Polar Electro Y6 Polar Cycling Speed / Cadence Sensor User Manual Speed

Polar Electro Oy Polar Cycling Speed / Cadence Sensor Speed

User Manual Speed

User ManualGebrauchsanleitungManuel d’UtilisationManuale d’usoGebruiksaanwijzingManual del UsuarioManual do utilizadorBrugervejledningKäyttöohjeBrukerveiledningBruksanvisning使⽤説明書快捷使用指南快捷使用指南Manufactured byPolar Electro Oy  Professorintie 5 FI-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300www.polar.comhttp://www.polar.com/en/support/polar_speed_sensor_bluetooth_smart                         Model:Y6POLAR SPEED SENSOR17948569.00    GEN   10/2013    WINLEE
123ABID:ID: XXXXXXXXID: XXXXXXXX
ENGLISHPolar Speed Sensor Bluetooth®Smart isdesigned to measure speed and distance whencycling.Polar Speed Sensor Bluetooth®Smart iscompatible with Bluetooth®Smart Readydevices that support Bluetooth®Cycling Speedand Cadence Service. When using asmartphone, a separate application is requiredto view speed sensor data. It is recommended touse the Polar Beat application but it is alsopossible to use other applications.SYSTEM IMAGE1
If you have a polarpersonaltrainer.com account,Polar Beat automatically synchronizes yourtraining files to it. Please note that you mustsign in to your polarpersonaltrainer.com accountwhen starting Polar Beat for the autosync towork.The latest version of this user manual can bedownloaded at www.polar.com/support.Please follow the pictures on the inner covers.Write the device ID printed on your speedsensor in the space on the inner front cover(picture 1). The original marking may fade asa result of normal wear and tear.Product Elements1. Polar Universal Bike Mount (picture 2 A).Use cable ties to secure the bike mountsnugly on the handlebar (picture 3).2. Speed sensor, rubber part and spokemagnet (picture 2 B).2ENGLISH
Installing the Speed SensorFor a video tutorial, see Installing Polar SpeedSensor Bluetooth®Smart atwww.polar.com/en/polar_community/videos.To install the speed sensor and spoke magnet,you need cutters and a cross-head screwdriver.1. It is recommended to install the speedsensor on the front fork of your bicycle (asin picture 2). Do not install the speedsensor on the seat stay if the (optional)power sensor is mounted.2. Attach the rubber part to the speed sensor(picture 4).3. Pass the cable ties over the speed sensorand rubber part (picture 5). Adjust thesensor to the front fork so that the POLARlogo faces outwards. Adjust the ties loosely.Do not tighten them fully yet.4. Attach the magnet to a spoke at the samelevel as the speed sensor. There is a smallcaved dot at the backside of the sensor,which indicates the spot the magnet shouldbe pointing at when passing the sensor.Fasten the magnet to the spoke and tightenit loosely with a screwdriver. Do not tightenit fully yet.ENGLISH 3
5. Fine-tune the positioning of both themagnet and the speed sensor so that themagnet passes close to the sensor but doesnot touch it. Move the sensor towards thewheel/spokes as close as possible. The gapbetween the sensor and the magnet shouldbe under 4 mm/0.16’’. The gap is correctwhen you can fit a cable tie between themagnet and the sensor.6. Rotate the front tire to test the speedsensor. The flashing red light on the sensorindicates that the magnet and the sensorare positioned correctly. If you keeprotating the tire, the light will go off.Tighten the screw to the magnet with ascrewdriver. Also tighten the cable tiessecurely and cut off any excess cable tieends.Before you start cycling, set the wheel size ofyour bicycle into the receiving device ormobile application.Speed Sensor PairingYour new speed sensor must be paired with thereceiving device in order to receive speed anddistance data. This enables training in a groupwithout interference from other sensors. Formore information, see the user guidancematerial of the receiving device or mobileapplication.4ENGLISH
Care and MaintenanceKeep the speed sensor clean. Clean it with a mild soapand water solution and rinse off with clean water. Dry itcarefully with a soft towel. Never use alcohol or anyabrasive material such as steel wool or cleaningchemicals. Do not immerse the speed sensor in water.Your safety is important to us. Make sure that you canturn your handlebars normally and that the cable wiresfor brakes or gears do not catch the bike mount or thesensor. Also, make sure that the sensor does notdisturb pedaling or using the brakes or gears. Whileriding your bike, keep your eyes on the road to preventpossible accidents and injury. Avoid hard hits as thesemay damage the sensor.Replacement magnet sets and bike mounts can bepurchased separately.Speed Sensor BatteryThe battery cannot be replaced. The sensor is sealed inorder to maximize mechanical longevity and reliability.To purchase a new sensor, contact your authorizedPolar Service Center or retailer.The battery level of your sensor is displayed on thereceiving device if it supports Bluetooth®BatteryService.To increase battery life, Polar Speed Sensor Bluetooth®Smart goes into power saving mode in ten minutes ifthe magnet is not passing the sensor.ENGLISH 5
Frequently Asked QuestionsWhat should I do if......the speed reading is 0.0 or there is no speed readingwhile cycling?• Make sure the position and distance of the sensor tothe magnet are appropriate.• Check that you have activated the speed function inthe receiving device. For further information, seethe user guidance material of the receiving device ormobile application.• If the 0.0 reading appears irregularly, this may bedue to temporary electromagnetic interference inyour current surroundings.• If the 0.0 reading is constant, the battery may beempty....there are irregular speed, distance or heart ratereadings?• Disturbance may occur near microwave ovens andcomputers. Also WLAN base stations may causeinterference when training with Polar Speed SensorBluetooth®Smart. To avoid erratic reading ormisbehaviors, move away from possible sources ofdisturbance.How do I know...... if the sensor is transmitting data to the receivingdevice?•When you begin cycling, a flashing red lightindicates that the sensor is alive and it istransmitting speed signal. As you continue cycling,the light goes off.6ENGLISH
Technical SpecificationOperating temperature: -10 ºC to +50 ºC / +14 ºF to +122 ºFBattery life: Average 4 years (if you train on average1h/day, 7 days/week), depending onconditionsAccuracy: ±1 %Material: Thermoplastic polymerWater resistance: Splash proofFCC ID: INWY6Bluetooth QD ID: ?????Copyright © 2013 Polar Electro Oy, FI-90440KEMPELE.All rights reserved. No part of this manual may be usedor reproduced in any form or by any means withoutprior written permission of Polar Electro Oy. The namesand logos marked with a ™ symbol in this user manualor in the package of this product are trademarks ofPolar Electro Oy. The names and logos marked with a ®symbol in this user's manual or in the package of thisproduct are registered trademarks of Polar Electro Oy.The Bluetooth®word mark and logos are registeredtrademarks owned by Bluetooth SIG, Inc. and any useof such marks by Polar Electro Oy is under license.ENGLISH 7
54
User ManualGebrauchsanleitungManuel d’UtilisationManuale d’usoGebruiksaanwijzingManual del UsuarioManual do utilizadorBrugervejledningKäyttöohjeBrukerveiledningBruksanvisning使⽤説明書快捷使用指南快捷使用指南Manufactured byPolar Electro Oy  Professorintie 5 FI-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300www.polar.comhttp://www.polar.com/en/support/polar_speed_sensor_bluetooth_smart                         Model:Y6POLAR SPEED SENSOR17948569.00    GEN   10/2013    WINLEE

Navigation menu