PowerFleet CTLL CelloTrack 10Y LTE C1 GC9773001-000 User Manual CelloTrack T Family Overview

Download:
Mirror Download [FCC.gov]
Document ID	3904824
Application ID	aKLy5/zLqZakqq++O+cqhA==
Document Description	User manual_CelloTrack 10y User Manual -DFT1.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.88kB (536057 bits)
Date Submitted	2018-06-28 00:00:00
Date Available	2018-07-02 00:00:00
Creation Date	2018-06-12 16:55:41
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-06-27 08:43:05
Document Title	CelloTrack T Family Overview
Document Creator	Microsoft® Word 2013
Document Author:	Natan Degani

Cellocator™ CelloTrack
10y USER Manaul
Proprietary and Confidential
Version 1.0
Revised and Updated: May 30, 2018
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
Legal Notices
IMPORTANT
1. All legal terms and safety and operating instructions should be read thoroughly before
the product accompanying this document is installed and operated.
2. This document should be retained for future reference.
3. Attachments, accessories or peripheral devices not supplied or recommended in
writing by Pointer Telocation Ltd. May be hazardous and/or may cause damage to the
product and should not, in any circumstances, be used or combined with the product.
General
The product accompanying this document is not designated for and should not be used in
life support appliances, devices, machines or other systems of any sort where any
malfunction of the product can reasonably be expected to result in injury or death.
Customers of Pointer Telocation Ltd. using, integrating, and/or selling the product for use
in such applications do so at their own risk and agree to fully indemnify Pointer Telocation
Ltd. for any resulting loss or damages.
Warranty Exceptions and Disclaimers
Pointer Telocation Ltd. Shall bear no responsibility and shall have no obligation under the
foregoing limited warranty for any damages resulting from normal wear and tear, the cost
of obtaining substitute products, or any defect that is (i) discovered by purchaser during
the warranty period but purchaser does not notify Pointer Telocation Ltd. Until after the
end of the warranty period, (ii) caused by any accident, force majeure, misuse, abuse,
handling or testing, improper installation or unauthorized repair or modification of the
product, (iii) caused by use of any software not supplied by Pointer Telocation Ltd., or by
use of the product other than in accordance with its documentation, or (iv) the result of
electrostatic discharge, electrical surge, fire, flood or similar causes. Unless otherwise
provided in a written agreement between the purchaser and Pointer Telocation Ltd., the
purchaser shall be solely responsible for the proper configuration, testing and verification
of the product prior to deployment in the field.
POINTER TELOCATION LTD.’S SOLE RESPONSIBILITY AND PURCHASER’S SOLE REMEDY
UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE PRODUCT
HARDWARE, SOFTWARE OR SOFTWARE MEDIA (OR IF REPAIR OR REPLACEMENT IS NOT
POSSIBLE, OBTAIN A REFUND OF THE PURCHASE PRICE) AS PROVIDED ABOVE.
POINTER TELOCATION LTD. EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, SATISFACTORY
PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
POINTER TELOCATION LTD. BE LIABLE FOR ANY INDIRECT, SPECIAL, EXEMPLARY,
INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS
OR INTERRUPTION OF USE, DATA, REVENUES OR PROFITS) RESULTING FROM A BREACH
OF THIS WARRANTY OR BASED ON ANY OTHER LEGAL THEORY, EVEN IF POINTER
TELOCATION LTD. HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH
DAMAGES.
CelloTrack T Family Overview
Page 2
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
Intellectual Property
Copyright in and to this document is owned solely by Pointer Telocation Ltd. Nothing in this document shall be
construed as granting you any license to any intellectual property rights subsisting in or related to the subject
matter of this document including, without limitation, patents, patent applications, trademarks, copyrights or
other intellectual property rights, all of which remain the sole property of Pointer Telocation Ltd. Subject to
applicable copyright law, no part of this document may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or
otherwise), or for any purpose, without the express written permission of Pointer Telocation Ltd.
