Pioneer K045 CD RDS RECEIVER User Manual DEH P8400BH EN

Pioneer Corporation CD RDS RECEIVER DEH P8400BH EN

Contents

User Manual_DEH-P8400BH(EN)

Owner’s ManualMode d’emploiManual de instruccionesCD RDS RECEIVERAUTORADIO CD RDSREPRODUCTOR DE CD CON RECEPTOR RDSDEH-P8400BHDEH-P7400HDEnglish EspañolFrançais
Before you startInformation to User 2The Safety of Your Ears is in YourHands 3About this unit 3After-sales service for Pioneerproducts 3In case of trouble 3Visit our website 3Demo mode 4About this manual 4Operating this unitHead unit 4Remote control 4Set up menu 5Basic operations 5Use and care of the remote control 6Menu operations identical for functionsettings/audio adjustments/initialsettings/lists 6Tuner 7CD/CD-R/CD-RW and USB storagedevices 8iPod 9Using Pandoraâ10Audio adjustments 11Using Bluetooth wireless technology 12Initial settings 14Other functions 16Available accessoriesBluetooth Audio 18Bluetooth telephone 19XM tuner 22SIRIUS Satellite Radio tuner 23InstallationConnections 25Installation 26Installing the microphone 28Additional informationTroubleshooting 29Error messages 29Handling guidelines 31Compressed audio compatibility (disc,USB) 32iPod compatibility 33Sequence of audio files 33Bluetooth profiles 33Copyright and trademark 33Specifications 34Thank you for purchasing this PIONEERproductTo ensure proper use, please read through thismanual before using this product. It is especiallyimportant that you read and observe WARN-INGs and CAUTIONs in this manual. Pleasekeep the manual in a safe and accessible place forfuture reference.FCC ID: AJDK045MODEL NO.: DEH-P8400BHIC: 775E-K045This device complies with Part 15 of FCCRules and Industry Canada licence-exemptRSS standard(s). Operation is subject to thefollowing two conditions: (1) this device maynot cause interference, and (2) this devicemust accept any interference, including inter-ference that may cause undesired operationof this device.This transmitter must not be co-located or op-erated in conjunction with any other antennaor transmitter.The antenna for Bluetooth cannot be removed(or replaced) by user.This equipment complies with FCC/IC radia-tion exposure limits set forth for an uncon-trolled environment and meets the FCC radiofrequency (RF) Exposure Guidelines in Sup-plement C to OET65 and RSS-102 of the ICradio frequency (RF) Exposure rules. Thisequipment has very low levels of RF energythat it deemed to comply without maximumpermissive exposure evaluation (MPE). But itis desirable that it should be installed and op-erated keeping the radiator at least 20 cm ormore away from person’s body (excluding ex-tremities: hands, wrists, feet and ankles).MODEL NO.: DEH-P7400HDThis device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interfer-ence, and (2) this device must accept any in-terference received, including interferencethat may cause undesired operation.Information to UserAlteration or modifications carried out with-out appropriate authorization may invalidatethe user’s right to operate the equipment.Contents2SectionBefore you startEn01
NoteThis equipment has been tested and foundto comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reason-able protection against harmful interferencein a residential installation. This equipmentgenerates, uses and can radiate radio fre-quency energy and, if not installed and usedin accordance with the instructions, maycause harmful interference to radio commu-nications. However, there is no guaranteethat interference will not occur in a particu-lar installation. If this equipment does causeharmful interference to radio or television re-ception, which can be determined by turningthe equipment off and on, the user is encour-aged to try to correct the interference by oneor more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equip-ment and receiver.- Connect the equipment into an outlet on acircuit different from that to which the re-ceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.The Safety of Your Ears is inYour HandsGet the most out of your equipment by playing itat a safe level—a level that lets the sound comethrough clearly without annoying blaring or dis-tortion and, most importantly, without affectingyour sensitive hearing. Sound can be deceiving.Over time, your hearing “comfort level”adapts tohigher volumes of sound, so what sounds “nor-mal”can actually be loud and harmful to yourhearing. Guard against this by setting yourequipment at a safe level BEFORE your hearingadapts.ESTABLISH A SAFE LEVEL:!Set your volume control at a low setting.!Slowly increase the sound until you can hearit comfortably and clearly, without distortion.!Once you have established a comfortablesound level, set the dial and leave it there.BE SURE TO OBSERVE THEFOLLOWING GUIDELINES:!Do not turn up the volume so high that youcan’t hear what’s around you.!Use caution or temporarily discontinue usein potentially hazardous situations.!Do not use headphones while operating amotorized vehicle; the use of headphonesmay create a traffic hazard and is illegal inmany areas.About this unitThe tuner frequencies on this unit are allocatedfor use in North America. Use in other areasmay result in poor reception.WARNINGHandling the cord on this product or cords asso-ciated with accessories sold with the productmay expose you to chemicals listed on proposi-tion 65 known to the State of California andother governmental entities to cause cancer andbirth defect or other reproductive harm. Washhands after handling.CAUTION:USE OF CONTROL OR ADJUSTMENT ORPERFORMANCE OF PROCEDURESOTHER THAN THOSE SPECIFIED HEREINMAY RESULT IN HAZARDOUS RADIATIONEXPOSURE.CAUTION:THE USE OF OPTICAL INSTRUMENTSWITH THIS PRODUCT WILL INCREASEEYE HAZARD.CAUTION!Do not allow this unit to come into contactwith liquids. Electrical shock could result.Also, damage to this unit, smoke, and over-heating could result from contact withliquids.!Always keep the volume low enough to hearoutside sounds.!Avoid exposure to moisture.!If the battery is disconnected or discharged,any preset memory will be erased.Important (Serial number)The serial number is located on the bottom ofthis unit. For your own security and conven-ience, be sure to record this number on the en-closed warranty card.NoteFunction setting operations are completed evenif the menu is cancelled before the operationsare confirmed.After-sales service forPioneer productsPlease contact the dealer or distributor fromwhere you purchased this unit for after-salesservice (including warranty conditions) or anyother information. In case the necessary infor-mation is not available, please contact the com-panies listed below:Please do not ship your unit to the companies atthe addresses listed below for repair without ad-vance contact.U.S.A.Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404CANADAPioneer Electronics of Canada, Inc.CUSTOMER SATISFACTION DEPARTMENT340 Ferrier StreetUnit 2Markham, Ontario L3R 2Z5, Canada1-877-283-5901905-479-4411For warranty information please see the LimitedWarranty sheet included with this unit.In case of troubleShould this unit fail to operate properly, pleasecontact your dealer or nearest authorizedPIONEER Service Station.Visit our websitehttp://www.pioneerelectronics.comin CanadaEnglishBefore you start3SectionBefore you startEn01
http://www.pioneerelectronics.ca!Learn about product updates (such as firm-ware updates) for your product.!Register your product to receive noticesabout product updates and to safeguard pur-chase details in our files in the event of lossor theft.!Access owner’s manuals, spare parts infor-mation, service information, and muchmore.Demo modeImportant!Failure to connect the red lead (ACC) of thisunit to a terminal coupled with ignitionswitch on/off operations may lead to batterydrain.!Remember that if the feature demo contin-ues operating when the car engine is turnedoff, it may drain battery power.The demo starts automatically if you do not oper-ate this unit within about 30 seconds since itwas last operated or if the ignition switch is setto ACC or ON while it is turned off. To cancel thedemo mode, press and hold ( /DISP). Pressand hold ( /DISP) again to start. You can alsodeactivate demo mode in the initial settings. Se-lect Demonstration (demo display setting) andturn off the demo display. For details, refer to Ini-tial settings on page 14.About this manual!In the following instructions, USB memoriesand USB audio players are collectively re-ferred to as “USB storage device”.!In this manual, iPod and iPhone will be re-ferred to as “iPod”.Head unit(DEH-P8400BH)1 2a45678d c b39Part Part1SRC/OFF 8AUX input jack(3.5 mm stereojack)2(list) 9/3LEVER aMULTI-CONTROL(M.C.)4Disc loading slot b/DISP5h(eject) cBAND/(iPod)6PHONE (phone/on hook) dMIX7Detach button(DEH-P7400HD)1 2a45678d c b39Part Part1SRC/OFF 8AUX input jack(3.5 mm stereojack)2(list) 9/3LEVER aMULTI-CONTROL(M.C.)4Disc loading slot b/DISP5h(eject) cBAND/(iPod)6CLOCK dMIX7Detach buttonCAUTIONUse a Pioneer USB cable when connecting theUSB audio player/USB memory device as devi-ces connected to the unit directly will protrudeout, which is dangerous.Do not use unauthorized products.Remote controlRemote controller buttons marked with thesame numbers as on the unit operate in thesame way as the corresponding unit button re-gardless of button name.(DEH-P8400BH)eki1cfbhjgBefore you start4SectionOperating this unitEn0102
Part OperationeVOLUME Press to increase or decreasevolume.fMUTE Press to mute. Press again tounmute.ga/b/c/dPress to perform manual seektuning, fast forward, reverseand track search controls.Also used for controlling func-tions.hWhile operating the phone,press to end a call or reject anincoming call.iePress to pause or resume play-back.jPress to start talking on thephone while operating aphone.kLIST/ENTERPress to display the disc title,track title, folder, or file list de-pending on the source.While in the operating menu,press to control functions.(DEH-P7400HD)eki1cfbhjgPart OperationeVOLUME Press to increase or decreasevolume.fMUTE Press to mute. Press again tounmute.ga/b/c/dPress to perform manual seektuning, fast forward, reverseand track search controls.Also used for controlling func-tions.hAUDIO Press to select an audio func-tion.iePress to pause or resume play-back.jFUNC-TIONPress to select functions.Press and hold to recall the ini-tial setting menu when thesources are off.kLIST/ENTERPress to display the disc title,track title, folder, or file list de-pending on the source.While in the operating menu,press to control functions.Set up menuWhen you turn the ignition switch to ON after in-stallation, set up menu appears on the display.You can set up the menu options below.1 After installation of this unit, turn theignition switch to ON.SET UP appears.2 Turn M.C. to switch to YES.#If you do not operate for 30 seconds, the set upmenu will not be displayed.#If you prefer not to set up at this time, turn M.C.to switch to NO.If you select NO, you cannot set up in the set upmenu.3 Press M.C. to select.4 Perform the following procedures to setthe menu.To proceed to the next menu option, you need toconfirm your selection.Language select (multi-language)1Turn M.C. to select the desired language.English—Français—Español2Press M.C. to confirm the selection.Calendar (setting the date)1Turn M.C. to change the year.2Press M.C. to select day.3Turn M.C. to change the day.4Press M.C. to select month.5Turn M.C. to change the month.6Press M.C. to confirm the selection.Clock (setting the clock)1Turn M.C. to adjust hour.2Press M.C. to select minute.3Turn M.C. to adjust minute.4Press M.C. to confirm the selection.Contrast (display contrast setting)1Turn M.C. to adjust the contrast level.0to 15 is displayed as the level is increased ordecreased.2Press M.C. to confirm the selection.Demonstration (demo display setting)1Turn M.C. to set the demo display to off.2Press M.C. to confirm the selection.Quit appears.5 To finish your settings, turn M.C. to selectYES.#If you prefer to change your setting again, turnM.C. to switch to NO.6 Press M.C. to select.Notes!Because demonstration mode is the functionfor displaying at stores, do not use this func-tion while driving.!You can set up the menu options in the initialsettings. For details about the settings, referto Initial settings on page 14.!You can cancel set up menu by pressingSRC/OFF.Basic operationsImportant!Handle gently when removing or attachingthe front panel.!Avoid subjecting the front panel to excessiveshock.!Keep the front panel out of direct sunlightand high temperatures.!To avoid damaging the device or vehicle inte-rior, remove any cables and devices attachedto the front panel before detaching it.EnglishOperating this unit5SectionOperating this unitEn02
Removing the front panel to protect your unit fromtheft1Press the detach button to release the frontpanel.2Push the front panel upward (M) and then pullit toward (N) you.3Always keep the detached front panel in a pro-tection device such as a protection case.Re-attaching the front panel1Slide the front panel to the left.Make sure to insert the tabs on the left side ofthe head unit into the slots on the front panel.2Press the right side of the front panel until it isfirmly seated.If you cannot attach the front panel to thehead unit successfully, make sure that you areplacing the front panel onto the head unit cor-rectly. Forcing the front panel into place mayresult in damage to the front panel or headunit.Turning the unit on1Press SRC/OFF to turn the unit on.Turning the unit off1Press and hold SRC/OFF until the unit turnsoff.Selecting a source1Press SRC/OFF to cycle between:XM (XM tuner)—SIRIUS (SIRIUS tuner)—TUNER (tuner)—CD (CD player)—USB (USBstorage device)/iPod (iPod connected usingUSB input)—Pandora (Pandora)—EXT (exter-nal unit 1)—EXT (external unit 2)—AUX1(AUX1)—AUX2 (AUX2)—BT Audio (BT audio)—TEL (BT telephone)Adjusting the volume1Turn M.C. to adjust the volume.CAUTIONFor safety reasons, park your vehicle when re-moving the front panel.Notes!When this unit’s blue/white lead is con-nected to the vehicle’s auto-antenna relaycontrol terminal, the vehicle’s antenna ex-tends when this unit’s source is turned on.To retract the antenna, turn the source off.!If plug and play is on and either an iPhone oriPod touch is connected, it may take time foryour source to switch. Refer toUSB plug&play (plug and play) on page 15.!TEL (BT telephone) is available on DEH-P7400HD only when a Bluetooth adapter (e.g. CD-BTB200) is connected to the unit.Use and care of the remotecontrolUsing the remote control1Point the remote control in the direction of thefront panel to operate.When using for the first time, pull out the filmprotruding from the tray.Replacing the battery1Slide the tray out on the back of the remotecontrol.2Insert the battery with the plus (+) and minus(–) poles aligned properly.WARNING!Keep the battery out of the reach of children.Should the battery be swallowed, consult adoctor immediately.!Batteries (battery pack or batteries installed)must not be exposed to excessive heat suchas sunshine, fire or the like.CAUTION!Use one CR2025 (3 V) lithium battery.!Remove the battery if the remote control isnot used for a month or longer.!There is a danger of explosion if the battery isincorrectly replaced. Replace only with thesame or equivalent type.!Do not handle the battery with metallic tools.!Do not store the battery with metallic ob-jects.!If the battery leaks, wipe the remote controlcompletely clean and install a new battery.!When disposing of used batteries, complywith governmental regulations or environ-mental public institutions’rules that apply inyour country/area.!“Perchlorate Material –special handling mayapply.See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California,U.S.A.)”Important!Do not store the remote control in high tem-peratures or direct sunlight.!The remote control may not function properlyin direct sunlight.!Do not let the remote control fall onto thefloor, where it may become jammed underthe brake or accelerator pedal.Menu operations identicalfor function settings/audioadjustments/initial settings/listsReturning to the previous displayReturning to the previous list/category. (the folder/category one level higher.)1Press /DISP.Turning the demo display on or off1Press and hold /DISP.Returning to the ordinary displayCanceling the initial setting menu1Press BAND/.Returning to the ordinary display from the list/cat-egory1Press BAND/.Selecting a function or list1Turn M.C. or LEVER.!In this manual, “Turn M.C.”is used to describethe operation used to select a function or list.Operating this unit6SectionOperating this unitEn02
