536722 2 Zoeller E820, I820, Wd820, Wh820 Repair Parts Fm1531 820 List User Manual
536723 2 Zoeller E820, I820, Wd820, Wh820 Repair Parts 536723_2_Zoeller E820, I820, WD820, WH820 Repair Parts 536723_2_Zoeller E820, I820, WD820, WH820 Repair Parts pdf pumpproducts
User Manual: Pump 536722 2 Zoeller E820, I820, Wd820, Wh820 Repair Parts
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
SECTION: 6.10.403 FM1531 1207 Supersedes 0906 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. visit our web site: www.zoeller.com MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 REPLACEMENT PARTS LIST FOR GRINDER MODELS: E820 NONAUTOMATIC 230V 1PH I820 NONAUTOMATIC 200V 1PH WD820 AUTOMATIC w/wired float switch 230V 1PH WH820 AUTOMATIC w/wired float switch 200V 1PH Consult factory for all other models TO ORDER REPLACEMENT PARTS: PLEASE FURNISH THE FOLLOWING INFORMATION: • Model Number. • Part Number of Pump. • Part Number and Description of part. NOTE: NEW WIRING FOR OLDER REVISION PUMPS. REWIRE PUMP JUNCTION BOX CHAMBER (TOP CAP) PER APPROPRIATE WIRING DIAGRAM BELOW. L1 L2 L2 L1 WHITE WHITE START CAPACITOR GREEN START CAPACITOR GREEN BLACK BLACK BLACK WHITE 2 1 R 5 BLACK BLACK BLACK 2 WHITE WHITE BLACK RELAY 1 R RUN CAPACITOR 5 RELAY RUN CAPACITOR FLOAT BLUE (1) RED (2) YELLOW (3) BLUE (1) RED (2) YELLOW (3) BLUE (WHITE) RED (BROWN) YELLOW (BLACK) BLUE (WHITE) RED (BROWN) YELLOW (BLACK) MOTOR MOTOR O.L. O.L. START START RUN RUN WIRING DIAGRAM FOR MODELS “E820” All Revisions and “I820” All Revisions 9/96 thru Current 010443 © Copyright 2007 Zoeller Co. All rights reserved. 010415 WIRING DIAGRAM FOR MODELS “WD820” All Revisions and “WH820” All Revisions 9/96 thru Current REPLACEMENT PARTS LIST FOR MODELS “E820” and “I820”. MODELS: REF NO. See back page for illustration. E820-A E820-B E820-C E820-D I820-A I820-B I820-C I820-D NOTES 9/96 thru 12/97 1/98 thru 8/02 9/02 thru 4/06 5/06 thru Current 9/96 thru 12/97 1/98 thru 8/02 9/02 thru 4/06 5/06 thru Current DESCRIPTION QTY HANDLE 1 217069 217069 217069 217069 217069 217069 217069 217069 2 COVER & CORD 200/230V/1PH/NONAUTO/”820” 1 3 010836 010836 015608 015608 010838 010838 015609 015609 3 COVER-MACH & HANDLE ASM 1 3 010835 010835 015612 015612 010835 010835 015612 015612 4 SWITCH,FLT-TERM & SEAL “820” 0 N/A N/A N/A N/A N/A N/A N/A N/A 5 SEAL,CORD-FLOAT SWITCH 0 N/A N/A N/A N/A N/A N/A N/A N/A 1 • 6 CORD TERM&SEAL 1 3 010840 010840 015614 015614 010841 010841 015615 015615 7 • SEAL,CORD-ASM&STR RLF 1 3 004375 004375 015634 015634 004375 004375 015634 015634 8 • GASKET,CASE/COVER 1 001011 001011 001011 001011 001011 001011 001011 001011 9 • WIRE PKG (6 WIRES) 1 010833 010833 010833 010833 010833 010833 010833 010833 10 CAPACITOR-START & CLAMP ASM. 1 010829 010829 010829 010829 010829 010829 010829 010829 11 CAPACITOR-RUN & CLAMP ASM 1 010830 010830 010830 010830 010830 010830 010830 010830 12 RELAY,VOLTAGE