FCC Compliance Statement
The FCC Wants You to Know
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential
installations. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio and television reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause such interference, which can be verified by
turning the device off and on, the user is encouraged to eliminate the interference
by one or more of the following measures:
Re-orient or re-locate the receiving antenna.
Increase the distance between the device and the receiver.
Connect the device to an outlet on a circuit different from the one that supplies
power to the receiver.
Consult the dealer or an experienced radio/TV technician.
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This device complies with FCC Rules Part 15 and with Industry Canada
licence-exempt RSS standard(s). Operation is subject to two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference that may be received or that may cause undesired operation.
a) Le present appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisee aux
deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d'en compromettre le
fonctionnement.
This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.
The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device must not be collocated or operating in conjunction with any other antenna or transmitter.
© Copyright 2018. All rights reserved.
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
Page 3
CelloTrack 10y Overview
Introduction
1.1
About this Document
This document provides a brief overview of the CelloTrack 10y. It includes descriptions
of CelloTrack 10y special features and modes of operation, battery life tables and
technical specifications.
1.2
1.3
Abbreviations
Abbreviation
Description
FB
GSM
GPS
GNSS
OTA
SMS
IP
3Y
8M
AH
3D
LED
APS
GPIO
Front Button
Global System for Mobile communications
Global Positioning System
Global Navigation Satellite System
Over the Air
Short Message Service (GSM)
International Protection Rating
Three Years
Eight Months
Amper Hour
3 Dimensions
Light Emitted Diode
Automatic Power Save (modem feature)
General Purpose Input / Output
References
Reference
Description
1.4
Revision History
Version
Date
Description
1.0
May 29, 2018
Initial release
Page 4
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
The CelloTrack 10y
2.1
CelloTrack 10y Overview
Cellocator's CelloTrack 10y, designed for advanced asset tracking and asset
management applications, provides enhanced functionality, ease of installation and
support for a wide range of applications.
The capabilities provided by the CelloTrack 10y can greatly reduce an enterprise's
financial losses incurred as a result of the often difficult task of successfully tracking
and remotely managing the location, usage profile and security aspects of
transportation equipment such as trailers, containers, train wagons or any kind of
valuable mobile asset such as electricity generators, heavy machinery, chemical toilets
and waste containers.
The CelloTrack unit is designed for unpowered assets. It is ideal for trailers,
containers, trains and other high value mobile assets.
The unit includes a USB connector for programming, covered by a rubber cover for
dust and water protection (IP67).
The CelloTrack 10y provide a durable and long life solution that support up to 10 years
of continuous operation with single GNSS reading and Cellular transmissions per day.
The CelloTrack 10y supports the required network standards for NA and supports all
the big service providers and their affiliates, such as AT&T, T-Mobile, Telus and
Rogers.
The CelloTrack 10y is based on Cello and CelloTrack Technologies and supports similar
tracking, communication, GNSS location-based features and maintenance capabilities
as per those available in the Cello and CelloTrack families.
Other CelloTrack 10y features include:
Stand-alone tracking device. Can be installed and operated for long time periods
without a power supply.
Houses all components in the same enclosure, including battery, GNSS positioning
engine, Cellular modem and antennas.
Highly rugged durable IP67 weatherproof casing for outdoor long-life service, with
brackets for easy mounting.
Long operation time (up to 10 years @ 1 transmission / day) via a 42.5 Ah of
primary Lithium-thionyl Chloride (Li-socl2) battery capacities.
design for minimum idle current consumption on hibernation
Support NA LTE network with user equipment category CAT 1.
Scalable Cellular communication technology – can support any cellular network
supported by Cinterion modem family .
CSR SiRFstarV™ based, GPS and GLONSS, positioning engine for reduced
acquisition time and better accuracy.
Support Wireless Sensor Network and up to 16 MultiSense devices
A 3D accelerometer that detects crash (accident), movement and vibrations of
assets and enables different transmission rates for a moving asset and a standing
asset.
