Prime Electronics and Satellitics WM288P Wireless LAN mini - PCI Card User Manual System Spec

Download:
Mirror Download [FCC.gov]
Document ID	323251
Application ID	1RMZQL5SlKztFfNpbXEiyA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.19kB (1114865 bits)
Date Submitted	2003-05-06 00:00:00
Date Available	2003-05-06 00:00:00
Creation Date	2002-11-13 17:46:07
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-05-05 19:32:50
Document Title	System Spec
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	R&D Wireless Group

編號：WM288PF00000 SP01 版次：A 版
33333333
百一電子股份有限公司
Prime Electronics & Satellitics Inc.
產品規格書
適用機種：WM288P
WLAN CARD WM288P
Specifications
1. General specification
2. Standard test condition
3. Electrical specification
4. Frequency channel plan
核准：
審查：
製表：
莊繐瑄
修訂日期：
年
制定日期：
月
日
2003 年 1 月 22 日
Page : 1/3
No.
1.
Specification
Item
Condition
Min.
Typ.
Max.
Test Method/Condition
General specification
1-1. Standard
1-2.
Frequency Band(MHz)
1-3.
No. of
Selectable
Channels
IEEE 802.11b
2400
2483.5
11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)
1-4.
Channel Spacing (MHz)
1-5.
Modulation Technique
DSSS (CCK, DQPSK, DBPSK)
1-6.
Spreading
11-chip Barker Sequence
1-7.
Media Access Protocol
CSMA/CA(collision Avoidance) with
ACK
1-8.
Interface
Mini PCI Type III A
1-9.
Dimensions
60.0 mm x 45.0 mm x 3.5 mm
1-10. LED Indicators
non
1-11. Antenna Connector
Hirose U.FL-R-SMT
2.
Standard Test Condition
2-1.
Supply voltage(V)
3.
Electrical
Specification
3-1.
Power Consumption
3.3
Temperature Range：0 ~ 55℃
Humidity：95 % (Non-condensing)
@+3.3V
(mA)
3-2
3-3.
150
Receiver Mode
260
Transmit Mode
Receive Sensitivity
-82
(dBm)[FER < 8%]
-87
@ 5.5 Msps
-90
@ 2 Msps
-92
@ 1 Msps
Average Output Power
10
-84
@ 11 Msps
11
@29.5dB difference between the signal
(dBm)
level at center frequency and higher
first side lobe
3-4
Frequency Accuracy(ppm)
- 25
+ 25
Page : 2/3
4. Frequency channel plan
Regulation Domains
Channel_ID Frequency
(Mhz)
FCC
IC
ETSI
Spain
France
MKK
(X ’10’ )
(X ‘20’ )
(X ’30‘ )
(X ’31‘ )
(X ‘32’ )
(X ‘40’ )
2412
2417
2422
2427
2432
2437
2442
2447
2452
10
2457
11
2462
12
2467
13
2472
14
2484
Page : 3/3
AMD Confidential
Manufacturing Test Suite
User’s Manual
A Utility for Testing the
Am1772™ Mini PCI
Reference Design Kit
Version 0.2
MTS User Guide
© 2002 Advanced Micro Devices, Inc. All
rights reserved.
The contents of this document are provided in connection with Advanced
Micro Devices, Inc. (“AMD”) products. AMD makes no representations or
warranties with respect to the accuracy or completeness of the contents of this
publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. No license, whether express,
implied, arising by estoppel, or otherwise, to any intellectual property rights
are granted by this publication. Except as set forth in AMD’s Standard Terms
and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products including, but not
limited to, the implied warranty of merchantability, fitness for a particular
purpose, or infringement of any intellectual property right.
AMD’s products are not designed, intended, authorized or warranted for use
as components in systems intended for surgical implant into the body, or in
other applications intended to support or sustain life, or in any other
application in which the failure of AMD’s product could create a situation
where personal injury, death, or severe property or environmental damage may
occur. AMD reserves the right to discontinue or make changes to its products
at any time without notice.
Contacts
www.amd.com wlan.support@amd.com
Trademarks
AMD, the AMD Arrow logo, Alchemy, and combinations thereof, and Am1770, Am1771, and Am1772
are trademarks of Advanced Micro Devices, Inc.
Other product names used in this publication are for identification purposes only and may be trademarks of
their respective companies.
AMD Confidential
AMD Confidential
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between
computer mounted antenna and person’s body (excluding extremities of
hands, wrist and feet) during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an
uncontrolled environment.
MTS User Guide
Table of Contents
Overview
Installation
MTS Tests
3.1
Customized Transmit Modes
3.2
Transmit Continuous with Modulation
3.3
Transmit Packets with Modulation
3.4
Receive and Display PER
10
3.5
Unicast or Multicast Frame Transmit
11
3.6
Unicast or Multicast Frame Receive
12
3.7
Duty Cycle Measurement
13
3.8
Power Save and Awake
14
AMD Confidential
MTS User Guide
Overview
The AMD Manufacturing Test Suite (MTS) provides advanced functionalities, such as pure
carrier wave generation, upper and lower side band data generation, RF carrier
suppression, Tx Modulation Accuracy, BPSK, QPSK, Carrier 5.5, Carrier 11, Packet Error
Rate (PER) Measurement, 25% Duty Cycle, Power Save/Awake, Tx/Rx Traffic generation
in MAC mode and MAC Bypass Modes.
The following table shows the test suite’s eight modes and their features.
MTS Test Mode
Features
Run Mode
Customized Transmit Modes
Carrier 1, Carrier 2, Upper Side
Band, Lower Side Band,
Randomized, Customized, RF
Carrier Suppression, Tx Modulation
Accuracy
Mac Bypass
Transmit Continuous With
Modulation
BPSK, QPSK, CCK 5.5, CCK 11 with
Scrambler On/Off, Data 101010,
111111, Random, Custom.
Mac Bypass
Transmit Packets With
Modulation
Transmit Broadcast Frames
Mac Bypass
Receive and Display PER
Receive Frames and Display Packet
Error Rate (PER)
