103132 2 Weg Variable Frequency Drive Users Manual CFW 09_V3_7X_E11_0899_5306 User

• Summary
• QUICK PARAMETER REFERENCE, FAULT AND STATUS MESSAGES
• SAFETY NOTICES
  • 1.1 SAFETY NOTICES IN THE MANUAL
  • 1.2 SAFETY NOTICES ON THE PRODUCT
  • 1.3 PRELIMINARY RECOMMENDATIONS
• GENERAL INFORMATION
  • 2.1 ABOUT THIS MANUAL
  • 2.2 SOFTWARE VERSION
  • 2.3 ABOUT THE CFW-09
  • 2.4 CFW-09 IDENTIFICATION LABEL AND CODE NUMBER
  • 2.5 RECEIVING AND STORAGE
• INSTALLATION
  • 3.1 MECHANICAL INSTALLATION
  • 3.2 ELECTRICAL INSTALLATION
  • 3.3 European EMC Directive - Requirements for Conforming Installations
• KEYPAD (HMI) OPERATION
  • 4.1 DESCRIPTION OF THE KEYPAD
  • 4.2 USE OF THE KEYPAD (HMI)
• START-UP
  • 5.1 PRE-POWER CHECKS
  • 5.2 INITIAL POWER-UP
  • 5.3 START-UP
• DETAILED PARAMETER DESCRIPTION
  • 6.1 ACCESS AND READ ONLY PARAMETERS - P000 to P099
  • 6.2 REGULATION PARAMETERS - P100 to P199
  • 6.3 CONFIGURATION PARAMETERS - P200 to P399
  • 6.4 MOTOR PARAMETERS - P400 to P499
  • 6.5 SPECIAL FUNCTIONS PARAMETERS - P500 to P699
• DIAGNOSTICS AND TROUBLESHOOTING
  • 7.1 FAULTS AND POSSIBLE CAUSES
  • 7.2 TROUBLESHOOTING
  • 7.3 CONTACTING WEG
  • 7.4 PREVENTIVE MAINTENANCE
  • 7.5 SPARE PART LIST
• CFW-09 OPTIONS AND ACCESSORIES
  • 8.1 I/O EXPANSION BOARDS
  • 8.2 INCREMENTAL ENCODER
  • 8.3 KEYPAD WITH LED´s ONLY
  • 8.4 REMOTE KEYPAD AND CABLES
  • 8.5 BLANK COVERS
  • 8.6 RS-232 PC COMMUNICATION KIT
  • 8.7 LINE REACTOR / DC BUS CHOKE
  • 8.8 LOAD REACTOR
  • 8.9 RFI FILTER
  • 8.10 DYNAMIC BRAKING
  • 8.11 THROUGH SURFACE MOUNTING KIT
  • 8.12 FIELDBUS
  • 8.13 SERIAL COMMUNICATION
  • 8.14 MODBUS-RTU
  • 8.15 KIT KME (for Extractable Mounting)
  • 8.16 CFW-09 SHARK NEMA 4X
  • 8.17 CFW-09 SUPPLIED BY THE DC LINK–LINE HD
  • 8.18 CFW-09 RB REGENERATIVE CONVERTER
  • 8.19 PLC BOARD
• TECHNICAL SPECIFICATIONS
  • 9.1 POWER DATA
  • 9.2 ELECTRONICS/GENERAL DATA
  • 9.3 OPTIONAL DEVICES
  • 9.4 MECHANICAL DATA