PowerFleet CTLL CelloTrack 10Y LTE C1 GC9773001-000 User Manual CelloTrack T Family Overview

Pointer Telocation CelloTrack 10Y LTE C1 GC9773001-000 CelloTrack T Family Overview

User manual_CelloTrack 10y User Manual -DFT1.pdf

Copyright © 2018 by Pointer Telocation, Ltd. Cellocator™ CelloTrack 10y USER Manaul Proprietary and Confidential Version 1.0 Revised and Updated: May 30, 2018
CelloTrack 10y Overview CelloTrack T Family Overview Page 2 Copyright © 2018 by Pointer Telocation, Ltd. Legal Notices IMPORTANT 1. All legal terms and safety and operating instructions should be read thoroughly before the product accompanying this document is installed and operated. 2. This document should be retained for future reference. 3. Attachments, accessories or peripheral devices not supplied or recommended in writing by Pointer Telocation Ltd. May be hazardous and/or may cause damage to the product and should not, in any circumstances, be used or combined with the product. General The product accompanying this document is not designated for and should not be used in life support appliances, devices, machines or other systems of any sort where any malfunction of the product can reasonably be expected to result in injury or death. Customers of Pointer Telocation Ltd. using, integrating, and/or selling the product for use in such applications do so at their own risk and agree to fully indemnify Pointer Telocation Ltd. for any resulting loss or damages. Warranty Exceptions and Disclaimers Pointer Telocation Ltd. Shall bear no responsibility and shall have no obligation under the foregoing limited warranty for any damages resulting from normal wear and tear, the cost of obtaining substitute products, or any defect that is (i) discovered by purchaser during the warranty period but purchaser does not notify Pointer Telocation Ltd. Until after the end of the warranty period, (ii) caused by any accident, force majeure, misuse, abuse, handling or testing, improper installation or unauthorized repair or modification of the product, (iii) caused by use of any software not supplied by Pointer Telocation Ltd., or by use of the product other than in accordance with its documentation, or (iv) the result of electrostatic discharge, electrical surge, fire, flood or similar causes. Unless otherwise provided in a written agreement between the purchaser and Pointer Telocation Ltd., the purchaser shall be solely responsible for the proper configuration, testing and verification of the product prior to deployment in the field. POINTER TELOCATION LTD.’S SOLE RESPONSIBILITY AND PURCHASER’S SOLE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE PRODUCT HARDWARE, SOFTWARE OR SOFTWARE MEDIA (OR IF REPAIR OR REPLACEMENT IS NOT POSSIBLE, OBTAIN A REFUND OF THE PURCHASE PRICE) AS PROVIDED ABOVE. POINTER TELOCATION LTD. EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, SATISFACTORY PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL POINTER TELOCATION LTD. BE LIABLE FOR ANY INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS OR INTERRUPTION OF USE, DATA, REVENUES OR PROFITS) RESULTING FROM A BREACH OF THIS WARRANTY OR BASED ON ANY OTHER LEGAL THEORY, EVEN IF POINTER TELOCATION LTD. HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
CelloTrack 10y Overview CelloTrack T Family Overview Page 3 Copyright © 2018 by Pointer Telocation, Ltd. Intellectual Property Copyright in and to this document is owned solely by Pointer Telocation Ltd. Nothing in this document shall be construed as granting you any license to any intellectual property rights subsisting in or related to the subject matter of this document including, without limitation, patents, patent applications, trademarks, copyrights or other intellectual property rights, all of which remain the sole property of Pointer Telocation Ltd. Subject to applicable copyright law, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the express written permission of Pointer Telocation Ltd. FCC Compliance Statement The FCC Wants You to Know This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: Re-orient or re-locate the receiving antenna. Increase the distance between the device and the receiver. Connect the device to an outlet on a circuit different from the one that supplies power to the receiver. Consult the dealer or an experienced radio/TV technician. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with FCC Rules Part 15 and with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired operation. a) Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device must not be collocated or operating in conjunction with any other antenna or transmitter.© Copyright 2018. All rights reserved.
