Proform 248333 Crosswalk 395 Treadmill Users Manual

2015-04-13

: Proform Proform-248333-Crosswalk-395-Treadmill-Users-Manual-697196 proform-248333-crosswalk-395-treadmill-users-manual-697196 proform pdf

Open the PDF directly: View PDF .
Page Count: 28

Download
Open PDF In Browser	View PDF

Model No. 831.24833.3
Serial No.
Write the serial number in the space
above for reference.

Serial Number
Decal
• Assembly
• Operation
• Maintenance
• Part List and Drawing

Sears, Roebuck and Co.
Hoffman Estates, IL 60179

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.

TREADMILL EXERCISER
User’s Manual

TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
90-DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING DECAL PLACEMENT
This drawing shows the location(s) of
the warning decal(s). If a decal is missing or illegible, call 1-888-533-1333
and request a free replacement decal.
Apply the decal in the location shown.
Note: The decal(s) may not be shown at
actual size.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of burns, fire, electric shock, or injury to persons, read
all important precautions and instructions in this manual and all warnings on your treadmill before
using your treadmill. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

12. Plug the power cord into a surge suppressor
(not included), and plug the surge suppressor into an appropriate outlet (see page 13).
To avoid overloading the circuit, do not plug
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.

2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
3. Use the treadmill only as described in this
manual.

13. Use only a surge suppressor that meets all of
the specifications described on page 13. To
purchase a surge suppressor, see your local
Sears dealer, call the telephone number on
the back cover of this manual, or see your
local electronics store.

4. The treadmill is intended for home use only.
Do not use the treadmill in any commercial,
rental, or institutional setting.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

14. Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.

6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

15. Keep the power cord and the surge suppressor away from heated surfaces.
16. Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 20 if the treadmill is not working properly.)

7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
8. Keep children under age 12 and pets away
from the treadmill at all times.

17. Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on
page 15).

9. The treadmill should be used only by persons weighing 300 lbs. (136 kg) or less.
10. Never allow more than one person on the
treadmill at a time.

18. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.

11. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.

19. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.

24. Do not change the incline of the treadmill by
placing objects under the treadmill.

20. The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.

25. Never insert any object into any opening on
the treadmill.
26. Inspect and properly tighten all parts of the
treadmill regularly.

21. Never leave the treadmill unattended while
it is running. Always remove the key, press
the power switch into the off position (see
the drawing on page 5 for the location of the
power switch), and unplug the power cord
when the treadmill is not in use.

27.

22. Do not attempt to move the treadmill until
it is properly assembled. (See ASSEMBLY
on page 7 and HOW TO FOLD AND MOVE
THE TREADMILL on page 19.) You must be
able to safely lift 45 lbs. (20 kg) to move the
treadmill.

DANGER:

Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.

28. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.

23. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.

SAVE THESE INSTRUCTIONS

BEFORE YOU BEGIN
Thank you for selecting the new PROFORM®
CROSSWALK 395 treadmill. The CROSSWALK 395
treadmill provides an impressive selection of features
designed to make your workouts at home more effective and enjoyable.

reading this manual, please see the back cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.

For your benefit, read this manual carefully before
you use the treadmill. If you have questions after

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Length: 5 ft. 5 in. (165 cm)
Width: 2 ft. 9 in. (84 cm)

Accessory Tray
Console
Heart Rate Monitor

Handrail
Storage Latch

Key/Clip

Upper Body Arm

Motor Hood
Power Switch
Walking Belt
Foot Rail

Wheel
Platform Cushion

Idler Roller
Adjustment Screws

PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is
preattached. If it is not, call 1-888-533-1333. Extra parts may be included.

1/4" Star
Washer
(23)—4

3/8" Star
Washer (3)–10

#8 x 3/4"
Screw (4)–4

#8 x 1"
Screw (7)–4

1/4" x 3 1/2" Screw (56)—4

3/8" x 3 1/4" Screw (2)–6

1/4" Star Washer
(23)—4

#8 x 1/2" Ground
Screw (1)–1

#10 x 1 1/2"
Screw (8)–2

ASSEMBLY
• Assembly requires two persons.