A programmable (on/off/test/panic) push button.
Two monitoring LEDs for GSM and GNSS status indication.
A charging and communication connector.
Page 5
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
Easy mounting using screws or magnets.
tampering detection
Designed for operation w/o or minimal maintenance. (environment tests, Halt
tests, Formal reliability assessments)
Operating temperature range -30°C to 75°C
ISO16750 compliance (Shock, temperature, humidity, UV, chemical, salt, and so
on)
Supports up to 9000 time-stamped events.
Support variety of operation (logging and reporting frequency) profiles to meet
required transmissions and power budget
Advanced carrier selection algorithm.
Built-in Geo-fence capabilities.
Support an internal USB connector allowing RMA and debugging.
Support OTA FW upgrade (FOTA).
2.2
The Need / Use in the Field
The following applications / markets require a solution which can be only provided or
better provided by the CelloTrack 10Y, based on a non-rechargeable battery.
Nearly or completely static assets located in difficult to reach locations where
CelloTrack or CelloTrack Power cannot be used / maintained. In such cases,
CelloTrack LL will be a better economic solution than the regular CelloTrack.
Assets which can be maintained only after a very long period, such as train cabins
with maintenance period of 5-6 years.
Customers who prefer minimum maintenance to units and who will use the product
which has the longest life period.
Install and forget applications; the unit is installed for several years after which the
vehicle or asset are no longer important. For example: long term leasing where the
unit is needed to track the vehicle / asset in case of payment issues. Once the last
payment is received the unit is no longer needed.
Tracking as an integral part of the asset applications, where the unit life matches
the estimated life of the vehicle / asset. For example, a container’s life time is
estimated to be 10 years; a practical solution would be a CelloTrack with a 10 year
life time, which will be an integral part of the container with no maintenance
needed.
Applications which require extreme operating temperatures in which charging is
impossible or rechargeable batteries do not perform well.
2.3
Main Advantages over the Regular CelloTrack
Longer life time between maintenance procedures
Low maintenance efforts and cost
Wider operating temperature range (-30°C to 75°C instead of -20°C to 60°C)
Page 6
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
2.4
CelloTrack 10y Feature List
The following list details the features and capabilities of the CelloTrack 10y. These
features are actually a combination of the Fleet management capabilities derived from
Cellocator’s Cello product line and specific asset management capabilities designed
solely for the CelloTrack family.
Geo-Fences (100)
Way Points
Roaming List (100)
Usage counters (PTO)
Server authentication
Automatic SIM PIN lock
DNS support
Virtual odometer
Road curve smoothing
Offline Tracking
Wake up event
Movement detection
Crash detection
Time based events (adaptive to movement status)
Specific time (in day) reporting
Distance based events
Velocity Adaptive message rate
Home/Roam adaptive message rate
Distress reporting mode (higher priority)
Over speeding alerts
Go/Halt reports
Internal excessive temp
A/D threshold events
Frequency threshold events
GNSS status events
Watchdog
Battery level reporting
Network dependent traffic Opt
Cellocator+ (Maintenance) server support
OTA/Serial Firmware upgrade
OTA/Serial configuration update
Page 7
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
CelloTrack Interfaces
3.1
The CelloTrack Interface
FB (Front Button)
COMM LED
SYS LED
Installation bracket
The Front Button allows activation/de-activation, battery status check, battery
replacement sequence, and MultiSense communication pairing.
The SYS LED is a dual color (Green and Red) LED, which indicates unit
activation/de-activation, panic, and battery status/replacement.
The COMM LED is a dual color (Green and Red) LED, which indicates the unit
Cellular communication and position status.
3.2
CelloTrack COMM LED description
3.2.1 Overview
The COMM LED shall be used to indicate unit Cellular communication and position in
Green light.
The blinking pattern is constructed from cycles of 2 blinking zones each, which will be
repeated by unit continually. The first zone represents the functionality of Cellular
communication (GSM), the second zone – the GNSS status.