SENSING 1 010410 014601 014601 014601 010410 014601 014601 014601 13 • PLUG,TEST 2 015023 015023 015023 015023 015023 015023 015023 015023 14 • SEAL,THRU WALL TERM 3 003402 003402 003402 003402 003402 003402 003402 003402 HOUSING,MTR-&STR 1 010444 010444 010444 018231 010449 010449 010449 018232 001012 001012 001012 N/A 001012 001012 001012 N/A 006703 15 16 BEARING,SLEEVE-BRONZE OILITE • 1 BEARING,6201 4 N/A N/A N/A 006703 N/A N/A N/A 17 KEY 1 007775 011711 011711 011711 007775 011711 011711 011711 18 ROTOR & BRG ASM/1PH “820” 1 010831 010831 010831 018230 010831 010831 010831 018230 009861 19 • BEARING,7303 1 009861 009861 009861 009861 009861 009861 009861 20 • SEAL,MTR HSG 1 001014 001014 001014 001014 001014 001014 001014 001014 21 • OIL,DIELECTRIC 1 010839 010839 010839 018233 010839 010839 010839 018233 ADAPTER-MACH 1 001003 001003 001003 001003 001003 001003 001003 001003 • SEAL,SHAFT 1 002430 002430 002430 002430 002430 002430 002430 002430 24 WASHER,SUPPORT-SS 1 010863 010863 010863 010863 010863 010863 010863 010863 25 COLLAR,SHAFT 1 010409 010409 010409 010409 010409 010409 010409 010409 26 IMPELLER-MACH “820” 1 010402 010402 010402 010402 010402 010402 010402 010402 27 HOUSING,PUMP-MACH “820” 1 010400 010400 010400 010400 010400 010400 010400 010400 28 CUTTER & DISC ASM./“820” 1 010832 010832 010832 010832 010832 010832 010832 010832 29 SHIM SET FOR 820/840 GRINDERS 1 012632 012632 012632 012632 012632 012632 012632 012632 30 WASHER,RETAINING 1 008533 008533 008533 008533 008533 008533 008533 008533 31 GUARD,CUTTER-PLASTIC 1 008528 008528 008528 008528 008528 008528 008528 008528 22 23 32 CONNECTOR,WIRENUT 14-16GA 0 N/A N/A N/A N/A N/A N/A N/A N/A 33 • SCREW,.25-20X.75” SH CAP SS. 3 007768 007768 007768 007768 007768 007768 007768 007768 34 • SCREW,.25-20 X .75LG HH SS (NYLOCK) 1 009545 009545 009545 009545 009545 009545 009545 009545 35 • SCREW,#10-24X.875-FLT SH CAP SS. 3 007761 007761 007761 007761 007761 007761 007761 007761 36 • SCREW,.313-18 X 1” HH CAP-SS 4 002608 002608 002608 002608 002608 002608 002608 002608 37 • SCREW,.25-20X1” HHM-S.S. 4 007790 007790 007790 007790 007790 007790 007790 007790 38 • SCREW,.25-20X.75 HHM-SS/INDENTED/UNSLOTTED 4 001916 001916 001916 001916 001916 001916 001916 001916 39 • SCREW,#6-32X.25RHM SL TC STLGR 5 001877 001877 001877 001877 001877 001877 001877 001877 40 • SPRING,BEARING PRELOAD 1 N/A N/A N/A 017192 N/A N/A N/A 017192 41 • WASHER,FLAT-SS .25 STANDARD 3 004480 004480 004480 004480 004480 004480 004480 004480 42 • SCREW,#6-32X.375RHM SL TC ZINC PLATED 1 019421 019421 019421 019421 019421 019421 019421 019421 REBUILD KIT E & I “820/.820” 1 010844 010844 015804 018234 010844 010844 015804 018234 ¤ • Items included in Rebuild Kit. ¤ Not Shown in Illustration. NOTES: 1) See FM1267 Price Sheet for listing of parts prices. 2) “N/A” indicates, not applicable. 