Pioneer K045 CD RDS RECEIVER User Manual DEH P8400BH EN

Download:
Mirror Download [FCC.gov]
Document ID	1576333
Application ID	57vJHP/VeyB6e8slVkI6tg==
Document Description	User Manual_DEH-P8400BH(EN)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	130.53kB (1631681 bits)
Date Submitted	2011-11-07 00:00:00
Date Available	2012-05-05 00:00:00
Creation Date	2011-09-15 23:18:08
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2011-10-24 12:08:11
Document Title	User Manual_DEH-P8400BH(EN)
Document Creator	Arbortext Advanced Print Publisher 9.1.520/W Unicode

CD RDS RECEIVER
AUTORADIO CD RDS
REPRODUCTOR DE CD CON RECEPTOR RDS
English
Français
Español
DEH-P8400BH
DEH-P7400HD
Owner’s Manual
Mode d’emploi
Manual de instrucciones
Section
Contents
01
Before you start
Additional information
Troubleshooting
29
Error messages
29
Handling guidelines
31
Compressed audio compatibility (disc,
USB)
32
iPod compatibility
33
Sequence of audio files
33
Bluetooth profiles
33
Copyright and trademark
33
Specifications
34
Before you start
Information to User
The Safety of Your Ears is in Your
Hands
About this unit
After-sales service for Pioneer
products
In case of trouble
Visit our website
Demo mode
About this manual
Operating this unit
Head unit
Remote control
Set up menu
Basic operations
Use and care of the remote control
Menu operations identical for function
settings/audio adjustments/initial
settings/lists
Tuner
CD/CD-R/CD-RW and USB storage
devices
iPod
Using Pandoraâ
10
Audio adjustments
11
Using Bluetooth wireless technology
12
Initial settings
14
Other functions
16
Available accessories
Bluetooth Audio
18
Bluetooth telephone
19
XM tuner
22
SIRIUS Satellite Radio tuner
Installation
Connections
25
Installation
26
Installing the microphone
En
23
28
Thank you for purchasing this PIONEER
product
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARNINGs and CAUTIONs in this manual. Please
keep the manual in a safe and accessible place for
future reference.
FCC ID: AJDK045
MODEL NO.: DEH-P8400BH
IC: 775E-K045
This device complies with Part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the
following two conditions: (1) this device may
not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation
of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
The antenna for Bluetooth cannot be removed
(or replaced) by user.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy
that it deemed to comply without maximum
permissive exposure evaluation (MPE). But it
is desirable that it should be installed and operated keeping the radiator at least 20 cm or
more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
MODEL NO.: DEH-P7400HD
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate
the user’s right to operate the equipment.
Section
Before you start
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing it
at a safe level—a level that lets the sound come
through clearly without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing. Sound can be deceiving.
Over time, your hearing “comfort level” adapts to
higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing
adapts.
ESTABLISH A SAFE LEVEL:
! Set your volume control at a low setting.
! Slowly increase the sound until you can hear
it comfortably and clearly, without distortion.
! Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE
FOLLOWING GUIDELINES:
! Do not turn up the volume so high that you
can’t hear what’s around you.
! Use caution or temporarily discontinue use
in potentially hazardous situations.
! Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many areas.
About this unit
The tuner frequencies on this unit are allocated
for use in North America. Use in other areas
may result in poor reception.
WARNING
Handling the cord on this product or cords associated with accessories sold with the product
may expose you to chemicals listed on proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm. Wash
hands after handling.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
01
After-sales service for
Pioneer products
English
Note
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
Before you start
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary information is not available, please contact the companies listed below:
Please do not ship your unit to the companies at
the addresses listed below for repair without advance contact.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and overheating could result from contact with
liquids.
! Always keep the volume low enough to hear
outside sounds.
! Avoid exposure to moisture.
! If the battery is disconnected or discharged,
any preset memory will be erased.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Note
Function setting operations are completed even
if the menu is cancelled before the operations
are confirmed.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
340 Ferrier Street
Unit 2
Markham, Ontario L3R 2Z5, Canada
1-877-283-5901
905-479-4411
For warranty information please see the Limited
Warranty sheet included with this unit.
In case of trouble
Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.
Visit our website
http://www.pioneerelectronics.com
in Canada
En
Section
Before you start
01
Operating this unit
02
http://www.pioneerelectronics.ca
! Learn about product updates (such as firmware updates) for your product.
! Register your product to receive notices
about product updates and to safeguard purchase details in our files in the event of loss
or theft.
! Access owner’s manuals, spare parts information, service information, and much
more.
Head unit
1 2 3
The demo starts automatically if you do not operate this unit within about 30 seconds since it
was last operated or if the ignition switch is set
to ACC or ON while it is turned off. To cancel the
demo mode, press and hold ( /DISP). Press
and hold ( /DISP) again to start. You can also
deactivate demo mode in the initial settings. Select Demonstration (demo display setting) and
turn off the demo display. For details, refer to Initial settings on page 14.
56
d c b a
Demo mode
Important
! Failure to connect the red lead (ACC) of this
unit to a terminal coupled with ignition
switch on/off operations may lead to battery
drain.
! Remember that if the feature demo continues operating when the car engine is turned
off, it may drain battery power.
Part
Part
(DEH-P8400BH)
Part
87
Part
SRC/OFF
AUX input jack
(3.5 mm stereo
jack)
(list)
LEVER
Disc loading slot
h (eject)
BAND/
PHONE (phone/
on hook)
MIX
Detach button
/DISP
(iPod)
56
(list)
LEVER
MULTI-CONTROL
(M.C.)
Disc loading slot
h (eject)
BAND/
CLOCK
MIX
Detach button
/DISP
Use a Pioneer USB cable when connecting the
USB audio player/USB memory device as devices connected to the unit directly will protrude
out, which is dangerous.
Do not use unauthorized products.
Remote controller buttons marked with the
same numbers as on the unit operate in the
same way as the corresponding unit button regardless of button name.
(DEH-P8400BH)
About this manual
! In the following instructions, USB memories
and USB audio players are collectively referred to as “USB storage device”.
! In this manual, iPod and iPhone will be referred to as “iPod”.
En
d c b a
(iPod)
Remote control
(DEH-P7400HD)
1 2 3
AUX input jack
(3.5 mm stereo
jack)
CAUTION
MULTI-CONTROL
(M.C.)
SRC/OFF
87
Section
Operating this unit
Operation
VOLUME
Press to increase or decrease
volume.
MUTE
Press to mute. Press again to
unmute.
a/b/c/d
While operating the phone,
press to end a call or reject an
incoming call.
Press to pause or resume playback.
Press to start talking on the
phone while operating a
phone.
Press to perform manual seek
tuning, fast forward, reverse
and track search controls.
Also used for controlling functions.
LIST/
ENTER
Press to display the disc title,
track title, folder, or file list depending on the source.
While in the operating menu,
press to control functions.
Part
Operation
If you select NO, you cannot set up in the set up
menu.
5 To finish your settings, turn M.C. to select
YES.
VOLUME
Press to increase or decrease
volume.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
MUTE
Press to mute. Press again to
unmute.
a/b/c/d
Press to perform manual seek
tuning, fast forward, reverse
and track search controls.
Also used for controlling functions.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
Language select (multi-language)
AUDIO
Press to select an audio function.
1 Turn M.C. to select the desired language.
English—Français—Español
2 Press M.C. to confirm the selection.
Press to pause or resume playback.
Calendar (setting the date)
FUNCTION
Press to select functions.
Press and hold to recall the initial setting menu when the
sources are off.
LIST/
ENTER
Press to display the disc title,
track title, folder, or file list depending on the source.
While in the operating menu,
press to control functions.
Set up menu
Press M.C. to select.
(DEH-P7400HD)
02
When you turn the ignition switch to ON after installation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
Turn M.C. to change the year.
Press M.C. to select day.
Turn M.C. to change the day.
Press M.C. to select month.
Turn M.C. to change the month.
Press M.C. to confirm the selection.
Clock (setting the clock)
Turn M.C. to adjust hour.
Press M.C. to select minute.
Turn M.C. to adjust minute.
Press M.C. to confirm the selection.
English
Part
Operating this unit
Press M.C. to select.
Notes
! Because demonstration mode is the function
for displaying at stores, do not use this function while driving.
! You can set up the menu options in the initial
settings. For details about the settings, refer
to Initial settings on page 14.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle interior, remove any cables and devices attached
to the front panel before detaching it.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Demonstration (demo display setting)
1 Turn M.C. to set the demo display to off.
2 Press M.C. to confirm the selection.
Quit appears.
En
Section
Operating this unit
02
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull
it toward (N) you.
Operating this unit
Selecting a source
1 Press SRC/OFF to cycle between:
XM (XM tuner)—SIRIUS (SIRIUS tuner)—
TUNER (tuner)—CD (CD player)—USB (USB
storage device)/iPod (iPod connected using
USB input)—Pandora (Pandora)—EXT (external unit 1)—EXT (external unit 2)—AUX1
(AUX1)—AUX2 (AUX2)—BT Audio (BT audio)
—TEL (BT telephone)
Adjusting the volume
1 Turn M.C. to adjust the volume.
3 Always keep the detached front panel in a protection device such as a protection case.
Re-attaching the front panel
1 Slide the front panel to the left.
Make sure to insert the tabs on the left side of
the head unit into the slots on the front panel.
2 Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the
head unit successfully, make sure that you are
placing the front panel onto the head unit correctly. Forcing the front panel into place may
result in damage to the front panel or head
unit.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns
off.
En
Use and care of the remote
control
Using the remote control
1 Point the remote control in the direction of the
front panel to operate.
When using for the first time, pull out the film
protruding from the tray.
Replacing the battery
1 Slide the tray out on the back of the remote
control.
2 Insert the battery with the plus (+) and minus
(–) poles aligned properly.
CAUTION
For safety reasons, park your vehicle when removing the front panel.
Notes
! When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay
control terminal, the vehicle’s antenna extends when this unit’s source is turned on.
To retract the antenna, turn the source off.
! If plug and play is on and either an iPhone or
iPod touch is connected, it may take time for
your source to switch. Refer to
USB plug&play (plug and play) on page 15.
! TEL (BT telephone) is available on DEHP7400HD only when a Bluetooth adapter (e.
g. CD-BTB200) is connected to the unit.
WARNING
! Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
! Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
! Use one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is
not used for a month or longer.
! There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
! Do not handle the battery with metallic tools.
! Do not store the battery with metallic objects.
! If the battery leaks, wipe the remote control
completely clean and install a new battery.
! When disposing of used batteries, comply
with governmental regulations or environmental public institutions’ rules that apply in
your country/area.
! “Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California,
U.S.A.)”
Important
! Do not store the remote control in high temperatures or direct sunlight.
! The remote control may not function properly
in direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under
the brake or accelerator pedal.
Menu operations identical
for function settings/audio
adjustments/initial settings/
lists
Returning to the previous display
Returning to the previous list/category. (the folder/
category one level higher.)
1 Press /DISP.
Turning the demo display on or off
1 Press and hold /DISP.
Returning to the ordinary display
Canceling the initial setting menu
1 Press BAND/ .
Returning to the ordinary display from the list/category
1 Press BAND/ .
Selecting a function or list
1 Turn M.C. or LEVER.
! In this manual, “Turn M.C.” is used to describe
the operation used to select a function or list.
Section
Operating this unit
Operating this unit
Tuner
HD Radioä broadcasting is high quality audio
and data services. HD Radio broadcasting is
brought to you by your local FM/AM stations.
HD Radio broadcasting features the following:
! High quality audio
! FM multicasting
! Data services
iTunesâ Tagging provides you the opportunity to discover
a wide range of content and the means to “tag” that content for later review and purchase from the iTunesâ Store.
Basic operations
23
5 6 7
Manual tuning (step by step)
1 Turn LEVER.
! When an analog station is received, tuning
down operation is conducted within the
analog broadcasting. (6 d 2)
! If a digital broadcast is not yet received,
tuning-up operation tunes in the next analog station. (2 d 6)
# Press BAND/
nary display.
or
(list) to return to the ordi-
English
About HD Radioä broadcasting
Selecting a band
1 Press BAND/ until the desired band (FM-1,
FM-2,FM-3 for FM or AM) is displayed.