• To identify small parts, see page 6.

• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.

• Assembly requires the following tools:
the included hex keys
one Phillips screwdriver

• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.

scissors
To avoid damaging parts, do not use power tools.

• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
1.
Go to www.proform.com/registration on your
computer and register your product.

• activates your warranty

• saves you time if you ever need to contact
Customer Care

• allows us to notify you of upgrades and offers

Note: If you do not have Internet access, call
1-888-533-1333 and register your product.

2. Make sure that the power cord is unplugged.

Remove and discard the two screws (A) and
the shipping bracket (B) from the right side of
the Base (74). Then, remove and discard the
screws and shipping bracket (not shown)
from the left side of the Base.

A
74

3. Locate the Upright Wire (63) bundled between
the Base (74) and the Belly Pan (52). Remove
all ties securing the Upright Wire. Route the
Upright Wire into the Base and out of the indicated hole.

Press a Base Cap (70) into each side of the
Base (74).
See the inset drawing. Cut the plastic tie near
the Upright Wire (63). Be careful not to damage the Upright Wire.

74
Ties
63

4. Identify the Right Upright (76). Have a second
person hold the Right Upright near the
Base (74).

Tie
Cut

Hole

See the inset drawing. Tie the wire tie in the
Right Upright (76) securely around the end of
the Upright Wire (63). Then, insert the Upright
Wire into the lower end of the Right Upright as
you pull the other end of the wire tie through the
Right Upright.

Wire
Tie

5. Hold the Right Upright (76) against the Base
(74). Be careful not to pinch the Upright
Wire (63).

5
76

Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star
Washer (3) into the top hole in the Right Upright
(76). Then, partially tighten the Screw into the
Base (74).
Partially tighten two more 3/8" x 3 1/4" Screws
(2) with two 3/8" Star Washers (3) into the Right
Upright (76) and the Base (74); do not fully
tighten the Screws yet.

Attach the Left Upright (not shown) in the
same way. Note: There are no wires on the left
side.

63
74

6. Identify the Left and Right Handrails (59, 64).
Remove the four 5/16" x 3/4" Screws (5) and
four 5/16" Star Washers (6) from the bottoms
and sides of each Handrail.

6
63

5, 6
64

Hold the Right Handrail (64) near the Right
Upright (76). Insert the wire tie on the Upright
Wire (63) through the hole in the bottom and pull
it out of the hole in the side of the Right Handrail
as shown. Then, pull the Upright Wire through
the Right Handrail.

6
5, 6

Attach the Right Handrail (64) to the Right
Upright (76) with two of the 5/16" x 3/4" Screws
(5) and two of the 5/16" Star Washers (6) that
you just removed. Make sure not to pinch the
Upright Wire (63). Start both Screws, and
then tighten them.

5
76

6
5

Attach the Left Handrail (59) to the Left
Upright (66) as described above. Note: There
are no wires on the left side.

7. Position the Console Crossbar (61) between
the Left and Right Handrails (59, 64) with the
Console Ground Wire (47) positioned as shown.

7
47

Attach the Console Crossbar (61) to the Left and
Right Handrails (59, 64) with the other four 5/16"
x 3/4" Screws (5) and the other four 5/16" Star
Washers (6) that you removed in step 6. Start
all four Screws, and then tighten them.

C
64

61
6
5

See the inset drawing. Insert the included tie
(C) through the indicated holes in the top and
bottom of the Right Handrail (64) as shown.
Make sure that the Upright Wire (63) has been
secured to the side shown and then tighten the
wire tie.

64
63
C

8. With the help of a second person, hold the console assembly near the Right Handrail (64).

See the inset drawing. Connect the Upright
Wire (63) to the console wire. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.

Console
Assembly

Console
Wire
Ground
Wire

63
64

Connect the Console Ground Wire (47) on the
Console Crossbar (61) to the ground wire on the
console.