3) If an “X” follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. 4) Housing, MTR & Stator (Item 15) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 13) and Seal, thru Wall Term. (Item 14) and Bearing (Item 16) are replaceable. © Copyright 2007 Zoeller Co. All rights reserved. REPLACEMENT PARTS LIST FOR MODELS “WD820” and “WH820”. MODELS: REF NO. 1 DESCRIPTION • QTY NOTES See back page for illustration. WD820-A WD820-B WD820-C WD820-D WH820-A WH820-B WH820-C WH820-D WH820-E 9/96 thru 12/97 1/98 thru 8/02 9/02 thru 4/06 5/06 thru Current 9/96 thru 12/97 1/98 thru 10/98 11/98 thru 8/02 9/02 thru 4/06 5/06 thru Current 217069 HANDLE 1 217069 217069 217069 217069 217069 217069 217069 217069 2 COVER,CORD & FLT 1 010825 010825 015610 015610 010837 010837 010837 015611 015611 3 COVER-MACH & HANDLE ASM 1 3 010826 010826 015613 015613 010826 010826 010826 015613 015613 3 010827 010827 010827 010827 010827 010827 011880 011880 011880 011065 011065 011065 011065 011065 011065 011071 011071 011071 4 SWITCH,FLT-TERM & SEAL “820” 1 • SEAL,CORD-FLOAT SWITCH 1 CORD TERM & SEAL 1 3 010828 010828 015632 015632 010842 010842 010842 015633 015633 7 • SEAL,CORD-ASM&STR RLF 1 3 004375 004375 015634 015634 004375 004375 004375 015634 015634 8 • GASKET,CASE/COVER 1 001011 001011 001011 001011 001011 001011 001011 001011 001011 9 • WIRE PKG (6 WIRES) 1 010833 010833 010833 010833 010833 010833 010833 010833 010833 5 6 10 CAPACITOR-START & CLAMP ASM. 1 010829 010829 010829 010829 010829 010829 010829 010829 010829 11 CAPACITOR-RUN & CLAMP ASM 1 010830 010830 010830 010830 010830 010830 010830 010830 010830 12 RELAY,VOLTAGE SENSING 1 010410 014601 014601 014601 010410 010410 014601 014601 014601 13 • PLUG,TEST 2 015023 015023 015023 015023 015023 015023 015023 015023 015023 14 • SEAL,THRU WALL TERM 3 HOUSING,MTR-&STR 1 15 16 BEARING,SLEEVE-BRONZE OILITE • BEARING,6201 1 4 003402 003402 003402 003402 003402 003402 003402 003402 003402 010444 010444 010444 018231 010449 010449 010449 010449 018232 001012 001012 001012 N/A 001012 001012 001012 001012 N/A N/A N/A N/A 006703 N/A N/A N/A N/A 006703 17 KEY 1 007775 011711 011711 011711 007775 011711 011711 011711 011711 18 ROTOR & BRG ASM/1PH “820” 1 010831 010831 010831 018230 010831 010831 010831 010831 018230 009861 19 • BEARING,7303 1 009861 009861 009861 009861 009861 009861 009861 009861 20 • SEAL,MTR HSG 1 001014 001014 001014 001014 001014 001014 001014 001014 001014 21 • OIL,DIELECTRIC 1 010839 010839 010839 018233 010839 010839 010839 010839 018233 ADAPTER-MACH 1 001003 001003 001003 001003 001003 001003 001003 001003 001003 • SEAL,SHAFT 1 002430 002430 002430 002430 002430 002430 002430 002430 002430 24 WASHER,SUPPORT-SS 1 010863 010863 010863 010863 010863 010863 010863 010863 010863 25 COLLAR,SHAFT 1 010409 010409 010409 010409 010409 010409 010409 010409 010409 26 IMPELLER-MACH “820” 1 010402 010402 010402 010402 010402 010402 010402 010402 010402 27 HOUSING,PUMP-MACH “820” 1 010400 010400 010400 010400 010400 010400 010400 010400 010400 28 CUTTER & DISC ASM./”820” 1 010832 010832 010832 010832 010832 010832 010832 010832 010832 29 SHIM SET FOR 820/840 GRINDERS 1 012632 012632 012632 012632 012632 012632 012632 012632 012632 30 WASHER,RETAINING 1 008533 008533 008533 008533 008533 008533 008533 008533 008533 31 GUARD,CUTTER-PLASTIC 1 008528 008528 008528 008528 008528 008528 008528 008528 008528 22 23 32 • CONNECTOR,WIRENUT 14-16GA 1 003753 003753 003753 003753 003753 003753 003753 003753 003753 33 • SCREW,.25-20X.75”SH CAP SS. 3 007768 007768 007768 007768 007768 007768 007768 007768 007768 34 • SCREW,.25-20 X .75LG HH SS (NYLOCK) 1 009545 009545 009545 009545 009545 009545 009545 009545 009545 35 • SCREW,#10-24X.875-FLT SH CAP SS. 3 007761 007761 007761 007761 007761 007761 007761 007761 007761 36 • SCREW,.313-18 X 1”HH CAP-SS 4 002608 002608 002608 002608 002608 002608 002608 002608 002608 37 • SCREW,.25-20X1” HHM-S.S. 4 007790 007790 007790 007790 007790 007790 007790 007790 007790 38 • SCREW,.25-20X.75 HHM-SS/ INDENTED/UNSLOTTED 4 001916 001916 001916 001916 001916 001916 001916 001916 001916 39 • SCREW,#6-32X.25RHM SL TC STLGR 5 001877 001877 001877 001877 001877 001877 001877 001877 001877 40 • SPRING,BEARING PRELOAD 1 N/A N/A N/A 017192 N/A N/A N/A N/A 017192 41 • WASHER,FLAT-SS .25 STANDARD 3 004480 004480 004480 004480 004480 004480 004480 004480 004480 42 • SCREW,#6-32X.375RHM SL TC ZINC PLATED 1 019421 019421 019421 019421 019421 019421 019421 019421 019421 REBUILD KIT WD & WH “820/6820” 1 010843 010843 015803 018234 010843 010843 010843 015803 018234 ¤ • Items included in Rebuild Kit. ¤ Not Shown in Illustration. NOTES: 1) See FM1267 Price Sheet for listing of parts prices. 2) “N/A” indicates, not applicable. 3) If an “X” follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering of this part. 4) Housing, MTR & Stator (Item 15) is preassembled at factory and must be replaced as a unit. Stator is permanently attached to the Motor Housing. Plug (Item 13) and Seal, thru Wall Term. (Item 14) and Bearing (Item 16) are replaceable. © Copyright 2007 Zoeller Co. All rights reserved. REPLACEMENT PARTS ILLUSTRATION FOR 820 - ALL MODELS 5 3 6 4 40 16 16 1 32 7 17 39 38 8 9 2 18 19 19 36 20 21 22 23 10 39 11 24 26 42 12 25 13 39 27 14 37 15 18 29 28 30 41 34 33 31 35 SK1642 © Copyright 2007 Zoeller Co. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:12:10 09:49:38-05:00 Creator Tool : Windows NT 4.0 Modify Date : 2007:12:10 09:51:42-05:00 Metadata Date : 2007:12:10 09:51:42-05:00 Format : application/pdf Title : fm1531-820 Parts List Description : FM1531 Creator : mikem Document ID : uuid:b47de454-71fb-4642-9608-da1e1a3f8219 Instance ID : uuid:2816f874-8df2-4a73-b6b3-cd1574539fef Page Count : 4 Subject : FM1531 Author : mikemEXIF Metadata provided by EXIF.tools