02
Switching the display
Desired information can be displayed while tag
information has been broadcasting.
Selecting the desired text information
1 Press /DISP.
Frequency or program service name—song
title and artist name
Using iTunes tagging
1 TAG indicator
2 Tags transferring indicator
3 Signal reception status indicator
is disWhen digital signal is received,
played. Otherwise,
is displayed.
4 Band indicator
5 5 (stereo) indicator
6 LOC indicator
Appears when local seek tuning is on.
7 Preset number indicator
8 Signal level indicator
9 Frequency indicator
Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name,
artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.
Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original
music as well as deep cuts into traditional genre.
Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD.
Seeking
1 Turn and hold down LEVER.
! While turning and holding down LEVER,
you can skip stations. Seek tuning starts
as soon as you release LEVER.
Storing and recalling stations
for each band
1 Press
(list).
The preset screen is displayed.
2 Use M.C. to store the selected frequency
in the memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.
# You can also change the station by pressing
or
This function can be operated with the following
iPod models.
— iPod touch 4th generation
— iPod touch 3rd generation
— iPod touch 2nd generation
— iPod touch 1st generation
— iPod classic 160GB
— iPod classic 120GB
— iPod classic
— iPod nano 6th generation
— iPod nano 5th generation
— iPod nano 4th generation
— iPod nano 3rd generation
— iPhone 4
— iPhone 3GS
— iPhone 3G
— iPhone
However, tag information can be stored in this
unit even while other iPod models are used.
The song information (tag) can be saved from
the broadcasting station to your iPod. The songs
will show up in a playlist called “Tagged playlist”
in iTunes the next time you sync your iPod. Then
you can directly buy the songs you want from
the iTunes Store.
! The tagged songs and the song that you can
buy from the iTunes Store may be different.
Make sure to confirm the song before you
make the purchase.
En
Section
Operating this unit
02
Storing the tag information to this unit
1 Tune in to the broadcast station.
2 Press and hold M.C. if TAG is indicated in the
display while desired song is broadcasting.
! While storing the tag data on this unit,
TAG flashes.
Storing the tagged information to your iPod
1 Connect the iPod to this unit and transfer this
unit’s tag information to the iPod.
Function settings
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their signal strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Local (local seek tuning)
Local seek tuning lets you tune in to only those
radio stations with sufficiently strong signals for
good reception.
1 Press M.C. to select the desired setting.
FM: OFF—Level 1—Level 2—Level 3—Level
AM: OFF—Level 1—Level 2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
Operating this unit
Seek tuning setting can be changed between digital station seek (Seek HD) and all station seek
(Seek ALL) depending on the reception status.
1 Press M.C. to select your favorite setting.
Seek ALL—Seek HD
Blending (reception mode)
If a digital broadcast reception condition gets
poor, this unit automatically switches to the analog broadcast of the same frequency level. If this
function is set to on, the tuner switches between
digital broadcast and analog broadcast automatically. If this function is off, reception will be conducted within an analog broadcast.
1 Press M.C. to turn this function on or off.
Note
If Seek mode is set to Seek HD and Blending is
set to off, the tuner cannot receive broadcasts.
In this case, the seek mode or reception mode is
changed automatically as follows:
! When Seek mode is set to Seek HD, if you
switch Blending from on to off, Seek mode is
changed to Seek ALL.
! When Blending is set to off, if you switch
Seek mode from Seek ALL to Seek HD,
Blending is changed to on.
CD/CD-R/CD-RW and USB
storage devices
Basic operations
1 Bit rate/sampling frequency indicator
En
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Use a Pioneer USB cable to connect the USB
storage device to the unit.
! Plug in the USB storage device using the USB
cable.
Stopping playback of files on a USB storage device
! You may disconnect the USB storage device at
any time.
Selecting a folder
or
1 Press
Selecting a track
1 Turn LEVER.
Seek mode (seek mode)
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, depending on the software used to decode AAC
files, VBR may be displayed.
Folder number indicator
Shows the folder number currently playing
when the compressed audio is playing.
Track number indicator
PLAY/PAUSE indicator
S.Rtrv indicator
Appears when Sound Retriever function is
on.
Song time (progress bar)
Play time indicator
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Returning to root folder
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different
memory devices.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! Disconnect USB storage devices from the
unit when not in use.
Displaying text information
Selecting the desired text information
1 Press /DISP.
Notes
! Depending on the version of iTunes used to
write MP3 files to a disc or media file types,
incompatible text stored within an audio file
may be displayed incorrectly.
! Text information items that can be changed
depend on the media.
Selecting and playing files/
tracks from the name list
1 Press
(list) to switch to the file/track
name list mode.
Section
Operating this unit
Changing the file or folder name
1 Turn LEVER.
Playing
1 When a file or track is selected, press M.C.
Viewing a list of the files (or folders) in the selected folder
1 When a folder is selected, press M.C.
Playing a song in the selected folder
1 When a folder is selected, press and hold M.C.
Sound Retriever (sound retriever)
Automatically enhances compressed audio and
restores rich sound.
1 Press M.C. to select the desired setting.
1—2—OFF (off)
OFF (off)—1—2 (MIXTRAX)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Basic operations
Function settings
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Play mode (repeat play)
1 Press M.C. to select a repeat play range.
CD/CD-R/CD-RW
! Disc repeat – Repeat all tracks
! Track repeat – Repeat the current track
! Folder repeat – Repeat the current folder
USB audio player/USB memory
! All repeat – Repeat all files
! Track repeat – Repeat the current file
! Folder repeat – Repeat the current folder
Random mode (random play)
1 Press M.C. to turn random play on or off.
Pause (pause)
1 Press M.C. to pause or resume.
Notes
! The iPod cannot be turned on or off when the
control mode is set to AUDIO.
! Disconnect headphones from the iPod before connecting it to this unit.
! The iPod will turn off about two minutes after
the ignition switch is set to OFF.
Notes
! You can play playlists created with the PC application (MusicSphere). The application will
be available on our website.
! Playlists that you created with the PC application (MusicSphere) are displayed in abbreviated form.
Displaying text information
Playing songs related to the
currently playing song
Selecting the desired text information
1 Press /DISP.
iPod
Repeat indicator
Song number indicator
Shuffle indicator
PLAY/PAUSE indicator
S.Rtrv indicator
Appears when Sound Retriever function is
on.
6 Song time (progress bar)
7 Play time indicator
Playing songs on an iPod
1 Connect an iPod to the USB cable using an
iPod Dock Connector.
Selecting a track (chapter)
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Selecting an album
or
1 Press
02
Browsing for a song
You can play songs from the following lists.
• Album list of the currently playing artist
• Song list of the currently playing album
• Album list of the currently playing genre
1 Press
(list) to switch to the top menu
of the list search.
1 Press and hold M.C. to switch to link play
mode.
2 Turn M.C. to change the mode; press to
select.
Use M.C. to select a category/song.
Changing the name of the song or category
1 Turn M.C.
Playlists (playlists)—Artists (artists)—Albums
(albums)—Songs (songs)—Podcasts (podcasts)—Genres (genres)—Composers (composers)—Audiobooks (audiobooks)
Playing
1 When a song is selected, press M.C.
Viewing a list of songs in the selected category
1 When a category is selected, press M.C.
Playing a song in the selected category
1 When a category is selected, press and hold
M.C.
Searching the list by alphabet
1 When a list for the selected category is disto switch to alphabet search
played, press
mode.
2 Turn M.C. to select a letter.
3 Press M.C. to display the alphabetical list.
English
2 Use both LEVER and M.C. to select the desired file name (or folder name).
Operating this unit
! Artist – Plays an album of the artist currently
being played.
! Album – Plays a song from the album currently being played.
! Genre – Plays an album from the genre currently being played.
The selected song/album will be played after the
currently playing song.
Notes
! The selected song/album may be canceled if
you operate functions other than link search
(e.g. fast forward and reverse).
! Depending on the song selected to play, the
end of the currently playing song and the beginning of the selected song/album may be
cut off.
Operating this unit’s iPod
function from your iPod
You can listen to the sound from your iPod applications using your car’s speakers, when APP is
selected.
En
Section
Operating this unit
02
This function is not compatible with the following iPod models.
— iPod with video
— iPod nano 1st generation
APP Mode is compatible with the following iPod
models.
! iPod touch 4th generation (software version
4.1 or later)
! iPod touch 3rd generation (software version
3.0 or later)
! iPod touch 2nd generation (software version
3.0 or later)
! iPod touch 1st generation (software version
3.0 or later)
! iPod nano 6th generation (software version
1.0 or later)
! iPod nano 5th generation (software version
1.0.2 or later)
! iPhone 4 (software version 4.1 or later)
! iPhone 3GS (software version 3.0 or later)
! iPhone 3G (software version 3.0 or later)
! iPhone (software version 3.0 or later)
1 Press BAND/ to switch the control mode.
! iPod – This unit’s iPod function can be
operated from the connected iPod.
! APP – Play back the sound from your
iPod applications.
! AUDIO – This unit’s iPod function can be
operated from this unit.
Play mode (repeat play)
Sound Retriever (sound retriever)
1 Press M.C. to select a repeat play range.
! Repeat One – Repeat the current song
! Repeat All – Repeat all songs in the selected list
1 Press M.C. to select the desired setting.
1—2—OFF (off)
OFF (off)—1—2 (MIXTRAX)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Shuffle mode (shuffle)
1 Press M.C. to select your favorite setting.
! Shuffle Songs – Play back songs in the selected list in random order.
! Shuffle Albums – Play back songs from a
randomly selected album in order.
! Shuffle OFF – Cancel random play.
Shuffle all (shuffle all)
1 Press M.C. to turn shuffle all on.
To turn off, set Shuffle mode in the FUNCTION menu to off.
Link play (link play)
1 Press M.C. to display the setting mode.
2 Turn M.C. to change the mode; press to select.
For details about the settings, refer to Playing
songs related to the currently playing song on
the previous page.
Pause (pause)
Function settings
1 Press M.C. to pause or resume.
Audiobooks (audiobook speed)
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
10
Operating this unit
En
1 Press M.C. to select your favorite setting.
! Faster – Playback at a speed faster than
normal
! Normal – Playback at normal speed
! Slower – Playback at a speed slower than
normal
Notes
! Switching the control mode to iPod pauses
song playback. Operate the iPod to resume
playback.
! The following functions are still accessible
from the unit even if the control mode is set
to iPod/APP.
— Pausing
— Fast forward/reverse
— Track up/down
! When the control mode is set to iPod/APP,
only Pause or Sound Retriever is available.
! The browse function cannot be operated
from this unit.
Using Pandoraâ
IMPORTANT:
Requirements to access the Pandora music
service using the Pioneer car audio/video products:
! iPhone (first generation), iPhone 3G, iPhone 3GS,
iPhone 4G, iPod touch 1G, iPod touch 2G, iPod
touch 3G or iPod touch 4G (firmware version 3.0
or later).
Certain firmware versions for the iPod touch and
iPhone may not be compatible with the Pandora
application. If this appears to be the case, please
update the firmware to a version that is compatible with Pandora.
! Latest version of the Pandora application for the
iPhone, downloaded to your device. (Search
Apple iTunes App Store for “Pandora”).
! Current Pandora account (Free account and paid
accounts available from Pandora; create a free
account online at
http://www.pandora.com/register or through the
Pandora application for the iPhone).
! iPhone Data Plan.
Note: If the Data Plan for your iPhone does not
provide for unlimited data usage, additional
charges from your carrier may apply for accessing
the Pandora service via 3G and/or EDGE networks.
! Connection to the Internet via 3G, EDGE or Wi-Fi
network.
! Optional Pioneer adapter cable connecting your
iPhone to the Pioneer car audio/video products.
Limitations:
! Access to the Pandora service will depend on the
availability of a cellular and/or Wi-Fi network for
purposes of allowing your iPhone to connect to
the Internet.
! Pandora’s service is currently only available in
the U.S.
! Ability of the Pioneer car audio/video products to
access the Pandora service is subject to change
without notice and could be affected by any of
the following: compatibility issues with future
firmware versions of iPhones; compatibility issues with future firmware versions of the
Pandora application for the iPhone; changes to
the Pandora music service by Pandora; discontinuation of the Pandora music service by Pandora.
