Contents
- 1. ANTENNA CO LOCATION WARNING
- 2. FCC STATEMENT INFO TO USERS
- 3. LETTER OF PHOTO
- 4. USERS MANUAL 1
- 5. USERS MANUAL 2
- 6. USERS MANUAL 3
ANTENNA CO LOCATION WARNING
Teklogix 9150 Wireless Gateway User Manual 17
Chapter 2: Installation Requirements
Power And Antenna Cables
2.1.3 Power And Antenna Cables
2.1.3.1 Power
To prevent accidental disconnection and stress on the 9150, antenna and power
cables should be secured within 30 cm of the unit. Secure the cables with ties to
the cable tie mounts on the 9150 (see Figur e2.1 on page 16). A single phase power
outlet (range 100 to 240 VAC rated 1.0A minimum) should be installed within one
metre (3.1 feet) of the 9150. The 9150 automatically adjusts to input within that
power range. The power cable is removable and is available in the power type spe-
cific to your location.
To eliminate the need for AC wiring, the 9150DC Wireless Gateway is powered
over its Ethernet connection. For detailed information, please see page 20.
Warning: To avoid electric shock, the power cord protective grounding
conductor must always be connected to ground.
2.1.3.2 Antennas
Warning: This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Warning: Equipment requires professional installation of antennas.
The maximum output power from the radio transmitter is 36 mW