TunerAbout HD RadioäbroadcastingHD Radioäbroadcasting is high quality audioand data services. HD Radio broadcasting isbrought to you by your local FM/AM stations.HD Radio broadcasting features the following:!High quality audio!FM multicasting!Data servicesProgram Service Data: Contributes to the superior userexperience of HD Radio Technology. Presents song name,artist, station IDs, HD2/HD3 Channel Guide, and other rel-evant data streams.Adjacent to traditional main stations are extra local FMchannels. These HD2/HD3 Channels provide new, originalmusic as well as deep cuts into traditional genre.Digital, CD-quality sound. HD Radio Technology enableslocal radio stations to broadcast a clean digital signal.AM sounds like today’s FM and FM sounds like a CD.iTunesâTagging provides you the opportunity to discovera wide range of content and the means to “tag”that con-tent for later review and purchase from the iTunesâStore.Basic operations91 5 7432 861TAG indicator2Tags transferring indicator3Signal reception status indicatorWhen digital signal is received, is dis-played. Otherwise, is displayed.4Band indicator55(stereo) indicator6LOC indicatorAppears when local seek tuning is on.7Preset number indicator8Signal level indicator9Frequency indicatorSelecting a band1Press BAND/until the desired band (FM-1,FM-2,FM-3 for FM or AM) is displayed.Manual tuning (step by step)1Turn LEVER.!When an analog station is received, tuningdown operation is conducted within theanalog broadcasting. (6d2)!If a digital broadcast is not yet received,tuning-up operation tunes in the next ana-log station. (2d6)Seeking1Turn and hold down LEVER.!While turning and holding down LEVER,you can skip stations. Seek tuning startsas soon as you release LEVER.Storing and recalling stationsfor each band1 Press (list).The preset screen is displayed.2 Use M.C. to store the selected frequencyin the memory.Turn to change the preset number. Press andhold to store.3 Use M.C. to select the desired station.Turn to change the station. Press to select.#You can also change the station by pressingor .#Press BAND/or (list) to return to the ordi-nary display.Switching the displayDesired information can be displayed while taginformation has been broadcasting.Selecting the desired text information1Press /DISP.Frequency or program service name—songtitle and artist nameUsing iTunes taggingThis function can be operated with the followingiPod models.—iPod touch 4th generation—iPod touch 3rd generation—iPod touch 2nd generation—iPod touch 1st generation—iPod classic 160GB—iPod classic 120GB—iPod classic—iPod nano 6th generation—iPod nano 5th generation—iPod nano 4th generation—iPod nano 3rd generation—iPhone 4—iPhone 3GS—iPhone 3G—iPhoneHowever, tag information can be stored in thisunit even while other iPod models are used.The song information (tag) can be saved fromthe broadcasting station to your iPod. The songswill show up in a playlist called “Tagged playlist”in iTunes the next time you sync your iPod. Thenyou can directly buy the songs you want fromthe iTunes Store.!The tagged songs and the song that you canbuy from the iTunes Store may be different.Make sure to confirm the song before youmake the purchase.EnglishOperating this unit7SectionOperating this unitEn02
Storing the tag information to this unit1Tune in to the broadcast station.2Press and hold M.C. if TAG is indicated in thedisplay while desired song is broadcasting.!While storing the tag data on this unit,TAG flashes.Storing the tagged information to your iPod1Connect the iPod to this unit and transfer thisunit’s tag information to the iPod.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.BSM (best stations memory)BSM (best stations memory) automatically storesthe six strongest stations in the order of their sig-nal strength.1Press M.C. to turn BSM on.To cancel, press M.C. again.Local (local seek tuning)Local seek tuning lets you tune in to only thoseradio stations with sufficiently strong signals forgood reception.1Press M.C. to select the desired setting.FM: OFF—Level 1—Level 2—Level 3—Level4AM: OFF—Level 1—Level 2The highest level setting allows reception ofonly the strongest stations, while lower levelsallow the reception of weaker stations.Seek mode (seek mode)Seek tuning setting can be changed between digi-tal station seek (Seek HD) and all station seek(Seek ALL) depending on the reception status.1Press M.C. to select your favorite setting.Seek ALL—Seek HDBlending (reception mode)If a digital broadcast reception condition getspoor, this unit automatically switches to the ana-log broadcast of the same frequency level. If thisfunction is set to on, the tuner switches betweendigital broadcast and analog broadcast automati-cally. If this function is off, reception will be con-ducted within an analog broadcast.1Press M.C. to turn this function on or off.NoteIf Seek mode is set to Seek HD and Blending isset to off, the tuner cannot receive broadcasts.In this case, the seek mode or reception mode ischanged automatically as follows:!When Seek mode is set to Seek HD, if youswitch Blending from on to off, Seek mode ischanged to Seek ALL.!When Blending is set to off, if you switchSeek mode from Seek ALL to Seek HD,Blending is changed to on.CD/CD-R/CD-RW and USBstorage devicesBasic operations75 643211Bit rate/sampling frequency indicatorShows the bit rate or sampling frequency ofthe current track (file) when the compressedaudio is playing.!When playing back VBR (variable bitrate)-recorded AAC files, the average bitrate value is displayed. However, depend-ing on the software used to decode AACfiles, VBR may be displayed.2Folder number indicatorShows the folder number currently playingwhen the compressed audio is playing.3Track number indicator4PLAY/PAUSE indicator5S.Rtrv indicatorAppears when Sound Retriever function ison.6Song time (progress bar)7Play time indicatorPlaying a CD/CD-R/CD-RW1Insert the disc into the disc loading slot withthe label side up.Ejecting a CD/CD-R/CD-RW1Press h(eject).Playing songs on a USB storage device1Use a Pioneer USB cable to connect the USBstorage device to the unit.!Plug in the USB storage device using the USBcable.Stopping playback of files on a USB storage de-vice!You may disconnect the USB storage device atany time.Selecting a folder1Press or .Selecting a track1Turn LEVER.Fast forwarding or reversing1Turn and hold down LEVER to the right or left.Returning to root folder1Press and hold BAND/.Switching between compressed audio and CD-DA1Press BAND/.Switching between playback memory devicesYou can switch between playback memory deviceson USB storage devices with more than one MassStorage Device-compatible memory device.1Press BAND/.!You can switch between up to 32 differentmemory devices.Notes!When playing compressed audio, there is nosound during fast forward or reverse.!Disconnect USB storage devices from theunit when not in use.Displaying text informationSelecting the desired text information1Press /DISP.Notes!Depending on the version of iTunes used towrite MP3 files to a disc or media file types,incompatible text stored within an audio filemay be displayed incorrectly.!Text information items that can be changeddepend on the media.Selecting and playing files/tracks from the name list1 Press (list) to switch to the file/trackname list mode.Operating this unit8SectionOperating this unitEn02
2 Use both LEVER and M.C. to select the de-sired file name (or folder name).Changing the file or folder name1Turn LEVER.Playing1When a file or track is selected, press M.C.Viewing a list of the files (or folders) in the se-lected folder1When a folder is selected, press M.C.Playing a song in the selected folder1When a folder is selected, press and hold M.C.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Play mode (repeat play)1Press M.C. to select a repeat play range.CD/CD-R/CD-RW!Disc repeat –Repeat all tracks!Track repeat –Repeat the current track!Folder repeat –Repeat the current folderUSB audio player/USB memory!All repeat –Repeat all files!Track repeat –Repeat the current file!Folder repeat –Repeat the current folderRandom mode (random play)1Press M.C. to turn random play on or off.Pause (pause)1Press M.C. to pause or resume.Sound Retriever (sound retriever)Automatically enhances compressed audio andrestores rich sound.1Press M.C. to select the desired setting.1—2—OFF (off)OFF (off)—1—2(MIXTRAX)1is effective for low compression rates, and 2is effective for high compression rates.iPodBasic operations75 643211Repeat indicator2Song number indicator3Shuffle indicator4PLAY/PAUSE indicator5S.Rtrv indicatorAppears when Sound Retriever function ison.6Song time (progress bar)7Play time indicatorPlaying songs on an iPod1Connect an iPod to the USB cable using aniPod Dock Connector.Selecting a track (chapter)1Turn LEVER.Fast forwarding or reversing1Turn and hold down LEVER to the right or left.Selecting an album1Press or .Notes!The iPod cannot be turned on or off when thecontrol mode is set to AUDIO.!Disconnect headphones from the iPod be-fore connecting it to this unit.!The iPod will turn off about two minutes afterthe ignition switch is set to OFF.Displaying text informationSelecting the desired text information1Press /DISP.Browsing for a song1 Press (list) to switch to the top menuof the list search.2 Use M.C. to select a category/song.Changing the name of the song or category1Turn M.C.Playlists (playlists)—Artists (artists)—Albums(albums)—Songs (songs)—Podcasts (pod-casts)—Genres (genres)—Composers (com-posers)—Audiobooks (audiobooks)Playing1When a song is selected, press M.C.Viewing a list of songs in the selected category1When a category is selected, press M.C.Playing a song in the selected category1When a category is selected, press and holdM.C.Searching the list by alphabet1When a list for the selected category is dis-played, press to switch to alphabet searchmode.2Turn M.C. to select a letter.3Press M.C. to display the alphabetical list.Notes!You can play playlists created with the PC ap-plication (MusicSphere). The application willbe available on our website.!Playlists that you created with the PC appli-cation (MusicSphere) are displayed in abbre-viated form.Playing songs related to thecurrently playing songYou can play songs from the following lists.•Album list of the currently playing artist•Song list of the currently playing album•Album list of the currently playing genre1 Press and hold M.C. to switch to link playmode.2 Turn M.C. to change the mode; press toselect.!Artist –Plays an album of the artist currentlybeing played.!Album –Plays a song from the album cur-rently being played.!Genre –Plays an album from the genre cur-rently being played.The selected song/album will be played after thecurrently playing song.Notes!The selected song/album may be canceled ifyou operate functions other than link search(e.g. fast forward and reverse).!Depending on the song selected to play, theend of the currently playing song and the be-ginning of the selected song/album may becut off.Operating this unit’s iPodfunction from your iPodYou can listen to the sound from your iPod appli-cations using your car’s speakers, when APP isselected.EnglishOperating this unit9SectionOperating this unitEn02
This function is not compatible with the follow-ing iPod models.—iPod with video—iPod nano 1st generationAPP Mode is compatible with the following iPodmodels.!iPod touch 4th generation (software version4.1 or later)!iPod touch 3rd generation (software version3.0 or later)!iPod touch 2nd generation (software version3.0 or later)!iPod touch 1st generation (software version3.0 or later)!iPod nano 6th generation (software version1.0 or later)!iPod nano 5th generation (software version1.0.2 or later)!iPhone 4 (software version 4.1 or later)!iPhone 3GS (software version 3.0 or later)!iPhone 3G (software version 3.0 or later)!iPhone (software version 3.0 or later)1Press BAND/to switch the control mode.!iPod –This unit’s iPod function can beoperated from the connected iPod.!APP –Play back the sound from youriPod applications.!AUDIO –This unit’s iPod function can beoperated from this unit.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Play mode (repeat play)1Press M.C. to select a repeat play range.!Repeat One –Repeat the current song!Repeat All –Repeat all songs in the se-lected listShuffle mode (shuffle)1Press M.C. to select your favorite setting.!Shuffle Songs –Play back songs in the se-lected list in random order.!Shuffle Albums –Play back songs from arandomly selected album in order.!Shuffle OFF –Cancel random play.Shuffle all (shuffle all)1Press M.C. to turn shuffle all on.To turn off, set Shuffle mode in the FUNC-TION menu to off.Link play (link play)1Press M.C. to display the setting mode.2Turn M.C. to change the mode; press to select.For details about the settings, refer to Playingsongs related to the currently playing song onthe previous page.Pause (pause)1Press M.C. to pause or resume.Audiobooks (audiobook speed)1Press M.C. to select your favorite setting.!Faster –Playback at a speed faster thannormal!Normal –Playback at normal speed!Slower –Playback at a speed slower thannormalSound Retriever (sound retriever)1Press M.C. to select the desired setting.1—2—OFF (off)OFF (off)—1—2(MIXTRAX)1is effective for low compression rates, and 2is effective for high compression rates.Notes!Switching the control mode to iPod pausessong playback. Operate the iPod to resumeplayback.!The following functions are still accessiblefrom the unit even if the control mode is setto iPod/APP.—Pausing—Fast forward/reverse—Track up/down!When the control mode is set to iPod/APP,only Pause or Sound Retriever is available.!The browse function cannot be operatedfrom this unit.Using PandoraâIMPORTANT:Requirements to access the Pandora musicservice using the Pioneer car audio/video prod-ucts:!iPhone (first generation), iPhone 3G, iPhone 3GS,iPhone 4G, iPod touch 1G, iPod touch 2G, iPodtouch 3G or iPod touch 4G (firmware version 3.0or later).Certain firmware versions for the iPod touch andiPhone may not be compatible with the Pandoraapplication. If this appears to be the case, pleaseupdate the firmware to a version that is compati-ble with Pandora.!Latest version of the Pandora application for theiPhone, downloaded to your device. (SearchApple iTunes App Store for “Pandora”).!Current Pandora account (Free account and paidaccounts available from Pandora; create a freeaccount online athttp://www.pandora.com/register or through thePandora application for the iPhone).!iPhone Data Plan.Note: If the Data Plan for your iPhone does notprovide for unlimited data usage, additionalcharges from your carrier may apply for accessingthe Pandora service via 3G and/or EDGE net-works.!Connection to the Internet via 3G, EDGE or Wi-Finetwork.!Optional Pioneer adapter cable connecting youriPhone to the Pioneer car audio/video products.Limitations:!Access to the Pandora service will depend on theavailability of a cellular and/or Wi-Fi network forpurposes of allowing your iPhone to connect tothe Internet.!Pandora’s service is currently only available inthe U.S.!Ability of the Pioneer car audio/video products toaccess the Pandora service is subject to changewithout notice and could be affected by any ofthe following: compatibility issues with futurefirmware versions of iPhones; compatibility is-sues with future firmware versions of thePandora application for the iPhone; changes tothe Pandora music service by Pandora; discontin-uation of the Pandora music service by Pandora.!Certain functionality of the Pandora service is notavailable when accessing the service through thePioneer car audio/video products, including, butnot limited to, creating new stations, deleting sta-tions, emailing current stations, buying tracksfrom iTunes, viewing additional text information,logging in to Pandora, and adjusting Cell Net-work Audio Quality.Pandora Internet radio is a music service not af-filiated with Pioneer. More information is avail-able at http://www.pandora.com.Operating this unit10SectionOperating this unitEn02