! Certain functionality of the Pandora service is not
available when accessing the service through the
Pioneer car audio/video products, including, but
not limited to, creating new stations, deleting stations, emailing current stations, buying tracks
from iTunes, viewing additional text information,
logging in to Pandora, and adjusting Cell Network Audio Quality.
Pandora Internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.
Section
Operating this unit
Basic operations
12
Displaying text information
Selecting the desired text information
1 Press /DISP.
Selecting and playing the
QuickMix/station list
1 Press
(list) to switch to the QuickMix/
station list mode.
Thumbs Up/Thumbs Down indicator
QuickMix indicator
PLAY/PAUSE indicator
S.Rtrv indicator
Appears when Sound Retriever function is
on.
5 Song time (progress bar)
6 Play time indicator
Playing tracks
1 Connect an iPod to the USB cable using an
iPod Dock Connector.
2 Start up the Pandora application installed on
the iPod.
2 Use M.C. to select the QuickMix or desired station.
Changing the sort order
(list).
1 Press
! ABC – You can sort the items in the list alphabetically
! DATE – You can sort the items in the list in
order of the dates on which the items were
created
Changing QuickMix or stations
1 Turn M.C.
Playing
1 When QuickMix or the station is selected,
press M.C.
Giving a Thumbs Up
to give a “Thumbs Up” for the
1 Press
track currently playing.
Function settings
Giving a Thumbs Down
to give a “Thumbs Down” for the
1 Press
track currently playing and to skip to the next
track.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
Skipping tracks
1 Turn LEVER to the right.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Press M.C. to display the main menu.
Bookmark (bookmark)
1 Press M.C. to store track information.
02
Pause (pause)
Fader/Balance (fader/balance adjustment)
1 Press M.C. to pause or resume.
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3 Turn M.C. to adjust the front/rear speaker balance.
! The front/rear speaker balance cannot be
adjusted when the rear output setting is
Rear SP :S/W. Refer to S/W control (rear
output and subwoofer setting) on page 15.
4 Turn M.C. to adjust the left/right speaker balance.
Sound Retriever (sound retriever)
1 Press M.C. to select the desired setting.
1—2—OFF (off)
OFF (off)—1—2 (MIXTRAX)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Audio adjustments
English
You can play the Pandora by connecting your
iPod which was installed the Pandora application.
Operating this unit
Preset EQ (equalizer recall)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select an equalizer curve.
Powerful—Natural—Vocal—Custom1—Custom2—Flat—Super bass
G.EQ (equalizer adjustment)
1 Audio display
Shows the audio adjustment status.
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following procedures to set the audio function.
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer curve
settings are stored in Custom1 or Custom2.
! A separate Custom1 curve can be created for
each source. If you make adjustments when a
curve other than Custom2 is selected, the
equalizer curve settings will be stored in Custom1.
! A Custom2 curve that is common for all sources can be created. If you make adjustments
when the Custom2 curve is selected, the Custom2 curve will be updated.
1 Recall the equalizer curve you want to adjust.
2 Press M.C. to display the setting mode.
3 Press M.C. to cycle between equalizer band
and level.
4 Turn M.C. to select the equalizer band to adjust.
100Hz—315Hz—1.25kHz—3.15kHz—8kHz
Turn M.C. to adjust the equalizer curve.
+6 to –6 is displayed as the equalizer curve is
increased or decreased.
En
11
Section
Operating this unit
02
Loudness (loudness)
HPF (high pass filter adjustment)
Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn loudness on or off.
3 Turn M.C. to select the desired setting.
Low (low)—Mid (mid)—High (high)
When you do not want low sounds from the subwoofer output frequency range to play from the
front or rear speakers, turn on the HPF (high pass
filter). Only frequencies higher than those in the
selected range are output from the front or rear
speakers.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn high pass filter on or off.
3 Turn M.C. to select the cut-off frequency.
50Hz—63Hz—80Hz—100Hz—125Hz
Subwoofer1 (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn subwoofer output on or off.
3 Turn M.C. to select the phase for the subwoofer output.
Turn M.C. to the left to select reverse phase,
and Reverse appears in the display. Turn M.C.
to the right to select normal phase, and Normal appears in the display.
Subwoofer2 (subwoofer adjustment)
The cut-off frequency and output level can be adjusted when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between the cut-off frequency and the output level for the subwoofer.
3 Turn M.C. to select the cut-off frequency.
50Hz—63Hz—80Hz—100Hz—125Hz
4 Turn M.C. to adjust the output level for the subwoofer.
The subwoofer level increases or decreases
each time you turn M.C. +6 to –24 is displayed
as the level is increased or decreased.
Bass Booster (bass boost)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
12
Operating this unit
En
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between sources.
! When selecting FM as the source, you cannot
switch to SLA.
! Settings are based on the FM volume level,
which remains unchanged.
! The AM volume level can also be adjusted with
this function.
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the source volume.
Adjustment range: +4 to –4
Using Bluetooth wireless
technology
! Only for DEH-P8400BH
Using Bluetooth telephone
Important
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine running can drain the battery power.
! Operations may vary depending on the kind
of cellular phone.
! Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe
place when using these advanced operations.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1 Connection
Operate the Bluetooth telephone connection
menu. Refer to Connection menu operation on
this page.
2 Function settings
Operate the Bluetooth telephone function
menu. Refer to Phone menu operation on page
14.
Basic operations
Making a phone call
! Refer to Phone menu operation on page 14.
Answering an incoming call
1 When a call is received, press M.C.
Ending a call
1 Press PHONE.
Rejecting an incoming call
1 When a call is received, press PHONE.
Answering a call waiting
1 When a call is received, press M.C.
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press PHONE.
Adjusting the other party’s listening volume
1 Turn LEVER while talking on the phone.
! When private mode is on, this function is not
available.
Turning private mode on or off
1 Press BAND/ while talking on the phone.
Switching the information display
1 Press /DISP while talking on the phone.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be available.
! The estimated call time appears in the display (this may differ slightly from the actual
call time).
Connection menu operation
Important
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing this operation.
! Connected devices may not operate properly
if more than one Bluetooth device is connected at a time (e.g. a phone and a separate
audio player are connected simultaneously).
1 Press and hold PHONE to display the connection menu.
# You cannot operate this step during a call.
2 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Section
Operating this unit
! When no device is selected in the device list,
this function is not available.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you
want to connect/disconnect.
! Press and hold M.C. to switch the
Bluetooth device address and device
name.
3 Press M.C. to connect/disconnect the selected
device.
Once the connection is established, Connected is displayed.
Delete device (deleting a device from the device
list)
! When no device is selected in the device list,
this function is not available.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you
want to delete.
! Press and hold M.C. to switch the
Bluetooth device address and device
name.
3 Press M.C. to display Delete YES.
4 Press M.C. to delete a device information from
the device list.
! While this function is in use, do not turn off
the engine.
Add device (connecting a new device)
1 Press M.C. to start searching.
! To cancel, press M.C. while searching.
! If this unit fails to find any available cellular
phones, Not found is displayed.
2 Turn M.C. to select a device from the device
list.
! Press and hold M.C. to switch the
Bluetooth device address and device
name.
3 Press M.C. to connect the selected device.
! To complete the connection, check the device name (Pioneer BT Unit). Enter the
PIN code on your device if necessary.
! PIN code is set to 0000 as the default. You
can change this code.
! 6-digit number appears on the display of
this unit. Once the connection is established, this number disappears.
! If you are unable to complete the connection using this unit, use the device to connect to the unit.
! If three devices are already paired, Device
Full is displayed and it is not possible to
perform this operation. In this case, delete
a paired device first.
Special device (setting a special device)
Bluetooth devices that are difficult to establish a
connection with are called special devices. If your
Bluetooth device is listed as a special device, select the appropriate one.
1 Press M.C. to display the setting mode.
! If three devices are already paired, Device
Full is displayed and it is not possible to
perform this operation. In this case, delete
a paired device first.
2 Turn M.C. to display a special device. Press to
select.
3 Turn M.C. to display this unit’s device name,
Bluetooth device address and PIN code.
4 Use a device to connect to this unit.
! To complete the connection, check the device name (Pioneer BT Unit) and enter the
PIN code on your device.
! PIN code is set to 0000 as the default. You
can change this code.
Auto connect (connecting to a Bluetooth device
automatically)
1 Press M.C. to turn automatic connection on or
off.
Visibility (setting the visibility of this unit)
To check the availability of this unit from other devices, Bluetooth visibility of this unit can be turned
on.
1 Press M.C. to turn the visibility of this unit on
or off.
! While setting Special device, Bluetooth
visibility of this unit is turned on temporarily.
Pin code input (PIN code input)
02
To connect your device to this unit via Bluetooth
wireless technology, you need to enter a PIN code
on your device to verify the connection. The default
code is 0000, but you can change it with this function.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select a number.
3 Press M.C. to move the cursor to the next position.
4 After inputting PIN code, press and hold M.C.
! After inputting, pressing M.C. returns you
to the PIN code input display, and you can
change the PIN code.
English
Device list (connecting or disconnecting a device
from the device list)
Operating this unit
Device INFO (Bluetooth device address display)
1 Press M.C. to display the setting mode.
2 Turn M.C. left to switch to the Bluetooth device
address.
Turning M.C. right returns to the device name.
Bluetooth Audio
! Only for DEH-P8400BH
Important
! Depending on the Bluetooth audio player
connected to this unit, the available operations will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on your
audio player.
— AVRCP profile (Audio/Video Remote Control
Profile): You can perform playback, pause
playback, select songs, etc.
! Since there are a number of Bluetooth audio
players available on the market, available operations will vary extensively. When operating
your player with this unit, refer to the instruction manual that came with your Bluetooth
audio player as well as this manual.
En
13
Section
Operating this unit
02
! Information related to a song (such as the
elapsed playing time, song title, song index,
etc.) cannot be displayed on this unit.
! As the signal from your cellular phone may
cause noise, avoid using it when you are listening to songs on your Bluetooth audio
player.
! When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the
Bluetooth audio player connected to this unit
is muted.
! When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
! Playback continues even if you switch from
your Bluetooth audio player to another
source while listening to a song.
Setting up for Bluetooth audio
Before you can use the Bluetooth audio function
you must set up the unit for use with your
Bluetooth audio player. This entails establishing
a Bluetooth wireless connection between this
unit and your Bluetooth audio player, and pairing your Bluetooth audio player with this unit.
Operating this unit
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Selecting a track
1 Turn LEVER.
Starting playback
1 Press BAND/ .
Function settings
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Play (play)
1 Press M.C. to start playback.
Stop (stop)
1 Press M.C. to stop the playback.
Pause (pause)
Basic operations
1 Press M.C. to turn pause on.
Phone menu operation
! Only for DEH-P8400BH
1 Device name
Shows the device name of the connected
Bluetooth audio player.
14
En
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
Press PHONE to display the phone menu.
2 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Missed calls (missed call history)
Dialed calls (dialed call history)
Received calls (received call history)
Press M.C. to display the phone number list.
Turn M.C. to select a name or phone number.
Press M.C. to make a call.
To display details about the contact you selected, press and hold M.C.
PhoneBook (phone book)
! The phone book in your cellular phone will be
transferred automatically when the phone is
connected to this unit.
! Depending on the cellular phone, the phone
book may not be transferred automatically. In
this case, operate your cellular phone to transfer the phone book. The visibility of this unit
should be on. Refer to Visibility (setting the
visibility of this unit) on the previous page.
1 Press M.C. to display SEARCH (alphabetical
list).
2 Turn M.C. to select the first letter of the name
you are looking for.
! Press and hold M.C. to select the desired
character type.
3 Press M.C. to display a registered name list.
4 Turn M.C. to select the name you are looking
for.
5 Press M.C. to display the phone number list.
6 Turn M.C. to select a phone number you want
to call.
7 Press M.C. to make a call.
Phone Function (phone function)
You can set Auto answer, Ring tone and PH.B.
Name view from this menu. For details, refer to
Function and operation on this page.
Function and operation
1 Display Phone Function.
Refer to Phone Function (phone function) on
this page.