Each zone will last 3 seconds with 1 second of LED off interval between them. 5 seconds
LED Off interval will separate between each cycle.
Page 8
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
4.1
CelloTrack 10y Specifications
CelloTrack 10y Specification
Communication
LTE Cat 1 NA with 3G Fallback
LTE NA: Bands 2, 4, 5, 12 (700, 850, 1700/2100 (AWS),
1900 MHz), data rates: 10.2[DL] / 5.2[UL] Mbps
Cellular
communication
3G NA: UMTS Bands 5, 4, 2 (850, 1700/2100 (AWS),
1900); HSPA 5.76[UL]/7.2[DL] Mbps
Packet Data: TCP/IP, UDP/IP
SMS: PDU mode
Internal, full size replaceable, 1.8/3V
SIM
Optional SIM on chip
Remote PIN code management
Antenna
Internal, multi band antenna
GNSS
Internal module, CSR SiRFstarV™ based
Technology
GPS and GLONSS supported.
Sensitivity (tracking)
-165dBm
Acquisition (normal)
Cold <27 Sec, Warm<10 Sec, Hot<1 Sec
Antenna
Internal, on board patch antenna
Interfaces
COM port
3D Accelerometer
Via USB 2.0 interface over standard micro-USB connector
Debug, Configuration, FW upgrade
3D, ±8g range, 12 Bit representation, 4mg resolution
Movement detection
2 dual colored LED status indication
MMI
Activation / Distress button
Reed relay and magnet based Tamper detection
Wireless
2.4 GHz Proprietary wireless interface for MultiSense
integration.
Power
Internal Battery
Average Current
Consumption
lithium-thionyl chloride (SOCl2), 3.6V, 42.5 Ah, primary
(non-rechargeable)
On taking location and transmission session: 85mA
CelloTrack T Family Overview
Page 9
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
Hibernation: < 130 µA
Shipment (Off): < 80 µA
Environment
Temp, operating
-300C – 750C.
Temp, storage
00C – 300C (battery limitation)
Humidity
95% non-condensing
Ingress Protection
IP67
Vibration, Impact,
ISO 16750 part 3 & 4
Humidity, chemical
Mounting
Screw or magnetic mounting
Regulatory compliance / certification
CE
CE Safety EN60950-1:2001+A11:2004
FCC
Part 15 Subpart B, part 22/24 compliant
ICES-003, Issue 5:2012 Class B.
IC
CAN/CSA-CEI/IEC CISPR 22:10
PTCRB
TRP, TIS, Spurious and harmonics emission
AT&T
Yes
Environment
ISO 16750 part 3 & 4
UL
compliant
Reliability assessment
Annual Failed Ratio <0.5%
HALT (Highly Accelerated
Life Test)
passed
RoHS and conflict
minerals
compliant
Dimensions & Weight
Enclosure material
Lexan 943
Dimensions
~203mm x 81mm x 50mm
Weight
4.2
~ 510 gr
CelloTrack 10y – 42.5 AH Battery Life
TX / 24Hrs
Life time [years]
96
0.35
48
0.7
Page 10
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.
CelloTrack 10y Overview
TX / 24Hrs
Life time [years]
24
1.3
12
2.4
3.3
5.2
7.8
10.7
Page 11
CelloTrack T Family Overview
Copyright © 2018 by Pointer Telocation, Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Natan Degani
Create Date                     : 2018:06:12 16:55:41+03:00
Modify Date                     : 2018:06:27 08:43:05-04:00
Has XFA                         : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Natan Degani
Title                           : CelloTrack T Family Overview
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2018:06:27 08:43:05-04:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:8d177c96-8c2d-4bcd-993b-5d319cc913fe
Instance ID                     : uuid:657821fb-013f-4424-8759-ba97d296c417
Page Count                      : 11

EXIF Metadata provided by EXIF.tools