Proform Pfex17931 Gl35 Bike Users Manual

Proform-Pfex17931-Owner-S-Manual proform-pfex17931-owner-s-manual

2015-04-14

: Proform Proform-Pfex17931-Gl35-Bike-Users-Manual-701169 proform-pfex17931-gl35-bike-users-manual-701169 proform pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

Patent Pending

Model No. PFEX17931
Serial No.

USER’S MANUAL

Write the serial number in the
space above for reference.

Serial
Number
Decal

QUESTIONS?
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction through direct assistance
from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:

1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.

Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

PROFORM is a registered trademark of ICON Health & Fitness, Inc.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of serious injury, read the following important precautions before using the exercise cycle.
1. Read all instructions in this manual before
using the exercise cycle.

readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

2. Use the exercise cycle only as described in
this manual.

11. Always keep your back straight when using
the exercise cycle; do not arch your back.

3. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.

12. If you feel pain or dizziness while exercising,
stop immediately and cool down.

4. The exercise cycle is intended for home use
only. Do not use the exercise cycle in
a commercial, rental, or institutional setting.

13. The exercise cycle does not have a freewheel; the pedals will continue to move until
the flywheel stops.

5. Place the exercise cycle indoors on a level
surface. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cycle to protect the floor.

14. The decal shown below has been placed on
the exercise cycle. If the decal is missing, or
if it is not legible, please call toll-free 1-800999-3756 to order a free replacement decal.
Apply the decal in the location shown.

6. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
7. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
8. Wear appropriate clothing when exercising;
do not wear loose clothing that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
9. The exercise cycle should not be used by
persons weighing more than 250 pounds.
10. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate

WARNING:

Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM®
GL36 exercise cycle. Cycling is one of the most effective exercises for increasing cardiovascular fitness,
building endurance, and toning the entire body. The
PROFORM® GL36 exercise cycle offers an impressive
array of features to let you enjoy this healthful exercise in the convenience and privacy of your home.

Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
PFEX17931. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual).

For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Fan
Handgrip Pulse Sensor

Console

Handlebar
Water Bottle Holder*
FRONT
Seat

Adjustment Knob
Adjustment Knob
Adjustment Knob

Pedal/Strap
Wheel

Leveling Foot
REAR

RIGHT SIDE
*No water bottle is included

ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver
.

and Phillips screw-

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in
the parts bag, check to see if it has been pre-attached.

M8 Nylon
Locknut (10)–6

M6 x 25.4mm Button
Screw (33)–1

M10 Black Nylon
Locknut (63)–4

M8 x 14mm Button
Screw (49)–1

M8 Split
Washer (70)–4

M4 x 16mm
Screw (66)–6

M8 x 22mm Button
Screw (74)–4

M10 x 112mm Carriage Bolt (65)–4

M4 x 22mm
Screw (21)–2

M8 x 39mm Button
Bolt (64)–2

1. Identify the Front Stabilizer (2). While another person
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with two M10 x 112mm
Carriage Bolts (65) and two M10 Black Nylon Locknuts
(63). Make sure that the Front Stabilizer is turned
so the Wheels (30) are not touching the floor.

2
1
63
2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (3) to the Frame with two
M10 x 112mm Carriage Bolts (65) and two M10 Black
Nylon Locknuts (63).

63
3
63
1

65
3. While another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (36)
to the Lower Wire Harness (35). Carefully pull the
upper end of the Upper Wire Harness to remove
any slack from the Wire Harnesses; make sure that
the connectors do not catch on the indicated rod.

Turn the indicated Adjustment Knob (28) counterclockwise two or three turns to loosen it. Next, pull the Knob,
insert the Upright (13) into the Frame (1), and then
release the Knob. Be careful to avoid pinching the
Wire Harnesses (35, 36). Move the Upright up and
down slightly until the pin on the Knob snaps into
one of the holes in the Upright. Then, turn the Knob
clockwise until it is tight.
Tighten the M6 x 25.4mm Button Screw (33) into the
Frame (1) and into the slot in the side of the Upright (13).
Attach the Water Bottle Holder (9) to the Upright (13)
with two M4 x 22mm Screws (21).

21
13
Rod
Slot
1
36
35
33

Make sure the
wire harnesses
do not get
pinched and
damaged during
this step.

4. Slide the two Handlebar Collars (7) onto the Left
Handlebar (50). Insert the Right Handlebar (51) into
the Left Handlebar. Connect the Handlebar Collars, the
Left Handlebar, and the Right Handlebar with two M4 x
16mm Screws (66).

4
7
51

Attach the Handlebar Bracket (15) to the Left and
Right Handlebars (50, 51) with four M8 x 22mm Button
Screws (74).

15
49
74
7

Attach the Handlebar Bracket (15) to the Upright (13)
with two M8 x 39mm Button Bolts (64), two M8 Nylon
Locknuts (10), and an M8 x 14mm Button Screw (49).

50
66

64
5. While another person holds the Console (16) in the
position shown, connect the wire harness on the
Console to the Upper Wire Harness (36). Insert the
excess wire harness into the Upright (13).

5
16

Attach the Console (16) to the Upright (13) with four
M4 x 16mm Screws (66). Be careful to avoid pinching the wire harnesses.

36
66
66
Wire
Harness
13

6. The Console (16) requires four “D” batteries (not
included); alkaline batteries are recommended.
Remove the indicated screw from the battery drawer,
and pull the battery drawer open. Insert four batteries
into the battery drawer; make sure that the batteries
are oriented as shown by the markings inside the
battery drawer. Close the battery drawer and reattach
the screw. Note: When the batteries are installed correctly, the fan will turn on for a moment.

6
16
Batteries

Battery
Drawer

Screw
7. Turn the indicated Adjustment Knob (28) counterclockwise two or three turns to loosen it. Next, pull the Knob,
insert the Seat Post (5) into the Frame (1), and then
release the Knob. Move the Seat Post up and down
slightly until the pin on the Knob snaps into one of
the holes in the Seat Post. Then, turn the Knob clockwise until it is tight.

1
28

8. Attach the Seat (12) to the Seat Bracket (6) with four
M8 Nylon Locknuts (10) and four M8 Split Washers
(70). Note: The Nylon Locknuts and the Split Washers
may be pre-attached to the underside of the Seat.

Turn the indicated Adjustment Knob (28) counterclockwise two or three turns to loosen it. Next, pull the Knob,
slide the Seat Bracket (6) into the top of the Seat Post
(5), and then release the Knob. Move the Seat
Bracket forward and backward slightly until the pin
on the Knob snaps into one of the holes in the Seat
Bracket. Then, turn the Knob clockwise until it is tight.

6
70

10
70
9. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank Arm
(42). Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm. Important: Tighten both
Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For
best performance, the Pedals must be kept tightened.
Adjust the Left Pedal Strap (25) to the desired position,
and press the end of the Pedal Strap onto the tab on
the Left Pedal (24). Adjust the Right Pedal Strap (not
shown) in the same way.

25
42
Tab

10.Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.

HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT POST

HOW TO ADJUST THE UPRIGHT

For effective exercise, the seat
should be at the
Seat
proper height. As
you pedal, there
should be a slight
Knob
Seat
bend in your knees
Post
when the pedals
are in the lowest
position. To adjust
the height of the
seat, first turn the
indicated knob counterclockwise two or three turns to
loosen it (if the knob is not loosened enough, it may
scratch the seat post). Next, pull the knob, slide the
seat post to the desired height, and then release the
knob. Move the seat post up and down slightly until
the pin on the knob snaps into one of the holes in
the seat post. Then, turn the knob clockwise until it is
tight.

The upright can be
adjusted to the
height that is the
most comfortable for
Upright
you. To adjust the
upright, first turn the
indicated knob
counterclockwise
two or three turns to
loosen it (if the knob
Knob
is not loosened
enough, it may
scratch the upright).
Next, pull the knob,
slide the upright to
the desired height,
and then release
the knob. Move the upright up and down slightly
until the pin on the knob snaps into one of the
holes in the upright. Then, turn the knob clockwise
until it is tight.

HOW TO ADJUST THE SEAT
HOW TO ADJUST THE PEDAL STRAPS
The seat can be
adjusted to the
position that is the
most comfortable
Seat
for you. Before
adjusting the seat,
Knob
Seat
dismount the
Bracket
exercise cycle; do
not adjust the
seat while you are
sitting on it. To
adjust the seat, first
turn the indicated knob counterclockwise two or three
turns to loosen it (if the knob is not loosened enough, it
may scratch the seat bracket). Next, pull the knob,
slide the seat to the desired position, and then release
the knob. Move the seat bracket forward and backward slightly until the pin on the knob snaps into
one of the holes in the seat bracket. Then, turn the
knob clockwise until it is tight.

To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired position,
and press the ends
of the straps back
onto the tabs.

Pedal
Strap

Tab

Fan Button

Display Buttons
On/Reset Button
Resistance Buttons

FEATURES OF THE CONSOLE
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you pedal, the console
will provide continuous exercise feedback. You can
even measure your heart rate using the built-in handgrip pulse sensor.
The console also offers four Smart programs. Each program automatically changes the resistance of the pedals and prompts you to increase or decrease your pace
as it guides you through an effective workout.
In addition, the console features two Heart Rate programs that change the resistance of the pedals and
prompt you to vary your pace to keep your heart rate
near a target heart rate as you exercise.
The console also features iFIT.com interactive technology. Having iFIT.com technology is like having a per-

sonal trainer in your home. Using a stereo audio cable
(available at electronics stores), you can connect the
exercise cycle to your home stereo, portable stereo,
computer, or VCR and play special iFIT.com CD and
video programs (iFIT.com CDs and videocassettes are
available separately). iFIT.com CD and video programs
automatically control the resistance of the pedals and
prompt you to vary your pace as a personal trainer
coaches you through every step of your workout. Highenergy music provides added motivation. To purchase
iFIT.com CDs and videocassettes, call toll-free 1800-735-0768.
With the exercise cycle connected to your computer,
you can also go to our Web site at www.iFIT.com and
access programs directly from the internet. Explore
www.iFIT.com for more information.
To use the manual mode of the console, see page
11. To use a Smart program, see page 13. To use a
Heart Rate program, see page 14. To use an
iFIT.com CD or videocassette, see page 18. To use
a program directly from our Web site, see page 19.

seconds. If you use the handgrip pulse sensor,
the display will also show your heart rate (see
step 5 on page 12).

HOW TO USE THE MANUAL MODE

Turn on the console.

To view only the distance
Upper Button
you have pedaled or the
number of calories or fat
calories you have burned,
press the upper button on
the left side of the large
display until only the word
DISTANCE, CALORIES, or
FAT CALORIES appears in the upper section of
the large display. Make sure that the word SCAN
does not appear. To again view the distance you
have pedaled and the numbers of calories and
fat calories you have burned, press the upper
button until the word SCAN reappears.

Note: The console requires four 1.5V “D” batteries
(see assembly step 6 on page 7).
To turn on the console, press the On/Reset button
or begin pedaling. (See the drawing on page 10 to
identify the On/Reset button.)

Select the manual mode.
Each time the console is
turned on, the manual
mode will be selected. If a
program has been selected, select the manual
mode by pressing the
Program button repeatedly until the letters RPM
appear in the small display.

The center of
the large display
will show the
elapsed time and
your current pace
(pace is shown in
minutes per mile). The display will change from
one number to the other every few seconds.
Note: When a program is selected (except for the
SelfSelect program), the display will show the
time remaining in the program instead of the
elapsed time.

Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the pedals by pressing the + and – buttons below the
large display. There are ten resistance levels—
level 10 is the most challenging. Note: After the
buttons are pressed, it will take a few seconds for
the resistance to reach the selected setting.

To view only the elapsed time or your pace, press
the center button on the left side of the large display until only the word TIME or PACE appears.
Make sure that the word SCAN does not appear.
To view both the elapsed time and your pace,
press the center button until the word SCAN
reappears.

Follow your progress with small display and
the large display.
The small display will
show your pedaling pace,
in revolutions per minute
(RPM). The indicator bar
in the small display will
increase or decrease in
length as you increase or
decrease your pedaling
pace.

The lower section of the large
display will show
your pedaling
speed and the
resistance level.
The display will change from one number to the
other every few seconds.

Indicator Bar

The upper section of the
large display
will show the
distance you
have pedaled
and the numbers of calories and fat calories you
have burned (see FAT BURNING on page 21 for
an explanation of fat calories). The display will
change from one number to the next every few

To view only your pedaling speed or the resistance level, press the lower button on the left
side of the large display until only the word
SPEED or RESISTANCE appears. Make sure
that the word SCAN does not appear. To view
both your pedaling speed and the resistance
level, press the lower button until the word SCAN
reappears.

For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds. Note:
When you first hold the handgrips, the large display will show your heart rate continuously for 30
seconds. The display will then show your heart
rate along with other feedback modes.

To reset the displays, press the On/Reset button.
Note: The console can show
speed and distance in either
miles or kilometers. The letters MPH or KM/H will appear in the lower section
of the large display to show which system of measurement is selected. To change the system of
measurement, hold down the On/Reset button for
about six seconds. Note: When the button is held
down, the fan will turn on for a moment. When the
batteries are replaced, it may be necessary to reselect the desired system of measurement.

Turn on the fan if desired.
To turn on the
fan at low speed,
press the fan
button. To turn
Thumb
on the fan at
Wheel
high speed,
Fan
press the fan
Button
button a second
time. To turn off
the fan, press the fan button a third time. Note: If
the fan is turned on but the pedals are not moved
for thirty seconds, the fan will automatically turn
off to conserve the batteries.

Measure your heart rate if desired.
If there are
thin sheets of
Metal
plastic on the
Contacts
metal contacts
on the handgrips, peel off
the plastic. To
use the handgrip pulse sensor, hold the handgrips with your palms resting
against the metal contacts. Avoid moving your
hands. When your pulse is detected, the heartshaped indicator in the large display will flash
each time your heart beats. After a moment, two
dashes (– –) will appear and then your heart rate
will be shown.

Rotate the thumb wheel on the right side of the
console to pivot the fan to the desired angle.

When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display.
If the pedals are not moved and the console buttons are not pressed for a few minutes, the console will turn off to conserve the batteries.

The target pace
for the current
Indicator
period will be
Bar
shown by the
arrows in the
Arrows
small display. To
pedal at the target
pace, simply
increase or decrease your pace until there is one
arrow pointing to each segment of the indicator
bar (see the drawing above). At the end of each
period, the number of arrows will change if a different target pace is programmed for the next
period. When the number of arrows changes,
change your pace until there is one arrow pointing to each segment of the indicator bar.
Important: The target pace is intended only to
provide a goal. Your actual pace may be slower than the target pace, especially during the
first few months of your exercise program.
Make sure to pedal at a pace that is comfortable for you.

HOW TO USE A SMART PROGRAM
Each Smart program will automatically change the
resistance of the pedals and prompt you to increase or
decrease your pace as it guides you through an effective workout. Programs 3 and 4 are weight loss programs, program 5 is an aerobic program, and program
6 is a high-performance interval-training program.
Follow the steps below to use a Smart program.

Turn on the console.
See step 1 on page 11.

Select one of the Smart programs.
Each time the console is
turned on, the manual
mode will be selected. To
select a Smart program,
press the Program button
repeatedly until the number 3, 4, 5, or 6 appears in
the small display.

During the program, the center of the large display will show the time remaining in the program.
If you stop pedaling for a few seconds, the displays will pause and the time will flash. If you
continue pedaling after the program is completed,
the displays will continue to show exercise feedback.

Begin pedaling to start the program.
To start the program, simply begin pedaling. Each
Smart program consists of 20 or 30 one-minute
periods. One resistance level and one target pace
are programmed for each period. (The same
resistance level and/or target pace may be programmed for two or more consecutive periods.)

See step 4 on page 11.

At the end of each period of the program, the
resistance of the pedals will automatically change
if a different resistance level is programmed for
the next period. Note: If the resistance level is too
high or too low, you can change it by pressing the
+ and – buttons below the large display. However,
when the current period is completed, the resistance of the pedals will automatically change if a
different resistance level is programmed for the
next period.

Follow your progress with the large display.

Measure your heart rate if desired.
See step 5 on page 12.

Turn on the fan if desired.
See step 6 on page 12.

When you are finished exercising, the console
will automatically turn off.
See step 7 on page 12.

to operate properly. Each time you hold the
handgrips, keep your hands on the metal contacts for at least 30 seconds. Note: When you
are not holding the handgrips, the letters PLS will
appear in the large display instead of your heart
rate.

HOW TO USE A HEART RATE PROGRAM
Heart Rate program 1 is designed to keep your heart
rate between 65% and 85% of your maximum heart
rate during your workout. (Your maximum heart rate is
estimated by subtracting your age from 220. For
example, if you are 25 years old, your maximum heart
rate is 195 beats per minute.) Heart Rate program 2 is
designed to keep your heart rate near a target heart
rate that you select.

To start the program, simply begin pedaling.
Program 1 consists of 20 one-minute periods.
One resistance level and one target heart rate are
programmed for each period. (The same resistance level and/or target heart rate may be programmed for two or more consecutive periods.)
Program 2 is sixty minutes long (you may choose
to use only part of the program). The same resistance level and target heart rate are programmed
for the entire program.

Follow the steps below to use a Heart Rate program.

Turn on the console.
See step 1 on page 11.

Select one of the Heart Rate programs.

If program 1 is selected, the resistance of the
pedals will periodically change. (Note: If the resistance level is too high or too low, you can change
it by pressing the + and – buttons below the large
display. However, when the current period is completed, the resistance of the pedals may automatically change.) If program 2 is selected, the
resistance of the pedals will not change. Note:
You can change the resistance level for the entire
program by pressing the + and – buttons below
the large display if desired.

Each time the console is
turned on, the manual
mode will be selected. To
select a Heart Rate program, press the Program
button repeatedly until the
number 1 or 2 appears in
the small display.

Enter your age or a target heart rate.
If program 1 is selected, the word AGE will
appear in the large display and the current age
setting will flash. If you have already entered your
age, press the Enter button. If you have not
entered your age, press the small + and – buttons
to enter your age. Then, press the Enter button.
Once you have entered your age, it will be saved
in memory until the batteries are replaced.
If program 2 is selected, the letters PLS (pulse)
will appear in the large display and the current
target heart rate will flash. If you do not wish to
change the target heart rate, press the Enter button. If you wish to change the target heart rate,
press the small + and – buttons. Then, press the
Enter button. The target heart rate can be from 70
to 170 beats per minute.

Begin pedaling to start the program.

Hold the handgrip pulse sensor.
It is not necessary to hold the handgrips continuously during a Heart Rate program; however, you
must hold the handgrips frequently for the program

During programs
1 and 2, the
Indicator
arrows in the
Bar
small display will
help you to keep
Arrows
your heart rate
near the current
target heart rate.
When you hold the handgrip pulse sensor, the
console will compare your heart rate to the current target heart rate. If your heart rate is too far
above or below the target heart rate, the number
of arrows in the small display will change to
prompt you to increase or decrease your pace.
When the number of arrows changes, change
your pace until there is one arrow pointing to
each segment of the indicator bar. Important:
The target pace is intended only to provide a
goal. Your actual pace may be slower than the
target pace, especially during the first few
months of your exercise program. Make sure
to pedal at a pace that is comfortable for you.

Note: If you stop pedaling for a few seconds, the
program will end. To use the program again, reselect it and start it at the beginning.

Follow your progress with the large display.
See step 4 on page 11.

Turn on the fan if desired.
See step 6 on page 12.

When you are finished exercising, the console
will automatically turn off.

HOW TO CONNECT YOUR CD PLAYER, VCR,
OR COMPUTER
To use iFIT.com CDs, the exercise cycle must be connected to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 15 to 17
for connecting instructions. To use iFIT.com videocassettes, the exercise cycle must be connected to your
VCR. See page 17 for connecting instructions. To use
iFIT.com programs directly from our Web site, the
exercise cycle must be connected to your computer. See
page 17 for connecting instructions.
HOW TO CONNECT YOUR PORTABLE CD PLAYER

See step 7 on page 12.
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones into the PHONES jack.
A
PHONES LINE OUT

LINE OUT

PHONES

Headphones

Audio
Cable

B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the Y-adapter.
B
PHONES

PHONES

Audio
Cable

1/8”
Y-adapter

Headphones

HOW TO CONNECT YOUR PORTABLE STEREO

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
1/8” LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo.

A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your stereo.

A
CD

A/B

VCR
AUDIO OUT

LINE OUT

Amp

LINE OUT

RIGHT
LEFT

LINE OUT

Audio Cable
Audio Cable
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack beneath
the console. Plug the other end of the cable into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the wire
into the unused side of the Y-adapter. Plug the Yadapter into the LINE OUT jack on your stereo.

B. Refer to the drawing above. Plug one end of a 1/8”
to 1/8” stereo audio cable (available at electronics
stores) into the jack beneath the console. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
L
C. Plug one end of a 1/8” to 1/8” stereo audio
cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the Y-adapter.

CD
VCR
Amp

LINE OUT

Audio
Cable

PHONES

1/8”
Audio Y-adapter
Cable

RCA
Y-adapter

Wire removed from
LINE OUT jack

Headphones

HOW TO CONNECT YOUR COMPUTER

HOW TO CONNECT YOUR VCR

Note: If your computer has a 1/8” LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.

Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.

A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.

A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your VCR.

A
LINE OUT

A
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT

Audio
Cable

AUDIO OUT
RIGHT
LEFT

B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your computer. Plug your headphones or speakers into the other side of the Y-adapter.

Audio Cable
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Yadapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.

PHONES

Audio Cable

1/8”
Y-adapter

ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT

Headphones/Speakers

RCA
Y-adapter

Audio
Cable

Wire removed from
AUDIO OUT jack

The program will function in almost the same way
as a Smart program (see step 3 on page 13).
However, an electronic “chirping” sound will alert
you when the resistance level and/or the target
pace is about to change.

HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS

To use iFIT.com CDs or videocassettes, the exercise
cycle must be connected to your portable CD player,
portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT YOUR CD
PLAYER, VCR, OR COMPUTER on page 15. To
purchase iFIT.com CDs and videocassettes, call
toll-free 1-800-735-0768.

Note: If the resistance of the pedals and/or the
target pace does not change when a “chirp” is
heard:
• Make sure that the indicator near the iFIT.com
button is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the console may not detect the program signals.

Follow the steps below to use an iFIT.com CD or
video program.

Turn on the console.

• Make sure that the audio cable is properly
connected and that it is fully plugged in.

See step 1 on page 11.

Select the iFIT.com mode.

See step 4 on page 11.

Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the button will light and the letters
IF will appear in the small
display.

Measure your heart rate if desired.
See step 5 on page 12.

Turn on the fan if desired.
See step 6 on page 12.

Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.

Follow your progress with the large display.

When you are finished exercising, the console
will automatically turn off.
See step 7 on page 12.

Press the play button on your CD player or
VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.

HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the exercise cycle must
be connected to your computer. See HOW TO CONNECT YOUR COMPUTER on page 17. In addition,
you must have an internet connection and an internet
service provider. A list of specific system requirements
will be found on our Web site.

Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.

Follow the desired links on our Web site to
select a program.

Follow the on-line instructions to start the
program.
When you start the program, an on-screen countdown will begin.

Follow the steps below to use a program from our
Web site.

When the on-screen countdown ends, the program will begin. The program will function in
almost the same way as a Smart program (see
step 3 on page 13). However, an electronic “chirping” sound will alert you when the resistance level
and/or the target pace is about to change.

Turn on the console.
See step 1 on page 11.

Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the button will light and the letters
IF will appear in the small
display.

Return to the exercise cycle and begin
pedaling.

Follow your progress with the large display.
See step 4 on page 11.

Measure your heart rate if desired.
See step 5 on page 12.

you are finished exercising, the console
10 When
will automatically turn off.

Go to your computer and start an internet connection.

See step 7 on page 12.

MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle regularly. Replace any worn parts immediately.

• For the most accurate heart rate reading, hold the
metal contacts for about 30 seconds.

To clean the exercise cycle, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.

• For optimal performance of the handgrip pulse sensor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth; never use alcohol,
abrasives, or chemicals.
HOW TO MOVE THE EXERCISE CYCLE

BATTERY REPLACEMENT
To move the exercise cycle, stand in front of the exercise cycle, hold the handlebars, and place one foot on
the front stabilizer. Pull the handlebars until the exercise cycle can be moved on the front wheels.
Carefully move the exercise cycle to the desired location and then lower it.

If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. Refer to assembly step 6 on
page 7 for replacement instructions.
HOW TO LEVEL THE EXERCISE CYCLE
After the exercise cycle has
been moved to
the location
where it will be
used, make sure
that both ends of
Leveling
front stabilizer
Foot
are touching the
floor. If the exercise cycle rocks
slightly during use, turn one or both of the leveling
feet under the front stabilizer until the rocking motion
is eliminated.

Handlebars

Place
Foot
Here

HANDGRIP PULSE SENSOR TROUBLESHOOTING

Wheel

• Avoid moving your hands while using the handgrip
pulse sensor. Excessive movement may interfere
with heart rate readings.
• Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.

CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.

During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest number in your training zone as you exercise. For maximum fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.

WARNING:

Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.

Aerobic Exercise

The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.

If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.

EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.

WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training
zone. Note: During the first few weeks of your exercise program, do not keep your heart rate in your
training zone for longer than 20 minutes.
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.

To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning; the middle number is the recommended
heart rate for maximum fat burning; the highest number is the recommended heart rate for aerobic exercise.

EXERCISE FREQUENCY
To maintain or improve your condition, plan three workouts each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember, the key to success is make exercise a regular and enjoyable part of your everyday life.

Fat Burning
To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time.

PART LIST—Model No. PFEX17931
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

1
1
1
2
1
1
2
2
1
8
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
3
2
2
1
1
1
1
1
1
1
1

Description

R0603A

Key No. Qty.

Frame
Front Stabilizer
Rear Stabilizer
Rear Endcap
Seat Post
Seat Bracket
Handlebar Collar
Foam Grip
Water Bottle Holder
M8 Nylon Locknut
M6 x 38mm Screw
Seat
Upright
Upright Bushing
Handlebar Bracket
Console
Left Side Shield
Right Side Shield
Side Shield Cover
Seat Upright Bushing
M4 x 22mm Screw
Reed Switch Clamp
M4 x 5mm Screw
Left Pedal
Left Pedal Strap
Right Pedal
Right Pedal Strap
Adjustment Knob
M6 x 72mm Button Screw
Wheel
Left Front Endcap
Right Front Endcap
M6 x 25.4mm Button Screw
Adjustment Motor
Lower Wire Harness
Upper Wire Harness
Flywheel
Magnet

39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
#
#

1
2
1
1
1
1
2
1
1
1
1
1
1
7
1
1
1
2
1
2
1
2
2
1
5
2
4
16
2
1
1
4
2
1
4
4
1
2

Description
Flywheel Axle
Flywheel Bearing
“C” Magnet
Left Crank Arm
Reed Switch/Wire
Crank Bearing Assembly
M5 Nut
Adjustment Cable
Return Spring
Idler Arm
M8 x 14mm Button Screw
Left Handlebar
Right Handlebar
M4 x 25mm Screw
“J” Bolt
Pulley
M10 x 25mm Flat Bolt
Flange Screw
Right Crank Arm
M6 x 8mm Screw
M8 x 47mm Button Bolt
M6 Nut
M8 Nylon Jam Nut
Flywheel Washer
M10 Black Nylon Locknut
M8 x 39mm Button Bolt
M10 x 112mm Carriage Bolt
M4 x 16mm Screw
Leveling Foot
Flywheel Spacer
M8 Flange Nut
M8 Split Washer
M4 x 12mm Round Head Screw
Belt
Motor Washer
M8 x 22mm Button Screw
User’s Manual
Allen Wrench

Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.

EXPLODED DRAWING—Model No. PFEX17931

R0603A

52
52
7

66
74
10 15

10 49

66
74
64

17
21

13
16

12
28
6

8
70
70

5
10

10
30

30
29

65
58

57
54

67
33

58 66

55
66 44

23
31

63
36
56

69
59
46 45

11
60

40
68

63
1

39
61

24
71

37
40

48
53

HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
• The MODEL NUMBER of the product (PFEX17931)
• The NAME of the product (PROFORM® GL36 exercise cycle)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22)

PROFORM is a registered trademark of ICON Health & Fitness, Inc.

LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

Part No. 205489 R0903A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 24
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:93ab335a-d211-4050-8dd2-2fd7f20274ba
Producer                        : QuarkXPress(tm) 6.5
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE 485 C).%%+ (PANTONE 151 C).%%CMYKCustomColor: 0 .95 1 0 (PANTONE 485 C).%%+ 0 .48 .95 0 (PANTONE 151 C).%%EndComments
Create Date                     : 2006:09:27 17:14:15Z
Creator Tool                    : QuarkXPress(tm) 6.5
Modify Date                     : 2006:09:29 08:56:03-06:00
Metadata Date                   : 2006:09:29 08:56:03-06:00
Document ID                     : uuid:0a82eaa3-a4c7-4c49-8710-a490ae5abb1d
Format                          : application/pdf
Creator                         : QuarkXPress(tm) 6.5

EXIF Metadata provided by EXIF.tools

Proform Pfex17931 Gl35 Bike Users Manual

Proform-Pfex17931-Owner-S-Manual proform-pfex17931-owner-s-manual

Navigation menu

Versions of this User Manual:

Views

Navigation