CelloTrack 10y Overview CelloTrack T Family Overview Page 4 Copyright © 2018 by Pointer Telocation, Ltd. 1 Introduction 1.1 About this Document This document provides a brief overview of the CelloTrack 10y. It includes descriptions of CelloTrack 10y special features and modes of operation, battery life tables and technical specifications. 1.2 Abbreviations Abbreviation Description FB Front Button GSM Global System for Mobile communications GPS Global Positioning System GNSS Global Navigation Satellite System OTA Over the Air SMS Short Message Service (GSM) IP International Protection Rating 3Y Three Years 8M Eight Months AH Amper Hour 3D 3 Dimensions LED Light Emitted Diode APS Automatic Power Save (modem feature) GPIO General Purpose Input / Output 1.3 References # Reference Description 1 2 1.4 Revision History Version Date Description 1.0 May 29, 2018 Initial release
CelloTrack 10y Overview CelloTrack T Family Overview Page 5 Copyright © 2018 by Pointer Telocation, Ltd. 2 The CelloTrack 10y 2.1 CelloTrack 10y Overview Cellocator's CelloTrack 10y, designed for advanced asset tracking and asset management applications, provides enhanced functionality, ease of installation and support for a wide range of applications. The capabilities provided by the CelloTrack 10y can greatly reduce an enterprise's financial losses incurred as a result of the often difficult task of successfully tracking and remotely managing the location, usage profile and security aspects of transportation equipment such as trailers, containers, train wagons or any kind of valuable mobile asset such as electricity generators, heavy machinery, chemical toilets and waste containers. The CelloTrack unit is designed for unpowered assets. It is ideal for trailers, containers, trains and other high value mobile assets. The unit includes a USB connector for programming, covered by a rubber cover for dust and water protection (IP67). The CelloTrack 10y provide a durable and long life solution that support up to 10 years of continuous operation with single GNSS reading and Cellular transmissions per day. The CelloTrack 10y supports the required network standards for NA and supports all the big service providers and their affiliates, such as AT&T, T-Mobile, Telus and Rogers. The CelloTrack 10y is based on Cello and CelloTrack Technologies and supports similar tracking, communication, GNSS location-based features and maintenance capabilities as per those available in the Cello and CelloTrack families. Other CelloTrack 10y features include: Stand-alone tracking device. Can be installed and operated for long time periods without a power supply. Houses all components in the same enclosure, including battery, GNSS positioning engine, Cellular modem and antennas. Highly rugged durable IP67 weatherproof casing for outdoor long-life service, with brackets for easy mounting. Long operation time (up to 10 years @ 1 transmission / day) via a 42.5 Ah of primary Lithium-thionyl Chloride (Li-socl2) battery capacities. design for minimum idle current consumption on hibernation Support NA LTE network with user equipment category CAT 1. Scalable Cellular communication technology – can support any cellular network supported by Cinterion modem family . CSR SiRFstarV™ based, GPS and GLONSS, positioning engine for reduced acquisition time and better accuracy. Support Wireless Sensor Network and up to 16 MultiSense devices A 3D accelerometer that detects crash (accident), movement and vibrations of assets and enables different transmission rates for a moving asset and a standing asset. A programmable (on/off/test/panic) push button. Two monitoring LEDs for GSM and GNSS status indication. A charging and communication connector.
CelloTrack 10y Overview CelloTrack T Family Overview Page 6 Copyright © 2018 by Pointer Telocation, Ltd. Easy mounting using screws or magnets. tampering detection Designed for operation w/o or minimal maintenance. (environment tests, Halt tests, Formal reliability assessments) Operating temperature range -30°C to 75°C ISO16750 compliance (Shock, temperature, humidity, UV, chemical, salt, and so on) Supports up to 9000 time-stamped events. Support variety of operation (logging and reporting frequency) profiles to meet required transmissions and power budget Advanced carrier selection algorithm. Built-in Geo-fence capabilities. Support an internal USB connector allowing RMA and debugging. Support OTA FW upgrade (FOTA). 2.2 The Need / Use in the Field The following applications / markets require a solution which can be only provided or better provided by the CelloTrack 10Y, based on a non-rechargeable battery. Nearly or completely static assets located in difficult to reach locations where CelloTrack or CelloTrack Power cannot be used / maintained. In such cases, CelloTrack LL will be a better economic solution than the regular CelloTrack. Assets which can be maintained only after a very long period, such as train cabins with maintenance period of 5-6 years. Customers who prefer minimum maintenance to units and who will use the product which has the longest life period. Install and forget applications; the unit is installed for several years after which the vehicle or asset are no longer important. For example: long term leasing where the unit is needed to track the vehicle / asset in case of payment issues. Once the last payment is received the unit is no longer needed. Tracking as an integral part of the asset applications, where the unit life matches the estimated life of the vehicle / asset. For example, a container’s life time is estimated to be 10 years; a practical solution would be a CelloTrack with a 10 year life time, which will be an integral part of the container with no maintenance needed. Applications which require extreme operating temperatures in which charging is impossible or rechargeable batteries do not perform well. 2.3 Main Advantages over the Regular CelloTrack Longer life time between maintenance procedures Low maintenance efforts and cost Wider operating temperature range (-30°C to 75°C instead of -20°C to 60°C)
