Pixel Technology X900C Speedlite User Manual 1
Shenzhen Pixel Technology Limited Speedlite 1
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3505205 |
| Application ID | VSQ+fr2/B9TyP0FLc9DJsA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 275.24kB (3440495 bits) |
| Date Submitted | 2017-08-10 00:00:00 |
| Date Available | 2017-08-10 00:00:00 |
| Creation Date | 2016-11-03 16:51:15 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2016-11-03 16:51:15 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | 陈观彩 |
Warning Component Name ● Do not expose this product in high temperature location or confined spaces exposed to strong direct sunlight and other overheating places. ● Keep it dry. Do not touch this product with wet hand. Do not expose this product to water or rain, or you may not be able to use it. ● Do not use it in inflammable gas, or it may cause explosion or fire. ● This product involved in battery. Please strictly follow the corresponding operations related to battery, or it may cause explosion or fire. ● Do not put the component in strong vibration, or it may cause fault of this product. ● Remove the batteries during long periods of non-use. ● Do not use the flash light in a short distance from the eyes, or it may cause possible injury to eyes or blindness. ● After continuous use, it will be very hot. Do not touch, or it may cause burn. ● After continuous use, the battery might be hot. Please be careful when changing new battery. ● Do not disassemble or maintain this product by yourself. The internal high voltage will cause electric shock. ●Only the same brand and battery type can be used. Lithium Battery Speedlite X900 C For Canon SET* RMOT: namely gently press to set SET function. Press and hold this button to enter next function. With* mark function button means press and hold this button to enter the corresponding function setting. -/+ Function Button This function button is applied to adjust output parameter of the flash, FEB and other functions. Function adjustment alters from shooting mode. It's subject to image display function. FEB, namely flash exposure bracket. When displaying FEB, you may set flash exposure bracket. SYNC Mode Button FUNC Selector Button ZOOM This Zoom button is applied to set Zoom mode. Zoom mode includes manual zoom [ ] and auto zoom [ ]. Set this function with dial selector. 60 (ISO100 200mm) In 1st Curtain mode the icon don`t show Flash Coverage Range: 20 -200mm Auto Zoom: Introduction According to shooting angle and image to auto adjust the coverage range Manual Zoom: According to camera or flash setting to adjust the zoom range FUNC Selector Icon Flash Mode: ETTL/M/MULT SYNC Mode Icon Stroboscopic Flash: 1-500Hz Wireless Flash: Radio transmission/ Optical transmission support Master/ Slave, S1/S2 SYNC Mode: High Speed Sync, 1st Curtain Sync, 2nd Curtain Sync Adjustable Angle: Up/down: -7/90 degree Left / Right: 180 degree/180 degree Manual Flash: 1/128-1/1 output control (1/3rd increments) Recycle Time: Less than 2.5 sec (1/1 full power output) Wireless Flash Mode: Switch of LED light LED light LCD Display Screen: High definition dot matrix screen Internal Power Source: 4×AA size alkaline batteries or rechargeable batteries (4×1.5V) Optical Transmission Icon: Radio Transmission Icon: External Interface: Hot shoe, PC port, USB port, external power port In 1/3rd increments (±3 stops) EV: English FEB: In 1/3rd increments (±3 stops) Battery Life: 180 times (1/1 flash output, with Sanyo Eneloop batteries) Fluorescent tube: Ultra-long battery life design AF-assist Beam Multi dot matrix temperature control, battery Overheating Warning: overheating warning Instruction Manual AF-Assist Beam: Support 3. Flash Channel Setting After entered wireless flash Master mode, continuous press SET* RMOT button, and then move setting icon to Channel Setting [CH1], then turn dial selector to select flash channel. Optional channel: CH1-CH4, 4 channels in total. Slave flash channel need to set in the slave interface, the method is the same as master channel setting. If the transmission channels of the master unit and slave unit are different, then the slave unit won't fire. Both Master and slave must be set to the same channel. 4. Master Flash On/Off Setting After entered wireless flash Master mode, continuous press SET* RMOT button, and then move setting icon to Master Flash On/Off [ ] , then turn dial selector to select Master Flash On[ ] or Off [ ]. When flash is On, master flash will join in exposure. When flash is Off, master flash will not join in exposure. ※ Under Slave mode, it's not available to set flash On/Off. Here flash is On by default. ※When using optical transmission function and the Master flash set as OFF, the Master flash may join in exposure under low sync speed according to optical pulse transmission theory. ETTL Mode Under ETTL mode, you can set group flash ratio, ALL → A:B → A:BC. 1. A:B can set the flash ratio of group A ,B; 2. A:BC can set the flash ratio of group A, B. Under this mode, group C is independent which can be set individually; 3. Under ALL mode, all of units will join in firing. ※ If need more flash output, you can invite the numbers of the slave unit which is unlimited. M Mode Under manual wireless flash mode, the Master unit can set different flash output for every slave flash (every group). 