Wire
Tie

Console
Wire
63

9. Insert the wires into the Right Handrail (64)
through the indicated hole as you set the console assembly on the Left and Right Handrails
(59, 64). Make sure that no wires are pinched.

Attach the console assembly with four #8 x 3/4"
Screws (4). Start all four Screws, and then
tighten them. Do not overtighten the Screws.

Cut and remove the wire tie (C).

See assembly step 5. Firmly tighten the six 3/8"
x 3 1/4" Screws (2) on the lower ends of the Left
and Right Uprights (66, 76) (only one side is
shown).

Console Assembly

64
C

Wires

Ground
Wires

Hole
4

10. Attach the two Console Clamps (45) to the console assembly with four #8 x 1" Screws (7).

Console
Assembly

45
7

11. Identify the Left and Right Upper Body
Arms (44, 34).

Make sure that the Left Upper Body Arm (44)
is positioned as shown. Attach the Left Upper
Body Arm to the Left Upright (66) with two 1/4" x
3 1/2" Screws (56), two 1/4" Star Washers (23),
and two 3/8" Star Washers (3) as shown. Do not
overtighten the Screws.

Attach the Right Upper Body Arm (34) as
described above.

3
34

56
23

12. Orient the Latch Pin Assembly (68) so that the
knob is on the indicated side. Attach the Latch
Pin Assembly with the Latch Spacer (82) to the
Left Upright (66) with two #10 x 1 1/2" Screws
(8). Start both Screws, and then tighten them.
Be careful not to overtighten the Screws.

82
Knob

13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page
21). Note: Extra parts may be included.

OPERATION AND ADJUSTMENT
HOW TO CONNECT THE POWER CORD

nominal 120-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do
not plug other electrical devices, except for lowpower devices such as cell phone chargers, into
the surge suppressor or into an outlet on the same
circuit. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.

Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’s
power. Voltage surges, spikes, and noise interference can result from weather conditions or from other
appliances being turned on or off. To decrease the
risk of damaging the treadmill, always use a surge
suppressor with the treadmill. To purchase a surge
suppressor, see precaution 13 on page 3.

Grounded Outlet
Grounding Pin

Use only a surge suppressor that is UL 1449 listed as a
transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must
be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill
and serious injury to users.

Grounding Pin

Surge
Suppressor

Plug in the Power Cord

A temporary
adapter may
be used to
connect the
surge suppressor to
a 2-pole
receptacle
if a properly
grounded
outlet is not
available.

The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a
grounding pin (see drawing 1 on this page).

DANGER: Improper connection

of the power cord increases the risk of electric shock. Do not modify the plug—if it will
not fit an outlet, have a proper outlet installed
by a qualified electrician. If you are unsure
whether the treadmill is properly grounded,
contact a qualified electrician.

2-pole Receptacle
Adapter

Lug
Metal
Screw

The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box
cover is grounded. The temporary adapter should
be used only until a properly grounded outlet can
be installed by a qualified electrician.

Plug the power cord into a surge suppressor, and plug
the surge suppressor into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. The outlet must be on a

CONSOLE DIAGRAM

Key
Clip

To turn on the power, see page 15. To use the manual mode, see page 15. To use a preset workout,
see page 17. To use the information mode, see
page 18.

FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable.

IMPORTANT: If there is a sheet of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 21).

When you use the manual mode, you can change the
speed and incline of the treadmill with the touch of a
button. As you exercise, the console will display instant
exercise feedback. You can even measure your heart
rate using the handgrip heart rate monitor.
In addition, the console offers sixteen preset workouts.
Eight of these use the crosswalk arms, and the other
eight are designed to help you meet your weight-loss
goals. Each workout automatically controls the speed
and incline of the treadmill as it guides you through an
effective exercise session.

Note: The console can display speed and distance
in either miles or kilometers. To find out which unit of
measurement is selected or to change the unit of measurement, see THE INFORMATION MODE on page
18. Note: For simplicity, all instructions in this section
refer to miles.