Press M.C. to display the function menu.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Auto answer (automatic answering)
1 Press M.C. to turn automatic answering on or
off.
Ring tone (ring tone select)
1 Press M.C. to turn the ring tone on or off.
PH.B.Name view (phone book name view)
1 Press M.C. to switch between the lists of
names.
Initial settings
1 Function display
! Shows the function status.
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. and hold until the initial setting menu appears in the display.
Section
Operating this unit
1 Press M.C. to select the segment of the clock
display you wish to set.
Hour—Minute
2 Turn M.C. to adjust the clock.
If the front panel is not detached from the head
unit within four seconds of turning off the ignition,
a warning tone sounds. You can turn off the warning tone.
1 Press M.C. to turn the warning tone on or off.
This unit’s rear output (rear speaker leads output
and RCA rear output) can be used for full-range
speaker (Rear SP :F.Range) or subwoofer (Rear
SP :S/W) connection. If you switch the rear output
setting to Rear SP :S/W, you can connect a rear
speaker lead directly to a subwoofer without using
an auxiliary amp.
1 Press M.C. to switch the rear output setting.
! When no subwoofer is connected to the
rear output, select Rear SP :F.Range (fullrange speaker).
! When a subwoofer is connected to the rear
output, select Rear SP :S/W (subwoofer).
! Even if you change this setting, there will be
no output unless you turn the subwoofer output on (refer to Subwoofer1 (subwoofer on/off
setting) on page 12).
! If you change this setting, subwoofer output in
the audio menu will return to the factory settings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this setting.
EngineTime alert (elapsed time display setting)
AUX1/AUX2 (auxiliary input setting)
Demonstration (demo display setting)
This setting allows you to measure the length of
time that elapses from when the machine is
turned on and display the amount of elapsed time
per set period.
Also, you will hear alarm.
1 Press M.C. to select your favorite setting.
OFF—15Minutes—30Minutes
Activate this setting when using an auxiliary device connected to this unit.
1 Press M.C. to turn auxiliary setting on or off.
1 Press M.C. to turn the demo display on or off.
Dimmer (dimmer setting)
When ever scroll is set to ON, recorded text information scrolls continuously in the display. Set to
OFF if you prefer the information to scroll just
once.
1 Press M.C. to turn the ever scroll on or off.
Language select (multi-language)
For your convenience, this unit equips multiple
language display. You can select the language
best suited to your first language.
1 Press M.C. to select the language.
English—Français—Español
Calendar (setting the date)
1 Press M.C. to select the segment of the calendar display you wish to set.
Year—Day—Month
2 Turn M.C. to set the date.
Clock (setting the clock)
USB plug&play (plug and play)
This setting allows you to switch your source to
USB/iPod/Pandora automatically.
1 Press M.C. to turn the plug and play function
on or off.
! ON – When a USB storage device/iPod is
connected, depending on the type of device, the source is automatically switched
to USB/iPod/Pandora when you turn on
the engine. If you disconnect your USB
storage device/iPod, this unit’s source is
turned off.
! OFF – When USB storage device/iPod is
connected, the source is not switched to
USB/iPod/Pandora automatically. Please
change the source to USB/iPod/Pandora
manually.
Warning tone (warning tone setting)
To prevent the display from being too bright at
night, the display is automatically dimmed when
the car’s headlights are turned on. You can turn
the dimmer on or off.
1 Press M.C. to turn dimmer on or off.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
S/W control (rear output and subwoofer setting)
Ever-scroll (scroll mode setting)
02
Clear memory (resetting the Bluetooth wireless
technology module)
! This function is not available for DEH-P7400HD.
Bluetooth device data can be deleted. To protect
personal information, we recommend deleting
this data before transferring the unit to other persons. The following settings will be deleted.
! phone book entries on the Bluetooth telephone
! preset numbers on the Bluetooth telephone
! registration assignment of the Bluetooth telephone
! call history of the Bluetooth telephone
! information of the connected Bluetooth telephone
! PIN code of the Bluetooth device
1 Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, turn
M.C. to display CANCEL and press to select.
2 Press M.C. to clear the memory.
Cleared is displayed and the settings are deleted.
! While this function is in use, do not turn
off the engine.
English
3 Turn M.C. to select the initial setting.
After selecting, perform the following procedures to set the initial setting.
Operating this unit
Pin code input (PIN code input)
BT AUDIO (Bluetooth audio activation)
! This function is available on the DEH-P7400HD
only when a Bluetooth adapter (e.g. CD-BTB200)
is connected to the device.
You need to activate the BT Audio source in order
to use a Bluetooth audio player.
1 Press M.C. to turn the BT Audio source on or
off.
En
15
Section
Operating this unit
02
! This function is not available for DEH-P8400BH.
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to enter a
PIN code on your phone to verify the connection.
The default code is 0000, but you can change it
with this function.
With some Bluetooth audio players, you may be
required to enter the Bluetooth audio player PIN
code in advance to set this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is connected to this unit.
1 Turn M.C. to select a number.
2 Press M.C. to move the cursor to the previous
or next position.
3 After entering the PIN code (up to eight digits),
press and hold down M.C.
The PIN code can be stored in the memory.
! Pressing M.C. again on the same display
returns you to the PIN code input display to
allow you to change the PIN code.
BT Version info. (Bluetooth version display)
! This function is available on the DEH-P7400HD
only when a Bluetooth adapter (e.g. CD-BTB200)
is connected to the device.
You can display the system versions of this unit
and of Bluetooth module.
1 Press M.C. to display the information.
! Turning M.C. or LEVER cycles between the
system version of this unit and that of the
Bluetooth module.
Operating this unit
S/W UPDATE (updating the software)
! This function is not available for DEH-P7400HD.
This function is used to update this unit with the
latest software. For information on the software
and updating, refer to our website.
! Never turn the unit off while the software is
being updated.
1 Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updating the software.
AUX2 source:
Basic operations
When connecting an auxiliary device using an IPBUS-RCA Interconnector (sold separately)
The functions allocated to the following operations will differ depending on the connected external unit. For details concerning these
functions, refer to the owner’s manual for the
connected external unit.
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately) to
connect this unit to an auxiliary device featuring RCA output.
For more details, refer to the IP-BUS-RCA Interconnector owner’s manual.
This auxiliary device is automatically set to
AUX2.
% Press BAND/ .
% Press and hold BAND/ .
% Turn LEVER.
# This type of connection can only be made if the
auxiliary device has RCA outputs.
% Turn and hold down LEVER.
Using an AUX source
Selecting AUX as the source
% Press
Up to two auxiliary devices such as VCR or portable devices (sold separately) can be connected
to this unit. When connected, auxiliary devices
are automatically read as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained
below.
% Press SRC/OFF to select AUX as the
source.
Other functions
About AUX1 and AUX2
There are two methods to connect auxiliary devices to this unit.
AUX1 source:
When connecting auxiliary device using a stereo
mini plug cable
% Insert the stereo mini plug into the AUX
input jack.
For more details, refer to the installation manual.
This auxiliary device is automatically set to
AUX1.
# AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX1/
AUX2 (auxiliary input setting) on the previous page.
Using an external unit
An external unit refers to a Pioneer product,
such as those which will be available in the future. Although incompatible as a source, the
basic functions of up to two external units can
be controlled with this unit. When two external
units are connected, the external units are automatically allocated to external unit 1 or external
unit 2.
The basic operations of the external unit are explained below. The allocated functions will differ
depending on the connected external unit. For
details concerning these functions, refer to the
owner’s manual for the external unit.
Selecting the external unit as the source
% Press SRC/OFF to select EXT as the source.
or
Using the functions allocated to 1 to
6 keys
Press
(list).
2 Use M.C. to select Key 1 to Key 6.
Turn to change Key 1 to Key 6 and press.
Advanced operations
Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
Function1 (function 1)—Function2 (function 2)
—Function3 (function 3)—Function4 (function
4)—Auto/Manual (auto/manual)
Press M.C. to select the desired setting.
Using different entertainment
displays
You can enjoy entertainment displays while listening to each sound source.
16
En
Section
Operating this unit
Operating this unit
Turn M.C. to select the function.
MIXTRAX technology is used to add a variety of
sound effects between songs for arranging the
pauses between songs. It allows you to enjoy listening to music nonstop.
Press M.C. to display the MIXTRAX.
Connecting the currently playing song and the
next song together with sound effects
1 Press MIX to turn the MIXTRAX function on or
off.
! This function is available only when a file on a
USB storage device or a song on an iPod is
being played.
! This function is not available when the control
mode is set to iPod/APP.
! Depending on the file/song, sound effects may
not be enabled for adding.
! When the MIXTRAX function is turned on, the
Sound Retriever setting is turned off. Refer to
Sound Retriever (sound retriever) on page 10.
Note
MIXTRAX includes a MIXTRAX Illumination feature that when switched on changes the illuminated colors in time with the audio track. If you
find the feature distracting while driving, please
return MIXTRAX Illumination to the default setting of “OFF”.
Switching the display background
according to the type of music
This function is available only when the MIXTRAX function is on. Refer to Connecting the currently playing song and the next song together
with sound effects on this page.
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ENTERTAINMENT.
5 Turn M.C. to change the display.
MIXTRAX—OFF
! When MIXTRAX is selected, the illumination
colors selected in Flashing Color are displayed.
! When OFF is selected, the illumination color
selected for the Background is displayed.
# You can switch the function by pressing CLOCK
(DEH-P7400HD only).
2 Turn M.C. to change the menu option
and press to select ILLUMI.
Selecting the illumination color
3 Turn M.C. to display Key and press to select.
This unit is equipped with multiple-color illumination. You can select desired colors for the keys
and display of this unit. You also can customize
the colors you want to use.
2 Turn M.C. to change the menu option
and press to select ENTERTAINMENT.
Turn M.C. to select the function.
Press M.C. to display the Background.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
Press M.C. to display the main menu.
5 Turn M.C. to change the display.
Background visual—genre—background picture 1—background picture 2—background picture 3—background picture 4—simple display—
movie screen —calendar
# Genre display changes depending on the genre
of music.
# Genre display may not operate correctly depending on the application used to encode audio files.
Press M.C. to display the main menu.
3 Turn M.C. to display Flashing Color and
press to select.
4 Turn M.C. to select the illumination color.
You can select one option from the following list.
! Changing the color according to the type of
music played (You can select from Color 1 to
Color 6 and Random.)
! Changing the color according to the level of
low sounds played (You can select from
Color 1 to Color 6 and Random.)
! OFF (No change.)
Turning the clock display on or off
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ENTERTAINMENT.
Selecting the key color from the
illumination color list
You can select desired colors for the keys of this
unit.
Turn M.C. to select the function.
4 Press M.C. to select the desired setting.
Clock display—elapsed time display—clock off
4 Turn M.C. to select the illumination color.
You can select one option from the following list.
Selecting the flashing color from the
illumination color list
You can change colors for the keys and display
of this unit according to the type of music.
! This function is available only when the MIXTRAX function is on. Refer to Connecting the
currently playing song and the next song together with sound effects on this page.
Switching the display indication
Press M.C. to display the main menu.
English
Advanced operations using the MIX
(MIXTRAX) button
02
30 preset colors (WHITE to ROSE)
SCAN (cycle through all colors)
3 sets of colors (WARM, AMBIENT, CALM)
CUSTOM (customized illumination color)
Notes
! When SCAN is selected, the system automatically cycles through the 30 preset colors.
! When WARM is selected, the system automatically cycles through the warm colors.
! When AMBIENT is selected, the system automatically cycles through the ambient colors.
! When CALM is selected, the system automatically cycles through the calm colors.
! When CUSTOM is selected, the customized
color saved is selected.
Selecting the display color from the
illumination color list
You can select the desired colors for the display
of this unit.
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to switch to Display and press
to select.
4 Turn M.C. to select the illumination color.
You can select one option from the following list.
! 30 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
En
17
Section
Operating this unit
02
Available accessories
03
! 3 sets of colors (WARM, AMBIENT, CALM)
! CUSTOM (customized illumination color)
3 Turn M.C. to display Key or Display. Press
to select.
Note
For details about colors on the list, refer to Selecting the key color from the illumination color
list on the previous page.