CelloTrack 10y Overview CelloTrack T Family Overview Page 7 Copyright © 2018 by Pointer Telocation, Ltd. 2.4 CelloTrack 10y Feature List The following list details the features and capabilities of the CelloTrack 10y. These features are actually a combination of the Fleet management capabilities derived from Cellocator’s Cello product line and specific asset management capabilities designed solely for the CelloTrack family. Geo-Fences (100) Way Points Roaming List (100) Usage counters (PTO) Server authentication Automatic SIM PIN lock DNS support Virtual odometer Road curve smoothing Offline Tracking Wake up event Movement detection Crash detection Time based events (adaptive to movement status) Specific time (in day) reporting Distance based events Velocity Adaptive message rate Home/Roam adaptive message rate Distress reporting mode (higher priority) Over speeding alerts Go/Halt reports Internal excessive temp A/D threshold events Frequency threshold events GNSS status events Watchdog Battery level reporting Network dependent traffic Opt Cellocator+ (Maintenance) server support OTA/Serial Firmware upgrade OTA/Serial configuration update
CelloTrack 10y Overview CelloTrack T Family Overview Page 8 Copyright © 2018 by Pointer Telocation, Ltd. 3 CelloTrack Interfaces 3.1 The CelloTrack Interface The Front Button allows activation/de-activation, battery status check, battery replacement sequence, and MultiSense communication pairing. The SYS LED is a dual color (Green and Red) LED, which indicates unit activation/de-activation, panic, and battery status/replacement. The COMM LED is a dual color (Green and Red) LED, which indicates the unit Cellular communication and position status. 3.2 CelloTrack COMM LED description 3.2.1 Overview The COMM LED shall be used to indicate unit Cellular communication and position in Green light. The blinking pattern is constructed from cycles of 2 blinking zones each, which will be repeated by unit continually. The first zone represents the functionality of Cellular communication (GSM), the second zone – the GNSS status. Each zone will last 3 seconds with 1 second of LED off interval between them. 5 seconds LED Off interval will separate between each cycle. FB (Front Button) COMM LED SYS LED Installation bracket
CelloTrack 10y Overview CelloTrack T Family Overview Page 9 Copyright © 2018 by Pointer Telocation, Ltd. 4 CelloTrack 10y Specifications 4.1 CelloTrack 10y Specification Communication Cellular communication LTE Cat 1 NA with 3G Fallback LTE NA: Bands 2, 4, 5, 12 (700, 850, 1700/2100 (AWS), 1900 MHz), data rates: 10.2[DL] / 5.2[UL] Mbps 3G NA: UMTS Bands 5, 4, 2 (850, 1700/2100 (AWS), 1900); HSPA 5.76[UL]/7.2[DL] Mbps Packet Data: TCP/IP, UDP/IP SMS: PDU mode SIM Internal, full size replaceable, 1.8/3V Optional SIM on chip Remote PIN code management Antenna Internal, multi band antenna GNSS Technology Internal module, CSR SiRFstarV™ based GPS and GLONSS supported. Sensitivity (tracking) -165dBm Acquisition (normal) Cold <27 Sec, Warm<10 Sec, Hot<1 Sec Antenna Internal, on board patch antenna Interfaces COM port Via USB 2.0 interface over standard micro-USB connector Debug, Configuration, FW upgrade 3D Accelerometer 3D, ±8g range, 12 Bit representation, 4mg resolution Movement detection MMI 2 dual colored LED status indication Activation / Distress button Reed relay and magnet based Tamper detection Wireless 2.4 GHz Proprietary wireless interface for MultiSense integration. Power Internal Battery lithium-thionyl chloride (SOCl2), 3.6V, 42.5 Ah, primary (non-rechargeable) Average Current Consumption On taking location and transmission session: 85mA
CelloTrack 10y Overview CelloTrack T Family Overview Page 10 Copyright © 2018 by Pointer Telocation, Ltd. Hibernation: < 130 µA Shipment (Off): < 80 µA Environment Temp, operating -300C – 750C. Temp, storage 00C – 300C (battery limitation) Humidity 95% non-condensing Ingress Protection IP67 Vibration, Impact, Humidity, chemical ISO 16750 part 3 & 4 Mounting Screw or magnetic mounting Regulatory compliance / certification CE CE Safety EN60950-1:2001+A11:2004 FCC Part 15 Subpart B, part 22/24 compliant IC ICES-003, Issue 5:2012 Class B. CAN/CSA-CEI/IEC CISPR 22:10 PTCRB TRP, TIS, Spurious and harmonics emission AT&T Yes Environment ISO 16750 part 3 & 4 UL compliant Reliability assessment Annual Failed Ratio <0.5% HALT (Highly Accelerated Life Test) passed RoHS and conflict minerals compliant Dimensions & Weight Enclosure material Lexan 943 Dimensions ~203mm x 81mm x 50mm Weight ~ 510 gr 4.2 CelloTrack 10y – 42.5 AH Battery Life TX / 24Hrs Life time [years] 96 0.35 48 0.7
CelloTrack 10y Overview CelloTrack T Family Overview Page 11 Copyright © 2018 by Pointer Telocation, Ltd. TX / 24Hrs Life time [years] 24 1.3 12 2.4 8 3.3 6 4 4 5.2 2 7.8 1 10.7

Navigation menu