HOW TO TURN ON THE POWER

HOW TO USE THE MANUAL MODE

IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.

1. Insert the key into the console.

Plug in the power cord (see
page 13). Next, locate the
power switch on the treadmill frame near the power
cord. Press the power switch
into the reset position.

When the key is inserted, the manual mode will be
selected. If a preset workout has been selected,
remove the key and then reinsert it.

See HOW TO TURN ON THE POWER at the left.
2. Select the manual mode.

Reset

3. Start the walking belt.

To start the walking belt, press the Start button, the
Speed increase button, or one of the speed buttons
numbered 2 through 10.

IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
18 to turn off the demo mode.

If you press the Start button or the Speed increase
button, the walking belt will begin to move at 1 mph.
As you exercise, change the speed of the walking
belt as desired by pressing the Speed increase and
decrease buttons. Each time you press a button,
the speed setting will change by 0.1 mph; if you
hold down a button, the speed setting will change
in increments of 0.5 mph. Note: After you press a
button, it may take a moment for the walking belt to
reach the selected speed setting.

Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing on page 14)
and slide the clip onto the waistband of your clothes.
Then, insert the key into the console. After a moment,
the displays will light. IMPORTANT: In an emergency
situation, the key can be pulled from the console,
causing the walking belt to slow to a stop. Test the
clip by carefully taking a few steps backward; if the
key is not pulled from the console, adjust the position of the clip.

If you press one of the numbered speed buttons,
the walking belt will gradually change speed until it
reaches the selected speed setting.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button or the Speed
increase button.
4. Change the incline of the treadmill as desired.
To change the incline
of the treadmill, press
the Incline increase
or decrease buttons.
Each time you press
the Incline increase or
decrease button, the incline will change by 0.5
percent. Note: After you press a button, it may take
a moment for the treadmill to reach the selected
incline setting.

5. Follow your progress with the displays.

6. Measure your heart rate if desired.

The far left display—
When you select the
manual mode, the matrix
will display a track that
represents 1/4 mile (400
m). As you exercise,
the indicators around
the track will appear in succession until the entire
track appears. The track will then disappear and the
indicators will again begin to appear in succession.

The lower left display—
As you exercise, the
lower left display can
show the elapsed time
and the distance that
you have walked or run.
The lower left display will
also show the incline of the treadmill each time the
incline level changes.

Before using the
handgrip heart
rate monitor, remove the sheets
of plastic from the
metal contacts
on the console.
In addition, make
sure that your
hands are clean.

The lower right
display—The lower right
display can show the
approximate number of
calories that you have
burned and the speed of
the walking belt. The display also shows your heart
rate when you use the handgrip heart rate monitor
(see step 6).

7. When you are finished exercising, remove the
key from the console.

Contacts

To measure your heart rate, stand on the foot
rails and hold the metal contacts on the console.
Avoid moving your hands. When your pulse is
detected, a heart symbol in the lower right display
will flash each time your heart beats, one or two
dashes will appear, and then your heart rate will be
shown. For the most accurate heart rate reading,
continue to hold the contacts for about 15
seconds.

Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero. The
incline must be at zero or you may damage the
treadmill when you fold it to the storage position.
Next, remove the key from the console and put it in a
secure place.

The upper
display—The
upper display
can show the
elapsed time,
the distance that
you have walked or run, the approximate number
of calories that you have burned, or the speed of
the walking belt. Press the Display button repeatedly until the upper display shows the information
that you are most interested in viewing. Note: While
information is shown in the upper display, the same
information will not be shown in the lower displays.

When you are finished using the treadmill, press the
power switch into the off position and unplug the
power cord. IMPORTANT: If you do not do this,
the treadmill’s electrical components may wear
prematurely.

To reset the displays, press the Stop button, remove the key, and then reinsert the key.

HOW TO USE A PRESET WORKOUT

will begin to flash. If a new speed and/or incline
setting is programmed for the next segment, the
new speed and/or incline setting will appear in the
displays. The treadmill will then automatically adjust to the new speed and/or incline setting.