Mac Bypass
Unicast and Multicast Frame
Transmit
Start/Join an Adhoc BSS and do
unicast or multicast (broadcast)
frame transmit/receive.
Mac Mode
Unicast and Multicast Frame
Receive
Join the Adhoc BSS started above
in #5 and receive frames.
Mac Mode
Duty Cycle Measurement
25% Duty Cycle Measurement
Mac Bypass
Power Save and Awake
Place device in Sleep and then
Awake it.
N/A
NOTE: mts.exe runs advanced baseband functionality that involves MAC tunneling. Please
do NOT run Am1772 Terminal.exe or AtlasCfg.exe while mts.exe is running.
AMD Confidential
MTS User Guide
Installation
Step #1: Install the Am1772™ Terminal application. See Am1772™ Terminal User’s
Manual.
Step #2: The MTS application, MTS.EXE, should be within the above software pack. Save
it to the local drive and create a shortcut to it on the desktop. Run MTS.EXE. The following
Main Screen will be displayed:
AMD Confidential
MTS User Guide
Clicking on the About property page displays the following screen:
AMD Confidential
MTS User Guide
MTS Tests
From the main test suite window, select a test to be performed. The following sections
describe each test.
3.1
Customized Transmit Modes
Select the appropriate configuration and click Start to initiate the selected Tx Mode. To
change the configuration, first click Stop, change the configuration, and then Start again.
After the test click Close.
Customized Transmit Modes
AMD Confidential
MTS User Guide
3.2
Transmit Continuous with Modulation
Select the appropriate configuration and click Start to initiate the selected modulation. To
change the configuration first click Stop, change the configuration, and then Start again.
After the test, click Close.
Transmit Continuous with Modulation
AMD Confidential
MTS User Guide
3.3
Transmit Packets with Modulation
Select the appropriate configuration and click Start to initiate the selected Tx mode. To
change the configuration first click Stop, change the configuration, and then Start again.
After the test, click Close.
Transmit Packets with Modulation
AMD Confidential
MTS User Guide
3.4
Receive and Display PER
Select the appropriate configuration and click Start to initiate the selected mode. After
selection press the Start button to see traffic with another InfraAP or Adhoc IBSS station
that is required for this test mode. Alternatively, use another notebook that is in unicast
transmit mode.
To change the configuration first click Stop, change the configuration, and then Start
again. After the test, click Close.
Receive and Display PER
10
AMD Confidential
MTS User Guide
3.5
Unicast or Multicast Frame Transmit
Set up the required configuration first. Press the “Smart Connect” button. After activation
the left button switches from “NO NETWORK” to “STARTED” mode. This means an Adhoc
BSS has been started with SSID “AMD 802.11 MTS Network”. Now setup the required
PAYLOAD in bytes. Next, press “START” for start test mode, whereby after starting, the
“IDLE” button switches to “RUNNING”. Now validation over statistics is possible.
Unicast or Multicast Frame Transmit.
Note that this is a two-machine test. Start this mode on one machine and on another
machine run the MTS test “Unicast or Multicast Frame Transmit” and see it “Joining” the
network started by this test, that is, the “AMD 802.11 MTS Network”.
11
AMD Confidential
MTS User Guide
3.6
Unicast or Multicast Frame Receive
This is part of a two-machine test. Use the MTS mode “Unicast or Multicast Transmit” on
another machine to start an Adhoc BSS. (See previous section.) Now, set up the required
configuration first (make sure the Rx Channel is the same as that on the second machine
on which a BSS Start was done using Unicast or Multicast Transmit mode). Now push the
“JOIN” button, whereby after activation, the “No Network” button switches to “Joined…”.
Now validation over statistics is possible.
Unicast or Multicast Frame Receive.
Note, if “Started !” is displayed instead of “Joined…”, it means either the Rx channel was
not selected properly or the Adhoc BSS “AMD 802.11 MTS Network” was not started or is
out-of-range on the second machine. Please click the Join button again to disconnect,
verify setup and Join again.
12
AMD Confidential
MTS User Guide
3.7
Duty Cycle Measurement
Set up the required configuration first. Press the “START” button next for the test,
whereby the “IDLE” button switches to “RUNNING”. Now validation over statistics is
possible.
Duty cycle measurement
13
AMD Confidential
MTS User Guide
3.8
Power Save and Awake
This mode configures the power save mode for various system-level measurements.
After finalization of the test series, pressing the “OK” button wakes the system.
14
AMD Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:05:05 19:32:50-06:00
Subject                         : WLAN 802.11 b
Create Date                     : 2002:11:13 17:46:07-06:00
Page Count                      : 18
Creation Date                   : 2002:11:13 17:46:07-06:00
Mod Date                        : 2003:05:05 19:32:50-06:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : R&D Wireless Group
Metadata Date                   : 2003:05:05 19:32:50-06:00
Creator                         : R&D Wireless Group
Title                           : System Spec
Description                     : WLAN 802.11 b
Page Mode                       : UseNone
Has XFA                         : No
Tagged PDF                      : No

EXIF Metadata provided by EXIF.tools