You can play the Pandora by connecting youriPod which was installed the Pandora applica-tion.Basic operations64 531 21Thumbs Up/Thumbs Down indicator2QuickMix indicator3PLAY/PAUSE indicator4S.Rtrv indicatorAppears when Sound Retriever function ison.5Song time (progress bar)6Play time indicatorPlaying tracks1Connect an iPod to the USB cable using aniPod Dock Connector.2Start up the Pandora application installed onthe iPod.Giving a Thumbs Up1Press to give a “Thumbs Up”for thetrack currently playing.Giving a Thumbs Down1Press to give a “Thumbs Down”for thetrack currently playing and to skip to the nexttrack.Skipping tracks1Turn LEVER to the right.Displaying text informationSelecting the desired text information1Press /DISP.Selecting and playing theQuickMix/station list1 Press (list) to switch to the QuickMix/station list mode.2 Use M.C. to select the QuickMix or de-sired station.Changing the sort order1Press (list).!ABC –You can sort the items in the list alpha-betically!DATE –You can sort the items in the list inorder of the dates on which the items werecreatedChanging QuickMix or stations1Turn M.C.Playing1When QuickMix or the station is selected,press M.C.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Bookmark (bookmark)1Press M.C. to store track information.Pause (pause)1Press M.C. to pause or resume.Sound Retriever (sound retriever)1Press M.C. to select the desired setting.1—2—OFF (off)OFF (off)—1—2(MIXTRAX)1is effective for low compression rates, and 2is effective for high compression rates.Audio adjustments11Audio displayShows the audio adjustment status.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select AUDIO.3 Turn M.C. to select the audio function.After selecting, perform the following proce-dures to set the audio function.Fader/Balance (fader/balance adjustment)1Press M.C. to display the setting mode.2Press M.C. to cycle between fader (front/rear)and balance (left/right).3Turn M.C. to adjust the front/rear speaker bal-ance.!The front/rear speaker balance cannot beadjusted when the rear output setting isRear SP :S/W. Refer to S/W control (rearoutput and subwoofer setting) on page 15.4Turn M.C. to adjust the left/right speaker bal-ance.Preset EQ (equalizer recall)1Press M.C. to display the setting mode.2Turn M.C. to select an equalizer curve.Powerful—Natural—Vocal—Custom1—Cus-tom2—Flat—Super bassG.EQ (equalizer adjustment)You can adjust the currently selected equalizercurve setting as desired. Adjusted equalizer curvesettings are stored in Custom1 or Custom2.!A separate Custom1 curve can be created foreach source. If you make adjustments when acurve other than Custom2 is selected, theequalizer curve settings will be stored in Cus-tom1.!ACustom2 curve that is common for all sour-ces can be created. If you make adjustmentswhen the Custom2 curve is selected, the Cus-tom2 curve will be updated.1Recall the equalizer curve you want to adjust.2Press M.C. to display the setting mode.3Press M.C. to cycle between equalizer bandand level.4Turn M.C. to select the equalizer band to ad-just.100Hz—315Hz—1.25kHz—3.15kHz—8kHzTurn M.C. to adjust the equalizer curve.+6 to –6is displayed as the equalizer curve isincreased or decreased.EnglishOperating this unit11SectionOperating this unitEn02
Loudness (loudness)Loudness compensates for deficiencies in the low-frequency and high-frequency ranges at low vol-ume.1Press M.C. to display the setting mode.2Press M.C. to turn loudness on or off.3Turn M.C. to select the desired setting.Low (low)—Mid (mid)—High (high)Subwoofer1 (subwoofer on/off setting)This unit is equipped with a subwoofer outputwhich can be turned on or off.1Press M.C. to display the setting mode.2Press M.C. to turn subwoofer output on or off.3Turn M.C. to select the phase for the sub-woofer output.Turn M.C. to the left to select reverse phase,and Reverse appears in the display. Turn M.C.to the right to select normal phase, and Nor-mal appears in the display.Subwoofer2 (subwoofer adjustment)The cut-off frequency and output level can be ad-justed when the subwoofer output is on.Only frequencies lower than those in the selectedrange are outputted from the subwoofer.1Press M.C. to display the setting mode.2Press M.C. to cycle between the cut-off fre-quency and the output level for the subwoofer.3Turn M.C. to select the cut-off frequency.50Hz—63Hz—80Hz—100Hz—125Hz4Turn M.C. to adjust the output level for the sub-woofer.The subwoofer level increases or decreaseseach time you turn M.C. +6 to –24 is displayedas the level is increased or decreased.Bass Booster (bass boost)1Press M.C. to display the setting mode.2Turn M.C. to select a desired level.0to +6 is displayed as the level is increased ordecreased.HPF (high pass filter adjustment)When you do not want low sounds from the sub-woofer output frequency range to play from thefront or rear speakers, turn on the HPF (high passfilter). Only frequencies higher than those in theselected range are output from the front or rearspeakers.1Press M.C. to display the setting mode.2Press M.C. to turn high pass filter on or off.3Turn M.C. to select the cut-off frequency.50Hz—63Hz—80Hz—100Hz—125HzSLA (source level adjustment)SLA (Source level adjustment) lets you adjust thevolume level of each source to prevent radicalchanges in volume when switching between sour-ces.!When selecting FM as the source, you cannotswitch to SLA.!Settings are based on the FM volume level,which remains unchanged.!The AM volume level can also be adjusted withthis function.1Press M.C. to display the setting mode.2Turn M.C. to adjust the source volume.Adjustment range: +4 to –4Using Bluetooth wirelesstechnology!Only for DEH-P8400BHUsing Bluetooth telephoneImportant!Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using it without the engine run-ning can drain the battery power.!Operations may vary depending on the kindof cellular phone.!Advanced operations that require attentionsuch as dialing numbers on the monitor,using the phone book, etc., are prohibitedwhile driving. Park your vehicle in a safeplace when using these advanced opera-tions.Setting up for hands-free phoningBefore you can use the hands-free phoningfunction you must set up the unit for use withyour cellular phone.1ConnectionOperate the Bluetooth telephone connectionmenu. Refer to Connection menu operation onthis page.2Function settingsOperate the Bluetooth telephone functionmenu. Refer to Phone menu operation on page14.Basic operationsMaking a phone call!Refer to Phone menu operation on page 14.Answering an incoming call1When a call is received, press M.C.Ending a call1Press PHONE.Rejecting an incoming call1When a call is received, press PHONE.Answering a call waiting1When a call is received, press M.C.Switching between callers on hold1Press M.C.Canceling call waiting1Press PHONE.Adjusting the other party’s listening volume1Turn LEVER while talking on the phone.!When private mode is on, this function is notavailable.Turning private mode on or off1Press BAND/while talking on the phone.Switching the information display1Press /DISP while talking on the phone.Notes!If private mode is selected on the cellularphone, hands-free phoning may not be avail-able.!The estimated call time appears in the dis-play (this may differ slightly from the actualcall time).Connection menu operationImportant!Be sure to park your vehicle in a safe placeand apply the parking brake when perform-ing this operation.!Connected devices may not operate properlyif more than one Bluetooth device is con-nected at a time (e.g. a phone and a separateaudio player are connected simultaneously).1 Press and hold PHONE to display the con-nection menu.#You cannot operate this step during a call.2 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Operating this unit12SectionOperating this unitEn02
Device list (connecting or disconnecting a devicefrom the device list)!When no device is selected in the device list,this function is not available.1Press M.C. to display the setting mode.2Turn M.C. to select the name of a device youwant to connect/disconnect.!Press and hold M.C. to switch theBluetooth device address and devicename.3Press M.C. to connect/disconnect the selecteddevice.Once the connection is established, Con-nected is displayed.Delete device (deleting a device from the devicelist)!When no device is selected in the device list,this function is not available.1Press M.C. to display the setting mode.2Turn M.C. to select the name of a device youwant to delete.!Press and hold M.C. to switch theBluetooth device address and devicename.3Press M.C. to display Delete YES.4Press M.C. to delete a device information fromthe device list.!While this function is in use, do not turn offthe engine.Add device (connecting a new device)1Press M.C. to start searching.!To cancel, press M.C. while searching.!If this unit fails to find any available cellularphones, Not found is displayed.2Turn M.C. to select a device from the devicelist.!Press and hold M.C. to switch theBluetooth device address and devicename.3Press M.C. to connect the selected device.!To complete the connection, check the de-vice name (Pioneer BT Unit). Enter thePIN code on your device if necessary.!PIN code is set to 0000 as the default. Youcan change this code.!6-digit number appears on the display ofthis unit. Once the connection is estab-lished, this number disappears.!If you are unable to complete the connec-tion using this unit, use the device to con-nect to the unit.!If three devices are already paired, DeviceFull is displayed and it is not possible toperform this operation. In this case, deletea paired device first.Special device (setting a special device)Bluetooth devices that are difficult to establish aconnection with are called special devices. If yourBluetooth device is listed as a special device, se-lect the appropriate one.1Press M.C. to display the setting mode.!If three devices are already paired, DeviceFull is displayed and it is not possible toperform this operation. In this case, deletea paired device first.2Turn M.C. to display a special device. Press toselect.3Turn M.C. to display this unit’s device name,Bluetooth device address and PIN code.4Use a device to connect to this unit.!To complete the connection, check the de-vice name (Pioneer BT Unit) and enter thePIN code on your device.!PIN code is set to 0000 as the default. Youcan change this code.Auto connect (connecting to a Bluetooth deviceautomatically)1Press M.C. to turn automatic connection on oroff.Visibility (setting the visibility of this unit)To check the availability of this unit from other de-vices, Bluetooth visibility of this unit can be turnedon.1Press M.C. to turn the visibility of this unit onor off.!While setting Special device, Bluetoothvisibility of this unit is turned on tempora-rily.Pin code input (PIN code input)To connect your device to this unit via Bluetoothwireless technology, you need to enter a PIN codeon your device to verify the connection. The defaultcode is 0000, but you can change it with this func-tion.1Press M.C. to display the setting mode.2Turn M.C. to select a number.3Press M.C. to move the cursor to the next posi-tion.4After inputting PIN code, press and hold M.C.!After inputting, pressing M.C. returns youto the PIN code input display, and you canchange the PIN code.Device INFO (Bluetooth device address display)1Press M.C. to display the setting mode.2Turn M.C. left to switch to the Bluetooth deviceaddress.Turning M.C. right returns to the device name.Bluetooth Audio!Only for DEH-P8400BHImportant!Depending on the Bluetooth audio playerconnected to this unit, the available opera-tions will be limited to the following two lev-els:—A2DP profile (Advanced Audio DistributionProfile): You can only playback songs on youraudio player.—AVRCP profile (Audio/Video Remote ControlProfile): You can perform playback, pauseplayback, select songs, etc.!Since there are a number of Bluetooth audioplayers available on the market, available op-erations will vary extensively. When operatingyour player with this unit, refer to the instruc-tion manual that came with your Bluetoothaudio player as well as this manual.EnglishOperating this unit13SectionOperating this unitEn02
!Information related to a song (such as theelapsed playing time, song title, song index,etc.) cannot be displayed on this unit.!As the signal from your cellular phone maycause noise, avoid using it when you are lis-tening to songs on your Bluetooth audioplayer.!When a call is in progress on the cellularphone connected to this unit via Bluetoothwireless technology, the sound of theBluetooth audio player connected to this unitis muted.!When the Bluetooth audio player is in use,you cannot connect to a Bluetooth telephoneautomatically.!Playback continues even if you switch fromyour Bluetooth audio player to anothersource while listening to a song.Setting up for Bluetooth audioBefore you can use the Bluetooth audio functionyou must set up the unit for use with yourBluetooth audio player. This entails establishinga Bluetooth wireless connection between thisunit and your Bluetooth audio player, and pair-ing your Bluetooth audio player with this unit.Basic operations11Device nameShows the device name of the connectedBluetooth audio player.Fast forwarding or reversing1Turn and hold down LEVER to the right or left.Selecting a track1Turn LEVER.Starting playback1Press BAND/.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Play (play)1Press M.C. to start playback.Stop (stop)1Press M.C. to stop the playback.Pause (pause)1Press M.C. to turn pause on.Phone menu operation!Only for DEH-P8400BHImportantBe sure to park your vehicle in a safe place andapply the parking brake when performing thisoperation.1 Press PHONE to display the phone menu.2 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Missed calls (missed call history)Dialed calls (dialed call history)Received calls (received call history)1Press M.C. to display the phone number list.2Turn M.C. to select a name or phone number.3Press M.C. to make a call.!To display details about the contact you se-lected, press and hold M.C.PhoneBook (phone book)!The phone book in your cellular phone will betransferred automatically when the phone isconnected to this unit.!Depending on the cellular phone, the phonebook may not be transferred automatically. Inthis case, operate your cellular phone to trans-fer the phone book. The visibility of this unitshould be on. Refer to Visibility (setting thevisibility of this unit) on the previous page.1Press M.C. to display SEARCH (alphabeticallist).2Turn M.C. to select the first letter of the nameyou are looking for.!Press and hold M.C. to select the desiredcharacter type.3Press M.C. to display a registered name list.4Turn M.C. to select the name you are lookingfor.5Press M.C. to display the phone number list.6Turn M.C. to select a phone number you wantto call.7Press M.C. to make a call.Phone Function (phone function)You can set Auto answer,Ring tone and PH.B.Name view from this menu. For details, refer toFunction and operation on this page.Function and operation1 Display Phone Function.Refer to Phone Function (phone function) onthis page.2 Press M.C. to display the function menu.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Auto answer (automatic answering)1Press M.C. to turn automatic answering on oroff.Ring tone (ring tone select)1Press M.C. to turn the ring tone on or off.PH.B.Name view (phone book name view)1Press M.C. to switch between the lists ofnames.Initial settings11Function display!Shows the function status.1 Press and hold SRC/OFF until the unitturns off.2 Press M.C. and hold until the initial set-ting menu appears in the display.Operating this unit14SectionOperating this unitEn02