1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a preset workout.

If you have selected a crosswalk workout, you will
be prompted to use the crosswalk arms. When the
crosswalk indicator on the console lights up, move
the crosswalk arms forward and backward as you
walk on the treadmill. This action exercises your
arms, shoulders, and back for a total body workout.

To select a preset workout, press the Crosswalk
Workouts button or the
Wt. Loss Workouts button repeatedly until the
number of the desired
workout appears in the upper display.

The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.

When you select a preset workout, the incline level
of the workout will flash in the lower left display, the
speed setting will flash in the lower right display,
and then the workout length will appear in the
lower left display. In addition, a profile of the speed
settings of the workout will appear in the far left
display.

If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or Incline
buttons; however, when the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.

3. Press the Start button or the Speed increase
button to start the workout.

To stop the workout at any time, press the Stop
button. To restart the workout, press the Start button. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for the next segment.

A moment after you press the button, the treadmill
will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and
begin walking.
Each workout is divided into 30 one-minute segments. One speed setting and one incline setting
are programmed for each segment. Note: The
same speed setting and/or incline setting may be
programmed for consecutive segments.

4. Follow your progress with the displays.
See step 5 on page 16.
5. Measure your heart rate if desired.

During the workout, the
Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout. The height of the
flashing segment indicates the speed setting for
the current segment. At the end of each segment, a
tone will sound and the next segment of the profile

See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.

See step 7 on page 16.

THE INFORMATION MODE

HOW TO USE THE CROSSWALK ARMS

The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilometers,
and to turn the display demo mode on and off.

As you walk on the treadmill, you can hold the handrails or use the crosswalk arms. To exercise your arms,
shoulders, and back for a total body workout, move the
crosswalk arms forward and backward as you walk on
the treadmill.
To vary the intensity of your upper body exercise, the
resistance of the crosswalk arms can be adjusted. To
increase the resistance, turn the resistance knobs
clockwise; to decrease the resistance, turn the knobs
counterclockwise.

To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An “E” for English miles or
an “M” for metric kilometers
will appear in the lower right
display. Press the Speed
increase button to change
the unit of measurement if
desired.
The lower left display will
show the total number of
miles (or kilometers) that
the walking belt has moved.

Crosswalk
Arms

The upper display will show
the total number of hours
that the treadmill has been
used.

Resistance
Knobs

The console features a display demo mode, designed
to be used if the treadmill is displayed in a store.
While the demo mode is turned on, the console will
function normally when you plug in the power cord,
press the power switch into the reset position, and
insert the key into the console. However, when you
remove the key, the displays will remain lit, although
the buttons will not function. If the demo mode is turned
on, a “d” will appear in the lower right display while the
information mode is selected. To turn on or off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL

HOW TO MOVE THE TREADMILL

Before folding the treadmill, adjust the incline to
zero. If you do not do this, you may damage the
treadmill when you fold it. Remove the key and
unplug the power cord. CAUTION: You must be able
to safely lift 45 lbs. (20 kg) to raise, lower, or move
the treadmill.

efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch pin is fully
inserted into the platform cushion. Moving the
treadmill may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.

1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.

Frame

Handrail

Frame
Wheel
2. Hold the frame firmly with your right hand. Pull the
latch knob to the left and hold it. Raise the frame
until the hole in the platform cushion is aligned with
the latch pin. Then, slowly release the latch knob;
make sure that the latch pin is fully inserted
into the platform cushion.

2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.

3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
Latch
Knob

1.
See drawing 2. Hold the upper end of the treadmill
with your right hand. Pull the latch knob to the left
and hold it. Next, lower the frame until it is past
the latch pin. Make sure that the pin does not hit
against the foot rail. Then, release the latch knob.

Engaged

Latch Pin

2.
See drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.

Platform Cushion
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).

TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.

the demo mode, hold down the Stop button for a
few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 18 to turn off the
demo mode.