1. A:B can set the flash output of group A ,B, except group C; 2. A:BC can set the flash output of group A, B, C. Each group unit is independent, without interference. 3. Under ALL mode, all of units will join in firing. X900 Speedlite is the newest one developed by Pixel which has multifunction and fast recycle time. Featured with fast recycle time, it can use Lithium battery, AA battery and can be used with Pixel power bank TD-386 which has high power capacity. When use lithium battery or power bank TD-386, the recycle time is less than 1.5 sec, full power output is up to over 700 times that makes you cannot miss the amazing moment; It has the configurations of HSS, high GN, wireless control, stroboscopic and so on. The frequency of stroboscopic is up to 500 times, the performance is more strong and stable; In the area of controlling Speedlite, beside the optical control, it imports wireless control system FSK2.4GHz and supports the direct wireless control between King PRO, Speedlite and Speedlite making the match between speedlites more free. X900 Speedlite ingeniously adopts 4 watt full white light LED creative set light, LCD lattice screen with high definition,multimatrix overheat warning system and other thoughtful equipment. It is a Speedlith with high performance, multifunction and multipurpose. Beside that, users can upgrade firmware through Mini port to enjoy official and thoughtful services from Pixel. Dial Selector Firmware Upgrade: Support Dimension: 73.50mm×61.00mm×192.00mm Weight: 420.00g (excluding batteries) press SET* RMOT button, and then move setting icon to Group Control Setting [ ALL], then turn dial selector to select the group as needed. Master Group Mode Switch: ALL → A → :B → A:BC Slave Group Mode Switch: A → B → C ※ Focal distance can set as 20-200mm. Some cameras do not support higher focal distance. The setting of focal distance is subject to camera. In a range of 20-200mm, it will be displayed correctly. But an error may occur if out of this range. So also does if the range doesn’t comform to this flash. Dial Selector Specifications GN: * RMOT Wireless Flash Button Press and hold this button to enter wireless control mode. The wireless mode and optical transmission mode can be set individually. First, press and hold this button to enter wireless flash mode; and then press and hold this button again to enter Slave mode; and press and hold once again to exit wireless flash mode. Operation Interface 3. Under ALL mode, all of units will join in firing. The frequency and flash times of every firing group are the same. ※ Under MULT mode of optical transmission flash, flash frequency can be set between 1-199Hz. ※ Optical transmission is achieved by optical pulse, so its transmission performance is not so good and transmission distance is short. For better use wireless flash function, we are advised to use wireless flash mode. Being less affected by obstacles, wireless signal transmission and control efficiency are much higher. S1/S2 Optical Control Mode S1 Manual Optical Transmission Mode: when set flash as this mode, it can work with the first firing of the Master flash synchronously. Set Master flash as manual M mode. The ETTL or MULT mode cannot be fired. S2 ETTL Optical Transmission Mode: when set flash as this mode, it can fire with the ETTL mode of the Master flash synchronously. Set Master flash as ETTL auto metering mode. The M or MULT mode cannot be fired. 1. After entered optical Slave Mode (SL), gently press MODE* FN button and then turn dial selector to select MODE S1 or MODE S2 mode. 2. Under Slave MODE S1 or MODE S2 mode, press +/- and then turn dial selector to adjust the output power of Slave Flash. ※ MODE* FN: namely gently press Slave mode, press and hold to enter FN function setting. Wireless Flash Control X900 speedlite is equipped with radio transmission flash function. With radio transmission, flash firing is less affected by obstacles, so its transmission and control efficiency are much higher. When using with Pixel King PRO and OPAS flash trigger, or among X900c,X800PRO speedlites (Master/Slave), you can use wireless transmission flash. ※The X900 wireless flash (2.4GHz) system is not compatible with that of Canon original flash. It can only be compatible with part of Pixel wireless products. Radio Transmission Flash Function Parameter Transmission Method: FSK2.4GHz Mode Control: Master/Slave Channel Control: 1-15 channels Group Control: 3 groups (A/B/C) Transmission Distance: about 50M Flash Ratio Control: 1:8-1:1-8:1 Sync Mode: HSS, 1st curtain sync MULT Mode 1. A:B can set different flash output of group A and B individually, except group C. The frequency and flash times of group A and B are the same; 2. A:BC can set the flash output of group A, B, C. The flash power of the three groups can be set separately. And the frequency and flash times of the three groups are the same; Wireless flash control can set Master/Slave group control, channel control, Master flash On/Off. 10 Wireless Flash Control Operation Introduction This dial selector is applied to adjust setting parameter of the flash. Turn left to reduce setting parameter, and turn right to increase setting parameter. 