3 Turn M.C. to select the initial setting.After selecting, perform the following proce-dures to set the initial setting.Language select (multi-language)For your convenience, this unit equips multiplelanguage display. You can select the languagebest suited to your first language.1Press M.C. to select the language.English—Français—EspañolCalendar (setting the date)1Press M.C. to select the segment of the calen-dar display you wish to set.Year—Day—Month2Turn M.C. to set the date.Clock (setting the clock)1Press M.C. to select the segment of the clockdisplay you wish to set.Hour—Minute2Turn M.C. to adjust the clock.EngineTime alert (elapsed time display setting)This setting allows you to measure the length oftime that elapses from when the machine isturned on and display the amount of elapsed timeper set period.Also, you will hear alarm.1Press M.C. to select your favorite setting.OFF—15Minutes—30MinutesUSB plug&play (plug and play)This setting allows you to switch your source toUSB/iPod/Pandora automatically.1Press M.C. to turn the plug and play functionon or off.!ON –When a USB storage device/iPod isconnected, depending on the type of de-vice, the source is automatically switchedto USB/iPod/Pandora when you turn onthe engine. If you disconnect your USBstorage device/iPod, this unit’s source isturned off.!OFF –When USB storage device/iPod isconnected, the source is not switched toUSB/iPod/Pandora automatically. Pleasechange the source to USB/iPod/Pandoramanually.Warning tone (warning tone setting)If the front panel is not detached from the headunit within four seconds of turning off the ignition,a warning tone sounds. You can turn off the warn-ing tone.1Press M.C. to turn the warning tone on or off.AUX1/AUX2 (auxiliary input setting)Activate this setting when using an auxiliary de-vice connected to this unit.1Press M.C. to turn auxiliary setting on or off.Dimmer (dimmer setting)To prevent the display from being too bright atnight, the display is automatically dimmed whenthe car’s headlights are turned on. You can turnthe dimmer on or off.1Press M.C. to turn dimmer on or off.Contrast (display contrast setting)1Turn M.C. to adjust the contrast level.0to 15 is displayed as the level is increased ordecreased.S/W control (rear output and subwoofer setting)This unit’s rear output (rear speaker leads outputand RCA rear output) can be used for full-rangespeaker (Rear SP :F.Range) or subwoofer (RearSP :S/W) connection. If you switch the rear outputsetting to Rear SP :S/W, you can connect a rearspeaker lead directly to a subwoofer without usingan auxiliary amp.1Press M.C. to switch the rear output setting.!When no subwoofer is connected to therear output, select Rear SP :F.Range (full-range speaker).!When a subwoofer is connected to the rearoutput, select Rear SP :S/W (subwoofer).!Even if you change this setting, there will beno output unless you turn the subwoofer out-put on (refer to Subwoofer1 (subwoofer on/offsetting) on page 12).!If you change this setting, subwoofer output inthe audio menu will return to the factory set-tings.!Both rear speaker lead outputs and RCA rearoutput are switched simultaneously in this set-ting.Demonstration (demo display setting)1Press M.C. to turn the demo display on or off.Ever-scroll (scroll mode setting)When ever scroll is set to ON, recorded text infor-mation scrolls continuously in the display. Set toOFF if you prefer the information to scroll justonce.1Press M.C. to turn the ever scroll on or off.BT AUDIO (Bluetooth audio activation)!This function is available on the DEH-P7400HDonly when a Bluetooth adapter (e.g. CD-BTB200)is connected to the device.You need to activate the BT Audio source in orderto use a Bluetooth audio player.1Press M.C. to turn the BT Audio source on oroff.Clear memory (resetting the Bluetooth wirelesstechnology module)!This function is not available for DEH-P7400HD.Bluetooth device data can be deleted. To protectpersonal information, we recommend deletingthis data before transferring the unit to other per-sons. The following settings will be deleted.!phone book entries on the Bluetooth tele-phone!preset numbers on the Bluetooth telephone!registration assignment of the Bluetooth tele-phone!call history of the Bluetooth telephone!information of the connected Bluetooth tele-phone!PIN code of the Bluetooth device1Press M.C. to show the confirmation display.YES is displayed. Clearing memory is now onstandby.If you do not want to reset phone memory, turnM.C. to display CANCEL and press to select.2Press M.C. to clear the memory.Cleared is displayed and the settings are de-leted.!While this function is in use, do not turnoff the engine.Pin code input (PIN code input)EnglishOperating this unit15SectionOperating this unitEn02
!This function is not available for DEH-P8400BH.To connect your cellular phone to this unit viaBluetooth wireless technology, you need to enter aPIN code on your phone to verify the connection.The default code is 0000, but you can change itwith this function.With some Bluetooth audio players, you may berequired to enter the Bluetooth audio player PINcode in advance to set this unit for a connection.!You can only operate this function whenBluetooth adapter (e.g. CD-BTB200) is con-nected to this unit.1Turn M.C. to select a number.2Press M.C. to move the cursor to the previousor next position.3After entering the PIN code (up to eight digits),press and hold down M.C.The PIN code can be stored in the memory.!Pressing M.C. again on the same displayreturns you to the PIN code input display toallow you to change the PIN code.BT Version info. (Bluetooth version display)!This function is available on the DEH-P7400HDonly when a Bluetooth adapter (e.g. CD-BTB200)is connected to the device.You can display the system versions of this unitand of Bluetooth module.1Press M.C. to display the information.!Turning M.C. or LEVER cycles between thesystem version of this unit and that of theBluetooth module.S/W UPDATE (updating the software)!This function is not available for DEH-P7400HD.This function is used to update this unit with thelatest software. For information on the softwareand updating, refer to our website.!Never turn the unit off while the software isbeing updated.1Press M.C. to display the data transfer mode.Follow the on-screen instructions to finish up-dating the software.Other functionsUsing an AUX sourceUp to two auxiliary devices such as VCR or port-able devices (sold separately) can be connectedto this unit. When connected, auxiliary devicesare automatically read as AUX sources and as-signed to AUX1 or AUX2. The relationship be-tween AUX1 and AUX2 sources is explainedbelow.About AUX1 and AUX2There are two methods to connect auxiliary devi-ces to this unit.AUX1 source:When connecting auxiliary device using a stereomini plug cable%Insert the stereo mini plug into the AUXinput jack.For more details, refer to the installation man-ual.This auxiliary device is automatically set toAUX1.AUX2 source:When connecting an auxiliary device using an IP-BUS-RCA Interconnector (sold separately)%Use an IP-BUS-RCA Interconnector suchas the CD-RB20/CD-RB10 (sold separately) toconnect this unit to an auxiliary device fea-turing RCA output.For more details, refer to the IP-BUS-RCA Inter-connector owner’s manual.This auxiliary device is automatically set toAUX2.#This type of connection can only be made if theauxiliary device has RCA outputs.Selecting AUX as the source%Press SRC/OFF to select AUX as thesource.#AUX cannot be selected unless the auxiliary set-ting is turned on. For more details, refer to AUX1/AUX2 (auxiliary input setting) on the previous page.Using an external unitAn external unit refers to a Pioneer product,such as those which will be available in the fu-ture. Although incompatible as a source, thebasic functions of up to two external units canbe controlled with this unit. When two externalunits are connected, the external units are auto-matically allocated to external unit 1 or externalunit 2.The basic operations of the external unit are ex-plained below. The allocated functions will differdepending on the connected external unit. Fordetails concerning these functions, refer to theowner’s manual for the external unit.Selecting the external unit as the source%Press SRC/OFF to select EXT as the source.Basic operationsThe functions allocated to the following opera-tions will differ depending on the connected ex-ternal unit. For details concerning thesefunctions, refer to the owner’s manual for theconnected external unit.%Press BAND/ .%Press and hold BAND/ .%Turn LEVER.%Turn and hold down LEVER.%Press or .Using the functions allocated to 1 to6 keys1 Press (list).2 Use M.C. to select Key 1 to Key 6.Turn to change Key 1 to Key 6 and press.Advanced operations1 Press M.C. to display the main menu.2 Use M.C. to select FUNCTION.Turn to change the menu option. Press to select.3 Turn M.C. to select the function.Function1 (function 1)—Function2 (function 2)—Function3 (function 3)—Function4 (function4)—Auto/Manual (auto/manual)4 Press M.C. to select the desired setting.Using different entertainmentdisplaysYou can enjoy entertainment displays while lis-tening to each sound source.Operating this unit16SectionOperating this unitEn02
Advanced operations using the MIX(MIXTRAX) buttonMIXTRAX technology is used to add a variety ofsound effects between songs for arranging thepauses between songs. It allows you to enjoy lis-tening to music nonstop.Connecting the currently playing song and thenext song together with sound effects1Press MIX to turn the MIXTRAX function on oroff.!This function is available only when a file on aUSB storage device or a song on an iPod isbeing played.!This function is not available when the controlmode is set to iPod/APP.!Depending on the file/song, sound effects maynot be enabled for adding.!When the MIXTRAX function is turned on, theSound Retriever setting is turned off. Refer toSound Retriever (sound retriever) on page 10.NoteMIXTRAX includes a MIXTRAX Illumination fea-ture that when switched on changes the illumi-nated colors in time with the audio track. If youfind the feature distracting while driving, pleasereturn MIXTRAX Illumination to the default set-ting of “OFF”.Switching the display backgroundaccording to the type of musicThis function is available only when the MIX-TRAX function is on. Refer to Connecting the cur-rently playing song and the next song togetherwith sound effects on this page.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ENTERTAINMENT.3 Turn M.C. to select the function.4 Press M.C. to display the MIXTRAX.5 Turn M.C. to change the display.MIXTRAX—OFF!When MIXTRAX is selected, the illuminationcolors selected in Flashing Color are dis-played.!When OFF is selected, the illumination colorselected for the Background is displayed.Switching the display indication1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ENTERTAINMENT.3 Turn M.C. to select the function.4 Press M.C. to display the Background.5 Turn M.C. to change the display.Background visual—genre—background pic-ture 1—background picture 2—background pic-ture 3—background picture 4—simple display—movie screen —calendar#Genre display changes depending on the genreof music.#Genre display may not operate correctly depend-ing on the application used to encode audio files.Turning the clock display on or off1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ENTERTAINMENT.3 Turn M.C. to select the function.4 Press M.C. to select the desired setting.Clock display—elapsed time display—clock off#You can switch the function by pressing CLOCK(DEH-P7400HD only).Selecting the illumination colorThis unit is equipped with multiple-color illumi-nation. You can select desired colors for the keysand display of this unit. You also can customizethe colors you want to use.Selecting the flashing color from theillumination color listYou can change colors for the keys and displayof this unit according to the type of music.!This function is available only when the MIX-TRAX function is on. Refer to Connecting thecurrently playing song and the next song to-gether with sound effects on this page.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ILLUMI.3 Turn M.C. to display Flashing Color andpress to select.4 Turn M.C. to select the illumination color.You can select one option from the following list.!Changing the color according to the type ofmusic played (You can select from Color 1 toColor 6 and Random.)!Changing the color according to the level oflow sounds played (You can select fromColor 1 to Color 6 and Random.)!OFF (No change.)Selecting the key color from theillumination color listYou can select desired colors for the keys of thisunit.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ILLUMI.3 Turn M.C. to display Key and press to se-lect.4 Turn M.C. to select the illumination color.You can select one option from the following list.!30 preset colors (WHITE to ROSE)!SCAN (cycle through all colors)!3 sets of colors (WARM,AMBIENT,CALM)!CUSTOM (customized illumination color)Notes!When SCAN is selected, the system auto-matically cycles through the 30 preset colors.!When WARM is selected, the system auto-matically cycles through the warm colors.!When AMBIENT is selected, the system au-tomatically cycles through the ambient col-ors.!When CALM is selected, the system auto-matically cycles through the calm colors.!When CUSTOM is selected, the customizedcolor saved is selected.Selecting the display color from theillumination color listYou can select the desired colors for the displayof this unit.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ILLUMI.3 Turn M.C. to switch to Display and pressto select.4 Turn M.C. to select the illumination color.You can select one option from the following list.!30 preset colors (WHITE to ROSE)!SCAN (cycle through all colors)EnglishOperating this unit17SectionOperating this unitEn02
