Pixel Enterprise ROOK-RF-508 Wireless flash trigger User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1962936
Application ID	DbYskI3nxukNiR+4NYIk9w==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	185.23kB (2315435 bits)
Date Submitted	2013-05-13 00:00:00
Date Available	2013-05-13 00:00:00
Creation Date	2013-05-13 10:06:15
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2013-05-13 02:06:21
Document Title	user manual.pdf
Document Creator	Adobe Acrobat 10.0.0
Document Author:	Wendy_Jiang

Figure Explaination
10
Speedlite flash TTL + Speedlite flash trigger remote control
Speedlite flash TTL + Studio light off-camera flash trigger remote control
Speedlite flash TTL + off-camera flash trigger remote control
The transmitter supports the Speedlite flash and will not hamper TTL
communication of camera. Furthermore, it will send the sync signal and
trigger the off-camera flashgun meanwhile.
d l i te flash
fl h TTL
L + Speedlite
dli flash trigger remote control
Speedlite
Speedlite flash TTL + Studio light off-camera flash trigger remote control
By using of the TTL off-camera cable to trigger the off-camera flash when
the Speedlite TTL flash works.
Speedlite flash TTL + Speedlite flash trigger remote control
11
OFF
ON
Camera on top TTL, PC off-camera sync trigger.
12
Transmitter Speedlite TTL, Input/Output synchronous Trigger,
off-camera light synchronous Trigger
Transmitter Input/output trigger off-camera flash and output flash.
Speedlite flash trigger remote control
Studio light off-camera flash trigger remote control
Transmitter installed on camera hot shoe, and trigger the flash light.
Off-camera flash remote control
Receiver A will operate when transmitter set at A.
Receiver B will operate when transmitter set at B.
14
13
Receiver A、B will operate when transmitter set at A、B.
Receiver A、 B、 C will operate when transmitter set at A、 B、 C.
Flash grouping remote control
*If the shooting interval time or 2 shooting times
is longer than 30s, you need to press button
again, or it may miss flash.
Slightly press the transmitter button.
Non-compatible mode using method
is same as compatible mode.
Master Camera
Slave Camera
Receiver
15
261121 V10.01
16
changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
*As camera has difference reaction time, then shooting time will be little difference.
*Some Cameras won't shoot if the camera cannot focus even get shooting signal, so please adjust the camera to “MF”
*The camera cannot focus if the transmitter is not specific for the camera.
Now you can start to use incredible PIXEL product. If you have any question,you can contact the local dealer or visit to
http://www.pixelhk.com.
This manual information is updated at May 1, 2011. If you want to use this product combined with others, which
published after this date; please consult with the PIXEL dealer for further information.
Half-press the camera shooting button, master camera and all slave cameras starting focus. Fully-press the
camera shooting button and all the cameras starting shoot.
*Camera Shutter cable is purchased separately.
Transmitter
Master camera control the slave camera
*The shutter cable should be purchased separately.
* Some Cameras won't shoot if the camera cannot focus even get shooting signal,
so please adjust the camera to “MF”
1. Slightly half-press release button,, transmitter
and receiver indicate light as Green,
n, then the
camera starting focus.
2. Fully press release button, transmitter
itter
and receiver as Red, then the camera
era
starting shoot.
Remote control
Control shooting
as below:
When the transmitter is incompatible with the camera, you should use it
Use under incompatible mode

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 1
Create Date                     : 2013:05:13 10:06:15+08:00
Title                           : user manual.pdf
Producer                        : GPL Ghostscript 8.64
Author                          : Wendy_Jiang
Creator                         : Adobe Acrobat 10.0.0
Modify Date                     : 2013:05:13 02:06:21Z

EXIF Metadata provided by EXIF.tools