Pixel Enterprise ROOK-RF-508 Wireless flash trigger User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1962935
Application ID	DbYskI3nxukNiR+4NYIk9w==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	120.42kB (1505208 bits)
Date Submitted	2013-05-13 00:00:00
Date Available	2013-05-13 00:00:00
Creation Date	2013-05-13 10:05:38
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2013-05-13 02:05:43
Document Title	user manual.pdf
Document Creator	Adobe Acrobat 10.0.0
Document Author:	Wendy_Jiang

button
Light
button
Light
for Nikon
compartment
6 Battery
for Olympus/
Panasonic
for Sony
Nikon series camera, Samsung series camera
Fujifilm series camera, Pantex series camera
Sony series camera, Minolta series camera
Olympus/Panasonic series camera
For Nikon
For Sony
for Olympus/
Panasonic
Qriginal speedlite,
studio light,Metz,
SUNPAK,Sigma
Above brand name is registered by the respective owner.
Canon series camera
Transmitter(TX)
Receiver(RX)
8 Chanel setting
Trigger point
For Canon
Model
4 Output socket
2 Shutter release/test 3 Group Indicate 4 Power/group setting
ROOK Model compatible list as below：
Compatible
for Canon
socket
5 Input/output
1 Indicator
Transmitter
screw
6 Hot shoe foot with 7 Chanel setting
Light
compartment
5 Battery
Power/group
switch
2 Shutter release/test 3
1 Indicator
Receiver
Professional
e s sionall Flash
F a sh
Fla
h Trigger
Tr
ROOK
OK
Instruction Manual
FSK2.4GHz
up to 200m
1/200S
3 difference group (7 combinations)
Receiver : 250 hours
Transmitter: 5years
AAA x2
Transmitter 48.5g (without batter y)
Receiver 44.0g (without batter y)
Hot shoe protector
Receiver holder
Please check the package and make sure the below items are
already in the box. If there's missed anything, please contact with the
distributor directly.
ROOK Transmitter
1pc
ROOK Receiver
1pc
Receiver holder:
1pc
Hot shoe protector:
2pc
Manual:
1pc
Included Items
Power :
Weight:
Wireless Frequency System:
Operating Distance:
Shutter Sync Speed:
Group setting:
Wireless Channel:
Stand-by Time：
Specification
5、Available to control the shooting or through master camera to control
slave camera.
(Sync time may have little bit inacurracy as difference camera model )
4、Through studio light to connect PC or USB socket, the sync speed up to 1/320s
3、Wake-up function available, the flash will be wake up automatically.
2、Transmitter hot shoe support TTL and sync with off shoe flash.
1、ROOK is a professional grouping flash trigger.
Feature
10、Because of this product is included battery ; please strictly follow the instruction
for operation . Otherwise its may cause an explosion, fire or personal injury.
or fire.
9、Do not use flammable gases in violation of this warning may cause an explosion
immersed in water or exposed to rain, and this may lead to not work properly.
6、When the product connected to the device, Do not pull the wires.
7、Do not put it in high temperature, such as a closed car under direct sunlight, the
control panel and other high - temperature areas .
8、keep dry, do not use wet hand contact with the product, the product must not be
corrosive liquids, heat or explosion.
5、The batteries should not install anti-polarity ; otherwise the batteries may leak .
power and remove the battery.
1、Make sure the camera is powered off before install device.
2、This is electronic products accessories ; some of the environment causes may
affect the working . However this is hardly ever to get this situation , don ' t worry !
3、This component can't be strong vibration, or may lead to product failure.
4、For a long time non-use, please turned off the transmitter and the receiver's
Cautions before use
Thank you so much for purchasing PIXEL product, ROOK is a professional
grouping flash trigger. TTL mode available on transmitter hot shoe and sync with off
shoe trigger together. Off shoe trigger can be grouped the flash and Remote the
camera. ROOK is using global free FSK 2.4GHz which is more stabilize.