4 Press M.C. and hold until the customizing
illumination color setting appears in the display.
Selecting key and display color from
the illumination color list
You can select the desired colors for the keys
and display of this unit.
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 10 for all three of
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
other colors.
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key & Display and
press to select.
4 Turn M.C. to select the illumination color.
You can select one option from the following list.
! 30 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
Notes
! You cannot select CUSTOM in this function.
! Once you select a color in this function, colors on the keys and display of this unit automatically switch to the color you selected.
! For details about colors on the list, refer to
Selecting the key color from the illumination
color list on the previous page.
Customizing the illumination color
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
18
5 Press M.C. to select the primary color.
R (red)—G (green)—B (blue)
En
Notes
! You cannot create a custom illumination
color when SCAN or a set of colors (WARM,
AMBIENT, or CALM) is selected.
! You can create custom illumination colors
for both Key and Display.
Switching the display indication
and button illumination
Display indication and button illumination can
be switched on or off.
% Press and hold MIX.
Pressing and holding MIX switches the display
indication and button illumination on or off.
# Even if the display indication is turned off, operation can be conducted. If operation is conducted
while the display indication is off, display will light
up for a few seconds and then turn off again.
Bluetooth Audio
Basic operations
! Only for DEH-P7400HD
If you connect a Bluetooth adapter (e.g. CDBTB200) to this unit, you can control Bluetooth
audio players via Bluetooth wireless technology.
! In some countries, CD-BTB200 is not sold on
the market.
Important
! Depending on the Bluetooth audio player
connected to this unit, the available operations will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on your
audio player.
— AVRCP profile (Audio/Video Remote Control
Profile): You can perform playback, pause
playback, select songs, etc.
! Operations may vary depending on the kind
of a Bluetooth audio player.
! Refer to the instruction manual that came
with your Bluetooth audio player as well as
this manual while operating your player on
this unit.
! Information related to a song (such as the
elapsed playing time, song title, song index,
etc.) cannot be displayed on this unit.
! As the signal from your cellular phone may
cause noise, avoid using it when you are listening to songs on your Bluetooth audio
player.
! When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the
Bluetooth audio player connected to this unit
is muted.
! Playback continues even if you switch from
your Bluetooth audio player to another
source while listening to a song.
1 Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
Selecting a track
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Notes
! For details concerning operation, refer to the
Bluetooth adapter’s operation manual.
! Even though your audio player does not contain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless technology. To control your audio player using
this unit, connect a product featuring
Bluetooth wireless technology (available on
the market) to your audio player and connect
the Bluetooth adapter (e.g. CD-BTB200) to
this unit.
Function settings
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Section
Available accessories
! This function cannot be operated when a
Bluetooth audio player has already been connected.
1 Press M.C. to open the connection.
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
! If your Bluetooth audio player is set ready
for Bluetooth wireless connection, connection to this unit is automatically established.
! If your player requires a PIN code to establish a connection, look for the code on the
player or in its accompanying documentation. Refer to Pin code input (PIN code
input) on page 15.
! This function cannot be operated when a
Bluetooth audio player is not connected.
! This function cannot be operated when a
Bluetooth audio player is connected via A2DP.
1 Press M.C. to stop the playback.
Pause (pause)
! This function cannot be operated when a
Bluetooth audio player is not connected.
! This function cannot be operated when a
Bluetooth audio player is connected via A2DP.
1 Press M.C. to pause or resume.
Device info. (Bluetooth device address display)
1 Press M.C. to display the information.
! Pressing M.C. toggles Bluetooth device
and address display on/off.
Disconnect audio (Bluetooth audio player disconnection)
Bluetooth telephone
! This function cannot be operated when a
Bluetooth audio player is not connected.
1 Press M.C. to disconnect the Bluetooth audio
player.
Disconnected is displayed. The Bluetooth
audio player is now disconnected from this
unit.
! Only for DEH-P7400HD
If you use a Bluetooth adapter (e.g. CD-BTB200),
you can connect a cellular phone featuring
Bluetooth wireless technology to this unit for
hands-free, wireless calls, even while driving.
! In some countries, CD-BTB200 is not sold on
the market.
Play (song playback)
Basic operations
! This function cannot be operated when a
Bluetooth audio player is not connected.
! This function cannot be operated when a
Bluetooth audio player is connected via A2DP.
1 Press M.C. to start playback.
Stop (stop playback)
2 3 4
1 Device name
Shows the device name of the cellular
phone.
2 Signal level indicator
! The level shown on the indicator may differ from the actual signal level.
3 User number indicator
4 Battery strength indicator
! The level shown on the indicator may differ from the actual battery strength.
! If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
5 Calendar display
Shows the day, month and year (if connected
with a phone).
6 Clock display
Shows the time (if connected with a phone).
7 Automatic answering/Automatic rejecting indicator
Shows AUTO when the automatic answering
function is on (for more details, refer to
Auto answer (automatic answering) on page
22).
Shows REFUSE when the automatic rejecting
function is on (for more details, refer to
Refuse calls (automatic rejecting) on page
22).
8 Incoming call notice
Indicates that an incoming call has been received and has not been checked yet.
! Not displayed for calls made when your
cellular phone is disconnected from this
unit.
03
Notes
! The equalizer curve for the phone source is
fixed.
! When selecting the phone source, you can
only operate Fader/Balance (balance adjustment) in the audio menu.
English
Connection open (Bluetooth audio player connection)
Available accessories
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this unit
and your phone, registering your phone with
this unit, and adjusting the volume level.
Important
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine running can drain the battery power.
! Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe
place when using these advanced operations.
En
19
Section
Available accessories
03
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless technology, see following section. Function and operation on this page.
! To make best use of the technology, we recommend you register the phone to this
unit.
2 Registration
To register your temporarily connected phone,
refer to Set phone (registering a connected cellular phone) on the next page.
3 Volume adjustment
Adjust the earpiece volume of your cellular
phone to your preference. The unit will record
the adjusted volume level as the default setting.
! The volume of the caller’s voice and ring
tone may vary depending on the type of
cellular phone.
! If there is a large volume difference between the ring tone and caller’s voice, the
overall volume level may become unstable.
! Make sure to adjust the volume to a proper
level before disconnecting the cellular
phone from the unit. If the volume is
muted (zero level) on your cellular phone,
the volume level of your cellular phone remains muted even after the cellular phone
is disconnected.
20
En
Available accessories
Making a phone call
Voice recognition
1 Press BAND/ and hold until Voice dial appears in the display.
Voice dial appears in the display. When Voice
dial ON is displayed, voice recognition function is now ready.
! If your cellular phone does not feature
voice recognition function, No voice dial
appears in the display and operation is not
possible.
2 Say the name of your contact aloud.
Taking a phone call
Answering or rejecting an incoming call
Answering an incoming call
1 When a call is received, press M.C.
! You can also operate this function by turning LEVER to the right.
Ending a call
1 Turn LEVER to the left.
Rejecting an incoming call
1 When you receive a call, turn LEVER to the
left.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be available.
! The estimated call time appears in the display (this may differ slightly from the actual
call time).
Operating a call waiting
Answering a call waiting
1 When a call is received, press M.C.
! You can also operate this function by turning LEVER to the right.
Ending all calls
1 Turn LEVER to the left.
Switching between callers on hold
1 Press M.C.
! You can also operate this function by turning LEVER to the right.
Canceling call waiting
1 Turn LEVER to the left.
Notes
! Turn LEVER left to end all calls including
calls waiting on the line.
! To end the call, both you and the other caller
must hang up your phones.
Function and operation
Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Search&Connect (searching for available cellular
phone)
! This function cannot be operated when a cellular phone is connected.
1 Press M.C. to select the function.
2 Press M.C. to search for available cellular
phones.
While searching, Searching flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name not found (if names cannot be obtained) is displayed.
! If this unit fails to find any available cellular
phones, Not found is displayed.
3 Turn M.C. to select the name of the device you
want to connect.
4 Press M.C. to connect the selected cellular
phone.
While connecting, Connecting flashes. To
complete the connection, check the device
name (Pioneer BT Unit) and enter the link
code on your cellular phone. If the connection
is established, Connected is displayed.
! PIN code is set to 0000 as the default. You
can change this code. Refer to
Pin code input (PIN code input) on page
15.
Connection open (connecting from cellular
phone)
! This function cannot be operated when a cellular phone is connected.
1 Press M.C. to open the connection.
Disconnect phone (disconnecting a cellular
phone)
Section
Available accessories
Connect phone (connecting a registered cellular
phone)
! This function cannot be operated when a cellular phone is connected.
1 Press M.C. to select the function.
2 Turn M.C. to select a pairing assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
! If the assignment is empty, No data is displayed and operation is not possible.
3 Press M.C. to connect the selected cellular
phone.
While connecting, Connecting is displayed.
After the connection is completed, Connected
is displayed.
Set phone (registering a connected cellular
phone)
! This function cannot be operated when the cellular phone is not connected or already connected and registered.
1 Press M.C. to select the function.
2 Turn M.C. to select a pairing assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
! As you select each assignment, you can
see whether or not a phone is already registered. If the assignment is empty, No data
is displayed. If the assignment is already
taken, the device name appears. To replace
an assignment with a new phone, first delete the current assignment. Refer to
Delete device (deleting a registered cellular
phone).
3 Press M.C. to register the currently connected
phone.
When registration is completed, Reg.Completed is displayed.
! If the registration fails, Reg.ERROR is displayed. In this case, return to step 1 and try
again.
Delete device (deleting a registered cellular
phone)
1 Press M.C. to select the function.
2 Turn M.C. to select a pairing assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
! If the assignment is empty, No data is displayed and operation is not possible.
3 Select the desired pairing assignment and
press M.C.
Delete YES is displayed. Deleting phone is
now on standby.
4 Press M.C. to delete the phone.
After the phone is deleted, Deleted is displayed.
PH.B.Transfer (transferring entries to the phone
book)
The Phone Book can hold a total of 500 entries.
300 from User 1, 150 from User 2, and 50 from
User 3.
1 Press M.C. to enter the phone book transfer
standby mode.
Transfer YES appears in the display.
2 Press M.C. to show the confirmation display.
Transfer -/- appears in the display.
3 Use the cellular phone to perform phone book
transfer.
Perform phone book transfer using the cellular
phone. For detailed instructions, refer to the instruction manual that came with your cellular
phone.
! The display indicates how many entries
have been transferred and the total number
to be transferred.
4 Data transferred is displayed and phone book
transfer is completed.
PH.B.Name view (changing the phone book display order)
! This function cannot be operated when the cellular phone is not connected or not registered.
! This function cannot be operated when the
registered guest phone is used.
! This function cannot be operated when a
Bluetooth telephone is connected via HSP
(head set profile).
1 Press M.C. to change the name view order.
Inverted is displayed and the name view order
is changed.
Pressing M.C. repeatedly changes the name
view order between first and last name.
03
! This function cannot be operated when the cellular phone is not connected or not registered.
! This function cannot be operated when a
Bluetooth telephone is connected via HSP
(head set profile).
1 Press M.C. to select the function.
2 Turn M.C. to select an item.
PhoneBook (phone book)—Missed calls
(missed call history)—Dialed calls (dialled
call history)—Received calls (received call history)—Dial preset (preset phone numbers)—
All clear (delete all memory)
! If you want to clear all the Phone Book, dialled/received/missed call history list and
preset phone number, select All clear.
! If guest phone is connected to this unit via
Bluetooth wireless technology, PhoneBook cannot be selected.
3 Press M.C. to the right to select the item that
you want to delete from this unit.
Clear memory YES is displayed. Clearing
memory is now on standby.
4 Press M.C. to clear the memory.
Cleared is displayed and data on the selected
item is cleared from this unit’s memory.
English
! This function cannot be operated when the cellular phone is not connected.
1 Press M.C. to disconnect a cellular phone
from this unit.
After disconnection is completed, Disconnected is displayed.
Available accessories
Number dial (making a call by entering phone
number)
Clear memory (clearing memory)
En
21
Section
Available accessories
03
! This function cannot be operated when the cellular phone is not connected.
! This function cannot be operated when a
Bluetooth telephone is connected via HSP
(head set profile).
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
1 Press M.C. to select the function.
2 Turn M.C. to select a number.
3 Press M.C. to move the cursor to the previous
or next position.
Up to 24 digits can be entered.
4 When you finish entering the number, press
M.C.
5 Press M.C. to make a call.
6 To end the call, turn LEVER to the left.
Refuse calls (automatic rejecting)
! This function cannot be operated when a
Bluetooth telephone is connected via HSP
(head set profile).
1 Press M.C. to turn automatic call rejection on
or off.
Auto answer (automatic answering)
1 Press M.C. to turn automatic answering on or
off.
Ring tone (ring tone select)
1 Press M.C. to turn the ring tone on or off.
Auto connect (automatic connection to a phone)
1 Press M.C. to turn automatic connection on or
off.
If your cellular phone is ready for Bluetooth
wireless connection, connection to this unit is
automatically established.
Echo cancel (echo cancel and noise reduction)
1 Press M.C. to turn echo canceling on or off.
22
En
Available accessories
Device info. (Bluetooth device address display)
1 Press M.C. to select the function.
2 Press M.C. to display the information.
! Pressing M.C. toggles Bluetooth device address and device name on/off.
Using the phone book
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
After finding the number you want to call in the
phone book, you can select the entry and make
the call.
1 Press
(list) to display the Phone Book.
Phone book—Missed call—Dialled call—Received call
2 Turn M.C. to select the first letter of the
name you are looking for.
3 Press M.C. to display entries.
The first three Phone Book entries starting with
that letter (e.g. “Ben”, “Brian” and “Burt” when
“B” is selected) will be displayed.
4 Turn M.C. to select a phone book entry
you want to call.
5 Press M.C. to display the detailed list for
the selected entry.
The phone number, name and genre (if assigned) of entries are displayed in the detailed
list.
# If several phone numbers are included in an
entry, select one by turning M.C.
# Turn M.C. if you want to go back and select another entry.
6 Use M.C. to control the following functions.
Perform the following procedures to set the
function.
Calling a number in the phone book
1 Press M.C. to make a call.
2 To end the call, turn LEVER to the left.
Editing phone numbers
You can edit the numbers of Phone Book entries.
Each phone number can be up to 24 digits long.
1 Press and hold M.C. to display the number
input screen.
2 Turn M.C. to move the cursor to the number
you want to change.
3 Turn and hold down M.C. to change numbers.
4 Press M.C. to store the new number.
Clearing a phone book entry
1 Press and hold M.C. to display the number
input screen.
2 Turn M.C. to switch to the clear memory
screen.
Edit number (number input screen)—Clear
memory (clear memory screen)
3 Press M.C. to pull up the confirmation display.
Clear memory YES is displayed.
4 Press M.C. to delete the Phone Book entry.
Cleared is displayed.
The Phone Book entry is deleted. The display
returns to Phone Book entry list.
Using the call history
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
The 12 most recent calls made (dialled), received
and missed, are stored in the call history. You
can browse the call history and call numbers
from it.
1 Press
(list) to display the list.
Phone book—Missed call—Dialled call—Received call
# If no phone numbers are stored in the selected
list, No data is displayed.
2 Turn M.C. to select a phone number.
Turning M.C. to change the phone numbers
stored in the list.
# If the phone number is already in the phone
book, the corresponding name is displayed.
3 Press M.C. to display the detailed list.
Name and phone number are displayed in the
detailed list.
# If the number is already in the Phone Book then
the name is also displayed.
# Turning M.C. switches to the previous or next
phone number displayed in the detailed list.
Press M.C. to make a call.
# For an international call, press and hold M.C. to
add + to the phone number.
To end the call, turn LEVER to the left.
XM tuner
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold separately.
! With this unit, you can operate two additional
functions: XM channel direct selection and
preset channel list.
Section
Available accessories
Basic operations
3 4
XM band indicator
XM channel number indicator
XM preset number indicator
XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is displayed when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.
Storing and recalling broadcast
stations
Selecting a channel from a
channel category
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Switch the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on this page.
(list).
1 Press
Preset screen is displayed.
2 Push
or
channel category.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
Displaying the Radio ID
Function and operation
Press M.C. to display the main menu.
Turn LEVER to select RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# RADIO ID and the ID codes are repeatedly displayed one after the other.
SIRIUS Satellite Radio tuner
Select an XM band.
1 Press BAND/ .
! Band can be selected from XM-1, XM-2 or
XM-3.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Select a channel.
1 Turn LEVER.
! By turning and holding down LEVER, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a desired channel category. (Refer to Selecting
a channel from a channel category on this
page.)
Channel mode (channel select mode setting)
Switching the XM display
1 Press /DISP.
3 Turn LEVER to select the desired channel
from the selected channel category.
# You can also change the station by pushing
or
or turning LEVER.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
You have two methods for selecting a channel: by
number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select setting)—Category (channel category select setting)
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satellite
Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation manual. This manual provides information on these
points. For all other information on using the
SIRIUS tuner, please refer to the SIRIUS operation manual.
3 4
to select the desired
1 Select the channel select settings to
Channel number.
Refer to Channel mode (channel select mode
setting) on this page.
03
English
For details concerning operation, refer to the XM
tuner’s operation manuals. This section provides information on XM operations with this
unit which differs from that described in the XM
tuner’s operation manual.
Available accessories
SIRIUS band indicator
SIRIUS channel number indicator
SIRIUS preset number indicator
SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is displayed when Category is selected.
I.R is displayed during the Instant Replay
mode.
5 SIRIUS channel name
Shows the channel name of broadcast channel.
Select a SIRIUS band.
1 Press BAND/ .
! Band can be selected from SR-1, SR-2 or
SR-3.
Select a channel.
1 Turn LEVER.
! By turning and holding down LEVER, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a desired channel category. (Refer to Selecting
a channel from a channel category on the
next page.)
En
23
Section
Available accessories
03
Switching the SIRIUS display
1 Press /DISP.
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
! The play time is displayed during Instant
Replay mode. Refer to Using the Instant
Replay function on this page.
! Play time display indicates the time inverted from the live broadcast. The play
time is displayed as a negative number.
Displaying the Radio ID
1 Turn LEVER to select CH 000.
! To select CH 000, set the channel select setting to Channel number. About the channel
select setting, refer to Channel mode (channel
select mode setting) on this page.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to a SIRIUS tuner or select a channel.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press
(list).
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected station has been stored in memory.
24
En
Available accessories
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
or
or turning LEVER.
Function and operation
Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select setting)—Category (channel category select setting)
Game alert (game alert setting)
This system can alert you when games involving
your favorite teams are about to start. To use this
function you need to set up a game alert for the
teams in advance.
! To use this function, a Pioneer SIRIUS bus interface (e.g. CD-SB10) is required.
! To use this function, a SIRIUS plug-and-play
unit with a Game Alert Function is required.
! For details, refer to the SIRIUS plug-and-play
unit’s manuals.
! You can also operate this function when a SIRPNR2 is connected to this unit.
! The Game Alert function is on at the default
setting.
! Once you select the teams, you need to turn
the Game Alert function on.
1 Press M.C. to turn the Game Alert on or off.
! When a game of the selected team is about to
start (or is currently playing) on a different station, Game alert info is displayed. Press and
hold M.C. to switch to that station, and you
can listen to that game.
Team setting (team setting)
Press M.C. to select the function.
Turn M.C. to select a desired league.
Turn M.C. to select a desired team.
Press M.C. to store the selected team in memory.
The game alert function is activated for that
team.
5 Repeat these steps to select other teams.
! When FULL is displayed, additional teams
cannot be selected. In this case, first delete
a selected team and then try again.
Game info (game information)
If any games of the selected teams are currently
playing, you can display information on the games
and tune in to the broadcast channel.
You can display information on the games while
enjoying the sound from the station you are currently tuned in to. You can also tune in to the
broadcast channel when you wish to.
1 Press M.C. to select the function.
2 Turn M.C. to select a game.
! The game score will be updated automatically.
3 Press M.C. to switch to the other station and
listen to the game.
! If you have not selected any teams, NOT SET is
displayed.
! When games involving your favorite teams are
not currently playing, NO GAME is displayed.
Pause (pause)
During the Instant Replay mode, you can select
Pause (pause). Refer to Using the Instant Replay
function on this page.
1 Press M.C. to pause or resume.
Selecting a channel from a
channel category
1 Select the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on this page.
or
2 Push
channel category.
to select the desired
3 Turn LEVER to select the desired channel
from the selected channel category.
Using the Instant Replay function
The following functions can be operated in Instant Replay mode.
Section
Available accessories
Installation
03
04
Fast forward or reverse
1 Turn and hold down LEVER for about one second and then release.
Ground wire
Other devices
(Another electronic
device in the car)
POWER AMP
Metal parts of car’s body
Important
! When installing this unit in a vehicle without
an ACC (accessory) position on the ignition
switch, failure to connect the red cable to the
terminal that detects operation of the ignition
key may result in battery drain.
OF
Select a track
1 Turn LEVER.
WARNING
! Use speakers over 50 W (output value) and
between 4 W to 8 W (impedance value). Do
not use 1 W to 3 W speakers for this unit.
! The black cable is ground. When installing
this unit or power amp (sold separately),
make sure to connect the ground wire first.
Ensure that the ground wire is properly connected to metal parts of the car’s body. The
ground wire of the power amp and the one of
this unit or any other device must be connected to the car separately with different
screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction.
ACC position
STAR
Using Instant Replay mode
1 When SIRIUS tuner is selected as the source,
press and hold BAND/ .
! When BAND/ is pressed, instant replay
mode is canceled.
! When another source is selected, instant
replay mode is canceled.
Connections
No ACC position
! Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
! To prevent a short-circuit, overheating or malfunction, be sure to follow the directions
below.
English
! To use this function, a Pioneer SIRIUS bus interface (e.g. CD-SB10) is required.
! To use this function, a SIRIUS plug-and-play
unit with an Instant Replay Function is required.
! For details, refer to the SIRIUS plug-and-play
unit’s manuals.
— Disconnect the negative terminal of the battery before installation.
— Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring
that comes into contact with metal parts to
protect the wiring.
— Place all cables away from moving parts,
such as the shift lever and seat rails.
— Place all cables away from hot places, such
as near the heater outlet.
— Do not connect the yellow cable to the battery
by passing it through the hole to the engine
compartment.
— Cover any disconnected cable connectors
with insulating tape.
— Do not shorten any cables.
— Never cut the insulation of the power cable of
this unit in order to share the power with
other devices. The current capacity of the
cable is limited.
— Use a fuse of the rating prescribed.
— Never wire the negative speaker cable directly
to ground.
— Never band together negative cables of multiple speakers.
! When this unit is on, control signals are sent
through the blue/white cable. Connect this
cable to the system remote control of an external power amp or the vehicle’s auto-antenna relay control terminal (max. 300 mA
12 V DC). If the vehicle is equipped with a
glass antenna, connect it to the antenna
booster power supply terminal.
! Never connect the blue/white cable to the
power terminal of an external power amp.
Also, never connect it to the power terminal
of the auto antenna. Doing so may result in
battery drain or a malfunction.
En
25
Section
Installation
04
Installation
This unit

Perform these connections when not connecting a rear speaker lead to a subwoofer.
Power cord
3 45
67
9 a







1 USB port
2 Antenna input
15 cm (5-7/8 in.)
3 IP-BUS input (blue)
4 Fuse (10 A)
5 Power cord input
6 Wired remote input
Hard-wired remote control adaptor can be
connected (sold separately).
7 Microphone input (DEH-P8400BH only)
8 Microphone (DEH-P8400BH only)
4 m (13 ft. 1 in.)
9 Rear output
a Front output
b Subwoofer output
c USB cable
1.5 m (4 ft. 11 in.)
d IP-BUS cable (sold separately)
e Pioneer IP-BUS accessories (sold separately)
En
Perform these connections when using a subwoofer without the optional amplifier.



SW

26





To power cord input
Left
Right
Front speaker
Rear speaker
White
White/black
Gray

Gray/black
Green
Green/black
Violet
Violet/black
Black (chassis ground)
Connect to a clean, paint-free metal location.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition
switch (12 V DC).
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).