!3 sets of colors (WARM,AMBIENT,CALM)!CUSTOM (customized illumination color)NoteFor details about colors on the list, refer to Se-lecting the key color from the illumination colorlist on the previous page.Selecting key and display color fromthe illumination color listYou can select the desired colors for the keysand display of this unit.1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ILLUMI.3 Turn M.C. to display Key & Display andpress to select.4 Turn M.C. to select the illumination color.You can select one option from the following list.!30 preset colors (WHITE to ROSE)!SCAN (cycle through all colors)!3 sets of colors (WARM,AMBIENT,CALM)Notes!You cannot select CUSTOM in this function.!Once you select a color in this function, col-ors on the keys and display of this unit auto-matically switch to the color you selected.!For details about colors on the list, refer toSelecting the key color from the illuminationcolor list on the previous page.Customizing the illumination color1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select ILLUMI.3 Turn M.C. to display Key or Display. Pressto select.4 Press M.C. and hold until the customizingillumination color setting appears in the dis-play.5 Press M.C. to select the primary color.R(red)—G(green)—B(blue)6 Turn M.C. to adjust the brightness level.Adjustment range: 0to 60#You cannot select a level below 10 for all three ofR(red), G(green), and B(blue) at the same time.#You can also perform the same operation onother colors.Notes!You cannot create a custom illuminationcolor when SCAN or a set of colors (WARM,AMBIENT,orCALM) is selected.!You can create custom illumination colorsfor both Key and Display.Switching the display indicationand button illuminationDisplay indication and button illumination canbe switched on or off.%Press and hold MIX.Pressing and holding MIX switches the displayindication and button illumination on or off.#Even if the display indication is turned off, opera-tion can be conducted. If operation is conductedwhile the display indication is off, display will lightup for a few seconds and then turn off again.Bluetooth Audio!Only for DEH-P7400HDIf you connect a Bluetooth adapter (e.g. CD-BTB200) to this unit, you can control Bluetoothaudio players via Bluetooth wireless technology.!In some countries, CD-BTB200 is not sold onthe market.Important!Depending on the Bluetooth audio playerconnected to this unit, the available opera-tions will be limited to the following two lev-els:—A2DP profile (Advanced Audio DistributionProfile): You can only playback songs on youraudio player.—AVRCP profile (Audio/Video Remote ControlProfile): You can perform playback, pauseplayback, select songs, etc.!Operations may vary depending on the kindof a Bluetooth audio player.!Refer to the instruction manual that camewith your Bluetooth audio player as well asthis manual while operating your player onthis unit.!Information related to a song (such as theelapsed playing time, song title, song index,etc.) cannot be displayed on this unit.!As the signal from your cellular phone maycause noise, avoid using it when you are lis-tening to songs on your Bluetooth audioplayer.!When a call is in progress on the cellularphone connected to this unit via Bluetoothwireless technology, the sound of theBluetooth audio player connected to this unitis muted.!Playback continues even if you switch fromyour Bluetooth audio player to anothersource while listening to a song.Basic operations11Device nameShows the device name of the connectedBluetooth audio player (or Bluetooth adapt-er).Selecting a track1Turn LEVER.Fast forwarding or reversing1Turn and hold down LEVER to the right or left.Notes!For details concerning operation, refer to theBluetooth adapter’s operation manual.!Even though your audio player does not con-tain a Bluetooth module, you can still controlit from this unit via Bluetooth wireless tech-nology. To control your audio player usingthis unit, connect a product featuringBluetooth wireless technology (available onthe market) to your audio player and connectthe Bluetooth adapter (e.g. CD-BTB200) tothis unit.Function settings1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Operating this unit18SectionAvailable accessoriesEn0203
Connection open (Bluetooth audio player con-nection)!This function cannot be operated when aBluetooth audio player has already been con-nected.1Press M.C. to open the connection.Always waiting is displayed. This unit is nowon standby for connection from Bluetoothaudio player.!If your Bluetooth audio player is set readyfor Bluetooth wireless connection, connec-tion to this unit is automatically estab-lished.!If your player requires a PIN code to estab-lish a connection, look for the code on theplayer or in its accompanying documenta-tion. Refer to Pin code input (PIN codeinput) on page 15.Disconnect audio (Bluetooth audio player discon-nection)!This function cannot be operated when aBluetooth audio player is not connected.1Press M.C. to disconnect the Bluetooth audioplayer.Disconnected is displayed. The Bluetoothaudio player is now disconnected from thisunit.Play (song playback)!This function cannot be operated when aBluetooth audio player is not connected.!This function cannot be operated when aBluetooth audio player is connected via A2DP.1Press M.C. to start playback.Stop (stop playback)!This function cannot be operated when aBluetooth audio player is not connected.!This function cannot be operated when aBluetooth audio player is connected via A2DP.1Press M.C. to stop the playback.Pause (pause)!This function cannot be operated when aBluetooth audio player is not connected.!This function cannot be operated when aBluetooth audio player is connected via A2DP.1Press M.C. to pause or resume.Device info. (Bluetooth device address display)1Press M.C. to display the information.!Pressing M.C. toggles Bluetooth deviceand address display on/off.Bluetooth telephone!Only for DEH-P7400HDIf you use a Bluetooth adapter (e.g. CD-BTB200),you can connect a cellular phone featuringBluetooth wireless technology to this unit forhands-free, wireless calls, even while driving.!In some countries, CD-BTB200 is not sold onthe market.Basic operations6 851 37241Device nameShows the device name of the cellularphone.2Signal level indicator!The level shown on the indicator may dif-fer from the actual signal level.3User number indicator4Battery strength indicator!The level shown on the indicator may dif-fer from the actual battery strength.!If the battery strength is not available,nothing is displayed in the batterystrength indicator area.5Calendar displayShows the day, month and year (if connectedwith a phone).6Clock displayShows the time (if connected with a phone).7Automatic answering/Automatic rejecting in-dicatorShows AUTO when the automatic answeringfunction is on (for more details, refer toAuto answer (automatic answering) on page22).Shows REFUSE when the automatic rejectingfunction is on (for more details, refer toRefuse calls (automatic rejecting) on page22).8Incoming call noticeIndicates that an incoming call has been re-ceived and has not been checked yet.!Not displayed for calls made when yourcellular phone is disconnected from thisunit.Important!Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using it without the engine run-ning can drain the battery power.!Advanced operations that require attentionsuch as dialing numbers on the monitor,using the phone book, etc., are prohibitedwhile driving. Park your vehicle in a safeplace when using these advanced opera-tions.Notes!The equalizer curve for the phone source isfixed.!When selecting the phone source, you canonly operate Fader/Balance (balance adjust-ment) in the audio menu.Setting up for hands-free phoningBefore you can use the hands-free phoningfunction you must set up the unit for use withyour cellular phone. This entails establishing aBluetooth wireless connection between this unitand your phone, registering your phone withthis unit, and adjusting the volume level.EnglishAvailable accessories19SectionAvailable accessoriesEn03
1ConnectionFor detailed instructions on connecting yourphone to this unit via Bluetooth wireless tech-nology, see following section. Function and op-eration on this page.!To make best use of the technology, we rec-ommend you register the phone to thisunit.2RegistrationTo register your temporarily connected phone,refer to Set phone (registering a connected cel-lular phone) on the next page.3Volume adjustmentAdjust the earpiece volume of your cellularphone to your preference. The unit will recordthe adjusted volume level as the default set-ting.!The volume of the caller’s voice and ringtone may vary depending on the type ofcellular phone.!If there is a large volume difference be-tween the ring tone and caller’s voice, theoverall volume level may become unstable.!Make sure to adjust the volume to a properlevel before disconnecting the cellularphone from the unit. If the volume ismuted (zero level) on your cellular phone,the volume level of your cellular phone re-mains muted even after the cellular phoneis disconnected.Making a phone callVoice recognition1Press BAND/and hold until Voice dial ap-pears in the display.Voice dial appears in the display. When Voicedial ON is displayed, voice recognition func-tion is now ready.!If your cellular phone does not featurevoice recognition function, No voice dialappears in the display and operation is notpossible.2Say the name of your contact aloud.Taking a phone callAnswering or rejecting an incoming callAnswering an incoming call1When a call is received, press M.C.!You can also operate this function by turn-ing LEVER to the right.Ending a call1Turn LEVER to the left.Rejecting an incoming call1When you receive a call, turn LEVER to theleft.Notes!If private mode is selected on the cellularphone, hands-free phoning may not be avail-able.!The estimated call time appears in the dis-play (this may differ slightly from the actualcall time).Operating a call waitingAnswering a call waiting1When a call is received, press M.C.!You can also operate this function by turn-ing LEVER to the right.Ending all calls1Turn LEVER to the left.Switching between callers on hold1Press M.C.!You can also operate this function by turn-ing LEVER to the right.Canceling call waiting1Turn LEVER to the left.Notes!Turn LEVER left to end all calls includingcalls waiting on the line.!To end the call, both you and the other callermust hang up your phones.Function and operation1 Press M.C. to display the main menu.2 Turn M.C. to change the menu optionand press to select FUNCTION.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Search&Connect (searching for available cellularphone)!This function cannot be operated when a cellu-lar phone is connected.1Press M.C. to select the function.2Press M.C. to search for available cellularphones.While searching, Searching flashes. Whenavailable cellular phones featuring Bluetoothwireless technology are found, device name orName not found (if names cannot be ob-tained) is displayed.!If this unit fails to find any available cellularphones, Not found is displayed.3Turn M.C. to select the name of the device youwant to connect.4Press M.C. to connect the selected cellularphone.While connecting, Connecting flashes. Tocomplete the connection, check the devicename (Pioneer BT Unit) and enter the linkcode on your cellular phone. If the connectionis established, Connected is displayed.!PIN code is set to 0000 as the default. Youcan change this code. Refer toPin code input (PIN code input) on page15.Connection open (connecting from cellularphone)!This function cannot be operated when a cellu-lar phone is connected.1Press M.C. to open the connection.Disconnect phone (disconnecting a cellularphone)Available accessories20SectionAvailable accessoriesEn03
!This function cannot be operated when the cel-lular phone is not connected.1Press M.C. to disconnect a cellular phonefrom this unit.After disconnection is completed, Discon-nected is displayed.Connect phone (connecting a registered cellularphone)!This function cannot be operated when a cellu-lar phone is connected.1Press M.C. to select the function.2Turn M.C. to select a pairing assignment.P1 (user phone 1)—P2 (user phone 2)—P3(user phone 3)—G1 (guest phone 1)—G2(guest phone 2)!If the assignment is empty, No data is dis-played and operation is not possible.3Press M.C. to connect the selected cellularphone.While connecting, Connecting is displayed.After the connection is completed, Connectedis displayed.Set phone (registering a connected cellularphone)!This function cannot be operated when the cel-lular phone is not connected or already con-nected and registered.1Press M.C. to select the function.2Turn M.C. to select a pairing assignment.P1 (user phone 1)—P2 (user phone 2)—P3(user phone 3)—G1 (guest phone 1)—G2(guest phone 2)!As you select each assignment, you cansee whether or not a phone is already regis-tered. If the assignment is empty, No datais displayed. If the assignment is alreadytaken, the device name appears. To replacean assignment with a new phone, first de-lete the current assignment. Refer toDelete device (deleting a registered cellularphone).3Press M.C. to register the currently connectedphone.When registration is completed, Reg.Com-pleted is displayed.!If the registration fails, Reg.ERROR is dis-played. In this case, return to step 1 and tryagain.Delete device (deleting a registered cellularphone)1Press M.C. to select the function.2Turn M.C. to select a pairing assignment.P1 (user phone 1)—P2 (user phone 2)—P3(user phone 3)—G1 (guest phone 1)—G2(guest phone 2)!If the assignment is empty, No data is dis-played and operation is not possible.3Select the desired pairing assignment andpress M.C.Delete YES is displayed. Deleting phone isnow on standby.4Press M.C. to delete the phone.After the phone is deleted, Deleted is dis-played.PH.B.Transfer (transferring entries to the phonebook)The Phone Book can hold a total of 500 entries.300 from User 1, 150 from User 2, and 50 fromUser 3.1Press M.C. to enter the phone book transferstandby mode.Transfer YES appears in the display.2Press M.C. to show the confirmation display.Transfer -/- appears in the display.3Use the cellular phone to perform phone booktransfer.Perform phone book transfer using the cellularphone. For detailed instructions, refer to the in-struction manual that came with your cellularphone.!The display indicates how many entrieshave been transferred and the total numberto be transferred.4Data transferred is displayed and phone booktransfer is completed.PH.B.Name view (changing the phone book dis-play order)!This function cannot be operated when the cel-lular phone is not connected or not registered.!This function cannot be operated when theregistered guest phone is used.!This function cannot be operated when aBluetooth telephone is connected via HSP(head set profile).1Press M.C. to change the name view order.Inverted is displayed and the name view orderis changed.Pressing M.C. repeatedly changes the nameview order between first and last name.Clear memory (clearing memory)!This function cannot be operated when the cel-lular phone is not connected or not registered.!This function cannot be operated when aBluetooth telephone is connected via HSP(head set profile).1Press M.C. to select the function.2Turn M.C. to select an item.PhoneBook (phone book)—Missed calls(missed call history)—Dialed calls (dialledcall history)—Received calls (received call his-tory)—Dial preset (preset phone numbers)—All clear (delete all memory)!If you want to clear all the Phone Book, di-alled/received/missed call history list andpreset phone number, select All clear.!If guest phone is connected to this unit viaBluetooth wireless technology, Phone-Book cannot be selected.3Press M.C. to the right to select the item thatyou want to delete from this unit.Clear memory YES is displayed. Clearingmemory is now on standby.4Press M.C. to clear the memory.Cleared is displayed and data on the selecteditem is cleared from this unit’s memory.Number dial (making a call by entering phonenumber)EnglishAvailable accessories21SectionAvailable accessoriesEn03
!This function cannot be operated when the cel-lular phone is not connected.!This function cannot be operated when aBluetooth telephone is connected via HSP(head set profile).!Be sure to park your vehicle in a safe placeand apply the parking brake when performingthis operation.1Press M.C. to select the function.2Turn M.C. to select a number.3Press M.C. to move the cursor to the previousor next position.Up to 24 digits can be entered.4When you finish entering the number, pressM.C.5Press M.C. to make a call.6To end the call, turn LEVER to the left.Refuse calls (automatic rejecting)!This function cannot be operated when aBluetooth telephone is connected via HSP(head set profile).1Press M.C. to turn automatic call rejection onor off.Auto answer (automatic answering)1Press M.C. to turn automatic answering on oroff.Ring tone (ring tone select)1Press M.C. to turn the ring tone on or off.Auto connect (automatic connection to a phone)1Press M.C. to turn automatic connection on oroff.If your cellular phone is ready for Bluetoothwireless connection, connection to this unit isautomatically established.Echo cancel (echo cancel and noise reduction)1Press M.C. to turn echo canceling on or off.Device info. (Bluetooth device address display)1Press M.C. to select the function.2Press M.C. to display the information.!Pressing M.C. toggles Bluetooth device ad-dress and device name on/off.Using the phone bookImportantBe sure to park your vehicle in a safe place andapply the parking brake when performing thisoperation.After finding the number you want to call in thephone book, you can select the entry and makethe call.1 Press (list) to display the Phone Book.Phone book—Missed call—Dialled call—Re-ceived call2 Turn M.C. to select the first letter of thename you are looking for.3 Press M.C. to display entries.The first three Phone Book entries starting withthat letter (e.g. “Ben”,“Brian”and “Burt”when“B”is selected) will be displayed.4 Turn M.C. to select a phone book entryyou want to call.5 Press M.C. to display the detailed list forthe selected entry.The phone number, name and genre (if as-signed) of entries are displayed in the detailedlist.#If several phone numbers are included in anentry, select one by turning M.C.#Turn M.C. if you want to go back and select an-other entry.6 Use M.C. to control the following func-tions.Perform the following procedures to set thefunction.Calling a number in the phone book1Press M.C. to make a call.2To end the call, turn LEVER to the left.Editing phone numbersYou can edit the numbers of Phone Book entries.Each phone number can be up to 24 digits long.1Press and hold M.C. to display the numberinput screen.2Turn M.C. to move the cursor to the numberyou want to change.3Turn and hold down M.C. to change numbers.4Press M.C. to store the new number.Clearing a phone book entry1Press and hold M.C. to display the numberinput screen.2Turn M.C. to switch to the clear memoryscreen.Edit number (number input screen)—Clearmemory (clear memory screen)3Press M.C. to pull up the confirmation display.Clear memory YES is displayed.4Press M.C. to delete the Phone Book entry.Cleared is displayed.The Phone Book entry is deleted. The displayreturns to Phone Book entry list.Using the call historyImportantBe sure to park your vehicle in a safe place andapply the parking brake when performing thisoperation.The 12 most recent calls made (dialled), receivedand missed, are stored in the call history. Youcan browse the call history and call numbersfrom it.1 Press (list) to display the list.Phone book—Missed call—Dialled call—Re-ceived call#If no phone numbers are stored in the selectedlist, No data is displayed.2 Turn M.C. to select a phone number.Turning M.C. to change the phone numbersstored in the list.#If the phone number is already in the phonebook, the corresponding name is displayed.3 Press M.C. to display the detailed list.Name and phone number are displayed in thedetailed list.#If the number is already in the Phone Book thenthe name is also displayed.#Turning M.C. switches to the previous or nextphone number displayed in the detailed list.4 Press M.C. to make a call.#For an international call, press and hold M.C. toadd +to the phone number.5 To end the call, turn LEVER to the left.XM tunerYou can use this unit to control an XM satellitedigital tuner (GEX-P920XM), which is sold sepa-rately.!With this unit, you can operate two additionalfunctions: XM channel direct selection andpreset channel list.Available accessories22SectionAvailable accessoriesEn03
For details concerning operation, refer to the XMtuner’s operation manuals. This section pro-vides information on XM operations with thisunit which differs from that described in the XMtuner’s operation manual.Basic operations2 31 451XM band indicator2XM channel number indicator3XM preset number indicator4XM channel select setting indicatorShows what channel select setting has beenselected. CH is displayed whenChannel number is selected, and CAT is dis-played when Category is selected.5XM text informationShows the text information of broadcastchannel.Select an XM band.1Press BAND/.!Band can be selected from XM-1,XM-2 orXM-3.Select a channel.1Turn LEVER.!By turning and holding down LEVER, youcan increase or decrease the channelnumber continuously.!You can also perform tuning from a de-sired channel category. (Refer to Selectinga channel from a channel category on thispage.)Switching the XM display1Press /DISP.Storing and recalling broadcaststationsYou can easily store up to six stations for eachband as presets.!Six stations for each band can be stored inmemory.1 Press (list).Preset screen is displayed.2 Use M.C. to store the selected station inmemory.Turn to change the preset number. Press andhold to store.3 Use M.C. to select the desired station.Turn to change the station; press to select.#You can also change the station by pushingor or turning LEVER.Function and operation1 Press M.C. to display the main menu.2 Use M.C. to select FUNCTION.The function selection menu is displayed.Turn to change the menu option. Press to select.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Channel mode (channel select mode setting)You have two methods for selecting a channel: bynumber and by category. When selecting by num-ber, channels in any category can be selected. Se-lect by category to narrow your search down toonly channels in a particular category.1Press M.C. to change the channel selectmode.Channel number (channel number select set-ting)—Category (channel category select set-ting)Selecting a channel from achannel category1 Switch the channel select settings toCategory.Refer to Channel mode (channel select modesetting) on this page.2 Push or to select the desiredchannel category.3 Turn LEVER to select the desired channelfrom the selected channel category.Displaying the Radio ID1 Select the channel select settings toChannel number.Refer to Channel mode (channel select modesetting) on this page.2 Turn LEVER to select RADIO ID.#If you select another channel, display of the IDcode is canceled.#RADIO ID and the ID codes are repeatedly dis-played one after the other.SIRIUS Satellite Radio tunerYou can use this unit to control a SIRIUS SatelliteRadio tuner, which is sold separately.When the SIRIUS tuner is used together withthis unit, some operations differ slightly fromthose described in the SIRIUS operation man-ual. This manual provides information on thesepoints. For all other information on using theSIRIUS tuner, please refer to the SIRIUS opera-tion manual.Listening to SIRIUS Satellite Radio2 31 451SIRIUS band indicator2SIRIUS channel number indicator3SIRIUS preset number indicator4SIRIUS channel select setting indicatorShows what channel select setting has beenselected. CH is displayed whenChannel number is selected, and CAT is dis-played when Category is selected.I.R is displayed during the Instant Replaymode.5SIRIUS channel nameShows the channel name of broadcast chan-nel.Select a SIRIUS band.1Press BAND/.!Band can be selected from SR-1,SR-2 orSR-3.Select a channel.1Turn LEVER.!By turning and holding down LEVER, youcan increase or decrease the channelnumber continuously.!You can also perform tuning from a de-sired channel category. (Refer to Selectinga channel from a channel category on thenext page.)EnglishAvailable accessories23SectionAvailable accessoriesEn03
Switching the SIRIUS display1Press /DISP.Play time—Channel number—Channel name—Category name—Artist name—Song title/program title—Composer name!The play time is displayed during InstantReplay mode. Refer to Using the InstantReplay function on this page.!Play time display indicates the time in-verted from the live broadcast. The playtime is displayed as a negative number.Displaying the Radio ID1Turn LEVER to select CH 000.!To select CH 000, set the channel select set-ting to Channel number. About the channelselect setting, refer to Channel mode (channelselect mode setting) on this page.NoteIt may take a few seconds before you can hearanything while this unit acquires and processesthe satellite signal when you change the sourceto a SIRIUS tuner or select a channel.Storing and recalling broadcaststationsYou can easily store up to six stations for eachband as presets.!Six stations for each band can be stored inmemory.1 Press (list).Preset screen is displayed.2 Use M.C. to store the selected station inmemory.Turn to change the preset number. Press andhold to store.The SIRIUS preset number you have selectedwill flash and then remain lit. The selected sta-tion has been stored in memory.3 Use M.C. to select the desired station.Turn to change the station; press to select.#You can also change the station by pushingor or turning LEVER.Function and operation1 Press M.C. to display the main menu.2 Use M.C. to select FUNCTION.The function selection menu is displayed.Turn to change the menu option. Press to select.3 Turn M.C. to select the function.After selecting, perform the following proce-dures to set the function.Channel mode (channel select mode setting)You have two methods for selecting a channel: bynumber and by category. When selecting by num-ber, channels in any category can be selected. Se-lect by category to narrow your search down toonly channels in a particular category.1Press M.C. to change the channel selectmode.Channel number (channel number select set-ting)—Category (channel category select set-ting)Game alert (game alert setting)This system can alert you when games involvingyour favorite teams are about to start. To use thisfunction you need to set up a game alert for theteams in advance.!To use this function, a Pioneer SIRIUS bus in-terface (e.g. CD-SB10) is required.!To use this function, a SIRIUS plug-and-playunit with a Game Alert Function is required.!For details, refer to the SIRIUS plug-and-playunit’s manuals.!You can also operate this function when a SIR-PNR2 is connected to this unit.!The Game Alert function is on at the defaultsetting.!Once you select the teams, you need to turnthe Game Alert function on.1Press M.C. to turn the Game Alert on or off.!When a game of the selected team is about tostart (or is currently playing) on a different sta-tion, Game alert info is displayed. Press andhold M.C. to switch to that station, and youcan listen to that game.Team setting (team setting)1Press M.C. to select the function.2Turn M.C. to select a desired league.3Turn M.C. to select a desired team.4Press M.C. to store the selected team in mem-ory.The game alert function is activated for thatteam.5Repeat these steps to select other teams.!When FULL is displayed, additional teamscannot be selected. In this case, first deletea selected team and then try again.Game info (game information)If any games of the selected teams are currentlyplaying, you can display information on the gamesand tune in to the broadcast channel.You can display information on the games whileenjoying the sound from the station you are cur-rently tuned in to. You can also tune in to thebroadcast channel when you wish to.1Press M.C. to select the function.2Turn M.C. to select a game.!The game score will be updated automati-cally.3Press M.C. to switch to the other station andlisten to the game.!If you have not selected any teams, NOT SET isdisplayed.!When games involving your favorite teams arenot currently playing, NO GAME is displayed.Pause (pause)During the Instant Replay mode, you can selectPause (pause). Refer to Using the Instant Replayfunction on this page.1Press M.C. to pause or resume.Selecting a channel from achannel category1 Select the channel select settings toCategory.Refer to Channel mode (channel select modesetting) on this page.2 Push or to select the desiredchannel category.3 Turn LEVER to select the desired channelfrom the selected channel category.Using the Instant Replay functionThe following functions can be operated in In-stant Replay mode.Available accessories24SectionAvailable accessoriesEn03
!To use this function, a Pioneer SIRIUS bus in-terface (e.g. CD-SB10) is required.!To use this function, a SIRIUS plug-and-playunit with an Instant Replay Function is re-quired.!For details, refer to the SIRIUS plug-and-playunit’s manuals.Using Instant Replay mode1When SIRIUS tuner is selected as the source,press and hold BAND/.!When BAND/is pressed, instant replaymode is canceled.!When another source is selected, instantreplay mode is canceled.Select a track1Turn LEVER.Fast forward or reverse1Turn and hold down LEVER for about one sec-ond and then release.ConnectionsWARNING!Use speakers over 50 W (output value) andbetween 4 Wto 8 W(impedance value). Donot use 1 Wto 3 Wspeakers for this unit.!The black cable is ground. When installingthis unit or power amp (sold separately),make sure to connect the ground wire first.Ensure that the ground wire is properly con-nected to metal parts of the car’s body. Theground wire of the power amp and the one ofthis unit or any other device must be con-nected to the car separately with differentscrews. If the screw for the ground wire loos-ens or falls out, it could result in fire, genera-tion of smoke or malfunction.Ground wireMetal parts of car’s bodyPOWER AMPOther devices(Another electronic device in the car)Important!When installing this unit in a vehicle withoutan ACC (accessory) position on the ignitionswitch, failure to connect the red cable to theterminal that detects operation of the ignitionkey may result in battery drain.ONSTARTOFFACC position No ACC position!Use this unit with a 12-volt battery and nega-tive grounding only. Failure to do so may re-sult in a fire or malfunction.!To prevent a short-circuit, overheating or mal-function, be sure to follow the directionsbelow.—Disconnect the negative terminal of the bat-tery before installation.—Secure the wiring with cable clamps or adhe-sive tape. Wrap adhesive tape around wiringthat comes into contact with metal parts toprotect the wiring.—Place all cables away from moving parts,such as the shift lever and seat rails.—Place all cables away from hot places, suchas near the heater outlet.—Do not connect the yellow cable to the batteryby passing it through the hole to the enginecompartment.—Cover any disconnected cable connectorswith insulating tape.—Do not shorten any cables.—Never cut the insulation of the power cable ofthis unit in order to share the power withother devices. The current capacity of thecable is limited.—Use a fuse of the rating prescribed.—Never wire the negative speaker cable directlyto ground.—Never band together negative cables of multi-ple speakers.!When this unit is on, control signals are sentthrough the blue/white cable. Connect thiscable to the system remote control of an ex-ternal power amp or the vehicle’s auto-anten-na relay control terminal (max. 300 mA12 V DC). If the vehicle is equipped with aglass antenna, connect it to the antennabooster power supply terminal.!Never connect the blue/white cable to thepower terminal of an external power amp.Also, never connect it to the power terminalof the auto antenna. Doing so may result inbattery drain or a malfunction.EnglishAvailable accessories25SectionInstallationEn0304
This unit2 3 4 596 abedc7181USB port2Antenna input15 cm (5-7/8 in.)3IP-BUS input (blue)4Fuse (10 A)5Power cord input6Wired remote inputHard-wired remote control adaptor can beconnected (sold separately).7Microphone input (DEH-P8400BH only)8Microphone (DEH-P8400BH only)4 m (13 ft. 1 in.)9Rear outputaFront outputbSubwoofer outputcUSB cable1.5 m (4 ft. 11 in.)dIP-BUS cable (sold separately)ePioneer IP-BUS accessories (sold separately)Power cordPerform these connections when not connect-ing a rear speaker lead to a subwoofer.189cd632457abefhigLRFRPerform these connections when using a sub-woofer without the optional amplifier.189cd63247ababefighLRFSWjkdcl m1To power cord input2Left3Right4Front speaker5Rear speaker6White7White/black8Gray9Gray/blackaGreenbGreen/blackcVioletdViolet/blackeBlack (chassis ground)Connect to a clean, paint-free metal location.fYellowConnect to the constant 12 V supply termi-nal.gRedConnect to terminal controlled by ignitionswitch (12 V DC).hBlue/whiteConnect to system control terminal of thepower amp or auto-antenna relay control ter-minal (max. 300 mA 12 V DC).iOrange/whiteConnect to lighting switch terminal.jSubwoofer (4 W)kWhen using a subwoofer of 70 W (2 W), besure to connect the subwoofer to the violetand violet/black leads of this unit. Do notconnect anything to the green and green/black leads.lNot used.mSubwoofer (4 W)× 2Notes!With a 2 speaker system, do not connect any-thing to the speaker leads that are not con-nected to speakers.!Change the initial setting of this unit. Referto S/W control (rear output and subwoofersetting) on page 15.The subwoofer output of this unit is monau-ral.Power amp (sold separately)Perform these connections when using the op-tional amplifier.1132455326771328991System remote controlConnect to Blue/white cable.2Power amp (sold separately)3Connect with RCA cables (sold separately)4To Rear output5Rear speaker6To Front output7Front speaker8To subwoofer output9SubwooferInstallationImportant!Check all connections and systems beforefinal installation.!Do not use unauthorized parts as this maycause malfunctions.!Consult your dealer if installation requiresdrilling of holes or other modifications to thevehicle.!Do not install this unit where:—it may interfere with operation of the vehicle.—it may cause injury to a passenger as a resultof a sudden stop.Installation26SectionInstallationEn04
!The semiconductor laser will be damaged ifit overheats. Install this unit away from hotplaces such as near the heater outlet.!Optimum performance is obtained when theunit is installed at an angle of less than 60°.60°!When installing, to ensure proper heat dis-persal when using this unit, make sure youleave ample space behind the rear panel andwrap any loose cables so they are not block-ing the vents.5cmcmLeave ample space 5 cm5 cmDIN front/rear mountThis unit can be properly installed using eitherfront-mount or rear-mount installation.Use commercially available parts when instal-ling.DIN Front-mount1 Insert the mounting sleeve into the dash-board.For installation in shallow spaces, use the sup-plied mounting sleeve. If there is enough space,use the mounting sleeve that came with the ve-hicle.2 Secure the mounting sleeve by using ascrewdriver to bend the metal tabs (90°) intoplace.121Dashboard2Mounting sleeve3 Install the unit as illustrated.123451Nut2Firewall or metal support3Metal strap4Screw5Screw (M4 × 8)#Make sure that the unit is installed securely inplace. An unstable installation may cause skippingor other malfunctions.DIN Rear-mount1 Determine the appropriate positionwhere the holes on the bracket and the sideof the unit match.2 Tighten two screws on each side.1231Screw2Mounting bracket3Dashboard or console!Use either truss (5 mm × 8 mm) or flush sur-face (5 mm × 9 mm) screws, depending onthe bracket screw holes.Removing the unit1 Remove the trim ring.1Trim ring2Notched tab!Releasing the front panel allows easier ac-cess to the trim ring.!When reattaching the trim ring, point theside with the notched tab down.2 Insert the supplied extraction keys intoboth sides of the unit until they click intoplace.3 Pull the unit out of the dashboard.Removing and re-attaching thefront panelYou can remove the front panel to protect yourunit from theft.Press the detach button and push the frontpanel upward and pull it toward you.For details, refer to Removing the front panel toprotect your unit from theft and Re-attaching thefront panel on page 6.Securing the front panelThe front panel can be secured with the sup-plied screw.11ScrewEnglishInstallation27SectionInstallationEn04
Installing the microphone!Only for DEH-P8400BHCAUTIONIt is extremely dangerous to allow the micro-phone lead to become wound around the steer-ing column or shift lever. Be sure to install theunit in such a way that it will not obstruct driv-ing.NoteInstall the microphone in a position and orienta-tion that will enable it to pick up the voice of theperson operating the system.When installing the microphoneon the sun visor1 Install the microphone on the micro-phone clip.121Microphone2Microphone clip2 Install the microphone clip on the sunvisor.With the sun visor up, install the microphoneclip. (Lowering the sun visor reduces the voicerecognition rate.)211Microphone clip2ClampWhen installing the microphoneon the steering column1 Install the microphone on the micro-phone clip.12341Microphone2Microphone base3Microphone clip4Fit the microphone lead into the groove.#Microphone can be installed without using mi-crophone clip. In this case, detach the microphonebase from the microphone clip. To detach the micro-phone base from the microphone clip, slide the mi-crophone base.2 Install the microphone clip on the steer-ing column.1231Double-sided tape2Install the microphone clip on the rear side ofthe steering column.3ClampAdjusting the microphone angleThe microphone angle can be adjusted.Installation28SectionInstallationEn04
TroubleshootingSymptom Cause ActionThe displayautomaticallyreturns to theordinary dis-play.You did not per-form any opera-tion withinabout 30 sec-onds.Perform operationagain.The repeatplay rangechanges un-expectedly.Depending onthe repeat playrange, the se-lected rangemay changewhen anotherfolder or track isbeing selectedor during fastforwarding/re-versing.Select the repeatplay range again.A subfolder isnot playedback.Subfolders can-not be playedwhen Folder re-peat (folder re-peat) isselected.Select another re-peat play range.NO XXXX ap-pears when adisplay ischanged (NOTITLE, for ex-ample).There is no em-bedded text in-formation.Switch the displayor play anothertrack/file.No text informa-tion can be ob-tained!Switch thebroadcast station.!Operate thisunit in areas withget good recep-tion condition.The displayscreenchanges atrandom.Demo mode ison.!Press and hold/DISP to canceldemo mode.!Turn off thedemo display set-ting.Symptom Cause ActionThe displayscreenchanges atrandom in-stead of dis-playing theclock continu-ously evenwith the clockdisplay turnedon.Demo mode ison.!Press and hold/DISP to canceldemo mode.!Turn off thedemo display set-ting.The displayscreenchanges atrandom evenwith the dis-play offturned on.Demo mode ison.!Press and hold/DISP to canceldemo mode.!Turn off thedemo display set-ting.The unit ismalfunction-ing.There is inter-ference.You are using adevice, such asa cellularphone, thattransmits elec-tric waves nearthe unit.Move electricaldevices that maybe causing the in-terference awayfrom the unit.Symptom Cause ActionThe soundfrom theBluetoothaudio sourceis not playedback.There is a call inprogress on aBluetooth con-nected cellularphone.The sound will beplayed back whenthe call is termi-nated.A Bluetoothconnected cel-lular phone iscurrently beingoperated.Do not operatethe cellular phoneat this time.A call wasmade with aBluetooth con-nected cellularphone and thenimmediately ter-minated. As aresult, commu-nication be-tween this unitand the cellularphone was notterminatedproperly.Reconnect theBluetooth con-nection betweenthis unit and thecellular phone.Text informa-tion cannotbe scrolled.Display scroll-ing is stoppedautomaticallywhen the tem-perature aroundthis unit is 50°For less.Wait until itwarms back up.Movie play-back isstopped andthe simpledisplay ap-pears.Movie playbackis stopped auto-matically whenthe temperaturearound this unitis 50°F or less.Wait until itwarms back up.Symptom Cause ActionSound fromthe iPod can-not be heard.The audio out-put directionmay switch au-tomaticallywhen theBluetooth andUSB connec-tions are usedat the sametime.Use the iPod tochange the audiooutput direction.Error messagesWhen you contact your dealer or your nearestPioneer Service Center, be sure to note the errormessage.CD playerMessage Cause ActionERROR-07,11, 12, 17, 30The disc is dirty. Clean the disc.The disc isscratched.Replace the disc.ERROR-10,11, 12, 15,17, 30, A0There is an elec-trical or me-chanical error.Turn the ignitionswitch OFF andback ON, orswitch to a differ-ent source, thenback to the CDplayer.ERROR-15 The inserteddisc is blank.Replace the disc.ERROR-23 UnsupportedCD format.Replace the disc.EnglishAdditional information29AppendixAdditional informationEn
Message Cause ActionFORMATREADSometimesthere is a delaybetween thestart of playbackand when youstart to hear anysound.Wait until themessage disap-pears and youhear sound.NO AUDIO The inserteddisc does notcontain anyplayable files.Replace the disc.SKIPPED The inserteddisc containsDRM protectedfiles.Replace the disc.PROTECT All the files onthe inserteddisc are em-bedded withDRM.Replace the disc.USB storage device/iPodMessage Cause ActionNO DEVICE When plug andplay is off, noUSB storage de-vice or iPod isconnected.!Turn the plugand play on.!Connect a com-patible USB stor-age device/iPod.FORMATREADSometimesthere is a delaybetween thestart of playbackand when youstart to hear anysound.Wait until themessage disap-pears and youhear sound.Message Cause ActionNO AUDIO There are nosongs.Transfer the audiofiles to the USBstorage deviceand connect.The connectedUSB storage de-vice has secur-ity enabled.Follow the USBstorage device in-structions to dis-able the security.SKIPPED The connectedUSB storage de-vice containsfiles embeddedwith WindowsMediaäDRM 9/10.Play an audio filenot embeddedwith WindowsMedia DRM 9/10.PROTECT All the files inthe USB storagedevice are em-bedded withWindows MediaDRM 9/10.Transfer audiofiles not em-bedded withWindows MediaDRM 9/10 to theUSB storage de-vice and connect.NOT COM-PATIBLEThe USB deviceconnected to isnot supportedby this unit.!Connect a USBMass StorageClass compliantdevice.!Disconnectyour device andreplace it with acompatible USBstorage device.Non-compatibleiPodDisconnect yourdevice and re-place it with acompatible iPod.Message Cause ActionCHECK USB The USB con-nector or USBcable has short-circuited.Check that theUSB connector orUSB cable is notcaught in some-thing or dam-aged.The connectedUSB storage de-vice consumesmore than500 mA (maxi-mum allowablecurrent).Disconnect theUSB storage de-vice and do notuse it. Turn theignition switch toOFF, then to ACCor ON and thenconnect onlycompliant USBstorage devices.The iPod oper-ates correctlybut does notcharge.Make sure theconnection cablefor the iPod hasnot shorted out(e.g., not caughtin metal objects).After checking,turn the ignitionswitch OFF andback ON, or dis-connect the iPodand reconnect.Message Cause ActionERROR-19 Communicationfailed.!Perform one ofthe following op-erations.–Turn the ignitionswitch OFF andback ON.–Disconnect theUSB storage de-vice.–Change to a dif-ferent source.Then, return tothe USB source.!Disconnect thecable from theiPod. Once theiPod’s mainmenu is dis-played, reconnectthe iPod and resetit.iPod failure. Disconnect thecable from theiPod. Once theiPod’s mainmenu is dis-played, reconnectthe iPod and resetit.ERROR-23 USB storage de-vice was not for-matted withFAT12, FAT16 orFAT32.USB storage de-vice should be for-matted withFAT12, FAT16 orFAT32.Additional information30AppendixAdditional informationEn
Message Cause ActionERROR-16 The iPod firm-ware version isold.Update the iPodversion.iPod failure. Disconnect thecable from theiPod. Once theiPod’s mainmenu is dis-played, reconnectthe iPod and resetit.STOP There are nosongs in thecurrent list.Select a list thatcontains songs.Not found No relatedsongs.Transfer songs tothe iPod.Bluetooth deviceMessage Cause ActionERROR-10 The power failedfor theBluetooth mod-ule of this unit.Turn the ignitionswitch OFF andthen to ACC orON.If the error mes-sage is still dis-played afterperforming theabove action,please contactyour dealer or anauthorizedPioneer ServiceStation.PandoraMessage Cause ActionERROR-19 Communicationfailed.Disconnect thecable from theiPod. Once theiPod’s mainmenu is dis-played, reconnectthe iPod and resetit.Start up thePandora Ap-plicationThe Pandora ap-plication hasnot started run-ning yet.Start up thePandora applica-tion from youriPod/iPhone.Try againlaterUnable to savethumb rating.Unable to saveBookMark.Pandora systemis undergoingmaintenance.Try again later.Skip limitreachedSkip limitreached.Do not exceed theskip limit.Check Appli-cationThis version ofthe Pandora ap-plication is notsupported.Connect an iPod/iPhone that has acompatible ver-sion of thePandora applica-tion installed.Check Device Device errormessage dis-played inPandora Appli-cation.Unable to playmusic fromPandora.Please check youriPod/iPhone.Message Cause ActionNo AvailableStationNo stationfound.Create a stationin the Pandoraapplication onyour iPod/iPhone.No ActiveStationsNo station se-lected.Select a station.Handling guidelinesDiscs and playerUse only discs that feature either of the followingtwo logos.Use 12-cm discs. Do not use 8-cm discs or anadapter for 8-cm discs.Use only conventional, fully circular discs. Do notuse shaped discs.Do not insert anything other than a CD into theCD loading slot.Do not use cracked, chipped, warped, or other-wise damaged discs as they may damage the play-er.Unfinalized CD-R/RW discs cannot be playedback.Do not touch the recorded surface of the discs.Store discs in their cases when not in use.Do not attach labels, write on or apply chemicalsto the surface of the discs.To clean a CD, wipe the disc with a soft cloth out-ward from the center.Condensation may temporarily impair the player’sperformance. Let it rest for about one hour to ad-just to a warmer temperature. Also, wipe anydamp discs off with a soft cloth.Playback of discs may not be possible because ofdisc characteristics, disc format, recorded applica-tion, playback environment, storage conditions,and so on.Road shocks may interrupt disc playback.When using discs that can be printed on label sur-faces, check the instructions and the warnings ofthe discs. Depending on the discs, inserting andejecting may not be possible. Using such discsmay result in damage to this equipment.Do not attach commercially available labels orother materials to the discs.!The discs may warp making the disc unplay-able.!The labels may come off during playback andprevent ejection of the discs, which may resultin damage to the equipment.USB storage deviceConnections via USB hub are not supported.Do not connect anything other than a USB stor-age device.EnglishAdditional information31AppendixAdditional informationEn
Firmly secure the USB storage device when driv-ing. Do not let the USB storage device fall onto thefloor, where it may become jammed under thebrake or accelerator pedal.Depending on the USB storage device, the follow-ing problems may occur.!Operations may vary.!The storage device may not be recognized.!Files may not be played back properly.!The device may generate noise in the radio.iPodTo ensure proper operation, connect the dock con-nector cable from the iPod directly to this unit.Firmly secure the iPod when driving. Do not let theiPod fall onto the floor, where it may becomejammed under the brake or accelerator pedal.About iPod settings!When an iPod is connected, this unit changesthe EQ (equalizer) setting of the iPod to off inorder to optimize the acoustics. When you dis-connect the iPod, the EQ returns to the originalsetting.!You cannot set Repeat to off on the iPod whenusing this unit. Repeat is automaticallychanged to All when the iPod is connected tothis unit.Incompatible text saved on the iPod will not be dis-played by the unit.DualDiscsDualDiscs are two-sided discs that have a record-able CD for audio on one side and a recordableDVD for video on the other.Since the CD side of DualDiscs is not physicallycompatible with the general CD standard, it maynot be possible to play the CD side with this unit.Frequent loading and ejecting of a DualDisc mayresult in scratches on the disc. Serious scratchescan lead to playback problems on this unit. Insome cases, a DualDisc may become stuck in thedisc loading slot and will not eject. To prevent this,we recommend you refrain from using DualDiscwith this unit.Please refer to the information from the disc man-ufacturer for more detailed information aboutDualDiscs.CAUTIONDo not leave discs, a USB storage device, or aniPod in any place that is subject to high temper-atures.Compressed audiocompatibility (disc, USB)WMAFile extension: .wmaBit rate: 48 kbps to 320 kbps (CBR), 48 kbps to384 kbps (VBR)Sampling frequency: 32 kHz, 44.1 kHz, 48 kHzWindows Media Audio Professional, Lossless,Voice/DRM Stream/Stream with video: Not com-patibleMP3File extension: .mp3Bit rate: 8 kbps to 320 kbps (CBR), VBRSampling frequency: 8kHz to 48 kHz (32kHz,44.1 kHz, 48 kHz for emphasis)Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4(ID3 tag Version 2.x is given priority over Version1.x.)M3u playlist: Not compatibleMP3i (MP3 interactive), mp3 PRO: Not compatibleWAVFile extension: .wavQuantization bits: 8 and 16 (LPCM), 4 (MSADPCM)Sampling frequency: 16 kHz to 48 kHz (LPCM),22.05 kHz and 44.1kHz (MS ADPCM)AACCompatible format: AAC encoded by iTunesFile extension: .m4aSampling frequency: 11.025 kHz to 48 kHzTransmission rate: 16 kbps to 320 kbps, VBRApple Lossless: Not compatibleAAC file bought from the iTunes Store (.m4p fileextension): Not compatibleSupplemental informationOnly the first 32 characters can be displayed as afile name (including the file extension) or a foldername.This unit may not operate correctly depending onthe application used to encode WMA files.There may be a slight delay at the start of playbackof audio files embedded with image data or audiofiles stored on a USB storage device that has nu-merous folder hierarchies.DiscPlayable folder hierarchy: up to eight tiers (A prac-tical hierarchy is less than two tiers).Playable folders: up to 99Playable files: up to 999File system: ISO 9660 Level 1 and 2, Romeo, JolietMulti-session playback: CompatiblePacket write data transfer: Not compatibleRegardless of the length of blank sections be-tween the songs from the original recording, com-pressed audio discs play with a short pausebetween songs.USB storage devicePlayable folder hierarchy: up to eight tiers (A prac-tical hierarchy is less than two tiers).Playable folders: up to 1 500Playable files: up to 15 000Playback of copyright-protected files: Not compati-blePartitioned USB storage device: Only the first par-tition can be played.There may be a slight delay when starting play-back of audio files on a USB storage device withnumerous folder hierarchies.CAUTION!Pioneer accepts no responsibility for datalost on the USB storage device even if thatdata is lost while using this unit.Additional information32AppendixAdditional informationEn
!Pioneer cannot guarantee compatibility withall USB mass storage devices and assumesno responsibility for any loss of data onmedia players, smart phones, or other devi-ces while using this product.iPod compatibilityThis unit supports only the following iPod models.Supported iPod software versions are shownbelow. Older versions may not be supported.Made for!iPod touch 4th generation (software version4.1)!iPod touch 3rd generation (software version3.1.1)!iPod touch 2nd generation (software version2.1.1)!iPod touch 1st generation (software version1.1)!iPod classic 160GB (software version 2.0.2)!iPod classic 120GB (software version 2.0)!iPod classic (software version 1.0)!iPod with video (software version 1.2.3)!iPod nano 6th generation (software version1.0)!iPod nano 5th generation (software version1.0.1)!iPod nano 4th generation (software version1.0)!iPod nano 3rd generation (software version1.0)!iPod nano 2nd generation (software version1.1.3)!iPod nano 1st generation (software version1.3.1)!iPhone 4 (software version 4.1)!iPhone 3GS (software version 3.0)!iPhone 3G (software version 2.0)!iPhone (software version 1.1.1)Depending on the generation or version of theiPod, some functions may not be available.Operations may vary depending on the softwareversion of iPod.When using an iPod, an iPod Dock Connector toUSB Cable is required.A Pioneer CD-IU51 interface cable is also avail-able. For details, consult your dealer.About the file/format compatibility, refer to theiPod manuals.Audiobook, Podcast: CompatibleCAUTIONPioneer accepts no responsibility for data loston the iPod, even if that data is lost while thisunit is used.Sequence of audio filesThe user cannot assign folder numbers andspecify playback sequences with this unit.Example of a hierarchyLevel 1 Level 2 Level 3 Level 4 0102030405: Folder: Compressedaudio file01 to 05: Foldernumber1to 6: PlaybacksequenceDiscFolder selection sequence or other operationmay differ depending on the encoding or writingsoftware.USB storage devicePlayback sequence is the same as recorded se-quence in the USB storage device.To specify the playback sequence, the followingmethod is recommended.1Create a file name that includes numbersthat specify the playback sequence (e.g.,001xxx.mp3 and 099yyy.mp3).2Put those files into a folder.3Save the folder containing files on the USBstorage device.However, depending on the system environment,you may not be able to specify the playback se-quence.For USB portable audio players, the sequence isdifferent and depends on the player.Bluetooth profilesIn order to use Bluetooth wireless technology,devices must be able to interpret certain pro-files. This unit is compatible with the followingprofiles.!GAP (Generic Access Profile)!SDP (Service Discovery Protocol)!OPP (Object Push Profile)!HFP (Hands Free Profile)!HSP (Head Set Profile)!PBAP (Phone Book Access Profile)!A2DP (Advanced Audio Distribution Profile)!AVP (Audio/Video Profile)!AVRCP (Audio/Video Remote Control Profile)1.0Copyright and trademarkBluetoothThe Bluetoothâword mark and logos are regis-tered trademarks owned by Bluetooth SIG, Inc.and any use of such marks by PIONEER COR-PORATION is under license. Other trademarksand trade names are those of their respectiveowners.iTunesApple and iTunes are trademarks of Apple Inc.,registered in the U.S. and other countries.MP3Supply of this product only conveys a license forprivate, non-commercial use and does not con-vey a license nor imply any right to use this prod-uct in any commercial (i.e. revenue-generating)real time broadcasting (terrestrial, satellite,cable and/or any other media), broadcasting/streaming via internet, intranets and/or othernetworks or in other electronic content distribu-tion systems, such as pay-audio or audio-on-de-mand applications. An independent license forsuch use is required. For details, please visithttp://www.mp3licensing.com.WMAWindows Media is either a registered trademarkor trademark of Microsoft Corporation in theUnited States and/or other countries.This product includes technology owned byMicrosoft Corporation and cannot be used ordistributed without a license from MicrosoftLicensing, Inc.iPod & iPhoneiPhone, iPod, iPod classic, iPod nano, and iPodtouch are trademarks of Apple Inc., registered inthe U.S. and other countries.“Made for iPod”and “Made for iPhone”meanthat an electronic accessory has been designedto connect specifically to iPod or iPhone, respec-tively, and has been certified by the developer tomeet Apple performance standards. Apple isnot responsible for the operation of this deviceor its compliance with safety and regulatorystandards. Please note that the use of this ac-cessory with iPod or iPhone may affect wirelessperformance.EnglishAdditional information33AppendixAdditional informationEn
HD RadioäTechnologyHD Radio Technology manufactured under li-cense from iBiquity Digital Corporation. U.S.and Foreign Patents. HD Radioäand the HD,HD Radio, and “Arc”logos are proprietary trade-marks of iBiquity Digital Corp.SAT RadioThe SAT RADIO READY mark indicates that theSatellite Radio Tuner for Pioneer (i.e., XM tunerand Sirius satellite tuner which are sold sepa-rately) can be controlled by this unit. Please in-quire to your dealer or nearest authorizedPioneer service station regarding the satelliteradio tuner that can be connected to this unit.For satellite radio tuner operation, please refer tothe satellite radio tuner owner’s manual.!Everything worth listening to is on SiriusXM,getting over 130 channels, including themost commercial-free music, plus the bestsports, news, talk and entertainment. A Sir-iusXM Vehicle Tuner and Subscription are re-quired. For more information, visit“http://www.siriusxm.com”!Sirius, XM, SAT Radio Ready and all relatedlogos and marks are trademarks of Sirius XMRadio, Inc. All rights reserved.PandoraPandora is a registered trademark of PandoraMedia, Inc.MIXTRAXMIXTRAX is a trademark of the PIONEER COR-PORATION.SpecificationsGeneralPower source ................... 14.4 V DC (10.8 V to 15.1 V al-lowable)Grounding system ............ Negative typeMaximum current consumption................................... 10.0 ADimensions (W × H × D):DINChassis .............. 178mm × 50mm ×165 mm(7 in. × 2in. × 6-1/2 in.)Nose .................. 188 mm × 58mm ×18 mm(7-3/8 in.× 2-1/4in.× 3/4 in.)DChassis .............. 178mm × 50mm ×165 mm(7 in.× 2 in.× 6-1/2 in.)Nose .................. 170 mm × 46mm ×18 mm(6-3/4 in.× 1-3/4in.× 3/4 in.)Weight ............................. 1.2 kg (2.6 lbs)AudioMaximum power output ... 50 W × 450 W × 2/4 W+70W×1/2W(for subwoofer)Continuous power output................................... 22W × 4 (50 Hz to 15000Hz,5 % THD, 4 Wload, both chan-nels driven)Load impedance .............. 4 Wto 8 W×44Wto 8 W×2+2W×1Preout maximum output level................................... 4.0 VEqualizer (5-Band Graphic Equalizer):Frequency ................. 100Hz/315 Hz/1.25 kHz/3.15 kHz/8 kHzGain ......................... ±12 dBHPF:Frequency ................. 50 Hz/63 Hz/80 Hz/100 Hz/125 HzSlope ........................ –12 dB/octSubwoofer (mono):Frequency ................. 50 Hz/63 Hz/80 Hz/100 Hz/125 HzSlope ........................ –18 dB/octGain ......................... +6dB to –24 dBPhase ....................... Normal/ReverseBass boost:Gain ......................... +12 dB to 0 dBCD playerSystem ............................ Compact disc audio systemUsable discs .................... Compact discSignal-to-noise ratio ......... 94 dB (1kHz) (IHF-A network)Number of channels ........ 2 (stereo)MP3 decoding format ...... MPEG-1 & 2 Audio Layer 3WMA decoding format ..... Ver. 7, 7.1, 8, 9, 10, 11, 12 (2chaudio)(Windows Media Player)AAC decoding format ....... MPEG-4 AAC (iTunes encodedonly) (.m4a)(Ver. 9.2 and earlier)WAV signal format ........... Linear PCM & MS ADPCM(Non-compressed)USBUSB standard specification................................... USB 2.0 full speedMaximum current supply................................... 1AUSB Class ....................... MSC (Mass Storage Class)File system ....................... FAT12, FAT16, FAT32MP3 decoding format ...... MPEG-1 & 2 Audio Layer 3WMA decoding format ..... Ver. 7, 7.1, 8, 9, 10, 11, 12 (2chaudio)(Windows Media Player)AAC decoding format ....... MPEG-4 AAC (iTunes encodedonly) (.m4a)(Ver. 9.2 and earlier)WAV signal format ........... Linear PCM & MS ADPCM(Non-compressed)FM tunerFrequency range .............. 87.9 MHz to 107.9 MHzUsable sensitivity ............. 9dBf (0.8 µV/75 W, mono, S/N:30 dB)Signal-to-noise ratio ......... 80 dB (digital broadcasting)(IHF-A network)Signal-to-noise ratio ......... 72 dB (analog broadcasting)(IHF-A network)Additional information34AppendixAdditional informationEn
AM tunerFrequency range .............. 530 kHz to 1710 kHzUsable sensitivity ............. 25µV (S/N: 20 dB)Signal-to-noise ratio ......... 80 dB (digital broadcasting)(IHF-A network)Signal-to-noise ratio ......... 62 dB (analog broadcasting)(IHF-A network)Bluetooth (DEH-P8400BH only)Version ............................ Bluetooth 3.0 certifiedOutput power ................... +4 dBm Maximum(Power class 2)CEA2006 SpecificationsPower output ................... 14 W RMS × 4 Channels (4 Wand ≦1 % THD+N)S/N ratio .......................... 91 dBA (reference: 1 W into4W)NoteSpecifications and the design are subject tomodifications without notice.EnglishAdditional information35AppendixEn
PIONEER CORPORATION1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,Kanagawa 212-0031, JAPANPIONEER ELECTRONICS (USA) INC.P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404PIONEER EUROPE NVHaven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/BelgiqueTEL: (0) 3/570.05.11PIONEER ELECTRONICS ASIACENTRE PTE. LTD.253 Alexandra Road, #04-01, Singapore 159936TEL: 65-6472-7555PIONEER ELECTRONICS AUSTRALIA PTY. LTD.5 Arco Lane, Heatherton, Victoria, 3202 AustraliaTEL: (03) 9586-6300PIONEER ELECTRONICS OF CANADA, INC.340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, CanadaTEL: 1-877-283-5901TEL: 905-479-4411PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.Blvd.Manuel Avila Camacho 138 10 pisoCol.Lomas de Chapultepec, Mexico, D.F. 11000TEL: 55-9178-4270先鋒股份有限公司台北市內湖區瑞光路407號8樓電話：(02) 2657-3588先鋒電子（香港）有限公司香港九龍長沙灣道909號5樓電話：(0852) 2848-6488ã2011 PIONEER CORPORATION. All rights reserved.ã2011 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés. Printed in ChinaImprimé en Chine<YRD5364-A/S> UC<KYTZX> <11I00000>

Navigation menu