1. Master/Slave Mode Setting Master Mode Setting: press and hold * RMOT button to enter wireless flash control mode. Gently press this button again and then turn dial selector to select radio transmission mode[ ]. If this mode is already displayed after entered wireless flash control interface, then there is no need to make setting. When using wireless flash, the speedlite mounted on the camera set as this mode. Slave Mode Setting: after entered wireless flash mode, press and hold SET * RMOT button to enter Slave mode [SL]. Gently press this button again and then turn dial selector to select Slave optical transmission mode[ ]. If this mode is already displayed on the interface after entered slave mode, then there is no need to make setting. 2. Group Control Setting After entered wireless flash Master mode, continuous press SET* RMOT button, move setting icon to Group Control Setting [ ALL], then turn dial selector to select the group as needed. Master Group Mode Switch: ALL → A:B → A:BC Slave Group Mode Switch: A → B → C 3. Flash Channel Setting After entered wireless flash Master mode, continuous press SET * RMOT button, and then move setting icon to Channel Setting [CH1], then turn dial selector to select channel. Optional channel: CH1-CH15,15 channels in total. Slave flash channel need to set in the slave interface, the method is the same as master channel setting. If the transmission channels of the master unit and slave unit are different, then the slave unit won't fire. Both Master and slave must be set to the same channel. 4. Master Flash On/Off Setting After entered wireless flash Master mode, continuous press SET * RMOT button, and then move setting icon to Master Flash On/Off[ ], then turn dial selector to select Master Flash On [ ] or Off [ ]. ※ Under Slave mode, it's not available to set flash On/Off. Here the flash is On by default. ETTL Mode Under ETTL mode, you can set group flash ratio, ALL → A:B → A:BC. 1. A:B can set the flash ratio of group A ,B; 2. A:BC can set the flash ratio of group A, B. Under this mode, group C is independent which can be set individually; 3. Under ALL mode, all of units will join in firing. ※ If need more flash output, you can invite the numbers of the slave unit which is unlimited. M Mode Under manual wireless flash mode, the Master unit can set different flash output for every slave flash (every group). 1. A:B can set the flash output of group A ,B, except group C; 2. A:BC can set the flash output of group A, B, C. Each group 11 -4- -3- unit is independent, without interference; 3. Under ALL mode, all of units will join in firing. MULT Mode 1. A:B can set different flash output of group A and B individually, except group C. The frequency and flash times of group A and B are the same; 2. A:BC can set the flash output of group A, B, C. The flash power of the three groups can be set separately. And the frequency and flash times of the three groups are the same; 3. Under ALL mode, all of units will join in firing. The frequency and flash times of every firing group are the same. ※ Under MULT mode of wireless flash, flash frequency can be set between 1-199Hz. Error Warning Prompt When an error occurs on the flash or overheating protection is activated, the following information will display on the screen: Motor Error Prompt: WARNING: MOTOR ERROR Motor Error, Battery and Flash Head Overheating Prompt: WARNING: MOTOR ERROR BAT LAMP TEMPERATURE Motor Error, Flash Head Overheating Prompt: WARNING: MOTOR ERROR LAMP TEMPERATURE Flash Head Overheating Prompt: WARNING: LAMP TEMPERATURE Battery Overheating Prompt: WARNING: BATTER TEMPERATURE Unknown Error Prompt: WARNING: ERROR 90 ※ When a prompt occurs on flash motor and unknown error, you are advised to switch on-off the flash repeatedly to make it self-recovery. After recovery, the prompt info will disappear, and you can reuse it. If not, you are advised to contact the dealer for repair. ※ When you use the flash continually, flash head and battery overheating protection will be activated, then the LCD display screen will shows error prompt and restrict flash firing. Now please turn off the flash and allow a rest time for reuse. Then the prompt info will disappear, and you can reuse it. Introduction of operation Please make sure the communication mode, channel and group of king pro and x800 pro are correct, otherwise they cannot communicate and be used normally.The king pro and x800 pro installed on the end of camera should be set as master mode, the off-camera flash should be set as slave mode; then, the group of master mode and slave mode and the channel should be set as the same. LCD Lighting Time Setting Press and hold to enter FN function setting, and then continuously press this button to move the setting icon to LCD Lighting Time Setting, and then turn dial selector to select LCD Lighting Time: ] means on all the time, ] means on for 5 sec, ] means on for 10 sec, ] means turn off the light, Press OK to confirm the settings. AF-assist Beam Setting AF-assist beam is mainly applied to low-light or low contrast shooting environment. Under this condition, the The remote flash must be set as slave mode X900 slave mode setting: After power-on, * pressing the button “RMOT” for two times entering into SL mode. X900 slave mode Press and hold to enter FN function setting, and then continuously press this button to move the setting icon to AF-assist Beam Setting, and then turn dial selector to turn on AF [ ] or turn off AF [ ]. Press OK to confirm the settings. Stand-by Time Setting Press and hold to enter FN function setting, and then continuously press this button to move the setting icon to Stand-by Time Setting, and then turn dial selector to select stand-by time: ] means 5mins stand-by time, ] means 10mins stand-by time, ] means 30mins stand-by time, ] means 1hr stand-by time, ] means 2hrs stand-by time, ] means 4hrs stand-by time, ] means non-sleep mode. Press OK to confirm the settings. When under wireless Slave mode, the default stand-by time as 1 hour. When flash entered sleep mode, the flash display screen will show [ ] icon. Half-press camera shutter or Flash Test Button to wake up the flash. LOCK It's applied to lock the parameter settings of the flash, avoiding the flash parameter may be changed accidently. MODE Flash mode button. It's applied to set the flash mode. You can set the flash mode to ETTL full auto flash, Manual flash and Mult flash mode individually. Press and hold this button to reset your flash to the original factory settings. ETTL ETTL Flash Mode. The camera and flash metering system will work together to make correct exposure, thus the shooting subject and background will get balanced exposure. Under this mode, it's available to set the EV and FEB. The EV and FEB adjustable power is between -3.0EV to + 3.0EV in 1/3 increments. Manual Flash Mode. You can set the flash output from 1/128 power to 1/1 full output in 1/3 increments. Set flash output power with dial selector. Turn left to reduce setting parameter, and turn right to increase setting parameter. MULT Mult Flash Mode. Mult flash mode can make one image displays as a serial continuous moving image. Under Mult flash mode, you can set flash output power, flash times and flash frequency. ※ Mult frequency can set as 1-500 Hz. Frequency setting is subject to camera. Some cameras do not support higher frequency. King pro master mode The button of mode: gently pressing it, entering into master mode and slave mode. X900 master mode LED Light The LED light which equipped with X900 Speedlite is controlled by one switch separately with its own circuit design. It has no effect on Speedlite, one light can be used in many ways. USB Port It's applied to upgrade the firmware. You can download the newest firmware from Pixel website. Website: www.pixelhk.com It's applied to connect camera with SYNC cable or trigger flash. PUSH Reflect Lock Release Button By pressing this button, the flash head can be adjusted to up/down and left/right. Up/down ward angle -7 to 90 degree, left/right angle 180 degree. Reflector Using the reflector enables you to reflect light in a person's eyes and create a more vivid expression. When using, pull out the reflector and wide panel together, and push back the wide panel. Then you may use the reflector. Wide Panel Using wide panel, flash coverage range will enlarge. When using, pull out the reflector with wide panel together, and push back reflector. Then you may use the wide panel. Support Camera External Flash Menu Control X900 speedlite can control flash mode, output power, exposure compensation, FEB, focus, sync mode and other functions via camera flash settings menu. (Only for cameras equipped with flash setting menu) ※ While controlling exposure compensation on X900 speedlite via camera flash setting menu, the exposure compensation value should set as 0 EV, or you may not be able to set camera exposure compensation. When flash LCD screen shows CAM, it means camera output exposure compensation. When flash LCD screen shows LAMP, it means flash output exposure compensation. Wireless Flash Control X900 is equipped with optical transmission flash control and radio transmission flash control function. ] Optical transmission mode; ] FSK2.4Hz Optical Transmission Control master mode in master mode channel, slave mode in slave mode channel. 2. 3. 4. PC Port X900 speedlite supports optical transmission flash ※Set 1. 5. control function. The speedlite mounted on the camera can transmit signal via optical pulse to control firing r e m o t e l y. W h e n u s i n g w i r e l e s s f l a s h m o d e , t h e speedlite mounted on the camera should set as Master mode, and the off-camera flash set as Slave mode. Optical transmis-sion flash is achieved by optical pulse, not wireless signal transmission, so the transmission distance is very short. Please note the following issues when using: Make sure the slave unit within effective control range when using optical transmission flash mode; The receiving signal sensor of slave unit should face to master unit; You are required to use flashes that are equipped with an optical transmission wireless shooting function; Please do not place any obstacles between the master unit and salve unit when using optical transmission flash mode, or it may affect optical signal transmission; Under optical transmission flash mode, use ETTL flash and M flash support high speed sync (HSS) and 1st curtain sync. When using MULT flash, it supports 1st curtain sync. Optical Transmission Flash Function Parameter Transmission Method: Optical pulse Mode Control: Master/Slave,S1/S2 Channel Control: 1-4 channels Group Control: 3 groups (A/B/C) Transmission Distance: about 0.7-10m Horizontal: ±40°; Vertical: ±30° (facing to master unit) Flash Ratio Control: 1:8-1:1-8:1 Sync Mode: HSS, 1st curtain sync Optical Transmission Flash Control Operation Introduction Press and hold * RMOT button to enter wireless flash master mode; after entered wireless flash mode, press and hold SET RMOT button to enter wireless flash Slave mode. Press and hold again to exit wireless flash mode. Optical Transmission mode can set Master/Slave group control, channel control, Master flash On/Off. 1. Master/Slave Mode Setting Master Mode Setting: press and hold * RMOT button to enter wireless flash control mode. Gently press this button again and then turn dial selector to select optical transmission mode[ ] . If this mode is already displayed after entered wireless flash control interface, then there is no need to make setting. When using optical transmission flash, the speedlite mounted on the camera should set as this mode. Slave Mode Setting: after entered wireless flash mode, press and hold SET * RMOT to enter Slave mode [SL]. Gently press SET* RMOT button again and then turn dial selector to select Slave optical transmission mode [ ]. If this mode is already displayed on the interface after entered slave mode, then there is no need to make setting. 2. Group Control Setting After entered wireless flash Master mode, continuous Slave Group FCC STATEMENT : King PRO Group This device complies with Part 15 of the FCC Rules. Operation is ※The 1-4 channel of King PRO correspond with the 1-4 channel of Speedlite. subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This Master Channel: device must accept any interference received, including King PRO master channel: X900 master mode channel Slave Mode interference that may cause undesired operation. / / ：King PRO Group Icon King PRO Group Setting Button Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority X900 Slave Group to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of ：Channel Icon ：Channel Icon the FCC Rules. These limits are designed to provide reasonable The icon of slave mode of 2.4GHz protection against harmful interference in a residential Slave Channel X900 Slave channel installation. This equipment generates uses and can radiate radio ：Channel Icon frequency energy and, if not installed and used in accordance Slave Group with the instructions, may cause harmful interference to radio x900 Slave Group communications. However, there is no guarantee that interference 1.The setting of communication channel King PRO communication channel setting: After powered-on, gently pressing the second button on the upper right corner of the King pro （the button on the center) to enter into communication channel and choose setting function by pressing the first button on upper left corner that will show a "+" on screen and the second button that will show a "-" on the screen. Then, pressing button to choose "01" to "15" channels and pressing the first button on the lower left of the king pro that will show an "OK" on the screen. The communication channel setting of X900 Speedlite: Gently pressing the first button on the upper left corner of the flash that correspond to the button of "SET*RMO" on the lower left of Canon flash. When the indicator is on, entering into the communication channel setting and turning the round dial near the "OK" on the screen. You can choose the channel from "CH01" to "CH04" and press the button of "OK" to confirm. The icon of master mode of 2.4GHz Pressing the button of “RMOT” for a long time, you can enter into the maser mode. 13 ※continuous flashes, allow a rest time of the flash at least 15mins. ※If you fire more than 10 continuous flashes, the safety function may activate and restrict flash firing. If this happens, please allow a rest time of the flash at least 15mins. ※ To avoid the damage of flash head due to overheating, do not use Mult flash shooting over 10 times. After 10 Pressing the “RMOT” button for a long time for two times and entering into the SL mode from the starting-up interface. Introduction of the function 12 Beep Setting Press and hold to enter FN function setting, and then turn dial selector to turn on beep [ ] or turn off beep [ ], then press OK to confirm the settings. 1.Communication mode settin The gear installed on the camera must be set as master mode: The master mode setting of King Pro: After power-on, gently pressing the right first button on the king pro installed on the camera, entering into the setting of master mode and slave mode to set the mode by pressing the left first button that will be display a “+” on the screen and the second button that will display a “-” on the screen. Then, pressing the first left button that will display an “OK” on the screen. The master/slave mode setting of X900: you can enter into the master mod by pressing the first upper left button on flash for a long time (the button of “RMOT”) and choose FSK2.4GHz wireless mode as flash mode. [ The introduction of the operation of Pixel Wireless Trigger King PRO and X900 Speedlite wireless control. Both Wireless trigger King pro and x900 pro have FSK2.4GHz wireless control mode, and X900 Speedlite has a built-in wireless receiver; When used with king pro, the x900 pro flash can be controlled without Receiver and all kinds of flash modes can be controlled by king pro, for example: TTL, M, focal length, exposure compensation and so on；At the same time, two flashes can be used in wireless flash mode through 2.4GHz communication without any trigger. (Beside FSK2.4GHz mode, x900 pro has optical mode. The introduction is about the operation mode of FSK2.4GHz) SYNC Mode Button SYNC *FN button can set flash sync mode and FN function settings individually. SYNC * FN: gently press this button to set flash sync mode. Press and hold this button to enter FN function setting. SYNC can set HSS, 1st curtain sync and 2nd curtain sync mode. Gently press this button to set HSS [ ], 1st curtain sync [ it won’t show the icon], 2nd curtain sync [ ]. Please select the sync mode as needed. Press and hold this button to enter Beep Setting, LCD Lighting Time Setting, AF-assist Beam Setting and Stand-by Time Setting. built-in AF-assist beam activates automatically to help autofocus. will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, ：Channel Icon which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 3：The setting of communication group The communication group setting of King pro: After power on, gently pressing the three buttons of "A""B""C" separately. When the red light is on which represents the corresponded group control switch. The communication group setting of x900: In the master mode, repeatedly pressing the first button on upper left corner of the flash (correspond to the button of "SET*RMO" on the lower left of Canon flash).Moving the light icon to the communication group setting, you can turn the round dial near the button of "OK" and choose the channel you need to control and press the button of "OK" In the slave mode of flash, gently and repeatedly pressing the first button on the upper left corner of the flash (correspond to the button of "SET*RMO" on the lower left of Canon flash), moving the light icon into the communication group setting. At the time, turning the round dial on the OK button and choosing channels from "A" "B" "C" and pressing the OK button to confirm. more of the following measures: ：Group Icon Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Warranty Connect the equipment into an outlet on a circuit different from One year warranty from the day of purchase. Please kindly contact Pixel or distributor for more details. Thank you for using Pixel product and reading this instruction manual. If you have any questions, please contact your local dealer or visit http://www.pixelhk.com The instruction manual is updated June 27, 2016. For information on the compatibility with accessories marketed after this date, please contact Pixel's dealer for advice. that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturer: Shenzhen Pixel Technology Limited Address: Rm1411, AAA Building, Renmin Road, Longhua District, Shenzhen City. TEL: 400-8084899 Website: www. Pixelhk.com.cn Product Standard: Q/PSKJ004-2016 PSM 154177 V10.01 14 15 16 17
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2016:11:03 16:51:15+08:00 Modify Date : 2016:11:03 16:51:15+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : 陈观彩 Creator : CorelDRAW X6 Title : 未命名 -1EXIF Metadata provided by EXIF.tools