Overview
Please locate the battery according
to the icon in the battery compartment.
Channel Setting:
CH4
CH1
CH3
CH2
CH1
Transmitter
CH3
Receiver
→
→
B、
→ A、
3. Check the group setting of transmitter and receiver.
2. Check the frequency of transmitter and receiver.
1. Check power on or off.
Testing:
*Receiver only get signal from transmitter when the current group
setting of receiver is included in the validate group of transmitter.
Put Power/group switch at A/B/C,
and then turn on the receivers.
Group setting on receiver
* A、B、C LED light on means the current setting will be working with
transmitter.
4. No action within 2 seconds, the group LED light will off.
B → A、
C → B、
C →
A、
B、
C → A、
1.wake up group display, and show the current controlling group. Slightly press
] to show group mode which showing the current working group.
2. Press again [
] to change group.
3. Group changin g a s :
Group setting on transmitter
Group setting:
CH1
Receiver
CH1
Transmitter
* Transmitter and receiver must be set as the same channel.
CH1→ CH2→ CH3→CH4 (as figure)
1.Slide the switch to change channel.
2.Channel changing as:
Set transmitter and receiver to the
same channel
Switch [Power/group switch] to OFF; the receiver power is off,
and the light stop blinking.
Switch [Power/group switch] to A or B or C to turn on receiver
power; the receiver will be stayed in the current group and the
LED light blink as red every 2 seconds.
For a long time non-use, please turned off the transmitter and the receiver's
power and remove the battery.
(Turn
power off)
(Turn
power on)
Transmitter:
Hold [
] 2 seconds to turn on transmitter, then group LED light on
for 2 seconds, and show which current light. It can be used trigger the
flash and control shutter. You could turn off power by pressing [
2 seconds again, then [LED light] blink red three times.Then power off.
Receiver:
Turn power on/off:
Battery Installation:
Set transmitter and receiver to the same channel
Prepare to use
AAA +
AAA +
(1
(2
the studio light as figure.
1. Unlock the Speedlite Flash locking screw.
speedlite on receiver.
(1
Connect Receiver to Camera
1.Plug shutter connecting
cable (3.5mm side) into the
receiver socket.
2.Plug shutter connecting
cable ( camera side ) into
the camera shutter release
socket .
(2
3. According to the flash locking method to lock the
as figure.
2. Insert the Speedlite Flash into the receiver hot shoe
Connect the Receiver to Speedlite Flash
Connect the Receiver to Studio Light
5.Insert another side into the studio light socket.
4. Plug 3.5mm side into the transmitter input.
3. Use 3.5-3.5 or 3.5-1/2 according to studio light socket.
2. Mount the receiver on the receiver holder.
*The shutter cable should be purchased separately.
1. Split the protecting film on the receiver holder and stick it on
*PC-3.5 connecting cable should be purchased separately.
Connect transmitter to camera via PC-3.5 connecting cable.
1. Plug PC-3.5 connecting cable to transmitter 3.5mm socket.
2. Plug PC-3.5 connecting cable to camera PC socket.
（Transmitter）
Connect the transmitter to camera hot shoe
left to lock.
3. Tight the Hot shoe with screw, and then turn
2. Plug the transmitter on the camera hot shoe.
release.
1. Tight the Hot shoe with screw, and then turn right to
How to connect the relative photo equipment
2.Full press the test button
3.Trigger the Flash.
1.Insert flashgun on the receiver and turn on the flash power; set the flash
index as minimum.
Testing the receiver signal as below:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 1
Create Date                     : 2013:05:13 10:05:38+08:00
Title                           : user manual.pdf
Producer                        : GPL Ghostscript 8.64
Author                          : Wendy_Jiang
Creator                         : Adobe Acrobat 10.0.0
Modify Date                     : 2013:05:13 02:05:43Z

EXIF Metadata provided by EXIF.tools