Orange/white
Connect to lighting switch terminal.
Subwoofer (4 W)
When using a subwoofer of 70 W (2 W), be
sure to connect the subwoofer to the violet
and violet/black leads of this unit. Do not
connect anything to the green and green/
black leads.
Not used.
Subwoofer (4 W)× 2
Notes
! With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
! Change the initial setting of this unit. Refer
to S/W control (rear output and subwoofer
setting) on page 15.
The subwoofer output of this unit is monaural.
Power amp (sold separately)
Perform these connections when using the optional amplifier.












1 System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3 Connect with RCA cables (sold separately)
4 To Rear output
5 Rear speaker
6 To Front output
7 Front speaker
8 To subwoofer output
9 Subwoofer
Installation
Important
! Check all connections and systems before
final installation.
! Do not use unauthorized parts as this may
cause malfunctions.
! Consult your dealer if installation requires
drilling of holes or other modifications to the
vehicle.
! Do not install this unit where:
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result
of a sudden stop.
Section
Installation
Installation
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs (90°) into
place.
Tighten two screws on each side.
1 Dashboard
2 Mounting sleeve
Install the unit as illustrated.
5 cm
Screw
Mounting bracket
Dashboard or console
Use either truss (5 mm × 8 mm) or flush surface (5 mm × 9 mm) screws, depending on
the bracket screw holes.
Removing the unit
Remove the trim ring.
Leave ample
5 cm
space
DIN front/rear mount
This unit can be properly installed using either
front-mount or rear-mount installation.
Use commercially available parts when installing.
You can remove the front panel to protect your
unit from theft.
Press the detach button and push the front
panel upward and pull it toward you.
For details, refer to Removing the front panel to
protect your unit from theft and Re-attaching the
front panel on page 6.
The front panel can be secured with the supplied screw.
1 Nut
2 Firewall or metal support
3 Metal strap
4 Screw
5 Screw (M4 × 8)
# Make sure that the unit is installed securely in
place. An unstable installation may cause skipping
or other malfunctions.
DIN Front-mount
1 Insert the mounting sleeve into the dashboard.
For installation in shallow spaces, use the supplied mounting sleeve. If there is enough space,
use the mounting sleeve that came with the vehicle.
Removing and re-attaching the
front panel
Securing the front panel
5cm
cm
Pull the unit out of the dashboard.
60°
! When installing, to ensure proper heat dispersal when using this unit, make sure you
leave ample space behind the rear panel and
wrap any loose cables so they are not blocking the vents.
English
! The semiconductor laser will be damaged if
it overheats. Install this unit away from hot
places such as near the heater outlet.
! Optimum performance is obtained when the
unit is installed at an angle of less than 60°.
04
DIN Rear-mount
1 Determine the appropriate position
where the holes on the bracket and the side
of the unit match.
1 Trim ring
2 Notched tab
! Releasing the front panel allows easier access to the trim ring.
! When reattaching the trim ring, point the
side with the notched tab down.
1 Screw
2 Insert the supplied extraction keys into
both sides of the unit until they click into
place.
En
27
Section
Installation
04
Installation
Installing the microphone
2 Install the microphone clip on the steering column.
! Only for DEH-P8400BH
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the
unit in such a way that it will not obstruct driving.
Note
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system.
1 Microphone clip
2 Clamp
When installing the microphone
on the sun visor
When installing the microphone
on the steering column
1 Install the microphone on the microphone clip.
1 Install the microphone on the microphone clip.
1 Double-sided tape
2 Install the microphone clip on the rear side of
the steering column.
3 Clamp
1 Microphone
2 Microphone clip
2 Install the microphone clip on the sun
visor.
With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
28
En
1 Microphone
2 Microphone base
3 Microphone clip
4 Fit the microphone lead into the groove.
# Microphone can be installed without using microphone clip. In this case, detach the microphone
base from the microphone clip. To detach the microphone base from the microphone clip, slide the microphone base.
Adjusting the microphone angle
The microphone angle can be adjusted.
Appendix
Additional information
Troubleshooting
Symptom
Cause
Action
You did not perform any operation within
about 30 seconds.
Perform operation
again.
The repeat
play range
changes unexpectedly.
Depending on
Select the repeat
the repeat play play range again.
range, the selected range
may change
when another
folder or track is
being selected
or during fast
forwarding/reversing.
A subfolder is Subfolders can- Select another renot played
not be played
peat play range.
back.
when Folder repeat (folder repeat) is
selected.
The display
screen
changes at
random.
There is no embedded text information.
Switch the display
or play another
track/file.
No text informa- ! Switch the
tion can be ob- broadcast station.
tained
! Operate this
unit in areas with
get good reception condition.
Demo mode is
on.
! Press and hold
/DISP to cancel
demo mode.
! Turn off the
demo display setting.
Action
Symptom
Cause
Action
Symptom
Cause
Action
Demo mode is
The display
on.
screen
changes at
random instead of displaying the
clock continuously even
with the clock
display turned
on.
Cause
! Press and hold
/DISP to cancel
demo mode.
! Turn off the
demo display setting.
The sound
from the
Bluetooth
audio source
is not played
back.
There is a call in
progress on a
Bluetooth connected cellular
phone.
The sound will be
played back when
the call is terminated.
Sound from
the iPod cannot be heard.
Use the iPod to
change the audio
output direction.
A Bluetooth
connected cellular phone is
currently being
operated.
Do not operate
the cellular phone
at this time.
The audio output direction
may switch automatically
when the
Bluetooth and
USB connections are used
at the same
time.
The display
screen
changes at
random even
with the display off
turned on.
Demo mode is
on.
! Press and hold
/DISP to cancel
demo mode.
! Turn off the
demo display setting.
Reconnect the
Bluetooth connection between
this unit and the
cellular phone.
The unit is
malfunctioning.
There is interference.
You are using a
device, such as
a cellular
phone, that
transmits electric waves near
the unit.
A call was
made with a
Bluetooth connected cellular
phone and then
immediately terminated. As a
result, communication between this unit
and the cellular
phone was not
terminated
properly.
Move electrical
devices that may
be causing the interference away
from the unit.
English
Symptom
The display
automatically
returns to the
ordinary display.
NO XXXX appears when a
display is
changed (NO
TITLE, for example).
Additional information
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the error
message.
CD player
Message
Cause
Action
ERROR-07,
The disc is dirty. Clean the disc.
11, 12, 17, 30 The disc is
Replace the disc.
scratched.
Text information cannot
be scrolled.
Wait until it
Display scrollwarms back up.
ing is stopped
automatically
when the temperature around
this unit is 50°F
or less.
ERROR-10,
11, 12, 15,
17, 30, A0
There is an elec- Turn the ignition
trical or meswitch OFF and
chanical error.
back ON, or
switch to a different source, then
back to the CD
player.
Movie playback is
stopped and
the simple
display appears.
Movie playback Wait until it
is stopped auto- warms back up.
matically when
the temperature
around this unit
is 50°F or less.
ERROR-15
The inserted
disc is blank.
Replace the disc.
ERROR-23
Unsupported
CD format.
Replace the disc.
En
29
Appendix
Additional information
Message
Cause
Action
Message
Cause
Action
Message
Cause
Action
Message
Cause
FORMAT
READ
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disappears and you
hear sound.
NO AUDIO
There are no
songs.
Transfer the audio
files to the USB
storage device
and connect.
CHECK USB
The USB connector or USB
cable has shortcircuited.
ERROR-19
The inserted
disc does not
contain any
playable files.
Replace the disc.
The connected
USB storage device has security enabled.
Follow the USB
storage device instructions to disable the security.
Check that the
USB connector or
USB cable is not
caught in something or damaged.
SKIPPED
SKIPPED
The inserted
disc contains
DRM protected
files.
Replace the disc.
The connected
USB storage device contains
files embedded
with Windows
Mediaä DRM 9/
10.
Play an audio file
not embedded
with Windows
Media DRM 9/10.
The connected
USB storage device consumes
more than
500 mA (maximum allowable
current).
PROTECT
All the files on
the inserted
disc are embedded with
DRM.
Replace the disc.
PROTECT
All the files in
the USB storage
device are embedded with
Windows Media
DRM 9/10.
Transfer audio
files not embedded with
Windows Media
DRM 9/10 to the
USB storage device and connect.
Disconnect the
USB storage device and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
The iPod operates correctly
but does not
charge.
NOT COMPATIBLE
The USB device
connected to is
not supported
by this unit.
! Connect a USB
Mass Storage
Class compliant
device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
Make sure the
connection cable
for the iPod has
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or disconnect the iPod
and reconnect.
Communication ! Perform one of
failed.
the following operations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage device.
–Change to a different source.
Then, return to
the USB source.
! Disconnect the
cable from the
iPod. Once the
iPod’s main
menu is displayed, reconnect
the iPod and reset
it.
NO AUDIO
USB storage device/iPod
30
Additional information
Message
Cause
Action
NO DEVICE
When plug and
play is off, no
USB storage device or iPod is
connected.
! Turn the plug
and play on.
! Connect a compatible USB storage device/iPod.
FORMAT
READ
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disappears and you
hear sound.
En
Non-compatible Disconnect your
iPod
device and replace it with a
compatible iPod.
ERROR-23
Action
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod’s main
menu is displayed, reconnect
the iPod and reset
it.
USB storage device was not formatted with
FAT12, FAT16 or
FAT32.
USB storage device should be formatted with
FAT12, FAT16 or
FAT32.
Appendix
Additional information
Cause
Action
ERROR-16
The iPod firmware version is
old.
Update the iPod
version.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod’s main
menu is displayed, reconnect
the iPod and reset
it.
STOP
Not found
There are no
songs in the
current list.
Select a list that
contains songs.
No related
songs.
Transfer songs to
the iPod.
Pandora
Cause
ERROR-19
Communication Disconnect the
failed.
cable from the
iPod. Once the
iPod’s main
menu is displayed, reconnect
the iPod and reset
it.
Message
Cause
Action
ERROR-10
The power failed
for the
Bluetooth module of this unit.
Turn the ignition
switch OFF and
then to ACC or
ON.
If the error message is still displayed after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Action
Start up the
Pandora Application
The Pandora application has
not started running yet.
Try again
later
Unable to save Try again later.
thumb rating.
Unable to save
BookMark.
Pandora system
is undergoing
maintenance.
Skip limit
reached
Skip limit
reached.
Do not exceed the
skip limit.
Check Application
This version of
the Pandora application is not
supported.
Connect an iPod/
iPhone that has a
compatible version of the
Pandora application installed.
Bluetooth device
Action
Do not attach labels, write on or apply chemicals
to the surface of the discs.
No Available No station
Station
found.
Create a station
in the Pandora
application on
your iPod/iPhone.
To clean a CD, wipe the disc with a soft cloth outward from the center.
No Active
Stations
Select a station.
Message
Message
Check Device Device error
message displayed in
Pandora Application.
Unable to play
music from
Pandora.
Start up the
Pandora application from your
iPod/iPhone.
Please check your
iPod/iPhone.
Cause
No station selected.
Handling guidelines
Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
English
Message
Additional information
Condensation may temporarily impair the player’s
performance. Let it rest for about one hour to adjust to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded application, playback environment, storage conditions,
and so on.
Road shocks may interrupt disc playback.
When using discs that can be printed on label surfaces, check the instructions and the warnings of
the discs. Depending on the discs, inserting and
ejecting may not be possible. Using such discs
may result in damage to this equipment.
Do not attach commercially available labels or
other materials to the discs.
! The discs may warp making the disc unplayable.
! The labels may come off during playback and
prevent ejection of the discs, which may result
in damage to the equipment.
USB storage device
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player.
Connections via USB hub are not supported.
Do not connect anything other than a USB storage device.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
En
31
Appendix
Additional information
Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Depending on the USB storage device, the following problems may occur.
! Operations may vary.
! The storage device may not be recognized.
! Files may not be played back properly.
! The device may generate noise in the radio.
iPod
To ensure proper operation, connect the dock connector cable from the iPod directly to this unit.
Additional information
Frequent loading and ejecting of a DualDisc may
result in scratches on the disc. Serious scratches
can lead to playback problems on this unit. In
some cases, a DualDisc may become stuck in the
disc loading slot and will not eject. To prevent this,
we recommend you refrain from using DualDisc
with this unit.
Please refer to the information from the disc manufacturer for more detailed information about
DualDiscs.
CAUTION
Do not leave discs, a USB storage device, or an
iPod in any place that is subject to high temperatures.
M3u playlist: Not compatible
MP3i (MP3 interactive), mp3 PRO: Not compatible
WAV
File extension: .wav
Quantization bits: 8 and 16 (LPCM), 4 (MS
ADPCM)
Sampling frequency: 16 kHz to 48 kHz (LPCM),
22.05 kHz and 44.1 kHz (MS ADPCM)
AAC
Disc
Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers).
Playable folders: up to 99
Playable files: up to 999
File system: ISO 9660 Level 1 and 2, Romeo, Joliet
Multi-session playback: Compatible
Packet write data transfer: Not compatible
Regardless of the length of blank sections between the songs from the original recording, compressed audio discs play with a short pause
between songs.
Compatible format: AAC encoded by iTunes
Firmly secure the iPod when driving. Do not let the
iPod fall onto the floor, where it may become
jammed under the brake or accelerator pedal.
About iPod settings
! When an iPod is connected, this unit changes
the EQ (equalizer) setting of the iPod to off in
order to optimize the acoustics. When you disconnect the iPod, the EQ returns to the original
setting.
! You cannot set Repeat to off on the iPod when
using this unit. Repeat is automatically
changed to All when the iPod is connected to
this unit.
Incompatible text saved on the iPod will not be displayed by the unit.
File extension: .m4a
WMA
Transmission rate: 16 kbps to 320 kbps, VBR
Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers).
Apple Lossless: Not compatible
Playable folders: up to 1 500
AAC file bought from the iTunes Store (.m4p file
extension): Not compatible
Playable files: up to 15 000
DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable
DVD for video on the other.
Since the CD side of DualDiscs is not physically
compatible with the general CD standard, it may
not be possible to play the CD side with this unit.
32
En
Sampling frequency: 11.025 kHz to 48 kHz
File extension: .wma
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to
384 kbps (VBR)
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Windows Media Audio Professional, Lossless,
Voice/DRM Stream/Stream with video: Not compatible
MP3
DualDiscs
USB storage device
Compressed audio
compatibility (disc, USB)
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz (32 kHz,
44.1 kHz, 48 kHz for emphasis)
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4
(ID3 tag Version 2.x is given priority over Version
1.x.)
Supplemental information
Only the first 32 characters can be displayed as a
file name (including the file extension) or a folder
name.
Playback of copyright-protected files: Not compatible
Partitioned USB storage device: Only the first partition can be played.
There may be a slight delay when starting playback of audio files on a USB storage device with
numerous folder hierarchies.
This unit may not operate correctly depending on
the application used to encode WMA files.
There may be a slight delay at the start of playback
of audio files embedded with image data or audio
files stored on a USB storage device that has numerous folder hierarchies.
CAUTION
! Pioneer accepts no responsibility for data
lost on the USB storage device even if that
data is lost while using this unit.
Appendix
Additional information
iPod compatibility
This unit supports only the following iPod models.
Supported iPod software versions are shown
below. Older versions may not be supported.
Made for
! iPod touch 4th generation (software version
4.1)
! iPod touch 3rd generation (software version
3.1.1)
! iPod touch 2nd generation (software version
2.1.1)
! iPod touch 1st generation (software version
1.1)
! iPod classic 160GB (software version 2.0.2)
! iPod classic 120GB (software version 2.0)
! iPod classic (software version 1.0)
! iPod with video (software version 1.2.3)
! iPod nano 6th generation (software version
1.0)
! iPod nano 5th generation (software version
1.0.1)
! iPod nano 4th generation (software version
1.0)
! iPod nano 3rd generation (software version
1.0)
! iPod nano 2nd generation (software version
1.1.3)
! iPod nano 1st generation (software version
1.3.1)
! iPhone 4 (software version 4.1)
! iPhone 3GS (software version 3.0)
! iPhone 3G (software version 2.0)
! iPhone (software version 1.1.1)
Depending on the generation or version of the
iPod, some functions may not be available.
Operations may vary depending on the software
version of iPod.
When using an iPod, an iPod Dock Connector to
USB Cable is required.
A Pioneer CD-IU51 interface cable is also available. For details, consult your dealer.
About the file/format compatibility, refer to the
iPod manuals.
Audiobook, Podcast: Compatible
To specify the playback sequence, the following
method is recommended.
1 Create a file name that includes numbers
that specify the playback sequence (e.g.,
001xxx.mp3 and 099yyy.mp3).
2 Put those files into a folder.
3 Save the folder containing files on the USB
storage device.
However, depending on the system environment,
you may not be able to specify the playback sequence.
For USB portable audio players, the sequence is
different and depends on the player.
CAUTION
Pioneer accepts no responsibility for data lost
on the iPod, even if that data is lost while this
unit is used.
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
Example of a hierarchy
01
02
03
04
05
Level 1 Level 2 Level 3 Level 4
: Folder
: Compressed
audio file
01 to 05: Folder
number
1 to 6: Playback
sequence
Bluetooth profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This unit is compatible with the following
profiles.
! GAP (Generic Access Profile)
! SDP (Service Discovery Protocol)
! OPP (Object Push Profile)
! HFP (Hands Free Profile)
! HSP (Head Set Profile)
! PBAP (Phone Book Access Profile)
! A2DP (Advanced Audio Distribution Profile)
! AVP (Audio/Video Profile)
! AVRCP (Audio/Video Remote Control Profile)
1.0
Copyright and trademark
Bluetooth
â
Disc
Folder selection sequence or other operation
may differ depending on the encoding or writing
software.
USB storage device
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by PIONEER CORPORATION is under license. Other trademarks
and trade names are those of their respective
owners.
iTunes
Apple and iTunes are trademarks of Apple Inc.,
registered in the U.S. and other countries.
MP3
English
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on
media players, smart phones, or other devices while using this product.
Additional information
Supply of this product only conveys a license for
private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating)
real time broadcasting (terrestrial, satellite,
cable and/or any other media), broadcasting/
streaming via internet, intranets and/or other
networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for
such use is required. For details, please visit
http://www.mp3licensing.com.
WMA
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
iPod & iPhone
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is
not responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod or iPhone may affect wireless
performance.
Playback sequence is the same as recorded sequence in the USB storage device.
En
33
Appendix
Additional information
HD Radioä Technology
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S.
and Foreign Patents. HD Radioä and the HD,
HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.
SAT Radio
The SAT RADIO READY mark indicates that the
Satellite Radio Tuner for Pioneer (i.e., XM tuner
and Sirius satellite tuner which are sold separately) can be controlled by this unit. Please inquire to your dealer or nearest authorized
Pioneer service station regarding the satellite
radio tuner that can be connected to this unit.
For satellite radio tuner operation, please refer to
the satellite radio tuner owner’s manual.
! Everything worth listening to is on SiriusXM,
getting over 130 channels, including the
most commercial-free music, plus the best
sports, news, talk and entertainment. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit
“http://www.siriusxm.com”
! Sirius, XM, SAT Radio Ready and all related
logos and marks are trademarks of Sirius XM
Radio, Inc. All rights reserved.
Pandora
Pandora is a registered trademark of Pandora
Media, Inc.
MIXTRAX
MIXTRAX is a trademark of the PIONEER CORPORATION.
34
En
Additional information
Specifications
General
Power source ................... 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system ............ Negative type
Maximum current consumption
................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis .............. 178 mm × 50 mm ×
165 mm
(7 in. × 2 in. × 6-1/2 in.)
Nose .................. 188 mm × 58 mm ×
18 mm
(7-3/8 in.× 2-1/4 in.× 3/4 in.)
Chassis .............. 178 mm × 50 mm ×
165 mm
(7 in.× 2 in.× 6-1/2 in.)
Nose .................. 170 mm × 46 mm ×
18 mm
(6-3/4 in.× 1-3/4 in.× 3/4 in.)
Weight ............................. 1.2 kg (2.6 lbs)
Audio
Maximum power output ... 50 W × 4
50 W × 2/4 W + 70 W × 1/2 W
(for subwoofer)
Continuous power output
................................... 22 W × 4 (50 Hz to 15 000 Hz,
5 % THD, 4 W load, both channels driven)
Load impedance .............. 4 W to 8 W × 4
4 W to 8 W × 2 + 2 W × 1
Preout maximum output level
................................... 4.0 V
Equalizer (5-Band Graphic Equalizer):
Frequency ................. 100 Hz/315 Hz/1.25 kHz/
3.15 kHz/8 kHz
Gain ......................... ±12 dB
HPF:
Frequency ................. 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope ........................ –12 dB/oct
Subwoofer (mono):
Frequency ................. 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope ........................ –18 dB/oct
Gain ......................... +6 dB to –24 dB
Phase ....................... Normal/Reverse
Bass boost:
Gain ......................... +12 dB to 0 dB
CD player
System ............................
Usable discs ....................
Signal-to-noise ratio .........
Number of channels ........
MP3 decoding format ......
WMA decoding format .....
Compact disc audio system
Compact disc
94 dB (1 kHz) (IHF-A network)
2 (stereo)
MPEG-1 & 2 Audio Layer 3
Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch
audio)
(Windows Media Player)
AAC decoding format ....... MPEG-4 AAC (iTunes encoded
only) (.m4a)
(Ver. 9.2 and earlier)
WAV signal format ........... Linear PCM & MS ADPCM
(Non-compressed)
USB
USB standard specification
................................... USB 2.0 full speed
Maximum current supply
................................... 1 A
USB Class ....................... MSC (Mass Storage Class)
File system ....................... FAT12, FAT16, FAT32
MP3 decoding format ...... MPEG-1 & 2 Audio Layer 3
WMA decoding format ..... Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch
audio)
(Windows Media Player)
AAC decoding format ....... MPEG-4 AAC (iTunes encoded
only) (.m4a)
(Ver. 9.2 and earlier)
WAV signal format ........... Linear PCM & MS ADPCM
(Non-compressed)
FM tuner
Frequency range .............. 87.9 MHz to 107.9 MHz
Usable sensitivity ............. 9 dBf (0.8 µV/75 W, mono, S/N:
30 dB)
Signal-to-noise ratio ......... 80 dB (digital broadcasting)
(IHF-A network)
Signal-to-noise ratio ......... 72 dB (analog broadcasting)
(IHF-A network)
Appendix
Additional information
AM tuner
English
Frequency range .............. 530 kHz to 1 710 kHz
Usable sensitivity ............. 25 µV (S/N: 20 dB)
Signal-to-noise ratio ......... 80 dB (digital broadcasting)
(IHF-A network)
Signal-to-noise ratio ......... 62 dB (analog broadcasting)
(IHF-A network)
Bluetooth (DEH-P8400BH only)
Version ............................ Bluetooth 3.0 certified
Output power ................... +4 dBm Maximum
(Power class 2)
CEA2006 Specifications
Power output ................... 14 W RMS × 4 Channels (4 W
and ≦ 1 % THD+N)
S/N ratio .......................... 91 dBA (reference: 1 W into
4 W)
Note
Specifications and the design are subject to
modifications without notice.
En
35
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
台北市內湖區瑞光路407號8樓
電話： (02) 2657-3588
先鋒電子（香港）有限公司
香港九龍長沙灣道909號5樓
電話： (0852) 2848-6488
ã 2011 PIONEER CORPORATION. All rights reserved.
ã 2011 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.
 <11I00000>
Printed in China
Imprimé en Chine
 UC

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Page Mode                       : UseThumbs
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2011:09:15 23:18:08Z
Modify Date                     : 2011:10:24 12:08:11+09:00
Metadata Date                   : 2011:10:24 12:08:11+09:00
Creator Tool                    : Arbortext Advanced Print Publisher 9.1.520/W Unicode
Format                          : application/pdf
Creator                         : 
Document ID                     : uuid:fed7cec2-4623-4550-94c6-bd7f862d2349
Instance ID                     : uuid:fccf89bd-1e2a-41e2-9543-faefc8ab5848
Has XFA                         : No
Page Count                      : 36
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools