Psion 7527SBTRA2041M Workabout Pro G2 User Manual 7535 G2 Hand Held Computer

Psion Inc Workabout Pro G2 7535 G2 Hand Held Computer

User Manual Part 3

WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 163Chapter 5: ConfigurationDecoded (HHP)Plessey Minimum And Plessey Maximum LengthThese parameters apply to Plessey bar codes.The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 4 to 48.Field Size/CharRefer to page 143 for details.5.10.3.14 Code 11EnabledSet this parameter to on to enable “Code 11”.Check DigitsDouble-tapping on this parameter displays a dialog box in which you can choose One Check Digit or Two check digits. If this parameter is set to One Check Digit, it is assumed that the last digit is a check digit. If it is set to Two Check Digits, it is assumed that the last two digits are check digits.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.Field Size/CharRefer to page 143 for details.5.10.3.15 Interleaved 2 of 5EnabledSet this parameter to on to enable “Interleaved 2 of 5”.
Chapter 5: ConfigurationDecoded (HHP)164 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualCheck DigitWhen this parameter is set to Validate only, the integrity of a symbol is checked to ensure that it complies with specified algorithms.If “Check Digit” is set to Validate and Transmit, the check digit is validated and transmitted with the data.Setting this parameter to None disables this function.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.Field Size/CharRefer to page 143 for details.5.10.3.16 Matrix 2 of 5EnabledSet this parameter to on to enable “Matrix 2 of 5”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.Field Size/CharRefer to page 143 for details.5.10.3.17 IATA 2 of 5EnabledSet this parameter to on to enable “IATA 2 of 5”.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 165Chapter 5: ConfigurationDecoded (HHP)Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 48.Field Size/CharRefer to page 143 for details.5.10.3.18 Discrete 2 of 5EnabledSet this parameter to on to enable “Discrete 2 of 5”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 48.Field Size/CharRefer to page 143 for details.5.10.3.19 TelepenEnabledSet this parameter to on to enable “Telepen”.OutputIf you choose AIM Output, the imager reads symbols with start/stop pattern 1 and decodes them as standard full ASCII (start/stop pattern 1). If you choose Original Output, the imager reads symbols with start/stop pattern 1 and decodes them as compressed numeric with optional full ASCII (start/stop pattern 2).
Chapter 5: ConfigurationDecoded (HHP)166 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualMinimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 60.Field Size/CharRefer to page 143 for details.5.10.3.20 RSS Code (Reduced Space Symbology)EnableSetting this parameter to on enables “RSS Code” scanning capability.Enable RSS Limited‘RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read omni-directionally.Enable RSS Expanded“RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but they can be split into sections and stacked several rows high, reducing the length of the symbol, while increasing the capacity of data that can be stored. “RSS Expanded” code can be omni-directionally scanned.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 74.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 167Chapter 5: ConfigurationDecoded (HHP)5.10.3.21 PosiCode (Reduced Space Symbology)EnableSetting this parameter to on enables “PosiCode” scanning capability.PosiCode“PosiCode” is a “position” based symbology. A position based symbology de-couples the widths of the bars from their positions. The centers of the bars are specified to be laid out on a grid of equally spaced parallel lines. The distance between these grid lines is called the G-dimension and is analogous to the X-dimension of conventional bar codes.There are two variations of this code: PosiCode A, and PosiCode B. The options available with this parameter allow to choose A and B, A and B and Limited A or A and B and Limited B. Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 80.Field Size/CharRefer to page 143 for details.5.10.3.22 CompositeImportant: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled. A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners. The options available for this parameter represent multi-level components of a composite symbol.GS1 128“GS1 128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128.
Chapter 5: ConfigurationDecoded (HHP)168 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual“GS1-128” uses a series of Application Identifiers to include additional data such as best before dates, batch numbers, quantities, weights and many other attributes needed by the user.EAN/UCC 128 EmulationThe options in this parameter allow you to turn this emulation on or off, or to enable RSS Emulation.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 2435.5.10.3.23 TLC-39This composite component integrates MicroPDF417 with the linear code. EnabledSetting this parameter to on enables this parameter.Field Size/CharRefer to page 143 for details.5.10.3.24 PDF-417EnabledSet this parameter to on to enable “PDF-417”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 2750.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 169Chapter 5: ConfigurationDecoded (HHP)5.10.3.25 Micro PDF-417EnabledSet this parameter to on to enable “Micro PDF-417”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 366.Field Size/CharRefer to page 143 for details.5.10.3.26 Code 16KThe “Code 16K” bar code is a multiple-row bar code that can encode the full ASCII character set below ASCII 128. It uses existing UPC and Code 128 character set patterns. Up to 77 full ASCII characters or 154 numeric characters can be encoded into 2 to 16 rows. Each row is divided by a separator bar. The top and bottom of the symbol also have separator bars that extend to the ends of the minimum quiet zones.EnabledSet this parameter to on to enable “Code 16K”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 160.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationDecoded (HHP)170 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.3.27 Code 49The “Code 49” bar code is a multiple-row bar code that can encode the full ASCII character set below ASCII 128. Up to 49 alphanumeric characters or 81 numeric characters can be encoded into two to eight rows. Each row is divided by a separator bar. The top and bottom of the symbol also have separator bars that extend to the ends of the minimum quiet zones.EnabledSet this parameter to on to enable “Code 49”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 81.Field Size/CharRefer to page 143 for details.5.10.3.28 CodablockEnableSet this parameter to on to enable “Codablock”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 2048.Field Size/CharRefer to page 143 for details.5.10.3.29 2D Data MatrixEnableSet this parameter to on to enable “2D Data Matrix”.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 171Chapter 5: ConfigurationDecoded (HHP)Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 1500.Field Size/CharRefer to page 143 for details.5.10.3.30 2D QR CodeEnabledSet this parameter to on to enable “2D QR Code”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 3500.Field Size/CharRefer to page 143 for details.5.10.3.31 2D MaxicodeEnabledSet this parameter to on to enable “2D Maxicode”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 150.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationDecoded (HHP)172 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.3.32 2D AztecEnabledSet this parameter to on to enable “2D Aztec”.Aztec RunesAztec Runes, the smallest type of Aztec Code symbol, has the ability to encode a very short license plate message.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 3750.Field Size/CharRefer to page 143 for details.5.10.3.33 Postal: PlaNETEnabledSet this parameter to on to enable “Postal: PlaNET”.Check DigitIf enabled, the check digit will be transmitted at the end of the scanned data.Field Size/CharRefer to page 143 for details.5.10.3.34 Postal: PostNETEnabledSet this parameter to on to enable “Postal: PostNET”.Check DigitIf enabled, the check digit will be transmitted at the end of the scanned data.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 173Chapter 5: ConfigurationDecoded (HHP)Field Size/CharRefer to page 143 for details.5.10.3.35 Postal: AustralianEnabledSet this parameter to on to enable “Postal: Australian”.Field Size/CharRefer to page 143 for details.5.10.3.36 Postal: CanadianEnabledSet this parameter to on to enable “Postal: Canadian”.Field Size/CharRefer to page 143 for details.5.10.3.37 Postal: ChinaEnabledSet this parameter to on to enable “Postal: China”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 2 to 80.Field Size/CharRefer to page 143 for details.5.10.3.38 Postal: JapaneseEnabledSet this parameter to on to enable “Postal: Japanese”.
Chapter 5: ConfigurationDecoded (HHP)174 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualField Size/CharRefer to page 143 for details.5.10.3.39 Postal: KixEnabledSet this parameter to on to enable “Postal: Kix”.Field Size/CharRefer to page 143 for details.5.10.3.40 Postal: KoreanEnabledSet this parameter to on to enable “Postal: Korean”.Minimum And Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 2 to 48.Field Size/CharRefer to page 143 for details.5.10.3.41 Postal: RoyalEnabledSet this parameter to on to enable “Postal: Royal”.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 175Chapter 5: ConfigurationDecoded (Intermec ISCP)5.10.4 Decoded (Intermec ISCP)• Tap on the Scanner drop-down menu, and choose Decoded (Intermec ISCP).5.10.4.1 Decoded (Intermec ISCP) OptionsLaser On TimeThe value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed.Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10 seconds.5.10.4.2 Decoded (Intermec ISCP) Advanced OptionsContinuous Scan ModeSetting this parameter to ‘on’ keeps the laser on and continuously decoding as long as the scanner button is pressed and held down.Minimum Cancel TimeThe value assigned to this parameter determines the time delay before the scanner is turned off, once the scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current decode before the scan is cancelled when the user quickly triggers on/off.
Chapter 5: ConfigurationDecoded (Intermec ISCP)176 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualLow Power TimeoutTo extend laser life, you can select the length of time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned – a successful decode restores normal blinking.When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min or 3 min.Note: This parameter is only used if the Trigger Mode has been set to Continu-ous On and the hand-held is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is not used.Parameter ScanningSetting this parameter to Enabled allows decoding of parameter bar codes.Same Read ValidateThe data is only transmitted after repeated reads give the same result. The value assigned at this parameter determines the number of reads required, from 0 to 10 times. Same Read TimeoutPrevents the same bar code from being read more than once. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec. Diff Read TimeoutPrevents unwanted reading of other bar codes on the same label. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec. 5.10.4.3 Code 39EnableSetting this parameter to on enables “Code 39”.Full ASCIIIf this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 177Chapter 5: ConfigurationDecoded (Intermec ISCP)Reading RangeDetermines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Start/Stop TransmitSetting this parameter to on enables the transmission of start and stop characters, which are usually not transmitted. Code 39 can start and end with either a * or a $ character (see also next parameter Accepted Start Char).Accepted Start CharThis parameter allows the user the option of using one of the two start/stop characters or both ($ char, * char, $ and * char). Check Digit VerificationUses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or Italian CIP. Notes: French CIP (French pharmaceutical) is only used with bar codes contain-ing 7 characters.Italian CIP (Italian pharmaceutical) is also known as Code 32. It is trans-mitted as a standard Code 39 if checksum is not validated.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationDecoded (Intermec ISCP)178 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.4.4 Code 128EnableSetting this parameter to on enables “Code 128”.GS1-128“GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128.GS1-128 Identifier“GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed. By default, this identifier is transmitted if EAN 128 is enabled.GTIN CompliantGTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes. FNC1 Conversion“FNC1 Conversion” allows the FNC1 character to be converted to another character for applications that cannot use the default <GS> Group Separator or hex (1d). Double-tapping on this option displays a dialog box listing the allowable range – 0 to 255. Enable ISBT 128 To successfully scan this type of bar code (International Society of Blood Transfusion), this option must be set to on. If you enable this type of bar code, Code 128/EAN 128 is deactivated to avoid any confusion.ISBT Concat TransmitThe codes are not concatenated by default. You need to choose one of the options provided for this parameter to send concatenated code. Choosing Only Concatenated Codes transmits only concatenated codes—single codes will not be transmitted. Choosing Concatenated or Single transmits single codes or
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 179Chapter 5: ConfigurationDecoded (Intermec ISCP)concatenated codes. If only one code of a pair is read, that code will be transmitted as a single code. If both codes in a pair are detected, they will be concatenated provided that ISBT Concat Any Pair (see below) is enabled.ISBT Concat Any PairEnabling this parameter causes all code pairs that can be, to be concatenated even if they do not comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Specification for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1).Reading RangeDetermines the reading distance from which a bar code can be successfully scanned. The default setting Extended, allows for increased reading distance. Check Digit VerificationThe available options for this parameter are Disabled or French CIP. This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Note: French CIP (French pharmaceutical) is only used with bar codes contain-ing 7 characters.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.5.10.4.5 EAN 13 SettingsEnabledSet this parameter to on to enable “EAN 13”.
Chapter 5: ConfigurationDecoded (Intermec ISCP)180 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualISBN ConversionWhen this parameter (International Standard Book Number) is enabled, the first 3 characters (‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.4.6 EAN 8EnabledSet this parameter to on to enable “EAN 8”.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Convert To EAN 13If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.4.7 UPC A SettingsEnabledSet this parameter to on to enable “UPC A” bar code scanning recognition.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Transmit Number SystemIf this parameter is enabled, the number system digit is transmitted with the decoded bar code data.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 181Chapter 5: ConfigurationDecoded (Intermec ISCP)Convert To EAN 13If this parameter is enabled, a UPC A bar code is converted to EAN 13.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.4.8 UPC E SettingsEnabledSet this parameter to on to enable “UPC E”.Enable UPC-E1Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Transmit Number SystemIf this parameter is enabled, the number system digit is transmitted with the decoded bar code data.Convert To UPC-AThis parameter converts UPC E (zero suppressed) decoded data to UPC A format before transmission. After conversion, data follows UPC A format and is affected by UPC A programming selections (e.g. Check Digit).Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.4.9 UPC/EAN Shared SettingsThe setting assigned to the “Addendum” parameter associated with this option is shared across all UPC and EAN bar codes.AddendumAn addendum is a separate bar code, supplementary to the main bar code. This parameter provides two options: Not Required but Transmitted if Read or Required and Transmitted.
Chapter 5: ConfigurationDecoded (Intermec ISCP)182 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual• Double-tap on Addendum to display a dialog box listing your options.• Highlight an item, and tap on OK.When “Addendum” is set to Not Required but Transmitted if Read, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required and Transmitted, the scanner does not accept the main bar code without an addendum.Addendum Add-on 2 And Addendum Add-on 5Enabling these parameters sets the length of the addendum bar code to either 2 or5 characters.GTIN CompliantGTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes. Reading RangeThis parameter determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. 5.10.4.10 Code 93EnabledSet this parameter to on to enable “Code 93”.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 183Chapter 5: ConfigurationDecoded (Intermec ISCP)5.10.4.11 CodabarEnabledSet this parameter to on to enable “Codabar”.Start/Stop TransmitCodabar can use the following sets of characters as start and stop characters:a, b, c, d A, B, C, D a, b, c, d, /, t, n, *, eDC1, DC2, DC3, DC4 Thus, when a set is chosen, the first and last digits of a Codabar message must be one of those characters and the body of the message should not contain these characters. Setting this parameter to Not Transmitted strips the start and stop characters from this bar code. CLSI Library SystemWhen enabled, spaces are inserted after characters 1, 5, 10 in the 14-character label (used in the USA by libraries using the CLSI system). Check Digit VerificationWhen enabled, this parameter checks the integrity of a symbol to ensure it complies with a specified algorithm – either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council).Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Set Length L1, Set Length L2, And Set Length L3Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner.Length ModeYou can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Chapter 5: ConfigurationDecoded (Intermec ISCP)184 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualField Size/CharRefer to page 143 for details.5.10.4.12 MSI PlesseyEnabledSet this parameter to on to enable “MSI”.Enable PlessySet this parameter to on to enable “Plessy”.Check Digit VerificationThe available options for this parameter are MOD 10 Check and Double MOD 10 Check. This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Plessy Transmit Check DigitIf the check digit is to be transmitted with the Plessy data, this parameter must be enabled.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Plessy Minimum LengthMinimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 185Chapter 5: ConfigurationDecoded (Intermec ISCP)5.10.4.13 Code 11EnabledSet this parameter to on to enable “Code 11”.Check Digit VerificationThe available options for this parameter are MOD 10 Check and Double MOD 10 Check.This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.5.10.4.14 Interleaved 2 of 5EnabledSet this parameter to on to enable “Interleaved 2 of 5”.Reading RangeThis parameter determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Check Digit VerificationThe available options for this parameter are Disabled, MOD 10 Check and French CIP. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Chapter 5: ConfigurationDecoded (Intermec ISCP)186 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualNote: French CIP (French pharmaceutical) is only used with bar codes contain-ing 7 characters.Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Set Length L1, Set Length L2, And Set Length L3Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner.Length ModeYou can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.Field Size/CharRefer to page 143 for details.5.10.4.15 Matrix 2 of 5EnabledSet this parameter to on to enable “Matrix 2 of 5”.Minimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.5.10.4.16 Discrete 2 of 5EnabledSet this parameter to on to enable “Discrete 2 of 5”.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 187Chapter 5: ConfigurationDecoded (Intermec ISCP)Standard 2 of 5 FormatThis parameter allows you to choose a standard format – either Identicon (6 start/stop bars) or Computer Identics (4 start/stop bars).Check Digit VerificationThe available options for this parameter are Disabled and MOD 10 Check. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check DigitIf the check digit is to be transmitted with the data, this parameter must be enabled.Set Length L1, Set Length L2, And Set Length L3Lengths for “Discrete 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner.Length ModeYou can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.Field Size/CharRefer to page 143 for details.5.10.4.17 TelepenEnabledSet this parameter to on to enable “Telepen”.FormatThis parameter allows you to set the bar code character format to either ASCII or Numeric.
Chapter 5: ConfigurationDecoded (Intermec ISCP)188 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualMinimum LengthMinimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/CharRefer to page 143 for details.5.10.4.18 RSS Code (Reduced Space Symbology)EnableSetting this parameter to on enables “RSS Code” scanning capability.Enable RSS-14RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned.Enable RSS Limited“RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read omni-directionally.Enable RSS Expanded“RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but they can be split into sections and stacked several rows high, reducing the length of the symbol, while increasing the capacity of data that can be stored. “RSS Expanded” code can be omni-directionally scanned.Field Size/CharRefer to page 143 for details.5.10.4.19 PDF-417EnabledSet this parameter to on to enable “PDF-417”.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 189Chapter 5: ConfigurationDecoded (Intermec ISCP)Field Size/CharRefer to page 143 for details.5.10.4.20 Micro PDF-417EnabledSet this parameter to on to enable “Micro PDF-417”.Code 128 EmulationWhen this parameter is enabled, the scanner transmits data from certain Micro PDF-417 symbols as if it was encoded in Code 128 symbols. If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes:]C1if the first codeword is 903-907, 912, 914, 915]C2if the first codeword is 908 or 909]C0if the first codeword is 910 or 911If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes:]L3if the first codeword is 903-907, 912, 914, 915]L4if the first codeword is 908 or 909]L5if the first codeword is 910 or 911Field Size/CharRefer to page 143 for details.5.10.4.21 CodablockEnable Codablock ASet this parameter to on to enable “Codablock type A”.Enable Codablock FSet this parameter to on to enable “Codablock type F”.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationImager190 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.5 Imager• Tap on the Scanner drop-down menu, and choose Imager.5.10.5.1 Imager OptionsTekImager EnabledSetting this option to on enables the imager installed in your hand-held.Continuous Scan ModeSetting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down.Center Bar Code OnlyNote: This parameter must be disabled when reading Composite bar codes.When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker be read. When this parameter is set to on, the target dot is pointed at the centre image and only that image is returned.Max Number BarcodesThis parameter specifies the maximum number of bar codes the imager will attempt to decode in an image. A maximum of 6 bar codes can be decoded at one time.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 191Chapter 5: ConfigurationImagerBarcodes Must DecodeThis parameter specifies the minimum number of bar codes that the imager must decode in order to report success. Note: This number must be less than the number of bar codes assigned to “Max Number Barcodes”. The driver validates and reassigns the valueif necessary.Window Width“Window Width” determines the width of the captured image in pixels. Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use the Window Width value to horizon-tally center the image in the field of view.Window Height This parameter determines the height of the captured image in pixels. Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use “Window Height” value to vertically center the image in the field of view. Dot Time (msec)The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner begins capturing images. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000. A value of 0 disables the target dot.5.10.5.2 Imager Advanced OptionsImportant: Do not adjust the advanced options without first consulting Psion Teklogix technical support.Factory Defaults On RebootThe value assigned to this parameter determines whether or not the driver will restore the factory defaults to the imager device on the next reboot. Note: The driver will default the imager device on a ‘clean’ reset, regardless of the value of this parameter.
Chapter 5: ConfigurationImager192 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualMin Scan DurationThis parameter defines the minimum amount of time in seconds that the imager will scan when the trigger is pressed and held down without successful decode. Note: The actual scan duration when the trigger is pressed relies on the value assigned to Captures Per HW Trigger, below.Captures Per HW TriggerThe value assigned to this parameter determines the number of captures the imager device will take while the imager's internal hardware trigger is held down. Note: This parameter, together with “Min Scan Duration”, determines the actual scan duration. When the scan trigger is pressed and held down, the driver starts a timer based on the value of “Min Scan Duration” and also sends a command to emulate the hardware trigger. When completed, if the time has not yet expired, it will send another command to the imager device, forcing the imager to flash again using the value assigned to “Captures Per HW Trigger”.Auto ExposureImportant: This parameter value should only be changed by qualified Psion Teklogix personnel. It should be left at the default value – ‘on’.Setting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the adjustment is insufficient, further adjustments are made automatically before another image is captured.Fast ConvergeNote: “Auto Exposure” must be set to ‘on’ in order for this parameter to function. Keep in mind that while this parameter can improve imager performance, “Fast Converge” increases battery power consumption.Setting this parameter to on speeds the “Auto Exposure” process. It allows the imager to rapidly snap a number of bar code capture attempts while finding ideal values for gain, integration and illumination.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 193Chapter 5: ConfigurationImagerMax Gain, Max Integration And Max IlluminationImportant: These parameter values should only be changed by qualified Psion Teklogix personnel. These parameters represent internal values used by the 2D imager. The “Auto Exposure” parameter automatically adjusts the “Max Gain”, “Max Integration” and “Max Illumination” parameters to produce the best bar code read. Keep in mind that “Auto Exposure” must be set to on in order for these parameter values to be automatically adjusted.Double-tapping on any of these parameters displays an associated dialog box in which an allowable range is displayed: Max Gain – 357 to 7920, Max Integration – 0 to 65535, Max Illumination – 0 to 7.Decoder TimeoutThe decoder is a set of algorithms that examine the image and attempt to find the bar codes, and then turn the pixels into data that the computer can use—this process takes time. “Decoder Timeout” limits the amount of time the decoder will spend attempting to decode an image, and forces it to stop and grab a new image, which will probably be easier to decode. Note: When decoding multiple bar codes in one image, the value assigned to ‘Decoder Timeout’ should be increased to 200ms/extra bar code after the first.Adaptive Windowing“Adaptive Windowing” is an advanced technique used to speed up bar code recognition in certain applications. This parameter automatically reduces the size of the window to the user-programmed window size when it successfully decodes (which reduces decode time the next time it is used), but increases it to the full size window (1280x1024 for SX5303) on a failed decode.Note: This feature assumes that you have reached an understanding about how the device operates in your application, and that, after a learning period, operators will get used to using the imager in one particular way. It also assumes that a trained operator will usually only have near miss scenar-ios.
Chapter 5: ConfigurationImager194 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualConstant Illumination“Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on the observer. Instead of the illumination turning on and off every time the device attempts a decode (2-4 times per second), the illumination stays on from the time the trigger is pulled until a decode is successful. This feature is useful in low light environments, since it will also reduce the distraction that the illumination can have on nearby co-workers.5.10.5.3 Code 39 SettingsEnabledSet this parameter to on to enable “Code 39”.Field Size/CharRefer to page 143 for details.5.10.5.4 Code 128 SettingsEnabledSet this parameter to on to enable “Code 128”.Field Size/CharRefer to page 143 for details.5.10.5.5 EAN 13EnabledSet this parameter to on to enable “EAN 13”.AddendumAn addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored.• Double-tap on Addendum to display a dialog box listing your options.• Highlight an item, and tap on OK.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 195Chapter 5: ConfigurationImagerWhen “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this parameter is set to Optional, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required, the scanner does not accept the main bar code without an addendum.Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if at least some of the bar codes being read have addendums.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.5.6 EAN 8EnabledSet this parameter to on to enable “EAN 8”.AddendumRefer to “Addendum” on page 194.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.5.7 UPC AEnabledSet this parameter to on to enable “UPC A”.AddendumRefer to “Addendum” on page 194.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.5.8 UPC EEnabledSet this parameter to on to enable “UPC E”.
Chapter 5: ConfigurationImager196 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualAddendumRefer to “Addendum” on page 194.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.10.5.9 Code 93EnabledSet this parameter to on to enable “Code 93”.Field Size/CharRefer to page 143 for details.5.10.5.10 CodabarEnabledSet this parameter to on to enable “Codabar”.Field Size/CharRefer to page 143 for details.5.10.5.11 Interleaved 2 of 5EnabledSet this parameter to on to enable “Interleaved 2 of 5”.Field Size/CharRefer to page 143 for details.5.10.5.12 RSS Code (Reduced Space Symbology)EnableSetting this parameter to on enables “RSS Code” scanning capability.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 197Chapter 5: ConfigurationImager5.10.5.13 CompositeImportant: To successfully read this type of bar code, the two types of symbolo-gies included in a composite bar code must be enabled. EnabledSet this parameter to on to enable “Composite” bar codes.5.10.5.14 PDF-417EnableSetting this parameter to on enables PDF-417 two dimensional (2D) coding.Field Size/CharRefer to page 143 for details.5.10.5.15 Micro PDF-417EnableSetting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417.Field Size/CharRefer to page 143 for details.5.10.5.16 2D Data MatrixEnableSet this parameter to on to enable “Data Matrix”.Field Size/CharRefer to page 143 for details.5.10.5.17 2D QR CodeEnabledSet this parameter to on to enable “2D QR Code”.
Chapter 5: ConfigurationImager198 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualField Size/CharRefer to page 143 for details.5.10.5.18 2D MaxicodeEnabledSet this parameter to on to enable “2D Maxicode”.Field Size/CharRefer to page 143 for details.5.10.5.19 2D AztecEnabledSet this parameter to on to enable “Aztec”.Field Size/CharRefer to page 143 for details.5.10.5.20 Postal: PlaNETEnabledSet this parameter to on to enable “Postal: PlaNET”.Field Size/CharRefer to page 143 for details.5.10.5.21 Postal: PostNETEnabledSet this parameter to on to enable “Postal: PostNET”.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 199Chapter 5: ConfigurationImager5.10.5.22 Postal: AustralianEnabledSet this parameter to on to enable “Postal: Australian”.Field Size/CharRefer to page 143 for details.5.10.5.23 Postal: JapaneseEnabledSet this parameter to on to enable “Postal: Japanese”.Field Size/CharRefer to page 143 for details.5.10.5.24 Postal: KoreanEnabledSet this parameter to on to enable “Postal: Korean”.Field Size/CharRefer to page 143 for details.5.10.5.25 Postal: RoyalEnabledSet this parameter to on to enable “Postal: Royal”.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationOptions200 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.6 OptionsThis tab allows you to tailor the double-click parameters and the display options associated with your scanner.5.10.6.1 Double Click ParametersClick Time (msec)This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature.A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.Click DataFor both integrated and external scanners, this parameter determines which character is sent to the application installed in your hand-held following a double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 201Chapter 5: ConfigurationOptions5.10.6.2 Display ParametersScan ResultWhen this parameter is enabled, the type of bar code and the result of the scan appear on the screen. Note that this information is only displayed after a successful decode and is visible only while the scanner trigger is pressed. When the trigger is released, this information is cleared from the screen.Scan IndicatorWhen this parameter is enabled, the laser warning logo appears on the display whenever the scanner is activated.Scan Result Time (sec)The value assigned to the “Scan Result Time (sec)” parameter determines how long the scan results of a successful scan are displayed on the screen. Time is measured in seconds, and a value of “0” (zero) disables the parameter. When you choose this option, a dialog box appears where you can enter a value.Note: To remove the scan result from the screen before the “Result Time” has expired, point the scanner away from the bar code and press the trigger.Good Scan Beep And Bad Scan BeepThese parameters determine whether or not the hand-held emits an audible scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it.Soft Scan TimeoutThis parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the SDK function, instead of a physical user trigger press). The value assigned to this parameter determines the soft-scan timeout from 1 to 10 sec. (default is 3 sec.). Scan Log FileIf this parameter is enabled, the input barcode and the modified/translated output bar code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the “Scan Log File” is enabled, there is a slight performance effect when performing multiple scans since the log file is written to persistent storage.
Chapter 5: ConfigurationTranslations Tab202 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual5.10.7 Translations TabThe Translations tab allows you to define up to 10 cases, each consisting of up to 10 rules in sequential order. Only one case will be applied to a bar code and a case will only be applied if all rules specified in the case are successful – if a rule within a case fails, the entire case fails.•In the Translation tab, tap on the Case # to create rules.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 203Chapter 5: ConfigurationTranslations Tab• Tap on the No rule dropdown menu to display the rules.When you choose a rule, an associated screen is displayed in which you can define the rule.5.10.7.1 Case RulesThe case rules are defined as follows:• No rule – ignored.• Search and replace – replaces all instances of the match string. (Note that this rule cannot fail.)• Match at index – matches the match string at a specified index.
Chapter 5: ConfigurationTranslations Tab204 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual• Match and replace at index – matches the match string at a specified index and replaces/changes it.• Replace at index – replaces/changes unspecified data in a given range.• Add barcode prefix/suffix – adds a global prefix or suffix.• Verify barcode size – verifies the bar code size. This rule should generally be assigned first, before creating subsequent rules.Note: Keep in mind that the effects of previously applied rules must be taken into account when creating subsequent rules. For example, if the bar code size is important, it should be checked before any rules that might change the size are applied.Translation information about the status of each case/rule is displayed in the scan log file (see “Scan Log File” on page 201) when enabled. This is useful if a case fails, and you are trying to determine why a rule is failing.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 205PERIPHERAL DEVICES & ACCESSORIES 66.1 Carrying Accessories.............................20961 Protective Carrying Case........................2126.2 The Batteries.................................2136.3 Adaptor Cable Options............................2136.4 Chargers And Docking Stations.......................2136.4.1 Installation–Chargers And Docking Stations.............2146.4.2 Power Consumption Considerations..................2146.4.3 Operator Controls...........................2146.4.4 Important Charger Safety Instructions.................2146.5 Desktop Docking Station...........................2166.5.1 Charging A Battery Installed In The WORKABOUT PRO. . . . . . 2176.5.2 Charging A Spare Battery.......................2186.5.3 Battery Charge Duration........................2186.5.4 Charger LED Indicators........................2186.5.5 Troubleshooting The Charging Operation Of The Dock .......2186.5.6 Linking A WORKABOUT PRO To A PC ..............2186.5.7 Linking A WORKABOUT PRO To An Ethernet Network . . . . . . 2196.5.7.1 Network Access.........................2196.5.8 Troubleshooting The Docking Station Operations. . .........2196.8 Single Battery Charger–Model #WA3001-G1 . ...............2216.8.1 Inserting A Battery In The Single Battery Charger..........2226.8.2 Battery Charge Duration........................2226.8.3 Charge Indicators–The LED......................222
Chapter 6: Peripheral Devices & Accessories206 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual6.9 Quad Battery Charger–Model #WA3004-G1.................2236.9.1 Charging Batteries...........................2236.9.2 Battery Charge Duration........................2236.9.3 Charge Indicators–The LEDs......................2236.9.4 Troubleshooting . . . .........................2246.9.4.1 Excessive Charge Duration..................2246.9.4.2 Indicator Flashing Red..................... 2246.9.4.3 Power LED Does Not Light Up................2246.9.4.4 Indicator Does Not Light When Battery Installed....... 2246.10 Quad Docking Station–WA4204-G2 & WA4304-G2 ............2256.10.1 Quad Docking Station Setup.....................2256.10.2 Quad Indicators............................2266.10.3 Inserting A WORKABOUT In The Quad Docking Station .....2266.10.4 Network Access............................2266.10.4.1 Network Addressing..................... 2266.10.5 Battery Charging–LED Behaviour..................2276.10.6 Troubleshooting . . . .........................2276.10.6.1 Network Link Unsuccessful.................2276.10.6.2 Hand-Held LED Does Not Light When Docked....... 2276.12 Scanners And Imagers............................2326.12.1 Scanning Techniques.........................2326.12.2 Troubleshooting . . . .........................2336.12.3 Operating One Dimensional (1D) Laser Scanners..........2336.12.4 Operating Internal PDF Laser Scanners................234
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 207Chapter 6: Peripheral Devices & Accessories6.12.5 Operating Two Dimensional (2D) Imagers..............2346.13 Bluetooth Peripherals............................235
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 213Chapter 6: Peripheral Devices & AccessoriesThe Batteries• Fasten the belt comfortably around your waist. Slide the adjustable ring on the belt to tighten the holster in place.• Connect the safety tether to one of the clips on the bottom of the soft shell holster. Connect the other end to the hole in the end of the WORKABOUT PRO pistol grip. This tether will catch the unit in case of a drop. The tether can be adjusted to the operator’s height. The clips will break away in case of a severe force.6.2 The BatteriesThe WORKABOUT PRO will operate with any of the following Lithium-Ion battery packs:• High-Capacity – Model WA3006• Super High-Capacity – Model WA3010In addition to the main battery, the hand-held is equipped with a replaceable, rechargeable Lithium-Ion backup battery.6.3 Adaptor Cable OptionsThe following are adaptors can be ordered for your WORKABOUT G2:6.4 Chargers And Docking StationsImportant: Keep in mind when ordering a charger or docking station, you must also order the appropriate power cord separately.Psion Teklogix offers a variety of chargers and docking stations for the WORKABOUT PRO. These include:• AC Adaptor–Model No. PS1050-G1Model Number Adaptor Cable DescriptionWA1002 Tether to USB device. This cable is used to connect USB devices such as USB Flash memory devices.WA4020-G2 Tether to RS232. This is a full RS232 port on COM2.WA4001-G2 Tether to USB Client. (For ActiveSync)WA4010-G1 USB to Ethernet adaptor.WA4015 USB/RS232 adaptor. This cable is used with docking station WA4003-G2.
Chapter 6: Peripheral Devices & AccessoriesInstallation–Chargers And Docking Stations214 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual• Cigarette Lighter Adaptor–Model No. WA3113-G2• Single Battery Charger–Model No. WA3001-G1• Quad Battery Charger–Model No. WA3004-G1• Desktop Docking Station–Model No. WA4003-G2• Quad Docking Station For 7527 C G2–Model No. WA4204-G2• Quad Docking Station For 7527 S G2–Model No. WA4304-G2 6.4.1 Installation–Chargers And Docking StationsWhen installing a charger or docking station, consider the following guidelines. • Keep chargers and docking stations away from excessive dirt, dust and contaminants. • Chargers will not charge batteries outside an ambient temperature range of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or docking station be operated at room temperature–between 18° C and 25° C (64° F to 77° F) for maximum performance.After unpacking your unit:• Visually inspect the charger for possible damage. • Install the IEC power cord and apply power. 6.4.2 Power Consumption ConsiderationsCheck to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit. • Quad charger–can consume up to 2A @ 120VAC or 1A @ 240VAC.• Quad docking station–can consume up to 3A @ 120VAC or 1.5A @ 240VAC.6.4.3 Operator ControlsWORKABOUT PRO docking stations and chargers have no operator controls or power switches.6.4.4 Important Charger Safety Instructions•SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for battery charger s.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 215Chapter 6: Peripheral Devices & AccessoriesImportant Charger Safety Instructions• Before using the battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.• The mains power cord shall comply with national safety regulations of the country where the equipment is to be sold.• Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock, or personal injury.• To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord.• Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress.• Do not operate the charger with a damaged cord or plug. Replace immediately.• Do not operate the charger if it has received a sharp blow, been dropped, or other-wise damaged in any way; it should be inspected by qualified service personnel.• Do not disassemble the charger; it should be repaired by qualified service person-nel. Incorrect reassembly may result in electric shock or fire.• To reduce risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.• An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure:• The plug pins on the extension cord are the same number, size, and shape as those on the charger.• The extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG.• Do not expose the charger to rain or snow.• Do not place batteries in the charger if they are cold from extended exposure to a freezer or outside temperatures below 10°C (50°F). Allow them to warm up to room temperature for at least two hours.• Do not use the charger if, after an overnight charge, any of the batteries feel warmer than the charger housing. The charger should be inspected by qualified service personnel.• Do not use the charger if any of the batteries or the charger get more than luke-warm. The equipment should be inspected by qualified personnel.
Chapter 6: Peripheral Devices & AccessoriesCharging A Spare Battery218 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual6.5.2 Charging A Spare Battery• Insert the battery in the spare battery charge well at the back of the docking station, aligning the contacts on the battery with the contacts in the spare battery charge well.6.5.3 Battery Charge DurationA fully discharged battery can take up to 5 hours to charge. The desktop docking station stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. 6.5.4 Charger LED IndicatorsThe desktop docking station is equipped with a single dual-coloured LED indicator in the lower-right corner of the front panel.Table 6.2 Desktop Battery Charger LED BehaviourNote: Battery charging continues whether the hand-held is switched on or off.6.5.5 Troubleshooting The Charging Operation Of The DockThe quad battery charger troubleshooting section beginning on page 224 also applies to the charging behaviour of the desktop docking station.6.5.6 Linking A WORKABOUT PRO To A PCThe desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station.Note: For information about data transfer with the Windows XP operating sys-tem and ActiveSync and with the Vista operating system, refer to “Data LED Behaviour Charge StatusOff No battery detected in the slot.Solid Green Charge complete.Fast Flashing Green Battery charged to less than 80% of capacity.Slow Flashing Green Battery charged to greater than 80% of capacity.Solid Red Battery temperature outside of charge range–0° C to 50 °C.Flashing Red Battery is not charging. Battery fault.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 219Chapter 6: Peripheral Devices & AccessoriesLinking A WORKABOUT PRO To An Ethernet NetworkTransfer Between The PC & The Hand-Held” on page 20.To link the WORKABOUT PRO to a PC:• Insert the hand-held in the desktop docking station.• Insert the USB cable into the docking station Client USB connector. Attach the other end of the cable to a USB port on the PC.6.5.7 Linking A WORKABOUT PRO To An Ethernet NetworkAn USB-Ethernet adaptor cable – model number WA4010-G1 – is used to connect the WORKABOUT PRO to an Ethernet network through a desktop docking station.• Insert the adaptor’s USB connector into the Host USB port on the desktop docking station.• Connect your network Ethernet cable to the Ethernet port on the adaptor cable.6.5.7.1 Network AccessThe hand-held unit automatically detects insertion into the desktop dock and loads the appropriate drivers to communicate with the USB-Ethernet converters.Network AddressingThe host application uses standard TCP/IP protocol to name, locate and communicate with a specific WORKABOUT PRO on the network. If a link is established between a WORKABOUT PRO and a host, the application on the host and on the hand-held must have a recovery mechanism in the event that the WORKABOUT PRO is removed from the dock, interrupting the link.6.5.8 Troubleshooting The Docking Station OperationsThe indicators, applications and drivers required to use and monitor the desktop docking station as a dock (as opposed to a charger) are installed on the WORKABOUT PRO–no applications are present on the docking station itself.6.6 AC Wall Adaptor– Model #PS1050-G1The AC wall adaptor available for your WORKABOUT PRO allows you to operate your hand-held using AC power while charging the battery inserted in the unit.
Chapter 6: Peripheral Devices & AccessoriesCigarette Lighter Adaptor–Model #WA3113-G2220 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualAdaptor plugs suitable for use in the following countries are shipped with the AC wall adaptor: United Kingdom, Australia, Europe and North America.• Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug into the Universal AC power supply, snapping it into place. These two pieces, coupled together, are referred to as an AC wall adaptor.• Insert the DC power plug into the DC IN socket at the base of WORK-ABOUT PRO, located between the tether and LIF ports.• Plug the pronged end into an AC outlet.6.7 Cigarette Lighter Adaptor–Model #WA3113-G2Important: It is critical that you review the safety instructions outlined in the quick start guide enclosed with your cigarette lighter adaptor before using the accessory.Universal AC Power SupplyAdaptor PlugsDC Power Plug
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 221Chapter 6: Peripheral Devices & AccessoriesSingle Battery Charger–Model #WA3001-G1The cigarette lighter adaptor allows you to power your hand-held and recharge your battery using power drawn from your vehicle’s cigarette lighter outlet.Figure 6.4 Cigarette Lighter Adaptor• Unscrew the adaptor end-cap, and remove the fuse inside the adaptor.• Replace it with the fuse provided with your kit, and screw the adaptor end-cap back into position.• Insert the DC power plug into the DC IN socket at the base of the WORK-ABOUT PRO.• Insert the cigarette lighter adaptor plug into cigarette lighter outlet in your vehicle.6.8 Single Battery Charger–Model #WA3001-G1The single battery charger is designed to charge a single battery. It has a DC IN socket and is equipped with one LED that indicates the status of the charge process. DC Power PlugCigarette LighterAdaptor PlugAdaptor End-Cap
Chapter 6: Peripheral Devices & AccessoriesInserting A Battery In The Single Battery Charger222 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual6.8.1 Inserting A Battery In The Single Battery Charger• Insert the DC power plug into the charger. Plug the pronged end of the power cable into an AC outlet.• Install the battery, aligning the contacts on the battery with the contacts in the battery charge well.6.8.2 Battery Charge DurationIt can take up to 4 hours to fully charge a battery. The single battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. The 75% charge indicator is handy if you need a quick recharge–a quick charge often takes less than one hour.6.8.3 Charge Indicators–The LEDThe LED on the top of the charger indicates battery charge progress. Table 6.3 Single Battery LED BehaviourNote: Battery charging continues whether the hand-held is switched on or off.LED Behaviour Charge StatusOff No battery detected in the charge well.Solid green Battery is fully charged.Fast flashing green Battery is charged to 75% of capacity.Slow flashing green Charge in progress.Solid red Battery is outside ambient temperature range of 0° C to 45 °C (32° F to 113° F).Flashing red Charge alarm indicating a charging circuit problem. Refer to “Troubleshooting” on page 224 for details.Flashing red then green in a 3 second cycle Power up test sequence.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 223Chapter 6: Peripheral Devices & AccessoriesQuad Battery Charger–Model #WA3004-G16.9 Quad Battery Charger–Model #WA3004-G1The quad battery charger is designed to charge up to four Lithium Ion batteries at one time.Note: The gang charger is shipped with a user manual. It is critical that this manual be reviewed for additional information and updates.6.9.1 Charging Batteries• Slide the battery into a charge well, aligning the contacts on the battery with the contacts in the charge well.6.9.2 Battery Charge DurationA fully discharged battery can take up to 4 hours to charge. The quad battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. The 75% charge indicator is handy if you need a quick recharge–a quick charge often takes less than one hour.6.9.3 Charge Indicators–The LEDsEach battery charge well is equipped with an LED to indicate the charge status of the battery. When a battery is inserted in the charger, the colour and behaviour of the LED associated with the charge well in use indicates the status of the charge. Refer to Table 6.3 on page 222 for details.
Chapter 6: Peripheral Devices & AccessoriesTroubleshooting224 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual6.9.4 Troubleshooting6.9.4.1 Excessive Charge DurationThe charger is equipped with a recalibration function–a function that fully discharges and then fully recharges the battery. This process is necessary to recalibrate the battery capacity gauge internal to the battery. The charger attempts recalibration when: • the battery capacity is at less than 30%, and • the battery has undergone more than 40 partial charge cycles since the last full discharge.The recalibration function extends the charge time by up to 2 hours.6.9.4.2 Indicator Flashing RedIf the indicator flashes red:• Remove all batteries and disconnect the mains power cable. • Wait at least 20 seconds, and then plug the cable in again.If any of the charge well LEDs continue to flash red, the charger is defective and requires service. If all indicators are flashing red, there is a power supply problem and the charger requires service. 6.9.4.3 Power LED Does Not Light Up• Remove all batteries, and unplug the charger. • Connect another device to the mains outlet to ensure there is power. • Remove the IEC mains power cable from the charger, and check it for damage. • Reconnect the mains cable in the charger and mains outlet. If the power LED still does not light up:• Unplug the mains cable, and check the fuse at the rear of the charger. If the fuse appears to be intact, the charger requires service.6.9.4.4 Indicator Does Not Light When Battery Installed• Remove the battery, and clean the contacts on the battery and the charge well. • Reinstall the battery, and check that it is fully seated in the charger well.• Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken).
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 225Chapter 6: Peripheral Devices & AccessoriesQuad Docking Station–WA4204-G2 & WA4304-G2• Try inserting a battery that you know to be working in the charger well. • Reconnect the mains power cable, and check that the charger well indicator flashes at powerup.6.10 Quad Docking Station–WA4204-G2 & WA4304-G2Note: WA4204-G2 is designed for WORKABOUT PRO C models; WA4304-G2 is designed for WORKABOUT PRO S models.The quad docking station is shipped with a docking manual. It is critical that this manual be reviewed for additional information and updates.The quad docking station permits each of four docked WORKABOUT PROs to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to operate and fast charge the batteries in the units. 6.10.1 Quad Docking Station SetupAfter unpacking the unit:• Visually inspect the unit for any damage. • Install the IEC power cord and apply power. A green indicator in the lower-right corner of the front panel lights up to indicate that power is present. • Attach a CAT5 RJ45 network patch cable (supplied) between your network and the RJ45 jack on the rear of the dock.
Chapter 6: Peripheral Devices & AccessoriesQuad Indicators226 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualA green LED is illuminated next to the RJ45 connector when a valid network link is established.A user application must be loaded onto each WORKABOUT PRO that utilizes the quad dock for communication. When the network is connected and this application is loaded, the quad dock is ready for use.6.10.2 Quad IndicatorsThe quad dock is equipped with a power indicator LED and RJ45 link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector.6.10.3 Inserting A WORKABOUT In The Quad Docking Station• Slide the WORKABOUT PRO into the cradle portion of the quad dock until lightly latched. The hand-held detects that it is in a quad dock and momentarily displays the appropriate icon in the navigation bar at the top of the screen–. The LED on the hand-held unit lights up to show it has external power and may start charging the battery.Interaction with the WORKABOUT PRO while in the quad dock is a function of the user application software used to communicate with the host network.6.10.4 Network AccessThe quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held units. The hand-helds are connected to an internal USB hub. The hand-held unit automatically detects insertion into a quad docking station and loads the appropriate drivers to communicate with the USB/Ethernet converters.6.10.4.1 Network AddressingAlthough the USB converters have fixed Ethernet MAC addresses, there is generally no correlation between these addresses and a specific hand-held. The host application uses standard TCP/IP protocol to name, locate and communicate with a specific WORKABOUT PRO on the network. If a link is established between a WORKABOUT PRO and a host, the application on the host and on the hand-held must have a recovery mechanism in the event that the WORKABOUT PRO is removed from the dock and the link is interrupted.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 227Chapter 6: Peripheral Devices & AccessoriesBattery Charging–LED Behaviour6.10.5 Battery Charging–LED BehaviourThe quad docking station supplies DC power to enable the WORKABOUT PRO internal fast charger. Charge status is displayed on the hand-held LED–the LED turns red while the battery is being charged and turns green once the charge is complete. If the battery is fully charged when the unit is inserted in the docking station, the LED flashes red for less than a second and then turns green. Battery charging continues whether the WORKABOUT PRO is switched on or off.It can take up to 4 hours to fully charge the internal battery.6.10.6 TroubleshootingThe indicators, applications and drivers required to use and monitor the docking station are installed on the WORKABOUT PRO–no indicators or applications are present on the docking station itself.6.10.6.1 Network Link UnsuccessfulIf a network link fails, the WORKABOUT PRO application alerts the operator that the link was unsuccessful.6.10.6.2 Hand-Held LED Does Not Light When Docked• Check that the quad docking station has power–is the Power LED on the docking station illuminated?• Try inserting the WORKABOUT PRO in another well in the quad dock.• Check for dirt or contamination on the docking contacts at the bottom of the WORKABOUT PRO. Wipe the contacts with a damp cloth if necessary. • Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if they appear to be dirty or discoloured.• Check that the pogo pins are not bent or damaged.• Remove and reinsert the WORKABOUT PRO in the cradle, and check that the latch is holding the unit in place (the pogo pins must be compressed for proper contact).• Make certain that the battery installed in the WORKABOUT PRO is not defective.
Chapter 6: Peripheral Devices & AccessoriesOperating Internal PDF Laser Scanners234 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualImportant: If an aiming dot is available on the installed scanner, the dot will be enabled for a configurable time period (including off), after which normal scanning begins. Refer to “Dot Time (msec)” on page 137 for details. Double-clicking the trigger will override the aiming delay and initiate an immediate scan. Note that the aiming dot is standard on long-range and high visibility internal scanners.• Aim at the bar code and press the scan key or the trigger. A scan beam and a warning indicator appear until a successful decode is achieved or six seconds have elapsed. 6.12.4 Operating Internal PDF Laser ScannersThis scanner decodes PDF417 two-dimensional bar codes.• Turn the hand-held on. Wait until the unit has booted up completely.• Aim at the bar code and press the scan key or the trigger. The beam expands into a rectangle covering the bar code to properly scan it. The scan beam and a warning indicator are visible until a successful decode is achieved or three seconds have elapsed.6.12.5 Operating Two Dimensional (2D) ImagersAn imager takes a snap shot of a single bar code or multiple bar codes (at one time). It can find a bar code regardless of its orientation—that is, even a bar code printed at a 45 degree angle to the hand-held will be decoded successfully. Note: When scanning multiple bar codes, ensure that all of the desired bar codes are within the field of view of the scanner. It is possible that even when all bar codes are within the field of view, not all of them will be decoded. Only successfully decoded bar codes are passed to the applica-tion program. The application program then issues a warning, asking that you scan the missing bar codes.When scanning a single bar code, ensure that only the desired bar code is within the field of view of the scanner.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 235Chapter 6: Peripheral Devices & AccessoriesBluetooth PeripheralsBecause imagers generally have a shorter depth of field than laser scanners, some practise may be required to find the optimal distance from the types of bar codes being scanned. Although the imager includes illumination LEDs, ambient light will help the imager decode the bar codes, especially if the bar code is far from the hand-held.Important: Keep in mind that the imager scanner is a camera, and the LED illumination is a flash. Glare can be an issue on reflective media such as plastic coated bar codes, just as glare is an issue for photog-raphers. When pointing at a shiny surface, either shift the bar code to the side or top, or angle the bar code so that the glare reflects away from the imager scanner.Most imagers take several ‘snap shots’ of the bar code in order to decode it. It is normal for the LEDs to flash two or three times. Hold the unit steady between flashes to improve decode performance. • Turn the hand-held computer on. Wait until the unit has booted up completely.• Aim at the bar code and press the scan key or the trigger. Hold the trigger until a successful or failed scan result is obtained.• When the scan button or trigger is pressed, a red, oval shaped light (the framing marker) is displayed. Centre the framing marker in the field—either in the centre of the bar code you want to scan or in the centre of the area in which multiple bar codes are to be scanned.The illumination LEDs will flash (typically several times) and a picture of the bar code(s) is taken.6.13 Bluetooth PeripheralsThe WORKABOUT PRO is equipped with a Bluetooth radio, making it is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners, printers, and so on. The range of the Bluetooth radio is limited to approximately 5 meters.Psion Teklogix provides built-in support for the Bluetooth peripherals listed below.• GSM/GPRS universal handset•Bluetooth printer•Bluetooth headset
Chapter 6: Peripheral Devices & AccessoriesBluetooth Peripherals236 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualKeep in mind that Bluetooth and IEEE 802.11b/g radios both operate in the 2.4GHz band. Although the WORKABOUT PRO includes features to minimize interference, performance of the system will not be optimal if you use both radios simultaneously. Typically, when both radios operate in the hand-held at the same time, they cannot transmit simultaneously–this has a negative impact on overall system throughput. To minimize the impact on the backbone 802.11g network, Psion Teklogix recommends using Bluetooth peripherals that have low transaction rates (such as printers and scanners).Refer to “Bluetooth Setup” on page 109 for information about setting up your Blue-tooth devices for communication. In addition, review the manual shipped with your Bluetooth device to determine the method used to pair with the WORKABOUT PRO host.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 237SPECIFICATIONS 77.1 WORKABOUT PRO Specifications.....................2397.2 Radio Specifications.............................2447.3 Battery Specifications ............................2467.3.1 High-Capacity (Model WA3006) . . . . . . . . . . . . . . . . . . .2467.3.1.1 Electrical Specifications...................2467.3.1.2 Standard Discharge .....................2477.3.1.3 Safety Data..........................2487.3.1.4 Safety License........................2497.3.1.5 Environmental Test .....................2497.3.2 Super High-Capacity (Model WA3010) . . . . . . . . . . . . . . .2507.3.2.1 Electrical Specifications...................2507.3.2.2 Standard Discharge .....................2517.3.2.3 Safety Data..........................2527.3.2.4 Safety License........................2527.3.2.5 Environmental Test .....................2537.4 Scanner Model Numbers...........................2547.5 Scanner Specifications............................2547.5.1 SE 1223HP, LR, ALR And SE 955HP Specifications . . . . . . . .2547.5.1.1 SE 1223HP Decode Zone..................2567.5.1.2 SE 1223LR Decode Zone..................2567.5.1.3 SE 1223ALR Decode Zone . . . . . . . . . . . . . . . . .2567.5.1.4 SE 955HP Decode Zone...................2577.5.2 EV15 Imager Specifications.....................2577.5.2.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . . .2587.5.3 HHP5180 Imager...........................2587.5.3.1 HHP5180 Imager Decode Zone . . . . . . . . . . . . . . .2597.5.4 SX5393 Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . .2607.5.4.1 SX5393 Imager Decode Zone . . . . . . . . . . . . . . . .261
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 239Chapter 7: SpecificationsWORKABOUT PRO SpecificationsNote: Performance specifications are nominal & subject to change without notice.7.1 WORKABOUT PRO SpecificationsModel Variants• WORKABOUT PRO C – Model 7527C-G2• WORKABOUT PRO S – Model 7527S-G2Platform• PXA270 @ 520 MHz, 32 bit RISC CPU• 128 MB flash, 128 MB RAMOperating System• Microsoft® Windows® CE 5.0Wireless CommunicationOptional expansion modules for: • 802.11b/g (via Compact Flash) operating in the 2.4GHz band:- Supports IEEE 802.11b data rates of 1,2,5.5 and 11Mbps using Direct Sequence Spread Spectrum (DSSS).- Supports IEEE 802.11g data rates of 6,9,12,24,36,48 and 54Mbps,using Orthagonal Frequency Division Multiplexing (OFDM) base band modulation
Chapter 7: SpecificationsWORKABOUT PRO Specifications240 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualBar Code Applications• Optional 1D imager expansion module• Optional 2D imager expansion module• Optional 1D SE955 laser scanner expansion module• Optional 1D SE1223 High Performance laser scanner expansion module• Optional bolt-on pistol gripNote: All are user upgradeableRFID Modules• UHF module- Frequency: 902 MHz or 928 MHz- Read range: up to 4.92 ft.(150 cm) [915MHz] and up to 2.62 ft.(80 cm) [868 MHz]- Tag supported: EPC Class 1 Gen 2, other protocols depending on regionsUser Interface• Color Touch Screen Display 3.6 in.(9.144 cm) diagonal- Full VGA 480x640 resolution- Transflective, portrait mode TFT- Adjustable Backlight
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 241Chapter 7: SpecificationsWORKABOUT PRO Specifications- Sunlight readable (for outdoor use)- High reliability LED backlight- Easily replaceable and customizable bezel• Touchscreen- Passive stylus or finger operation- Signature capture• Keyboards- Full Alpha-Numeric (C model)- Numeric (S model)- Ergonomically enhanced for ambidextrous, one-hand operation- Backlit, high durability hard-capped keys• Indicators And Controls- LED indicates battery charge statusProgramming Environment• Psion Teklogix Mobile Devices SDK• Hardware Development Kit (HDK)• .NET and C++ programming using Microsoft® Visual Studio® 2005• Java programming supporting JDK 1.2.2 or higher• Standard Protocol APIs- Windows sockets (CE .net)Application Software• Internet Explorer 6.0 incl.with Windows CE 5.0• Unique Psion Teklogix Voice Dialer and Contacts Manager incl.Windows CE 5.0• PTX Connect VoIP• Optional Open TekTerm terminal emulation software, supports IBM 5250,IBM 3270, HP2392, ANSI and TESS• Mobile Control Center (MCC) device management
Chapter 7: SpecificationsWORKABOUT PRO Specifications242 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualExpansion Slots• One SD/MMC memory card slot – user accessible• End-cap USB Interface supports GPS expansion module• 100-PIN expansion interface: supports PCMCIA (type II),GSM/GPRS EDGE and other third-party expansion modules developed using Psion Teklogix WORKABOUT PRO Hardware Developer’s Kit• Flex cable interface with robust connector: supports scanner (serial) and imager (USB) modules• One Type II CF Card SlotExternal Connectors• One Tether connection with full RS232 and USB 1.1 functionality• One Low-Insertion Force (LIF) docking connector• DC Power JackPower Management• Optional 3.7V, 3000 mAh High Capacity Battery Pack• Optional 3.7V, 4000 mAh Super High Capacity Battery Pack• Advanced Smart Battery with gas gauge• 3 power source options: Runs off battery, AC power, or automotive power supplies• Built-in charger• Rechargeable, user replaceable backup battery packEnvironmental• Withstands 26 drops (on 12 edges,8 corners, 6 faces) at 5 ft.(1.5 meters) to polished concrete while powered on and configured with accessories such as CF radio, scanner/imager, and pistol grip• Rain/Dust: IP65,IEC 60529• Operating Temperature: 14°F to 122°F (-10°C to +50°C)• 5%-95% RH non-condensing• Storage Temperature: -40°F to 140°F (-40°C to +60°C)
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 243Chapter 7: SpecificationsWORKABOUT PRO SpecificationsPhysical Dimensions And Weight• WORKABOUT PRO C:- 8.775 in. x 2.95/3.94 in. x 1.22/1.65 in. (223 mm x 75/100 mm x 31/42 mm)• WORKABOUT PRO S:- 7.87 in. x 2.95/3.94 in. x 1.22/1.65 in. (200 mm x 75/100 mm x 31/42 mm)• Weight (w/o battery pack):- WORKABOUT PRO C:1 lbs (455 g)- WORKABOUT PRO S:.859 lbs (390 g)Power Accessories• AC power supply (charge & operate hand-held)• Automotive power supply (charge & operate hand-held)• Single and Quad slot battery pack chargers• Powered cradle for vehicle mount applicationsCommunication Accessories• Quad Dock (4-site) with 10/100 BaseT Ethernet and charge functions• Desktop Docking Station (charges hand-held & spare battery) provides USB1.1 host and device ports and supports optional plug-on expansion modules supporting 10/100 BaseT Ethernet or RS232 connections• USB cable supports Active Sync without requiring a docking station• Optional End-Caps supporting RS232, TTL, and IrDACarrying Accessories• Hand-strap, pistol grip with trigger, holster and various protective carrying cases and pouchesApprovals• Safety: - CSA/UL60950-1, IEC 60950-1, EN60950-1•EMC: - FCC Part 15 Class B - EN 55022 - EN 55024
Chapter 7: SpecificationsBattery Specifications246 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual-Bluetooth RadioEmbedded (920 kbps serial interface)Bluetooth Version 1.2 compliant (features Adaptive Frequency Hopping for better co-existence with 802.11 radio) Chip Antenna 2dBi peakTransmit Power -3dBm (0.5mW) minimum, +4dBm (2.5mW) maxFrequency Range 2.400 - 2.4835 GHzRX Sensitivity -80dBm max(BER<=0.1%)Data Rate 732.2 kbps and 57.6 kbps asymmetric, 433.9 kbps symmetric7.3 Battery Specifications7.3.1 High-Capacity (Model WA3006)7.3.1.1 Electrical SpecificationsNote: The electrical specifications apply for ambient temperature TAMB of 0° to +40°C unless otherwise stated.Item Description Specification Remark1 Interface Chipset Maxim DS2762 -2 Rated Voltage 3.7V Typical3 Rated Capacity 3000mAh Typical4 Rated Charge Current 1.5A Maximum5 Charge Voltage 4.2 +/- 0.05V Maximum6 Discharge Cut-off voltage 2.6V Typical7 Discharge Current Constant voltage Current limited -8 Discharge Current 0.5C (-20°C to 60°C) Typical9 Internal Resistance 200 m Maximum
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 247Chapter 7: SpecificationsStandard DischargeBattery Pack Electrical Specifications7.3.1.2 Standard DischargeNote: Standard charge is defined as charging with constant voltage limit of 4.2V and constant current limit of 0.9A; the termination charge occurs when the current drops to 45mA. Standard discharge is defined as discharging at a constant current of 350mA until the battery protection circuit switches the battery output off in over-discharge mode.Acceptance Test SpecificationsDescription SpecificationMinimum Typical MaximumOver voltage detection voltage 4.325V 4.350V 4.375VCharge enable 4.10V 4.15V 4.20VUnder voltage detection voltage 2.5V 2.6V 2.7VOver current detection current - 3.5A -Short-circuit detection current 5.0A 8.0A 11.0AShort-circuit detection voltage 150mV 200mV 250mVOver voltage delay time 0.8s 1s 1.2sUnder voltage delay time 90ms 100ms 110msOver current delay time 5ms 10ms 20msShort-circuit delay time 160µs 200µs 240µsRecovery charge current 0.5mA 1mA 2mADescription Condition StandardOpen circuit voltage After standard charge, measure within 24 hours. 4.15V or moreInternal Resistance After standard charge, measure within 24 hours. 200 m max.Capacity_1 After standard charge, measure time taken for a fast discharge. 110 minutes or moreCharge/Discharge CycleAfter repeating standard charge and fast discharge, measure the fast discharge time after 300 discharge cycles.90 minutes or moreCapacity_2 After standard charge, measure the time taken for a standard discharge. 500 minutes or more
Chapter 7: SpecificationsSafety Data248 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual7.3.1.3 Safety DataOver DischargeAfter standard charge, apply a standard discharge followed by a standby discharge. Then measure capacity after carrying out standard charge and then a fast discharge.110 minutes or moreSelf discharge After a standard charge, keep battery at 25°C for 30 days. Measure the time taken for a fast discharge. 100 mins or moreTemperaturePerform a standard charge and fast discharge at 0°C, 25°C and 40°C and measured the time taken for a fast discharge at 25°C.100 mins. @ 0°C110 mins. @ 23°C105 mins. @ 40°CTemp./Humidity CycleAfter standard charge, carry out 5 cycles of the fol-lowing: 65°C and 90% humidity for 8 hrs.25°C and 65% humidity for 4 hrs.-20°C for 8 hrs. 25°C and 65% humidity for 4 hrs.Following that, perform a fast discharge, standard charge and then a fast discharge. Measure the time taken for the second discharge.100 minutes or moreDry heatAfter standard charge, keep the battery at 60°C for 8 hrs. Carry out a fast discharge, standard charge and then a fast discharge, measured the time taken for the second discharge.100 minutes or moreEMC/CE TestingThe battery will need to pass the requirements of the EMC directive 89/336/EEC (and amendments) when fitted into the product:Emissions to EN55022 Class B (1998) Immunity to EN55024 (1998)Test to be performed by manufacturer.Electro-Static Dis-charge TestEN61000-4-8:A. Contact Discharge: +/-8kV for each contact pad by 10 times.B. Air Discharge: +/-15kV for 10 times (the dis-charge test point is for around battery casing.)No damageDescription Condition Test Condition/ResultShort Circuit Test After a standard charge, short terminals and discharge for 1 hr.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Over Charging TestAfter a standard charge, charge continuously at 4.2V and 4A for 8 hrs.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Description Condition Standard
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 249Chapter 7: SpecificationsSafety License7.3.1.4 Safety License7.3.1.5 Environmental TestReverse Charging TestAfter a standard discharge, reverse-charge continuously at 4.2V and 4A for 8hrs.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Item License Standard1 UL 1642 The lithium-ion cell has been listed and pass the UL1642 stan-dard by UL Lab.2 UL 2054 The battery pack is in the process to apply the UL 2054 battery standard.389/336 EEC-EMC directive.The battery pack is in the process to apply the below standard:-EN55022 -LVD 72/23 EEC -EN55024 -EN613264 RoHS Directive The battery pack is in the process to apply the RoHS directive applicable report by SGS Lab.Description Test Reference Test Condition/ResultDrop (mechanical)Drop sample battery on all faces from height of 1.2 meters onto concrete floor.No explosion, fire, vent, leakage and the open circuit voltage higher than 3.7V.Storage at high temp. EN60068-2-2 Test +60°C dry for 240 hoursNo explosion, fire, vent or leakage.Storage at low temp. EN60068-2-1 Test -20°C dry for 240 hoursNo explosion, fire, vent or leakage.Storage at high temp. and high humidity IEC68-2-3 Test +40°C at 90%RH for 240 hours.No explosion, fire, vent or leakage.Storage temp. cycling IEC68-2-14 Test+60oC (2C) for 1 hour (T1), -20oC (2C) for 1 hour. 3 minutes Max allowed for change between T1 and T2.Cycle 10 timesNo explosion, no fire, no vent, and no leakage.Vibration resistance BS2011 Part 2.1FDC (IEC68-2-37)After standard charge, tested under the following conditions: Random vibration 5Hz-500Hz ASD 0.02g2/Hz in 3 axis for 15 mins. After which, carry out a standard discharge, charge, discharge. No parting joints/cracks or damage to connec-tors. No leakage or critical damage.Description Condition Test Condition/Result
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 251Chapter 7: SpecificationsStandard Discharge7.3.2.2 Standard DischargeNote: Standard charge is defined as charging with constant voltage limit of 4.2V and constant current limit of 0.9A; the termination charge occurs when the current drops to 45mA. Standard discharge is defined as discharging at a constant current of 350mA until the battery protection circuit switches the battery output off in over-discharge mode.Acceptance Test Specifications10 Short-circuit delay time 160µs 200µs 240µs11 Recovery charge current 0.5mA 1mA 2mADescription Condition StandardOpen circuit voltage After standard charge, measure within 24 hours. 4.15V or moreInternal Resistance After standard charge, measure within 24 hours. 150 m max.Capacity_1 After standard charge, measure time taken for a fast discharge. 110 minutes or moreCharge/Discharge CycleAfter repeating standard charge and fast discharge, measure the fast discharge time after 300 discharge cycles.90 minutes or moreCapacity_2 After standard charge, measure the time taken for a standard discharge. 500 minutes or moreOver DischargeAfter standard charge, apply a standard discharge followed by a standby discharge. Then measure capacity after carrying out standard charge and then a fast discharge.110 minutes or moreSelf discharge After a standard charge, keep battery at 25°C for 30 days. Measure the time taken for a fast discharge. 100 mins or moreTemperaturePerform a standard charge and fast discharge at 0°C, 25°C and 40°C and measured the time taken for a fast discharge at 25°C.100 mins. @ 0°C110 mins. @ 23°C105 mins. @ 40°CItem Description Specification
Chapter 7: SpecificationsSafety Data252 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual7.3.2.3 Safety Data7.3.2.4 Safety LicenseTemp./Humidity CycleAfter standard charge, carry out 5 cycles of the fol-lowing: 65°C and 90% humidity for 8 hrs.25°C and 65% humidity for 4 hrs.-20°C for 8 hrs. 25°C and 65% humidity for 4 hrs.Following that, perform a fast discharge, standard charge and then a fast discharge. Measure the time taken for the second discharge.100 minutes or moreDry heatAfter standard charge, keep the battery at 60°C for 8 hrs. Carry out a fast discharge, standard charge and then a fast discharge. Measure the time taken for the second discharge.100 minutes or moreEMC/CE TestingThe battery will need to pass the requirements of the EMC directive 89/336/EEC (and amendments) when fitted into the product:Emissions to EN55022 Class B (1998) Immunity to EN55024 (1998)Test to be performed by manufacturer.Electro-Static Dis-charge TestEN61000-4-8:A. Contact Discharge: +/-8kV for each contact pad by 10 times.B. Air Discharge: +/-15kV for 10 times (the dis-charge test point is for around battery casing.)No damageDescription Condition Test Condition/ResultShort Circuit Test After a standard charge, short terminals and discharge for 1 hr.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Over Charging TestAfter a standard charge, charge continuously at 4.2V and 4A for 8 hrs.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Reverse Charging TestAfter a standard discharge, reverse-charge continuously at 4.2V and 4A for 8hrs.Protection circuit board to operate.No explosion, fire, smoke, or leakage.Item License Standard1 UL 1642 The lithium-ion cell has been listed and pass the UL1642 stan-dard by UL Lab. File No. MH12383Description Condition Standard
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 253Chapter 7: SpecificationsEnvironmental Test7.3.2.5 Environmental Test2 UL 2054 The battery pack is in the process to apply the UL 2054 battery standard. File No. MH29921.389/336 EEC-EMC directiveThe battery pack is in the process to apply the below standard:-EN55022 -LVD 72/23 EEC -EN55024 -EN613264 RoHS Directive The materials of battery pack are used in accordance with the European RoHS directive.Description Test Reference Test Condition/ResultDrop (mechanical)Drop sample battery on all faces from height of 1.2 meters onto concrete floor.No explosion, fire, vent, leakage and the open circuit voltage higher than 3.7V.Storage at high temp. EN60068-2-2 Test +60°C dry for 240 hoursNo explosion, fire, vent or leakage.Storage at low temp. EN60068-2-1 Test -20°C dry for 240 hoursNo explosion, fire, vent or leakage.Storage at high temp. and high humidity IEC68-2-3 Test +40°C at 90%RH for 240 hours.No explosion, fire, vent or leakage.Storage temp. cycling IEC68-2-14 Test+60°C (2C) for 1 hour (T1), -20oC (2C) for 1 hour. 3 minutes Max allowed for change between T1 and T2.Cycle 10 timesNo explosion, no fire, no vent, and no leakage.Vibration resistance BS2011 Part 2.1FDC (IEC68-2-37)After standard charge, tested under the following conditions: Random vibration 5Hz-500Hz ASD 0.02g2/Hz in 3 axis for 15 mins. After which, carry out a standard discharge, charge, discharge. No parting joints/cracks or damage to connec-tors. No leakage or critical damage.Impact shock resis-tance -3 cycles of 50G 11ms, 1/2 sine pulse acceleration applied in 6 directions. 18 shocks total.ESD protection - Accordance with EN61000-4-8Item License Standard
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual A-1APPENDIX APORT PINOUTSA.1 LIF (Low Insertion Force) Port PinoutA.2 Tether Port PinoutPIN # Signal Name1 Ground2 Ground3 USB Host Data Plus, For connecting USB devices4 USB Host Data Minus, For connecting USB Devices5 USB Host Power, for powering USB devices (5V, 100mA Max)6 DC Power in, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)7 DC Power in, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)8 LIF Detect, determines if a device is attached to the LIF9 USB Device Data Minus, for operating the WORKABOUT PRO as a USB device10 USB Device Data Plus, for operating the WORKABOUT PRO as a USB device11 Ground12 GroundPIN # Signal Name1Ground2 USB Data Plus (can be configured as Host or Device)3 USB Data Minus (can be configured as Host or Device)
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual A-3Appendix A: Port PinoutsPositive Female Battery ConnectorA.4 Positive Female Battery Connector
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual C-1APPENDIX CSUMMIT CLIENT UTILITY (SCU) FOR MODEL RA2041This appendix provides details about each tab in the Summit Client Utility (SCU). For quick, step-by-step setup instructions, refer to “Configuring The Summit RA2041 802.11b/g” on page 13.C.1 SCU TabsThis section provides a detailed description of each of the tabs available in the SCU—Main (below), Config (page 2), Global Settings (page 7), Status (page 9), and Diags (page 10).C.1.1 Main TabThe Main tab is displayed when you tap on the Start>Programs>SCU icon.•Enable/Disable Radio: Enables or disables the radio. This is a toggle button; when the radio is enabled, this button reads Disable Radio, and when the radio is disabled, the button reads Enable Radio.•Active Config: Lists the name(s) of the active configuration profile(s) which are referred to as “configs”. When a config is chosen from the Active Config drop-down menu, the settings for that config become active.
Appendix C: Summit Client Utility (SCU) For Model RA2041Config TabC-2 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualIf ThirdPartyConfig is selected, after the WORKABOUT PRO goes through a power cycle, WZC is used for configuration of the radio. See “ThirdPartyConfig” on page 6 for details.•Association Status: Indicates if the radio is associated to an access point. If this is not the case, Association Status indicates the radio status.•Software Version: This field displays the version of the device driver and the SCU that are running on the WORKABOUT PRO.•About Box: This box provides information about the SCU.C.1.2 Config TabThe Config tab allows you to define radio and security settings that are stored in the registry as part of the configuration profile or config. The config you create and save is listed in the Active Config drop-down menu in the Main tab You can define up to 20 configs.•Config: Used to choose the config to be viewed or edited. If ThirdParty-Config is chosen, after the WORKABOUT PRO goes through a power cycle, WZC is used for configuration of the radio.•Rename: Allows you to assign a config name.•Delete: Deletes the config unless it is currently active.•New: Allows you to create a new config with default settings and assign it a name.•Commit: Saves all changes.RadioAttributes
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual C-3Appendix C: Summit Client Utility (SCU) For Model RA2041Config Tab•Radio Attributes: Lists radio attributes. These attributes can be individu-ally chosen from this menu. When an attribute is chosen, an associated list of options is displayed where you can assign new settings or view existing settings.The following table describes the options in the Radio Attributes drop-down menu:Radio Attribute Description Value DefaultConfig Name of config (configura-tion profile). Use Rename button to change name.Maximum of 32 characters. NoneSSID Service set identifier (SSID) for WLAN to which the radio connects.Maximum of 32 characters. NoneClient Name Name assigned to radio & WORKABOUT PRO into which it is installed.Maximum of 16 characters. NonePower Save Power save mode for radio. CAM: Constantly awake.Maximum: Maximum power savings.Fast: Fast power save mode.FastTx Power Maximum transmit power. Max: Maximum defined for current regulatory domain.Measured in mW: 50,30,10, 1.MaxBit Rate Used by radio when interact-ing with WLAN access point.Auto: Rate automatically negotiated with access point.Rates in Mbps: 1, 2, 5.5, 6.9 11, 12, 18, 24, 36, 48, 54.AutoRadio Mode Used by 802.11g when inter-acting with access point.B rates only: 1, 2, 5.5, & 11 Mbps.G rates only: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.BG rates full: All B and G rates.BG rates optimized: 1, 2, 5.5, 6, 11, 24, 36 & 54 Mbps.BG rates opti-mizedAuth Type 802.11 authentication type used when associating with access point.Open, shared-key, or LEAP (Network-EAP).Open
Appendix C: Summit Client Utility (SCU) For Model RA2041Config TabC-4 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual•EAP-Type & Encryption: Security settings. These settings allow you to enhance the security of data across the wireless LAN. Refer to “EAP Cre-dentials” on page 6 and Section below, for details about these settings.SCU Security CapabilitiesThe SCU provides integrated security to protect transmitted data as well as the hand-held and wireless WAN infrastructure that transmit and receive data.A foundational element of the IEEE 802.11i WLAN security standard is IEEE 802.1X and a critical application on a mobile device is an 802.1X supplicant. This supplicant provides an interface between the radio and the operating system and supports the authentication and encryption elements required for 802.11i, also known as Wi-Fi Protected Access 2 (WPA2), as well as predecessors such as WPA and WEP. Summit software includes an integrated supplicant that supports a broad range of security capabilities, including:• 802.1X authentication using pre-shared keys or an EAP type, required for WPA2 and WPA.• Data encryption and decryption using WPA2 AES, WPA TKIP or WEP.Common EAP types include:EAP Type Extensible Authentication Protocol type used for 802.1X authentication to access point.None, LEAP, EAP-FAST, PEAP-MSCHAP– To use EAP-TLS, you mustuse WZC.NoneCredentials Authentication credentials for the selected EAP type.Refer to “EAP Credentials” on page 6.User: Username or Domain/Username (up to 64 characters).Password: up to 64 characters.For PEAP: CA Cert–CA server certificate filename.NoneEncryption Type of encryption used to protect transmitted data.None, Manual WEP, Auto WEP (generated during EAP authentication), WPA PSK, WPA TKIP, WPA2 PSK, WPA2 TKIP, WPA2 AES, CCKM TKIP.For Manual WEP: Up to fourstatic WEP keys.For PSK: ASCII passphrase or hex PSK.NoneRadio Attribute Description Value Default
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual C-5Appendix C: Summit Client Utility (SCU) For Model RA2041Config Tab•EAP-TLS: Uses the same technology as a follow-on to Secure Socket Layer (SSL). It provides strong security, but relies on client certificates for user authentication.•PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic. Two different inner methods are used with PEAP:• EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against Windows Active Directory and domains.• EAP-GTC, resulting in PEAP-GTC: This is for authentication with one-time passwords (OTPs) against OTP databases such as SecureID.•LEAP: Is an authentication method for use with Cisco WLAN access points. LEAP does not require the use of server or client certificates. LEAP supports Windows Active Directory and domains but requires the use of strong passwords to avoid vulnerability to offline dictionary attacks.•EAP-FAST: Is a successor to LEAP and does not require strong passwords to protect against offline dictionary attacks. Like LEAP, EAP-FAST does not require the use of server or client certificates and supports Windows Active Directory and domains.Note: PEAP and EAP-TLS require the use of Windows facilities for the configu-ration of digital certificates.SCU EAP TypesThe following EAP types are supported by the integrated supplicant and can be configured in SCU: PEAP-MSCHAP, PEAP-GTC, LEAP and EAP-FAST. With each of these four types, if authentication credentials are not stored in the config, you will be prompted to enter credentials the first time the radio attempts to associate to an access point that supports 802.1X (EAP). Consider the following when configuring one of the EAP types:• PEAP-GTC: SCU supports static (login) passwords only.• LEAP: Strong passwords are recommended.• EAP-FAST: SCU supports automatic, not manual, PAC provisioning.EAP-TLS will work with a RA2041 radio module when Windows Zero Config (WZC) rather than the SCU is used to configure the type. With WZC, the native Windows supplicant instead of the SCU integrated supplicant is used.
Appendix C: Summit Client Utility (SCU) For Model RA2041Config TabC-6 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualEAP CredentialsKeep the following in mind when defining security settings:• If the credentials specified in the config are incorrect and that config is used, the authentication fails without an error message; you will not be prompted to enter correct credentials.• If the credentials are not specified in the config, when the radio tries to asso-ciate using that config, you will be prompted to enter the credentials.• When prompted, you can enter valid credentials, enter invalid credentials, or cancel the operation.• If you enter valid credentials and tap OK, the radio will associate and authenticate.• If you enter invalid credentials and tap on OK, the radio will associate but will not authenticate; you will be prompted again to enter creden-tials.• If you tap on Cancel or clear the credentials fields and tap on OK, the radio will not attempt to associate with that config until you perform one of the following actions (while the config is the active config):• Cause the WORKABOUT PRO to go through a power cycle or sus-pend/resume.• Disable and enable the radio, or tap the Reconnect button on the Diags windows.• Modify the config, and tap on Commit.Alternatively, you can choose another config as the active config and then switch back to the config for which EAP authentication was cancelled.ThirdPartyConfigIf you choose to configure ThirdPartyConfig, the SCU will work with the operating system’s Windows Zero Config (WZC) to configure radio and security settings for the CF radio installed in the unit.Choosing this config means that WZC must be used to define the following radio and security options: SSID, Auth Type, EAP Type and Encryption.The SCU settings for ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate and Radio Mode. These SCU settings along with SCU global settings and the WZC settings will be applied to the radio module.
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual C-7Appendix C: Summit Client Utility (SCU) For Model RA2041Global Settings TabC.1.3 Global Settings TabThe Global Settings tab allows you to define radio and security settings that apply to all configs (profiles), along with settings that apply specifically to the SCU.The Global Settings in the table below can be edited in the SCU:Global Setting Description Value DefaultCCX features Activates three CCX features: AP-assisted roaming, AP-speci-fied maximum transmit power & radio management.On, Off OffCerts Path Directory where certificates for EAP authentication are stored.Valid directory path up to 64 characters.Dependent on device.Frag Thresh Packet is fragmented when packet size (in bytes) exceeds threshold.Integer from 256 to 2346.2346G Shortslot 802.11g short slot timing mode. Auto, Off, On AutoAdmin Password Password that must be speci-fied when Admin Login button is pressed.A string of up to 64 characters.SUMMITHide Passwords On - SCU as well as EAP authentication dialog boxes hide passwords, WEP keys and other sensitive information.On, Off OffLED Available only with MCF10G. On, Off Off
Appendix C: Summit Client Utility (SCU) For Model RA2041Global Settings TabC-8 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualPreamble Type of radio preamble or head-ers.Auto, Short, Long AutoPing Payload Amount of data to be transmitted on a ping.Bytes: 32, 64, 128, 256, 512 & 102432Ping Timeout ms Amount of time in milliseconds that passes without a response before ping request is consid-ered a failure.Integer from 0 to 30000.5000Ping Delay ms Amount of time in milliseconds between successive ping requests.Integer from 0 to 7200000.1000Roam Delta Amount by which second AP’s RSSI must exceed the moving average RSSI for the current AP before the radio will attempt to roam to a second AP.dBm: 5, 10, 15, 20, 25, 30, 3515Roam Period Following an association or roam scan (with no roam), the number of seconds the radio collects RSSI scan data before considering roaming.Seconds: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 6010Roam Trigger If RSSI from AP is less than roam trigger value, radio per-forms roam scan or probes for an AP with stronger signal.dBm: -50, -55, -60,-65, -70, -75-70RTS Thresh Packet size above which RTS/CTS is required on link.An integer from 0 to 2347.2347RX Diversity Defines how to handle antenna diversity when receiving data from AP.-On-Start on Main: On startup, use main antenna.-On-Start on Aux: On startup, use auxil-iary antenna.-Main only: Use main antenna only.-Aux only: Use aux-iliary antenna only.On-Start on MainGlobal Setting Description Value Default
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual C-9Appendix C: Summit Client Utility (SCU) For Model RA2041Status TabC.1.4 Status TabThe Status tab provides status information including IP address and MAC address for the client radio, IP address and MAC address for the AP, signal strength, channel, transmit power and data rate.TX Diversity Defines how to handle antenna diversity when transmitting data to AP.-Main only: Use main antenna only.-Aux only: Use aux-iliary antenna only.-On: Use diversity.OnWMM Use Wi-Fi Multimedia Exten-sions, also know as WMM.On, Off OffGlobal Setting Description Value Default
Appendix C: Summit Client Utility (SCU) For Model RA2041Diags TabC-10 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualC.1.5 Diags TabUse the Diags tab as a troubleshooting tool. The functions are as follows:•(Re)Connect: Enables/Disables the radio, applies/reapplies current config and tries to associate and authenticate to the wireless LAN, logging all activity in the output area at bottom of the dialog box.•Release/Renew: Obtains a new IP address through DHCP and logs all activity in the output area.•Start Ping: Starts a continuous ping to the address in the text box next to this button. This is a toggle button so when you tap on it, it changes to Stop Ping. Closing this window or tapping on another button also stops the ping.•Diagnostics: Attempts to connect or reconnect to an AP, and provides a more detailed dump of data than if you used (Re)connect. The dump includes the radio state, config settings, global settings and BSSID list of APs. The SCU is saved to a file called _sdc_diag.txt in the Windows directory.Ping AddressPing Results
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual IINDEXAAccepted Start Char 177accessoriescarrying case 212desktop docking station 216Ethernet adaptor cable 219hand strap 209holster, soft shell 212pistol grip 211port replicator 231quad battery charger 223quad docking station 225single battery charger 221vehicle cradle 228Active Conn Tab 116ActiveSyncASync profile 112Adaptive Windowing 193adaptor cableUSB-Ethernet 219Addendum 181, 194, 195, 196Addendum Add-on 2 157, 158, 159, 160, 182Addendum Add-on 5 157, 158, 159, 160, 182Addendum Required 157, 158, 159, 160Addendum Separator 157, 158, 159, 160aiming dot, duration of 137ALT Key 38appearance (display colour scheme) 86Append 156appending to bar codescharacters 145, 200arrow keysmoving the cursor 37ASCIIFull Ascii 176audio indicatorsbeep conditions 43volume adjustment 44Authentication, Bluetooth Controls 113Auto Exposure (Imager) 192Aztec, 2D 198Bbacklightdisplay 85intensity 41keyboard 41backup battery (ML2032) 12backup profile, creating (Total Recall) 124backup profile, restoring (Total Recall) 128Bad Scan Beep 201bar codeappending to 145, 200displaying type of bar code 201parameters 135prefix character 143, 144stripping characters 143, 145suffix character 143, 145symbologiesCodabar 149, 161, 183, 196Code 11 163, 185Code 128 144, 194Code 39 194Code 93 148, 160, 182, 196Discrete 2 of 5 151, 165, 186EAN 13 144, 157, 179, 194EAN 8 145, 158, 180, 195IATA 2 of 5 164Interleaved 2 of 5 150, 163, 185, 196Matrix 2 of 5 164, 186MSI Plessey 149, 162, 184UPC A 145, 158, 180, 195UPC E 146, 159, 181, 195Translation tab 202bar code readerintegrated scanner, operation of 232Barcodes Must Decode 191batteriesa description of 213backup (ML2032) 12
II WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualIndexcapacity dialog box 98charging 11, 34gauge 45installing 33installing main battery 12main battery 11pinouts A-2power saving suspend dialog box 99removing 33run time 47storing 47swap time 33battery chargersafety instructions 214–215battery specifications 246high-capacity (WA3006) 246super high-capacity (WA3010) 250beeperbeep conditions 43volume adjustment 44Bi-Direction Redundancy 139BKSP (DEL Key) 38Bluetooth devices, pairing 49, 111Bluetooth radiochanging device name 116device service profiles 112ISM band 109PINs for devices 113radio configuration 109Bluetooth setup 109GPRS setup 117peripherals 235Bluetooth specs 246BooStconsole (cold reset) 27Bright For (backlight) 86BSP, Bluetooth Controls 117Ccable diagrams A-1calibrating (touchscreen) 41, 103Call Lists 22Call Management 24Captures Per HW Trigger 192case, carrying 212Center Bar Code Only (Imager) 190CH, Bluetooth Controls 113changing password (Start Menu security) 64charactersappending to bar codes 145prefix 143, 144stripping 143, 145suffix 143, 145chargerdescriptions of 34safety instructions 214–215chargers 213desktop docking station 216installing at a site 214operator controls 214quad battery charger (WA3004) 223single battery 221charging (main battery) 11Check Char 155, 161, 162, 164Check Digit 157, 158, 159check digit 150, 163Check Digit, One 150, 163Check Digits (MSI Plessey) 150, 163Check Digit Verification 142, 177, 179, 184, 185, 187Check Digit Verification (Codabar) 183Check Digit Verification (I 2 of 5) 151cleaning hand-held 50Click Data (scanner double-click) 200Click Time (scanner double-click) 200CLSI Editing 149CLSI Library System 183Codabar 149, 161, 183, 196Codabar 149Codablock 170, 189Code 11 163, 185Code 128 194Code 128 144, 156, 178Code 128 Emulation 153, 189Code 16K 169Code 32, Convert To 141Code 32 Prefix 141Code 39 141, 155, 176Code 49 170Code 93 148, 160, 182, 196Code 93 148cold reset 27Cold Reset (Shutdown menu) 71COM, Bluetooth Controls 117Command Prompt 65communicationEthernet connection (desktop dock) 219Ethernet connection (quad dock) 225WORKABOUT to PC 218
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual IIIIndexComposite 152, 167, 197Concatenation 162conference calls, creating 24connection list table, Bluetooth Controls 116Constant Illumination 194Continuous Scan Mode 138, 154, 175, 190control panelaccessing 79basic setup 84Display Properties 84icons 80keyboard properties 87power management properties 98stylus properties 103Conv. UPC-E To UPC-A 147Conv. UPC-E1 To UPC-A 147Convert To Code 32 141Convert To EAN 13 151, 180, 181Convert To UPC -A 181cradle See also Picker cradle 228CTRL Key 38cycle tasks 68DData Matrix, 2D 170, 197Decoded (HHP) parameters 154decoded (internal) scanner parameters 137decoded Intermec (ISCP) parameters 175Decode Performance 142, 144Decode Performance Level 143, 144Decoder Timeout 193DEL (BKSP) Key 38Delete Char Set ECIs 140DemoImager 65Scanner 65Signature 65desktop connection, remote 79desktop docking station (WA4002) 216Device Name, changing 116dialer (phone), using 20Dialer (phone) icon 46dialing, phone number 20, 21dialog box, using 71Diff Read Timeout 176digitcheck digit 150, 163Dim For (backlight) 86Discrete 2 of 5 151, 165, 186Discrete 2 of 5 151, 165dismounting partitions 131displayappearance (colour scheme) 86backlight 85backlight, adjusting 41Display Properties 84Display Properties 84docking device icons 46docking stationuploading data using 48docking stations 213desktop docking station 216installation at site 214operator controls 214quad dock 225Dot Time 137, 191double-clickappending characters to a decodedbar code 200scanner trigger 200Double-Click, Manage Triggers menu 105Double-Tap (stylus settings) 103DSSS, 802.11b/g radio 244DUN service, Bluetooth 112Duration 137EEAN 13 144, 157, 179, 194EAN 8 145, 158, 180, 195EAN-8 Zero Extend 145ECI Decoder 141Enable Bookland (UPC-EAN) 147Enable CC-AB 153Enable CC-C 153Enable Plessy 184Enable RSS Expanded 152, 166, 188Enable RSS Limited 152, 166, 188Enable RSS-14 152, 188Enable TLC-39 153, 168Encryption, Bluetooth Controls 113ESC Key 38EV15 Specs 257EV15 1D imager scanner specs 257FFactory Defaults On Reboot 191Fast Converge (Imager) 192
IV WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualIndexfeatures, WORKABOUT PRO 4Field Size 143Field Size/Chars (bar code scanning) 143FNC1 Conversion 178formattingentire memory card 128partitions 131Full Ascii 176Full ASCII (decoded scanner) 142, 156Function Keysaccessing 38GGood Scan Beep 201GPRS (Bluetooth) 117GSM/GPRS B-1–B-17GSM radio 244GS1-128 178GS1 128 (Composite bar code) 167GS1-128 GS1 US 144GS1-128 Identifier 178GTIN Compliant 178, 182Hhand strap 209headsets, pairing (Bluetooth) 49, 111high-capacity battery pack (WA3006) 246holster, soft shell 212IIATA 2 of 5 164ImagerEV15 specs 257imager (2D) scannerscanning2D 234imager options 232imager parameters 190indicatorsbattery gauge 45dialer, phone 46docking devices 46LED functions 43modifier keys 45onscreen 44phone dialer 46scanner message 234, 235security level 46task bar 59Wireless WAN 46802.11radio signal quality 46Input Panel (control panel) 81integrated scanner option 232Intensity (7035 backlighting) 85Intensity, Keyboard Backlight 88Interleaved 2 of 5 150, 163, 185, 196Internet Explorer 65IP address, assigning (Summit) 14ISBN Conversion 157, 180ISBT Concat Any Pair 179ISBT Concatenation 156ISBT Concat Transmit 178ISBT 128 144, 178ISM band, Bluetooth radio 109Kkeyboardkey repeat 87, 88one shot mode 8936-key keyboard 3958-key 39keyboard backlight 41keyboard keys 36ALT 38arrow keys 37BKSP 38CTRL 38DEL 38ESC 38macro keys 39, 90modifiers 36navigating using the keyboard 55one shot mode 89SCAN 38SHIFT 37SPACE 37TAB 38Keyboard Properties 87, 88backlight 88one shot mode 89Key Repeat tab 87keysalpha keys, 36-key keyboard 39LLANAccessUsingPPP service, Bluetooth 112Laser On Time 138, 154, 175LEDfunctions 43Length Mode 183, 186, 187
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual VIndexLIF (Low Insert Force) port pinout A-1Linear Decode 148Linear Security Level 138Low Power Timeout 138, 155, 176L1, Set Length 142L2, Set Length 142MMacro keysaccessing 39executing a macro 91Macros menu, accessing 90recording and saving 90maintenance (of hand-held) 50Manage Triggers 104Matrix 2 of 5 164, 186Max Gain (Imager) 193Max Illumination (Imager) 193Maximum Length 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174Max Integration (Imager) 193Max Number Barcodes 190memory cardcreating partitions 129formatting entire 128formatting partition 131messagesScan Indicator 201scanner warning message 201Scan Result 201Micro PDF-417 153, 169, 189, 197Minimum Cancel Time 138, 154, 175Minimum Length 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 177, 179, 182, 184, 185, 186, 188Min Scan Duration 192modem using VPN clients B-7modifier keys 36locking 37One Shot Mode 89unlocking 37mounting partitions 132MSI Plessey 149, 162, 184Nname servers, assigning (Summit) 16NOTIS Editing 149NQuerty Retry, Bluetooth Controls 117OOff & On buttons 35On & Off button 12, 35One Check Digit 150, 163one dimensional internal scanner 233One Shot Mode 89ON For 88Output (Telepen) 165Ppairing Bluetooth devices 49, 111Parameter Scanning 138, 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 176, 177, 178, 179, 182, 184, 185, 186, 188partitionscreating 129deleting 131dismounting 131formatting 131management 131mounting 132PC, connecting WORKABOUT to 218PDF internal scannerscanningPDF internal 234PDF-417 153, 168, 188, 197Pharmaceutical 156phone, dialing 20Phonebook 24Phone Dialer icon 46phone number, dialing 20, 21picker cradleinstalling cable 229PIN, Bluetooth Controls 112pinouts A-1PINs, Bluetooth devices 113pistol grip 211Plessey Maximum Length 163Plessey Minimum Length 163Plessy Transmit Check Digit 184port pinouts A-1Port Prefix, Bluetooth Controls 117port replicator 231portsLIF (Low Insertion Force) A-1tether A-1PosiCode 167Postal
VI WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualIndexAustralian 173Canadian 173China 173Japanese 173Kix 174Korean 174PlaNET 172, 198PostNET 172, 198Royal 174, 199powering up 12Power Management Properties 98battery capacity 98suspend, power saving 99Power Source 99Prefix 140Prefix Char 143, 144Printer (serial service), Bluetooth 112profile, creating backup 124profile, restoring backup 128ProgramsCommand Prompt 65Internet Explorer 65Remote Desktop Connection 65Windows Explorer 65protective case 212punctuation marks, accessing (SHIFT Key) 37Qquad battery charger 223quad dock (WA4204-G2) 225RradioBluetooth 109Bluetooth specs 246GSM/SPRS/EDGE 244IP address (Summit), assigning 14name servers (Summit) 16RA2041 radio specifications 244RA3030-G2 GSM radio specifications 244specifications 244802.11b/g Direct Sequence SS 244802.11signal quality 46radio specifications 244Raster Expand Rate (2D) 140Raster Height (2D) 140RA2041 radio specifications 244RA3030-G2 GSM radio specifications 244Reading Range 177, 179, 182, 185recalibrating (touchscreen) 41, 103remote connect 79Remote Desktop Connection 65Repeat Delay (between key repeats) 88Repeat Rate (of key repeats) 88Repeat tab (key repeat settings) 87resetting the WORKABOUT PROBooSt menu, accessing 27warm reset 26RSS Code 152, 166, 188, 196Run (Start Menu) 70Ssafety instructionsbattery charger 214–215scanner 232safety warning, scanner 232Same Read Timeout 176Same Read Validate 176Scan Data Format 140Scan Indicator 201SCAN Key 38Scan Log File 201scannerBi-Direction Redundancy 139CLSI Editing 149Codabar 149Code 39 141Continuous Scan Mode 138Conv. UPC-E To UPC-A 147Conv. UPC-E1 To UPC-A 147decoded (internal) 137decoded Intermec (ISCP) 175EAN-8 Zero Extend 145Enable Bookland 147imager 190Laser On Time 175Linear Security Level 138Low Power Timeout 138Minimum Cancel Time 138NOTIS Editing 149one dimensional (1D) internal scanner 233Parameter Scanning 138PDF internal scanner dimensional (1D) 234safety warnings 232Security Level 148Supp. Redundancy 147Supplementals 147techniques (scanning) 232
WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual VIIIndextroubleshooting tips 233two dimensional (2D) imager scanner 234UPC-A Check Digit 145UPC-A Preamble 146UPC-EANI 147UPC-E Check Digit 146UPC-E Preamble 146UPC-E1 Check Digit 146UPC-E1 Preamble 1462D UPC Half Block Stitching 148scanner module (SE 955)specs 254scanner options 232scanningaiming (target) dot duration 137appending characters 145, 200Bad Scan Beep 201check digit 150, 163Check Digits (MSI Plessey) 150, 163Check Digit Verification 142Check Digit Verification (I 2 of 5) 151Click Data (appending data) 200Click Time 200Code 128 144, 156, 178Code 128 Emulation 153Code 32 Prefix 141Code 39 155, 176Code 93 148Composite 152Convert To Code 32 141Convert To EAN 13 151Decoded (HHP) 154Decode Perf. Level 143, 144Decode Performance 142, 144Delete Char Set ECIs 140Discrete 2 of 5 151Dot Time 137double-click 200ECI Decoder 141Enable CC-AB 153Enable CC-C 153Enable RSS Expanded 152Enable RSS Limited 152Enable RSS-14 152Enable TLC-39 153, 168Full ASCII 142, 156Good Scan Beep 201Laser On Time 138, 154Linear Decode 148Micro PDF-417 153PDF-417 153PostalPlaNET 198PostNET 198Royal 199Prefix 140prefix character 143, 144removing characters 143, 145RSS Code 152safety instructions 232Scan Data Format 140Scan Indicator 201Scan Log File 201Scan Result 201Scan Result Time 201Set Length L1 142Set Length L2 142specifications 254specifications, imager 258Suffix 140suffix character 143, 145symbologies 135target (aiming) dot duration 137Translations tab 202Transmit Check Digit 142Transmit Check Digit (I 2 of 5) 151Transmit Check Digit (MSI Plessey) 150Transmit Code 1D Char 140Trioptic Code 39 156Trioptic Code 39, Enable 141UPC-EAN Shared Settings 160, 1811D internal 2332D Maxicode 1982D QR Code 197Scanning Mode (2D) 139Scan Result 201Scan Result Time 201screenstylus, using to navigate 55touch pen, using 55Windows CE, navigating 55SCU (Summit Client Utility) 14, C-1Config Tab C-2configuring 17Diags (Diagnostics) Tab C-10EAP Credentials C-6EAP Types C-4, C-5Global Settings Tab C-7IP, assigning 14Main Tab 17, C-1security C-4Status Tab C-9
VIII WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User ManualIndexThirdPartyConfig C-6Windows Zero Config (WZC) C-6WLAN, connecting to 14SD/MMC Card, inserting 49Security Level 148security level icon 46Security Settings 63changing password 64configuring taskbar 64level 63Supervisor 63Teklogix 63User 63Servers, Bluetooth Controls 114Services 23Services, Bluetooth Controls 112Set Length L1 142Set Length L2 142Set PIN, Bluetooth Controls 113SettingsControl Panel 69Network and Dial-up connections 69Run 69Taskbar and Start Menu 69SE 955 scanner specs 254SHIFT Key 37ShutdownCold Reset 71Suspend 70Warm Reset 71Shutdown (Start Menu) 70signal quality, 802.11 46SIM card, inserting 49single battery charger (WA3001) 221SIP (Soft Input Panel 81Sled See vehicle cradle. 228SMS Configuration B-16Soft Input Panel (SIP) 81Soft Scan Timeout 201SPACE Key 37specificationsSE 955 scanner 254Start/Stop Transmit 161, 177, 183Start Menu 62cycle tasks 68desktop 63programs 65Run 70Security 63Settings 69Shutdown 70system tray 67task manager 68Strip Leading 143, 145Strip Start/Stop Chars 155Strip Trailing 143, 145stylus (touch pen), using 55Stylus Properties 103Double-tap (stylus sensitivity) 103Suffix 140Suffix Char 143, 145Summit Client Utility (SCU) 14, C-1super high-capacity battery pack (WA3010) 250Supervisor security level 63Supp. Redundancy (Code 128) 147Supplementals (UPC-EAN) 147Suspend (Shutdown menu) 70Suspend Timeout 99swap time (for battery) 33symbologies, bar code 135system tray 67TTAB Key 38target dot, duration of 137taskbarcustomizing 60onscreen indicatorsbattery gauge 45dialer, phone 46docking devices 46modifier keys 45phone dialer 46security level 46Wireless WAN 46802.11 radio signal quality 46using 59task manager 68Teklogix security level 63TekTerm application 79Telepe n 165, 187tether port pinout A-1text conventions 4TLC-39 168Total Recallbackup profile, creating 124backup profile, restoring 128touch pen, using 55

Navigation menu