVD),
785-795 nm (CD)
Output power: 6 mW (DVD),
7 mW (VCD/CD)
Beam divergence: 60 degrees.

22

EN

•

8 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
product.

To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.

Main unit
The buttons on the home theater do not
work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.

Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
• Wait for 10 seconds for auto recovery,
or change the HDMI video setting (see
'Picture and video settings' on page 17).
Disc does not play high-definition video.
• Make sure that the disc contains highdefinition video.
• Make sure that the TV supports highdefinition video.
• Use an HDMI cable to connect to the TV.

Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices.
However, you do not need a separate
audio connection when the home theater
and TV are connected through an HDMI
ARC connection.
• Set up the audio for the connected device
(see 'Set up the audio' on page 10).
• Reset your home theater to its factory
settings (see 'Restore default settings' on
page 19), and then switch it off and switch
on again.
• On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press and hold AUDIO SYNC.
2) Press the Navigation buttons within five
seconds to synchronize the audio with the
video.

Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 20).
• Make sure that the home theater supports
the region code of the disc (see 'Region
codes' on page 20).
• If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
• Make sure that the DivX file is encoded
according to the 'Home Theater Profile'
with the DivX encoder.
• Make sure that the DivX file is complete.

DivX subtitles do not display correctly.
• Make sure that the subtitle file name is
the same as the movie file name (see
'Subtitles' on page 12).
• Select the correct character set (see
'Subtitles' on page 12).
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
home theater.
• Make sure that the file system on the USB
storage device is supported by the home
theater.
'input invalid' or 'x' sign appears on the TV.
• The operation is not possible.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on (see
'Set up EasyLink (HDMI-CEC control)' on
page 9).
• For TVs from different manufacturers, the
HDMI CEC could be called differently.
Check theTV user manual on how to
enable it.
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.

Bluetooth
A device cannot connect with this product.
• The device does not support the
compatible profiles required for this
product.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.

EN

23

•
•

The device is not correctly connected.
Connect the device correctly (see 'Play
audio through Bluetooth' on page 12).
This product is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.

Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to this product, or remove
any obstacle between the device and this
product.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to this product, or remove
any obstacle between the device and this
product.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of this product.

9 Notice
This section contains the legal and trademark
notices.

Copyright

This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.

Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

DivX , DivX Ultra , DivX Certified and
associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
DivX Ultra Certified to play DivX video
with advanced features and premium content.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
24

EN

registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.

The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips
is under license. Other trademarks and trade
names are those of their respective owners.

CLASS 1
LASER PRODUCT

EN

25

10 Language code
Abkhazian
6566
Afar
6565
Afrikaans
6570
Amharic
6577
Arabic
6582
Armenian
7289
Assamese
6583
Avestan
6569
Aymara
6589
Azerhaijani
6590
Bahasa Melayu
7783
Bashkir
6665
Belarusian
6669
Bengali
6678
Bihari
6672
Bislama
6673
Bokmål, Norwegian
7866
Bosanski
6683
Brezhoneg
6682
Bulgarian
6671
Burmese
7789
Castellano, Español
6983
Catalán
6765
Chamorro
6772
Chechen
6769
Chewa; Chichewa; Nyanja 7889
9072
Ё᭛
Chuang; Zhuang
9065
Church Slavic; Slavonic 6785
Chuvash
6786
Corsican
6779
Česky
6783
Dansk
6865
Deutsch
6869
Dzongkha
6890
English
6978
Esperanto
6979
Estonian
6984
Euskara
6985

6976
Faroese
7079
Français
7082
Frysk
7089
Fijian
7074
Gaelic; Scottish Gaelic 7168
Gallegan
7176
Georgian
7565
Gikuyu; Kikuyu
7573
Guarani
7178
Gujarati
7185
Hausa
7265
Herero
7290
Hindi
7273
Hiri Motu
7279
Hrwatski
6779
Ido
7379
Interlingua (International)7365
Interlingue
7365
Inuktitut
7385

26

EN

Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português

7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
7574
7585
7679
7665
7686
7666
7673
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
6785
7982
7977
7983
8073
8065
7065
8076
8084

Pushto
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Shqip
Sindhi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu

8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085

11 Index
A

amplifier
audio
predefined modes
specifications
audio options

L

language
language code
21
16
21
13

C

care
product
connectors
front connectors
control
disc play
main unit

3
5
11
4

D

discs
audio options
control buttons
options
play
synchronize picture and sound
time search
titles
display
VCD/SVCD menu
display panel

F

FM antenna

13
11
13
11
11
13
13
12
4

6

HDMI

karaoke

M

main unit
overview
specifications
troubleshooting
media formats
MP3
connector

4
21
22
20
5

O

options
picture
overview
main unit
remote control

14
4
4

P

picture
options
troubleshooting
picture options
play
discs
radio
troubleshooting
product specifications

14
22
14
11
21
23
20

R

H
K

26

15

radio
FM antenna
specifications
tuning grid
region codes
remote control
batteries
overview
repeat

6
21
15
20
22
4
13
EN

27

S

safety
use of the product
sound
predefined sound mode
surround sound
synchronize picture and sound
troubleshooting
sound mode
speakers
specifications
surround sound
subwoofer
specifications
synchronize picture and sound

T

time search
titles
trademarks
troubleshooting
connection
main unit
picture
play
sound
tuning grid

2
16
16
11
23
16
22
16
21
11

13
13
24
22
22
22
23
23
15

U

USB
format
USB storage device
options
specifications

21
13
21

V

video
synchronize picture and sound
video formats
video options

28

EN

11
21
13

Certificado de Garantía válido para:
Colombia-Costa Rica-Ecuador-El Salvador-GuatemalaHonduras-Nicaragua-Panamá-Perú-República Dominicana-Venezuela

Colombia: 01 800 700 7445
www.philips.com.co

Honduras
www.centralamerica.philips.com

Costa Rica: 0800 507 7445
www.centralamerica.philips.com

Nicaragua
www.centralamerica.philips.com

Ecuador: 1-800-10-1045
www.centralamerica.philips.com

Panamá: 800 8300
www.centralamerica.philips.com

El Salvador: 800 6024
www.centralamerica.philips.com

Perú: 0800-00100
www.philips.com.pe

Guatemala: 1 800 299 0007
www.centralamerica.philips.com

República Dominicana: 1 800 751 2673
www.centralamerica.philips.com
Venezuela: 0800 100 4888
www.philips.com.ve

36

CERTIFICADO DE GARANTÍA EN ARGENTINA
IMPORTANTE

El presente certificado de garantía es válido únicamente en la República Argentina.
Para que el mismo tenga validez, es imprescindible que esté completado por la casa vendedora y ser presentado por el usuario
conjuntamente con la factura original de compra.
Producto:

Modelo:

Nro. De Serie:

Fecha de Venta:

Firma y sello de la casa vendedora:
Fabricante/Importador: Philips Argentina S.A.
y/o Fábrica Austral de Productos Eléctricos S.A.
Dirección: Vedia 3892 – Buenos Aires, Argentina.
PHILIPS ARGENTINA S.A. en adelante denominada “la empresa”, garantiza al comprador de este producto, a partir de la fecha
de adquisición y por el término de:
• 6 (seis) meses para los siguientes productos: Mini Sistemas Hi Fi, Micro Sistemas Hi Fi, Parlantes para iPhone & iPod Hi Fi, Reproductores de CD Portátiles, Stereos para automóvil, Parlantes y Potencias para automóvil, Reproductores de audio digital, Radio relojes,
Radios portátiles, Cámaras fotográficas digitales y Marcos digitales para fotos, Auriculares / audífonos, accesorios para aplicaciones
• 1 (un) año para los siguientes productos: Home Theaters, Reproductores de Blu-ray, Reproductores de DVD, Micro Theaters / Micro
Sistemas con DVD, Mini Sistemas Hi Fi con reproducción de DVD, Reproductores de DVD Portátiles, Teléfonos,MP3 y MP4
el normal funcionamiento contra cualquier defecto de fabricación y/o vicio de material, y se compromete a reparar el mismo
–sin cargo alguno para el adquiriente- cuando el mismo fallare en situaciones normales de uso y bajo las condiciones que
a continuación se detallan:
1. Este certificado de garantía es válido únicamente en la República Argentina.
2. El certificado debe ser completado por la casa vendedora y ser presentado por el usuario conjuntamente con la factura original de
compra.
3. Serán causas de anulación de esta garantía, en los casos que corresponda:
3.1. Uso impropio o distinto del uso doméstico.
3.2. Exceso o caídas de tensión eléctrica que implique uso en condiciones anormales.
3.3. Instalación y/o uso en condiciones distintas a las marcadas en el “Manual de instalación y uso” que se adjunta al producto.
3.4. Cualquier intervención al artefacto por terceros no autorizados por la empresa.
4. La garantía carecerá de validez si se observare lo siguiente:
4.1. Enmiendas o raspaduras en los datos incluidos en la etiqueta del artefacto, certificado de garantía o factura.
4.2. Falta de factura original de compra que detalle tipo de artefacto, modelo, número de serie y fecha que coincida con los del
encabezamiento del presente certificado.
5. No están cubiertos por esta garantía los siguientes casos:
5.1. Los daños ocasionados al exterior del gabinete.
5.2. Las roturas, golpes, caídas o rayaduras causadas por traslados.
5.3. Los daños o fallas ocasionados por deficiencias, sobretensiones, descargas o interrupciones del circuito de conexión del artefacto a fuentes de energía (Red eléctrica, pilas, baterías, etc) que no sean las especificadas en el Manual de uso del mismo.
5.4. Las fallas, daños, roturas o desgastes producidos por el maltrato o uso indebido del artefacto y/o causadas por inundaciones,
incendios, terremotos, tormentas eléctricas, golpes o accidentes de cualquier naturaleza.
5.5. Las fallas o daños ocasionados en desperfectos en la línea telefónica.
5.6. Las fallas producidas por una mala recepción ocasionada en el uso de una antena deficiente o en señales de transmisión débiles.
6. Las condiciones de instalación y uso del artefacto se encuentran detalladas en el Manual de Uso del mismo.
7. La empresa no asume responsabilidad alguna por los daños personales o a la propiedad al usuario o a terceros que pudieran causar
la mala instalación o uso indebido del artefacto, incluyendo en este último caso a la falta de mantenimiento.

29

8. En caso de falla, el usuario deberá requerir la reparación a la empresa a través del Service Oficial y/o Talleres Autorizados más próximos a su domicilio y cuyo listado se acompaña al presente. La empresa asegura al usuario la reparación y/o reposición de piezas
para su correcto funcionamiento en un plazo no mayor a 30 días contados a partir de la fecha de solicitud de reparación, salvo caso
fortuito, fuerza mayor.
9. Toda intervención del servicio técnico realizada a pedido del usuario dentro del plazo de garantía, que no fuera originada por falla o
defecto alguno cubierto por este certificado, deberá ser abonada por el interesado de acuerdo a la tarifa vigente.
10.El presente certificado anula cualquier otra garantía implícita o explícita, por la cual y expresamente no autorizamos a ninguna otra
persona, sociedad o asociación a asumir por nuestra cuenta ninguna responsabilidad con respecto a nuestros productos.
11.En caso de que durante el período de vigencia de esta garantía el artefacto deba ser trasladado a las Delegaciones Oficiales y/o
Talleres Autorizados de Service para su reparación, el transporte será realizado por la empresa y serán a su cargo los gastos de flete
y seguros y cualquier otro que deba realizarse para su ejecución.

Centros de Atención al Cliente
ARGENTINA

Tel.:

0800-888-7532
(Número gratuito)

(011) 4544-2047
Para más Información visite nuestra web: www.philips.com.ar
CAPITAL FEDERAL

ATTENDANCE S.A.

ELECTARG S.R.L.

Av. Monroe 3351 | Tel.: (011) 4545-5574 - 4545-4700

Centro: Av. Córdoba 1357 - Tel.: (011) 4811-0084/9/1050
Caballito: J. M. Moreno 287 - Tel.: (011) 4903-6967/ 6854/8983

DIG TRONIC

Av San Martín 1762 | Tel.: (011) 4583-1501

Saladillo: Saladillo 2527 - Tel.: (011) 5554-9400

GATTUSO DEMETRIO
Juan Bautista Alberdi 3425 | Tel.: (011) 4619-1631

BUENOS AIRES

GRAN BUENOS AIRES
Florencio Varela

Casa Torres S.A.

Lomas de Zamora Attendance S.A.

San Martín 2574
Av. Hipólito Yrigoyen 9228

Lomas de Zamora Electarg S.R.L.

Italia 78

Moreno
Morón
Olivos

Argentronica
Servotronic
Electarg S.R.L.

Teniente Camilli 102
Ntra. Sra. Buen Viaje 1222
D F Sarmiento 3562

Quilmes

Casa Torres S.A.

Pellegrini 140

Ramos Mejía
San Isidro
San Miguel
Tigre
Villa Ballester

Electarg S.R.L.
MC Zona Nort SRL
TecnoSanMiguel
Pantronic
Servotronic

Belgrano 224
Av. Centenario 899
Belgrano 999
Almirante Brown 529
José Hernandez 3064

30

(011) 4255-5854
(011) 4467-7140
(011) 4292-8900
(011) 4239-2115
(011) 4244-0397
(011) 4224-6640
(0237) 463-9500
(011) 4627-5656
(011) 4799-1945
(011) 4794-7117
(011) 4255-5854
(011) 4253-6700
(011) 4654-8003
(011) 4656-0619
(011) 4747-4040
(011) 4664-4131
(011) 4749-4040
(011) 4767-2515
(011) 4768-5249

Azul
Bahía Blanca
Baradero
Berisso

Herlein Raúl Horacio
Neutron
Juan Francisco Mazzarella
Electrónica Bander

Av. 25 de Mayo 1227
Soler 535
Araoz 847
Calle 158 n°107

Junín
Junín
La Plata
Luján
Mar de Ajó
Mar del Plata

José Capurzio
Junin Service
Highvision
Electro Hogar - Scamardella
Tauro Electrónica
Central Service – Tonelli

Primera Junta 436
Alsina 537
Calle 60 n°1033
25 de Mayo 280
Jorge Newbery 1434
Olazabal 2249

Mar del Plata

Service Integral

Salta 3519

Marcos Paz
Necochea
Pehuajó
Pergamino
San Nicolás
San Pedro
Tandil
Tres Arroyos
Zárate

Tecnicentro – Leiva
Electrónica Camejo
Calcagni Carlos Alberto
ACVSistemas
Servitec
Electrónica Menisale
Lazzarini Oscar Rafael
Saini Fabian y Sergio
Electrónica Spinozzi

Monteagudo 208
Calle 63 1745
Zubiria 794
Dr. Alem 758
Av. Alvarez 148
Mitre 1695
Pelegrini 524
Av. Belgrano 562
Ituzaingo 1030

(02281) 42-8719
(0291)453-5329
(03329) 48-4321
(0221) 46-14984
(03489) 42-0372
(02346) 42-4235
(02346) 44-2754
(0221) 45-20180
(02323) 43-8931
(02257) 42-1750
(0223) 472-1639
(0223) 472-9367
(0223) 476-0108
(0223) 476-4918
(0220) 477-0334
(02262) 42-6134
(02396) 47-2665
(02477) 42-1177
(03461) 45-4729
(03329) 42-5523
(02293) 44-2167
(02983) 42-7369
(03487) 42-7353

CATAMARCA
S. F. del Valle de Catamarca Omicron Central de Servicios

MISIONES
San Martin 225

(03833) 45-1498

Freschi Jorge Oscar

Av. Hernandarias 431

C.A.S. SRL

Alem 145

Esquel
Pto. Madryn
Trelew

Laboratorio Electronico
Center Electrónica
Fagtron Electrónica

Mitre 738
Sarmiento 588
Brasil 253

(0297) 444-2629
(0297) 15-625-0555
(02945) 45-1457
(02965) 45-8439
(02965) 42-7073

Serv. Téc. Especializado – Bisciglia Velez Sarsfield 19

Córdoba

Electarg S.R.L.

Avenida Colón 544

Córdoba

Servelco SRL

Pje. E. Marsilla 635

Río Cuarto
Río Tercero
Villa María
Villa María

Capaldi Abel
Service Omega
Grasso Electrónica
Vanguard Sistemas Electrónicos

Paunero 832
Homero Manzi 149
Bv. Alvear 541
México 421

(03547) 15-45-9936
(03547) 43-0848
(0351) 425-5999
(0351) 15-670-0070
(0351) 472-4008
(0351) 473-2024
(0358) 462-3003
(03571) 42-3330
(0353) 452-1366
(0353) 453-2951

CORRIENTES
Los Magos

(03783) 46-6791

LTV Service
El Taller – Mavric
Centro de Servicios Electrónicos
Laser Electrónica

9 de Julio 1442
San Martin 297
Santiago Diaz 22
Pascual Palma 382

(03442) 43-3026
(0345) 421-7069
(03446) 42-8380
(0343) 431-3056
(0343) 432-0636

FORMOSA
Vallejos Televisión

Mitre 276

(03717) 43-5985

Electrónica Pal-Color – Porfidio
Total Service Jujuy

Escolastico Zegada 47
Urdininea 233

(0388) 49-11696
(0388) 431-0911

JUJUY
Perico
S. S. de Jujuy
LA PAMPA
Gral. Pico
Santa Rosa

Electrónica M.D.
Calle 20 N° 370
Tecnocyf Centro de Servicios Av. Roca 179

(02302) 42-5047
(02954) 42-6602
(02954) 42-6836

Di Paolo 570
J.A. Roca 1124

Neuquén
S. Martín de los Andes

Tevesur
Zener Electrónica

Fotheringham 110
Elordi 614

(0299) 496-1957
(0299) 443-4855
(0299) 443-1489
(0299) 443-0679
(02972) 42-5155

A.V.C Electronica
HC Electronica - Socolovky

Saenz Peña 297
Av. 12 de Octubre 1575

(02931) 43-2688
(02944) 43-0219

Service Salta

Alvarado 1066

(0387) 431-7256

King Electrónica

Mendoza 802 (Sur)

(0264) 422-8918
(0264) 422-2720

Rizzotto Carlos Antonio
Electrónica Ciancia

Junin 679
León Guillet 380

(02652) 42-8747
(02657) 42-3990

Mariano Moreno 46

(02966) 42-0456
(02966) 43-7902

Río Colorado
Bariloche
SALTA
Salta
SAN JUAN
San Juan

San Luis
Villa Mercedes

SANTA CRUZ
Rio Gallegos

Cosmos Video

SANTA FE
Rafaela

Francesconi Reparaciones Bv. Roca 475

Reconquista
Rosario
Rosario
Rosario

Sponton Alfredo
Electarg S.R.L.
Imagen y Sonido – Allaria
SIP. S.R.L.

Habbergger 1516
Italia 1320
Pte. Roca 371
España 470

San Jorge
Santa Fé
Santa Fé
Santa Fé
Santa Fé
Santo Tome
Venado Tuerto

Mandrile Alcides
Electro TV
Litoral Service SRL
Litoral Service SRL
Siglo XXI
Siglo XXI
Degiovanni Adalberto Juan

H.Yrigoyen 1543
Talcachuano 7301
9 de Julio 2785
9 de Julio 2785
Aristóbulo del valle 4554
Falucho 2201
Av. Hipolito Yrigoyen 1289

(03492) 42-2292
(03492) 50-2292
(03482) 42-1523
(0341) 421-7700
(0341) 440-1598
(0341) 425-2625
(0341) 425-8180
(03406) 44-0513
(0342) 46-03248
(0342) 453-3563
(0342) 453-3563
(0342) 457-2827
(0342) 475-1528
(03462) 42-4613
(03462) 46-3548

SANTIAGO DEL ESTERO

LA RIOJA
La Rioja

Servitran
Gatti Electrónica

SAN LUIS
San Martin 589

ENTRE RIOS

Formosa

Cutral-Có
Neuquén

RIO NEGRO

CORDOBA

C. del Uruguay
Concordia
Gualeguaychú
Paraná

(03751) 42-4014
(03751) 42-3043
(03754) 42-1236
(03752) 42-5921
(03752) 46-7953

NEUQUEN

Comodoro Rivadavia

Corrientes

Polonia 24
C. de Obligado 247
Av. Lopez Torres 2623

(03722) 42-6030

CHUBUT

Alta Gracia

Teleson

Leandro N. Alem Megatones
Posadas
Electrónica Cejo

CHACO
Resistencia

El Dorado

Telecolor Vásquez

España 450 – B° Evita

Godoy Cruz

Video Sistemas

Fray Luis Beltrán 1729

San Rafael

Diger Service Técnico

Chile 314

(03822) 46-5354

MENDOZA

Stgo. del Estero

Barchini Raúl Enrique

Rivadavia 833

(0385) 421-3872

Marco Avellaneda 129

(0381) 422-9078

TUCUMAN
(0261) 424-1111/37
(0261) 424-9601
(02627) 42-5620

S.M. De Tucumán Edu Mag SRL

AP/11/13

31

CERTIFICADO DE GARANTÍA VALIDO EN
BOLIVIA, CHILE, PARAGUAY Y URUGUAY

¡Felicitaciones! Acaba de adquirir un producto Philips ‐ Lifestyle Entertainment.

Para su total tranquilidad, garantizamos el perfecto funcionamiento de su producto durante el período de garantía estipulado
en este documento, y ante cualquier emergencia ponemos a su disposición nuestra Red de Servicios Técnicos Autorizados
en cada país.
Philips garantiza al comprador de este producto, el normal funcionamiento contra cualquier defecto de fabricación y/o vicio
de material, y se compromete a reparar el mismo, incluyendo la mano de obra necesaria, componentes y piezas que
necesiten ser reemplazadas ‐ sin cargo alguno para el adquiriente ‐ cuando el mismo fallare en situaciones normales de uso y
bajo las condiciones que a continuación se detallan.
IMPORTANTE
1. El presente certificado de garantía es válido únicamente en los siguientes países:
1.1. Estado Plurinacional de Bolivia,
1.2. República de Chile,
1.3. República del Paraguay,
1.4. República Oriental del Uruguay.
2. Para que el mismo tenga validez, asegúrese de que los siguientes datos se encuentren completos por la casa vendedora
y preséntelo conjuntamente con el comprobante original de compra, factura o boleta.
Producto:
Modelo:
Nro. De Serie:
Fecha de Compra:
Lugar de Compra:
Firma y sello de la casa vendedora o distribuidor:

Datos del comprador:
Nombre:
Cédula de identidad / RUT:
Dirección:
Teléfono:

32

3. La validez de esta garantía, rige a partir de la fecha de adquisición y por el término de los plazos mencionados en el
siguiente cuadro, para cada tipo de producto:
PRODUCTO
GARANTIA
AUDIO PARA EL HOGAR
Mini Sistemas
1 AÑO
Micro Sistemas
1 AÑO
Parlantes con Dock Android/Apple
1 AÑO
Radio relojes (con o sin dock)
1 AÑO
Parlantes para PC
6 MESES
VIDEO PARA EL HOGAR
Home Theaters y SoundBars
1 AÑO
Reproductores de Bluray
1 AÑO
Reproductores de DVD
1 AÑO
Mini Sistemas con DVD
1 AÑO
Micro Sistemas con DVD
1 AÑO
ENTRETENIMIENTO PARA AUTOMOVILES
Autoradios
1 AÑO
Parlantes y potencias
1 AÑO

PRODUCTO
ENTRETENIMIENTO PORTÁTIL
Radios portátiles
Parlantes portátiles
Parlantes Bluetooth
Reproductores de CD portátiles
Cámaras fotográficas digitales
Reproductores de MP3 y MP4
Reproductores de DVD Portátiles
Tablets
ACCESORIOS
Marcos para fotos
Teléfonos inalámbricos
Cámaras de monitoreo por Wifi
Auriculares / Audífonos
Accesorios para aplicaciones

GARANTIA
1 AÑO
6 MESES
6 MESES
6 MESES
1 AÑO
1 AÑO
1 AÑO
1 AÑO
1 AÑO
1 AÑO
6 MESES
6 MESES
6 MESES

4. Serán causas de anulación de esta garantía, en los casos que corresponda:
4.1. El uso inadecuado del producto o distinto del uso doméstico.
4.2. Exceso o caídas de tensión eléctrica que impliquen su uso en condiciones anormales.
4.3. La instalación y/o uso en condiciones incorrectas y/o distintas a las indicadas en el “Manual de uso” que se
adjunta al producto.
4.4. Cualquier intervención del producto por terceros o personas ajenas a los Servicios Técnicos Autorizados de
Philips, quienes son los únicos para calificar y reparar las averías de los productos.
4.5. Enmiendas o raspaduras en los datos incluidos en la etiqueta del artefacto, certificado de garantía o factura.
4.6. Falta de comprobante original de compra que detalle tipo de artefacto, modelo, número de serie y fecha que
coincida con los del encabezamiento del presente certificado.
5. No están cubiertos por esta garantía los siguientes casos:
5.1. Los daños ocasionados al exterior del gabinete.
5.2. Las roturas, golpes, caídas o rayaduras causadas por traslados o descuidos del usuario.
5.3. Los daños o fallas ocasionados por deficiencias, sobretensiones / sobre voltaje, descargas o interrupciones del
circuito de conexión del artefacto a fuentes de energía eléctrica (Red eléctrica, pilas, baterías, etc).
5.4. Las fallas, daños, roturas o desgastes producidos por el maltrato o uso indebido del artefacto y/o causadas
por inundaciones, incendios, terremotos, tormentas eléctricas, golpes o accidentes de cualquier naturaleza.
5.5. Las fallas producidas por una mala recepción ocasionada en el uso de una antena deficiente o en señales de
transmisión débiles.
5.6. Las fallas o daños ocasionados en desperfectos en la línea telefónica.
6. Las condiciones de instalación y uso del artefacto se encuentran detalladas en el Manual de Uso del mismo.
7. La empresa no asume responsabilidad alguna por los daños personales o a la propiedad del usuario o a terceros que
pudieran causar la mala instalación o uso indebido del artefacto, incluyendo en este último caso a la falta de
mantenimiento.
8. En caso de falla, el usuario deberá requerir la reparación a la empresa a través del Servicio Técnico Autorizado más
próximo a su domicilio y cuyo listado acompaña el presente documento. La empresa asegura al usuario la reparación y/o
reposición de piezas para su correcto funcionamiento en un plazo no mayor a 30 días contados a partir de la fecha de
solicitud de reparación, salvo caso fortuito o de fuerza mayor.
9. Toda intervención del servicio técnico realizada a pedido del usuario dentro del plazo de garantía, que no fuera originada
por falla o defecto alguno cubierto por este certificado, deberá ser abonada por el interesado de acuerdo a la tarifa
vigente.
10. El presente certificado anula cualquier otra garantía implícita o explícita, por la cual y expresamente no autorizamos a
ninguna otra persona, sociedad o asociación a asumir por nuestra cuenta ninguna responsabilidad con respecto a
nuestros productos.

33

CENTROS DE ATENCIÓN AL CLIENTE
BOLIVIA

CHILE

Tel.: 800 100 664
(Número gratuito)

Tel.: 600 744 5477
www.philips.cl

PARAGUAY

URUGUAY

Tel.: 009 800 541 0004
(Número gratuito)

Tel.: 0004 054 176
(Número gratuito)

CENTROS DE SERVICIO TÉCNICO AUTORIZADOS
CENTROS DE SERVICIO TÉCNICO AUTORIZADOS EN BOLIVIA
CESER – BOLIVIA SRL
Jpasache@entelnet.bo
Gerente General Ing. Juan Pasache C.
Calle Villalobos N. 100 esq. Busch,
La Paz
Sr José Luis Mamani
Miraflores
La Paz
Calle Villalobos N. 1337, entre Av. Saavedra
Sr. José Luis Mamani
(Solo Talleres)
y Av. Busch, Miraflores.
Calle 4 N. 444, entre Demetrio Moscoso y
El Alto
Sr. Heriberto Vera
Francisco Carbajal, Villa Dolores
Sr. Rolando Rocha A.
Cochabamba
Calle Uruguay N. 211 esq. Nataniel Aguirre
Cochabamba

Sr. Remberto Rocha
Sr. Amilcar Delgado

Quillacollo

Sr. Fernando Rocha

Santa Cruz

Sr. Antonio Ale.

Santa Cruz
(Línea blanca)

Sr. David Paredes.

Oruro

Sr. Juan Carlos Campos.

Sucre

Sr. Amael Cocha

Tarija

Sr. Ruben Montoya

Montero

Centro de Acopio
(no atiende clientes)

Potosi

Sr. Amael Cocha

Calle Arque N. 1904, entre Angostura y Av.
Ayacucho, Zona Sud frente a rieles estación
Av. Blanco Galindo N. 410 Km 13,5, al
costado de la Residencial Reyna
Calle Colón N. 321, enter Pari y Mercado
Av. Paragua 2415‐A, entre 2do y 3er anillo
entrando por calle Socoris
Calle Pagador N. 5779, entre Ayacucho y
Cochabamba
Calle Pando N. 10, Zona Mercado
Campesino
Calle Junin 767, entre Bolivar e Ingavi,
Cercado
Av. Circunvalación N. 800 esq. Buenos Aires,
Barrio 25 de Diciembre
Calle 1ero de Abril N. 700, entre Calle
Bustillos y Chayanta, Zona Central

CENTROS DE SERVICIO TÉCNICO AUTORIZADOS EN CHILE
I
Iquique
Servitec
Hernán Fuenzalida 1030
II
III
IV

V

VI

34

Antofagasta

Casa Delta

Prat 789

Calama

Servicio Técnico Carvajal

Latorre 1452

Copiapó

Electrónica El Palomar

Salitrera Rosario 2192, El Palomar

La Serena

Centro Técnico Acuarela

Balmaceda 373

La Serena
Coquimbo

Electrónica Nueva Zener
Electronica Belen

O”Higgins 701 B
Los Clarines 870 Psindempart

San Felipe

Electronica Max Echeverria

Av. Bernardo O´Higgins 279‐A

Limache
Valparaiso
Viña del Mar
Rancagua
San Fernando
Santa Cruz

Elena Álvarez
Servicio Tec. Viña del Mar
Servicio Tec. Viña del Mar
Multivisión
Electrónica Colchagua
Electronica Livaj

Urmeneta 365
Huito 572
Quinta 209
Ibieta 223
España 711
Av. Errázuriz 1096 –A

(02) 212‐4913
(02) 222‐4924
_
Cel 775‐44269
(04) 450‐1894
(04) 412‐6762
(04) 412‐4724
(04) 436–7513
(03) 330‐3292
(03) 311‐4649
(03) 390‐1672
(02) 511‐1866
(04) 64‐65089
(04) 66‐58267
(03) 92‐27523
Cel 604‐74537

57 ‐ 2575139
55 ‐ 2268883
55 ‐ 2261788
55 ‐ 2361046
52 ‐ 2233328
52 ‐ 2364767
51 ‐ 2222729
51 ‐ 2225229
51 ‐ 2224576
51 ‐ 2261052
34 ‐ 2505064
34 ‐ 2535433
33 ‐ 2412553
32 ‐ 2253925
32 ‐ 2882691
72 ‐ 2228429
72 ‐ 2717207
72 ‐ 2821322

VII

Curicó

Audio Video Sistemas Ltda.

Vidal 671

Talca

Audiovisión

9 Oriente 1121

Talca

7 Norte 3060
2 Sur 1667, entre 9 y 10 Oriente

Linares

Servital
Centro de Atención Técnica
Ltda.
Tecnihogar

Chillán

Telestereo

5 de Abril 336

Talca

VIII

IX

Lautaro 533

Concepción

Cristina C. Avello M

Las Heras 259, 2° piso.

Los Ángeles
Angol

Julio Quiroz
ABT Electronica

Galvarino 420
Covadonga 1475

Temuco

Esina (Temuco)

Manuel Montt 198

Pucon
Osorno

BRADI Servicios de
Ingenieria SpA
Marcelo Alejandro Ciraulo
Servitodo Electrónica

Puerto Montt

Full Service

Antonio Varas 70 B

XIV

Coyhaique
Punta Arenas
Providencia
La Florida
Maipú
Melipilla
Valdivia

Servitelco
Electrónica MT
Plus Service
INSEL
PCElectrónica
Jaime Osorio y Cia.
Esina (Valdivia)

General Parra 220, Loc 2
Belisario Garcia 0781
Av. Santa María 0858 ‐ Providencia
Avenida La Florida 9039
Chacabuco 271 ‐ Maipu
Ortuzar 164 Melipilla
Arauco 842

XV

Arica

Centro Tecnico Integral

Juan Noe 1233

X
XI
XII
RM

Castro

75 ‐ 2311561
71 ‐ 2225974
71 ‐ 2233540
(movil) 9‐5491620
71 ‐ 2212576
71 ‐ 2210729
73 ‐ 2213031
42 ‐ 2224155
42 ‐ 2329272
42 ‐ 2231515
41 ‐ 2232641
41 ‐ 2981508
43 ‐ 2313161
(movil) 7‐4564738
45 ‐ 2261885
45 ‐ 2242727

Sargento Aldea 589

65 ‐ 2534647

Brasil 445
Perez 559

45 ‐ 2441823
64 ‐ 2232874
65 ‐ 2717720
65 ‐ 2254867
67 ‐ 2231149
61 ‐ 2218841
2 ‐ 24840800
2 ‐ 22873808
2 ‐ 25340927
2 ‐ 28323153
63 ‐ 2253505
58 ‐ 2231981
58 ‐ 2314026

CENTROS DE SERVICIO TÉCNICO AUTORIZADOS EN PARAGUAY
Asunción
Umesys SRL
R.I. 6 Boquerón 1559, c/ Serafina Dávalos
Asunción

Sirio SRL

Asunción

SCJ Service

Av. Gral. Artigas N° 1295 c/ Av. Gral. Santos

Ciudad del Este

Audio & Video

Iturbe 470 e/cerro Corá y 25 de Mayo

(021) 623835
(021) 449753
(021) 447333
(021) 203465
(021) 226583
(061) 502962

Concepción

Electrónica Concepción

Coronel Oviedo

Electrónica Total

Paso de Patria c/ Av. Gral. Bernardino Caballero
Prof. Hernan Aponte c/ Antonio Caba (Bo.
Primavera)
Gral. Eugenio A. Garay Nº148 C/Tte. Fariña

Encarnación

Makoto Servicio Técnico

Villarrica 472 c/ Carlos Antonio López

VICSA Electrónica

Brasil c/ Teresa Roa Caballero

(0336) 273399

Servimas Electrónica

Coronel Zoilo González c/Antequera

Néstor Electrónica

República Argentina c/ Ita Ybate

(0981) 977654
(0541) 40803
(0981) 631619

Pedro Juan
Caballero
San Estanislao
Villarrica

CENTROS DE SERVICIO TÉCNICO AUTORIZADOS EN URUGUAY
Montevideo

CKL Uruguay S.R.L.

Gaboto 1550 esquina Mercedes

(0331) 240960
(0521) 205466
(071) 202616
(071) 202516

(598) 2402‐3951
(598) 2400‐8735

35

Specifications are subject to change without notice
© 2014 Koninklijke Philips N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
HTD5520/5550/5580_55_UM_V1.0



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Jackie Huang & Lily Zhang
Modify Date                     : 2014:04:18 11:38:20+08:00
Create Date                     : 2014:04:18 11:35:56+08:00
Metadata Date                   : 2014:04:18 11:38:20+08:00
Document ID                     : uuid:0c1d32ac-87ee-461a-b228-d4cfcd51160f
Instance ID                     : uuid:9b027a61-4232-4919-81cd-38584dcce9d9
Page Layout                     : SinglePage
Page Count                      : 40
Author                          : Jackie Huang & Lily Zhang
EXIF Metadata provided by EXIF.tools

Navigation menu