SYMPTOM: The power does not turn on

SYMPTOM: The incline of the treadmill does not
change correctly

a. Make sure that the power cord is plugged into a
surge suppressor and that the surge suppressor
is plugged into a properly grounded outlet (see
page 13). Use only a surge suppressor that meets
all of the specifications described on page 13.
IMPORTANT: The treadmill is not compatible
with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.

a. Hold down the Stop button and the Speed increase
button, insert the key into the console, and then
release the Stop button and the Speed increase
button. Press the Stop button and then press the
Incline increase or decrease button. The treadmill will automatically rise to the maximum incline
level and then return to the minimum level. This will
recalibrate the incline system. If the incline does not
begin calibrating, press the Stop button again, and
then press the Incline increase or decrease button
again. When the incline is calibrated, remove the
key from the console.

b. After the power cord has been plugged in, make
sure that the key is inserted into the console.
c. Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.

SYMPTOM: The upper body arms squeak during
use
a. (Note: Correcting this problem requires a small
amount of marine grease, available at hardware
stores.) Turn the resistance knob (A) counterclockwise and remove it. Next, remove the resistance
cone (B) and the upper body arm (C), along with
the resistance plate (D), plastic spacer (E), spring
washer (F), washers (G), and thrust bearing (H).
(Note: If the resistance plate comes out of the
resistance cone, press it back in.) Apply a thin layer
of white marine grease to the outer surface of the
resistance cone. Then, reattach all parts in the
order shown below.

c
Tripped

Reset

SYMPTOM: The power turns off during use
a. Check the power switch (see the drawing above).
If the switch has tripped, wait for five minutes and
then press the switch back in.

b. Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.

C
B

c. Remove the key from the console, and then
reinsert it.

d. If the treadmill still will not run, please see the back
cover of this manual.

SYMPTOM: The console displays remain lit when
you remove the key from the console
a. The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. If the displays remain lit when you remove
the key, the demo mode is turned on. To turn off

E F

SYMPTOM: The walking belt slows when walked on

SYMPTOM: The walking belt is off-center or slips
when walked on

a.
Use only a surge suppressor that meets all of the
specifications described on page 13.

a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.

b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b
2–3 in.

b. If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.

Idler Roller Screws
c. Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate the walking belt and cause excessive wear.
If you suspect that the walking belt needs more
lubricant, see the back cover of this manual.

d. If the walking belt still slows when walked on, see
the back cover of this manual.

EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.

WARNING:

Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.

Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.

These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.

WORKOUT GUIDELINES

EXERCISE INTENSITY

Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.

Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.

Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise; never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY

To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.

SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach down
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times. Stretches: Hamstrings, back of knees and back.

2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.

3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your hands
against a wall. Keep your back leg straight and your back foot flat on
the floor. Bend your front leg, lean forward and move your hips toward
the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg.
To cause further stretching of the achilles tendons, bend your back leg
as well. Stretches: Calves, achilles tendons and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp one
foot with your other hand. Bring your heel as close to your buttocks as
possible. Hold for 15 counts, then relax. Repeat 3 times for each leg.
Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.

PART LIST

Model No. 831.24833.3 R0714A

Key No. Qty.

Description

Key No. Qty.

Description

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

#8 x 1/2" Ground Screw
3/8" x 3 1/4" Screw
3/8" Star Washer
#8 x 3/4" Screw
5/16" x 3/4" Screw
5/16" Star Washer
#8 x 1" Screw
#10 x 1 1/2" Screw
3/8" x 2 1/2" Bolt
#8 x 1/2" Screw
M6 x 50mm Screw
3/8" x 1" Bolt
Hood Clip
#8 x 3/4" Truss Head Screw
3/8" x 1 3/4" Bolt
3/8" Jam Nut
1/4" x 3/8" Screw
#8 x 1/2" Screw
5/16" x 1 1/2" Bolt
5/16" Nut
Upper Handrail Cap
#8 Star Washer
1/4" Star Washer
Drive Roller Washer
1/4" x 1 1/4" Screw
Incline Frame Washer
Left Foot Rail
Platform Cushion
Caution Decal
Belt Guide
Drive Roller/Pulley
#10 Flat Washer
#10 x 3/4" Screw
Right Upper Body Arm
Drive Motor
Controller
Controller Plate
Frame
Walking Platform
Walking Belt
Right Foot Rail
Idler Roller
Left Rear Foot

44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
*

Left Upper Body Arm
Console Clamp
Right Rear Foot
Console Ground Wire
Motor Hood
Incline Motor
Lift Frame Bushing
Lift Frame
Belly Pan
Power Cord Grommet
Power Cord
Power Switch
1/4" x 3 1/2" Screw
Console
Console Base
Left Handrail
Lower Handrail Cap
Console Crossbar
Key/Clip
Upright Wire
Right Handrail
Upper Body Arm Insert
Left Upright
(Not Used)
Latch Pin Assembly
Warning Decal
Base Cap
Thick Base Pad
Thin Base Pad
Upright Grommet
Base
Wheel
Right Upright
Lift Frame Pin
#8 x 3/4" Tek Screw
1/4" Star Washer
3/8" x 1 1/2" Bolt
Wire Tie
Latch Spacer
M6 Nut
Controller Clamp
User’s Manual

9
6
10
19
8
8
4
2
2
12
3
2
3
18
1
6
2
4
4
4
2
2
4
2
2
2
1
2
1
2
1
8
2
1
1
1
1
1
1
1
1
1
1

1
2
1
1
1
1
2
1
1
1
1
1
4
1
1
1
2
1
1
1
1
2
1
–
1
2
4
2
2
1
1
2
1
2
8
2
1
2
1
1
1
–

Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. If a part is missing, call 1-888-533-1333. *These parts are not illustrated.

32
14

20
19

32
14
14

14 18

1
22

EXPLODED DRAWING A
Model No. 831.24833.3 R0714A

EXPLODED DRAWING B

Model No. 831.24833.3 R0714A
13
13

16
16

49
50
51

16
16

4
52
4

4
4

55
4

EXPLODED DRAWING C

Model No. 831.24833.3 R0714A
10

21
4
4

62
10

59
10

57
5

6
5
82

61
44

5
1

6
5
6
5

47
33

70
69
65

71
9

73
74

75
70

72
78

16
16

71
78

3
70

9
78

Get it fixed, at your home or ours!
Your Home

For repair—in your home—of all major brand appliances, lawn and garden equipment,
or heating and cooling systems, no matter who made it, no matter who sold it!
For the replacement parts, accessories, and user’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME® (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca

Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222 Call anytime, day or night (U.S.A. only)
www.sears.com

To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.)

1-800-361-6665 (Canada)

Para pedir servicio de reparación a domicilio, y para ordenar piezas:
1-888-SU-HOGAR® (1-888-784-6427)

® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC

90-DAY FULL WARRANTY
If this Sears Treadmill Exerciser fails due to a defect in material or workmanship within 90 days of the
date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement
if repair proves impossible). The frame and drive motor are warranted for five (5) years from the date of
purchase.
This warranty does not apply when the Treadmill Exerciser is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179

Part No. 339394 R0714A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16
Create Date                     : 2014:10:20 16:37:21-06:00
Metadata Date                   : 2014:10:20 16:37:37-06:00
Modify Date                     : 2014:10:20 16:37:37-06:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:eaafe562-553b-0549-bd9d-df714ee462d4
Original Document ID            : xmp.did:0180117407206811958D9F7BB666E2FA
Document ID                     : xmp.id:3216cf89-517f-4cf9-9f00-4f63b7401deb
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:627d0dbd-48b4-48ca-b9be-1dca12762648
Derived From Document ID        : xmp.did:ACEB731A2B2068118A6DBD56E95E240E
Derived From Original Document ID: xmp.did:0180117407206811958D9F7BB666E2FA
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:10:20 16:37:21-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 28
Creator                         : Adobe InDesign CC (Macintosh)

EXIF Metadata provided by EXIF.tools

Proform 248333 Crosswalk 395 Treadmill Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation