QUANSHENG ELECTRONICS TG-45UV Two Way Radio User Manual

Fujian Nanan Quansheng Electronics Co., Ltd. Two Way Radio

user manual

Download: QUANSHENG ELECTRONICS TG-45UV Two Way Radio User Manual
Mirror Download [FCC.gov]QUANSHENG ELECTRONICS TG-45UV Two Way Radio User Manual
Document ID2485801
Application IDpZXYtINb04pTebsb5pOcYg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize369.73kB (4621581 bits)
Date Submitted2014-12-29 00:00:00
Date Available2014-12-29 00:00:00
Creation Date2014-12-22 13:57:09
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2014-12-22 14:14:00
Document TitleTG-45UV鑻辨枃璇存槑涔? 20140403

USER'S MANUAL
Two way radio
TG-45UV
FCC ID:XBPTG-45UV
PRECAUTIONS BEFORE USING
Please read the User's Manual before using. It gives you important information about how
to operate the portable radio.
Thank you for purchasing this Radio.
We believe this easy-to-use radio will provide reliable and
dependable communication.
QS Radio incorporates the latest advanced technology.
As a result, we know that you will be pleased with the quality
and features of this product.
Please put the radio and accessories where the children can not touch.
Maintenance can only be performed by professional technicians.
Please use the standard battery pack and charger in order not to destroy the radio.
Please use the standard antenna,in order not to shorten the distance.
Do not expose the radio to sunlight for a long period of time, nor put it near the heat, nor
use it in a high temperature environment.
Do not put it in extreme dust nor wet or on unsteady surfaces.
Keep it dry. (Rain or moisture will erode the electronic board).
Do not transmit when the antenna is not installed.
If you find bad smell or smog,please turn off the radio immediately.And take the battery off
the radio,then contact with QS agent.
45UV
FEATURES
CONTENTS
UHF/VHF dual band receive/transmit
Frequency deviation and offset direction
FM radio (65-108MHz)
setting
Large LCD display
Multi step frequency
High capacity Li-ion battery and smart charger
Busy channel lock
SUPPLIED ACCESSORIES
01
PC programmable
Time-out-timer(TOT)
READY TO WORK
02
Fast MENU operation
Multi display mode: channel/channel-frequency/
Emergency alarm function
channel name
Squelch level adjustable
Multi scan function selective
CHARGING NOTES (1)
02
CHARGING NOTES (2)
03
INSTALLING ANTENNA
04
Multi power saving function
Channel scan additive
Voice prompt(Chinese or English)
Main/Sub channel shift
INSTALLING BELT CLIP
04
Reminding switch
1750Hz call tone
INSTALLING EXTERNAL SPEAKER/MICROPHONE
05
Dual display of frequency and channel
Reminding of repeater transfer
Channel name edit
Auto-keylock
Channel storing
128 channels
Frequency/Channel mode shift
Channel delete function
Multi LCD backlight selective
Reset
Time of backlight auto off selective
DTMF function
LCD ICON EXPLANATION
VOX function
PTT-ID
SHORTCUT KEYS
Dual-watch operation
CTCSS/DCS
Receive/Transmit code setting separately
Reverse function
Cable clone
Stun/Kill/Revive
CTCSS/DCS code search automatically
Single call/Group call/Troop call
ATTACHING THE BATTERY PACK
06-07
DIAGRAM
08
BASIC OPERATION
09
LCD DISPLAY
MENU FUNCTIONS
FAST MENU OPERATION FLOW
FUNCTION OPERATION AND DESCRIPTION
SQUELCH LEVEL（SQL）
09
09
10-12
13
14-22
23
23
CONTENTS
CONTENTS
STEP FREQUENCY(STEP)
23
SCAN RESUMED MODE
32
OUTPUT POWER (TXP)
24
PTT ID（PTT-ID）
32
BATTERY SAVING (SAVE)
24
PTT ID PROLONG TIME（PTT-LT）
33
VOX FUNCTION (VOX)
25
A CHANNEL DISPLAY MODE（MDF-A）
33
AUTO BACKLIGHT （ABR)
26
B ChANNEL DISPLAY MODE（MDF-B）
34
DUAL-WATCH OPERATION (TDR)
26
BUSY CHANNEL LOCK（BCL）
34
KEYPAD SOUND REMINGDING (BEEP)
27
AUTO KEYPAD LOCK（AUTOLK）
35
TIME-OUT-TIMER (TOT)
27
FREQUENCY OFFSET DIRECTION SETTING（SFT-D）
35
RECEIVING DCS (R-DCS)
28
FREQUENCY DEVIATION（OFFSET）
36
RECEIVING CTCSS (R-CTCS)
28
CHANNEL STORE （MEM-CH）
TRANSMITTING DCS (T-DCS)
29
CHANNEL DELETE（DEL-CH）
38
TRANSMITTING CTCSS (T-CTCS)
29
STANDBY BACKLIGHT（WT-LED）
38
VOICE REMINDING (VOICE)
30
RX BACKLIGHT（RX-LED）
39
ANI-ID (ANI-ID)
30
TX BACKLIGHT（TX-LED）
39
DTMFST(DTMFST)
31
ALARM MODE（AL-MOD）
40
SIGNAL CODE (S-CODE)
31
OPTIONAL SIGNAL (OPTSIG)
40
MUTE MODE SELECTION (SPMUTE)
41
36-37
CONTENTS
CONTENTS
TAIL TONE ELIMINATION（STE）
41
REVERSE FUNCTION（ R ）
48
TAIL TONE ELIMINATION WHEN THROUGH REPEATER（RP-SET）
42
FREQUENCY SCANNING
48
DELAY TIME OF TAIL TONE ELIMINATION WHEN THROUGH REPEATER（RPT-RL）
42
CHANNEL SCANNING
49
DISPLAYS WHEN POWER ON（PONMSG）
43
AUTOMATIC SEARCH FM RADIO（FM）
49
CALL END WARNING TONE（ROGER）
43
SEARCH CTCSS/DCS CODE
50
DUAL-WATCH OPERATION（TDR-AB）
44
CURSOR“▲” CONVERSION（A/B）
RESET（RESET）
44
STUN/KILL/REVIVE
51-52
VFO-MENU INITIALIZATION
45
SINGLE CALII/GROUP CALL/TROOP CALL
52-56
ALL-MENU AND CHANNEL INITIALIZATION
45
CTCSS TABLE LIST
MANUALLY LOCK THE KEYPADS
45
DCS TABLE LIST
58-59
FM RADIO（FM）
46
SPECIFICATONS
60
RAPID ALERT（ALARM）
46
JACKLIGHT
47
MONITOR（MON）
47
CABLE CLONE（COPING）
47
CHANNEL/FREQUENCY MODE CONVERSION（VF0/MR）
47
TX 1750Hz CALL TONE
47
50
57
CHARGING NOTES (1)
SUPPLIED ACCESSORIES
Carefully unpack the portable radio. We suggest that you check the following
items before you throw away the packing materials.
Battery packs are not charged when they are shipped, charge them before use.
STANDARD SUPPLIED ACCESSORIES
Initially charging the battery pack after purchase or extended storage (longer than 2 months) will
not bring the battery pack to its greatest capacity or its normal capacity, which can be done only
after repeatedly charging and discharging for two or three times.
QTY
ITEM
Portable radio
Antenna
Li-ion battery (7.2V)
Belt clip
charger
Adapter
User's manual
ʎ After the battery is charged to its highest capacity, don’t charge anymore, and
remove it from the charger. Otherwise it will affect the life of the battery.
ʎ Do not short-circuit the battery terminals or throw the battery into fire.
ʎ Never attempt to remove the casing from the battery pack.
STANDARD SUPPLIED ACCESSORIES
Please turn the power off before charging. It will affect the battery life when charging the
power-on radio.
Antenna
Li-ion Battery (7.2V)
Belt Clip
If the radio still shows low power after the normal charge, please change a new battery.
USER'S MANUAL
The average usage time of battery pack is 13 hours. Average usage time is 5% for transmitting,
5% for receiving and 90% for standby.
Charger
Adapter
User's Manual
01
02
ATTACHING THE BATTERY PACK
INSTALLING EXTERNAL SPEAKER/MICROPHONE
Insert the speaker/microphone plugs into the speaker/microphone jacks.
Slide the battery pack into the back of the radio in the direction of the arrow(①), then lock it
with the battery release button. Slide the battery pack until the battery release button makes a
"clicking" sound.
ʎ The radio is not fully rain resistant while using the
external speaker/microphone.
VFO
MR
A/B
BAND
MENU
STEP
TXP
WN
VOX
SAVE
BEEP
TDR
ABR
TOT
EXIT
SCAN
SQL
READY TO WORK
05
06
READY TO WORK
DIAGRAM
RELEASING THE BATTERY PACK
Jacklight
Antenna
Power/Volume switch
Turn off the radio before releasing the battery pack.
Push the battery release button in the direction of the arrow(①)as shown below.
LCD display
At the same time push the battery back.
VFO/MR key
The battery pack is then released.
A/B key
BAND key
Speaker
VFO
MR
A/B
BAND
Microphone
Indicator
Menu/Confirm key
keypad
Sp/Mic/Programming
Jacks
MENU
1STEP
2TXP
3SAVE
* SCAN
4VOX
5WN
6ABR
0SQL
7TDR
8BEEP
9TOT
EXIT
Exit key
Up/Down key
PTT switch
Jacklight/Monitor switch
FM radio/Alarm Key
Battery pack
READY TO WORK
07
08
DIAGRAM
LCD DISPLAY
BASIC OPERATION
PTT Key
Transmitting/Receiving switch key: Press "PTT" to transmit and speak to microphone.
Release "PTT" to receive.
CALL Key (FM/Alarm)
LCD ICON EXPLANATION
Press it for a short time to turn on FM radio function.Operate it again to turn it off.
Press it for a long time to turn on Alarm function.Operate it again to turn it off.
This symbol will appear when transmitting, it means transmitting CTCSS code.
This symbol will appear when transmitting, it means transmitting DCS code.
In frequency mode, this symbol will appear, it means transmitting frequency equals
receiving frequency plus the offset frequency. It can set different frequencies.
MON Key (Jacklight/Monitor)
In frequency mode, it will appear this symbol, it means transmitting frequency equals
receiving frequency minus the offset frequency. It can set different frequencies.
Press it for a short time to turn on Jacklight. Operate it again to turn it off.
Press it for a long time to turn on Monitor function.
Press Jacklight/Monitor key and turn the power on, to enter channel clone condition, it can copy one
radio's channel parameters to another one. Cloning cable must be used to connect these two radios.
It means the transmitting and receiving frequencies are different at current channel.
It means it already set dual watch operation function.
VOX function
Reverse function
LCD Display
It represents the remaining battery. when the battery is almost used up,the frame
starts to flicker and it forbids to transmit.
Display all the working condition.
It means the keypad is locked, pressing key #/Lock can unlock the keypad.
Low output power.
Current frequency and current menu setting.
Band Key
Signal strength.
UHF/VHF frequency band shift;
FM radio 65-75/76-108MHz shift;
In transmitting mode, press Band key to send 1750Hz call tone.
Channel number display
Frequency ending display
09
10
BASIC OPERATION
BASIC OPERATION
Function Keypads
*SCAN Key
Menu/Confirm key： MENU
It’s used for activating the menu, choose each menu item and confirm the parameter.
Up key (Press more than 2s, the channel and frequency will move upward rapidly; In scannig, press
Up key to upward scanning.):
Down key (Press more than 2s, the channel and frequency will move downward rapidly; In scannig,
press Up key to downward scanning)：
Press key Exit to exit and clear: EXIT
Press Scan key for a short time to activate RX/TX reverse function.
Press Scan key for more than 2s to start frequency or channel scanning.
In FM radio mode, press Scan key to automatically search FM stations.
In CTCSS/DCS mode, press Scan key to start CTCSS/DCS code scanning.
Key
In channel mode, press #
for a short time to switch H/L output power.
Press #
key for more than 2 seconds to lock or unlock the keypad.
Number Keypads
Input the information to the radio.
Input the non-standard CTCSS code in non-standard mode.
In transmitting mode, press number keys to send corresponding DTMF code.
MENU
1STEP
2TXP
4VOX
7TDR
Power/Volume Switch
EXIT
3SAVE
* SCAN
5WN
6ABR
0SQL
8BEEP
9TOT
Turn the Power/Volume switch clockwise to turn the power on.
Turn the Power/Volume switch counter-clockwise to turn the power off.
Turn the Power/Volume switch clockwise to volume up, otherwise it’s volume down.
Indicator
BASIC OPERATION
Transmitting: the red light glitter
Receiving: the green light glitter
Sp/Mic/Programming Jacks
11
12
It’s used for external speaker/microphone.
It’s used to connect cable for computer programming or application upgrade.
BASIC OPERATION
FAST MENU SETTING
Press
Press
Press
press
Menu key;
Menu key again;
Up/Down key to select Menu No.
Menu to confirm or EXIT key to exit(As picture below).
Menu No.
Menu
Parameter
FAST MENU OPERATION FLOW
Menu No.
Menu
Parameter
Menu No.
No.
Feature
Squelch
Level
SQL
MENU+0
Step
Frequency
STEP
MENU+1
STEP 1
20.5K
Press Menu key,
and then press
or key to
choose.
Output
Power
TXP
MENU+2
TXP 2
HIGH
Battery
Saving
SAVE
MENU+3
VOX
VOX
Channel
Bandwidth
Auto
Backlight
Menu No.
Menu
Menu
Parameter Setting
Parameter Confirm
NOTE
Function
Function Set
Characterr
Confirm key
Back Key
Page
0-9 levels
0:Lowest
9:Highest
MENU
PTT/
EXIT
P22
STEP 1
12.5K
2.5/5.0/6.25
/10.0/12.5/
25.0KHZ
MENU
PTT/
EXIT
P23
Press Menu key,
and then press
or key to
choose.
TXP 2
LOW
HIGH: 6W
MENU
PTT/
EXIT
P24
SAVE 3
Press Menu key,
and then press
or key to
choose.
SAVE 3
OFF：OFF
１:１ ２:２
３:３ ４:４
MENU
PTT/
EXIT
P24
MENU+4
VOX 4
OFF
Press Menu key,
and then press
or key to
choose.
VOX 4
OFF: OFF
10: Lowest
Sensitivity
1: Highest
Sensitivity
MENU
PTT/
EXIT
P25
W/N
MENU+5
WN 5
WIDE
Press Menu key,
and then press
or key to
choose.
WN 5
NARR
W: 25.0K
N: 12.5K
MENU
PTT/
EXIT
P25
ABR
MENU+6
Press Menu key,
and then press
or key to
choose.
ABR 6
NARR
OFF:1-5s
MENU
PTT/
EXIT
P26
ʎ ① In channel mode, the setting of following features is invalid:
CTCSS/DCS, Wide/Narrow bandwidth, PTT-ID.
Busy channel lock, Channel scan additive, Channel name edit.
② High/Low power can only be changed by pressing fast key #.
MENU FUNCTIONS
13
14
FAST MENU OPERATION FLOW
LCD Display
SQL
ABR
OFF
Parameter
LCD Display
Press Menu key,
and then press
or key to
choose.
SQL
Selectable
LOW: 1W
FAST MENU OPERATION FLOW
No.
Feature
Function
Function Set
Characterr
FAST MENU OPERATION FLOW
LCD Display
Parameter
LCD Display
Selectable
Confirm key
Back Key
Page
No.
Feature
Function
Function Set
Characterr
LCD Display
Parameter
LCD Display
Selectable
Confirm key
Back Key
Page
Dual-watch
Operation
TDR
MENU+7
TDR 7
OFF
Press Menu key,
and then press
or key to
choose.
TDR 7
ON
ON
OFF
MENU
PTT/
EXIT
P26
14
Voice
Reminding
VOICE
MENU+14
VOICE 14
OFF
Press Menu key,
and then press
or key to
choose.
VOICE 14
ON
ON
OFF
MENU
PTT/
EXIT
P30
Keypad
Sound
Reminding
BEEP
MENU+8
BEEP 8
OFF
Press Menu key,
and then press
or key to
choose.
BEEP 8
ON
OFF
MENU
PTT/
EXIT
P27
15
ANI-ID
ANI-ID
MENU+15
ANI-ID 15
*****
Press Menu key,
and then press
or key to
choose.
ANI-ID 15
*****
1-5 digit arbitrary
selection(It can
be programmed
by software.）
MENU
PTT/
EXIT
P30
Time-OutTimer
TOT
MENU+9
15,30……
600s
MENU
PTT/
EXIT
P27
16
DTMFST
DTMFST
MENU+16
Press Menu key,
and then press
or key to
choose.
DTMFST 16
DT-ST
MENU
PTT/
EXIT
P31
Receive
DCS
R-DCS
MENU+10
OFF
D023N-D754N
D023I-D754I
MENU
PTT/
EXIT
P28
17
Signal
Code
S-CODE
MENU+17
Press Menu key,
and then press
or key to
choose.
S-CODE 17
13
1-15 group
（It can be
programmed
by software.）
MENU
PTT/
EXIT
P31
SC-REV
MENU+18
SC-REV 18
TO
Press Menu key,
and then press
or key to
choose.
SC-REV 18
SE
TO:Time scanning
CO:Carrier wave
scanning
SE:Search
scanning
MENU
PTT/
EXIT
P32
Press Menu key,
and then press
or key to
choose.
PTT-ID
BOT
Press Menu key,
and then press
or key to
choose.
PTT-LT 20
10
11
12
13
Receive
CTCSS
Transmit
DCS
Transmit
CTCSS
R-CTCS
T-DCS
T-CTCS
MENU+11
MENU+12
MENU+13
TOT
15
R-DCS 10
OFF
R-CTCS11
OFF
T-DCS 12
OFF
T-CTCS 13
OFF
Press Menu key,
and then press
or key to
choose.
Press Menu key,
and then press
or key to
choose.
TOT
600
R-DCS 10
D023N
Press Menu key,
and then press
or key to
choose.
R-CTCS 11
67.0HZ
Press Menu key,
and then press
or key to
choose.
T-DCS 12
D023N
Press Menu key,
and then press
or key to
choose.
T-CTCS 13
67.0HZ
OFF
67.0-254.1HZ
OFF
D023N-D754N
D023I-D754I
OFF
67.0-254.1HZ
MENU
MENU
MENU
PTT/
EXIT
PTT/
EXIT
PTT/
EXIT
DTMFST16
OFF
S-CODE17
P28
18
Scan
Resumed
Mode
P29
19
PTT ID
PTT-ID
MENU+19
PTT-ID 19
OFF
20
PTT ID
Prolong
Time
PTT-LT
MENU+20
PTT-LT 20
P29
15
16
19
OFF
DT-ST:Sending
by keypads
ANI-ST:Auto
sending
DT+ANI:Auto
sending and
sending by
keypads
OFF:Press PTT not to send
BOT:Press PTTto send.(PTT
ID code can choose from
program software
EOT:Release PTT to send.
BOTH:Press or release PTT
to send.
0,1,2……
30ms
MENU
MENU
PTT/
EXIT
PTT/
EXIT
P32
P33
FAST MENU OPERATION FLOW
No.
21
22
23
24
25
26
27
Feature
Function
Function Set
Characterr
A Channel
Display
Mode
B Channel
Display
Mode
Busy
Channel
Lock
Auto
Keypad
Lock
Frequency
Offset
Direction
Setting
Frequency
Deviation
Channel
Store
MDF-A
MDF-B
BCL
AUTOLK
SFT-D
OFFSET
MEM-CH
MENU+21
MENU+22
MENU+23
MENU+24
MENU+25
MENU+26
MENU+27
FAST MENU OPERATION FLOW
LCD Display
Parameter
MDF-A 21
FREQ
Press Menu key,
and then press
or key to
choose.
MDF-B 22
FREQ
Press Menu key,
and then press
or key to
choose.
BCL 23
OFF
Press Menu key,
and then press
or key to
choose.
AUTOLK 24
OFF
Press Menu key,
and then press
or key to
choose.
SFT-D 25
OFF
Press Menu key,
and then press
or key to
choose.
OFFSET 26
Press Menu key,
and then press
or key to
choose.
MEM-CH 27
Press Menu key,
and then press
or key to
choose.
00.000
000
LCD Display
MDF-A 21
CH
MDF-B 22
CH
BCL
ON
23
AUTOLK 24
ON
SFT-D 25
ON
OFFSET 26
05.000
Selectable
FREQ:Channel+
frequency
CH: Channel
NAME:Channel
name(It can be
programmed by
software.)
FREQ:Channel+
frequency
CH:Channel
NAME:Channel
name(It can be
programmed by
software.)
ON
OFF
ON
OFF
OFF
+:TX frequency
＞RX frequency
-:TX frequency
＜RX frequency
00.00069.9975MHZ
Confirm key
MENU
MENU
MENU
MENU
MENU
MENU
Back Key
PTT/
EXIT
PTT/
EXIT
PTT/
EXIT
PTT/
EXIT
PTT/
EXIT
PTT/
EXIT
Page
No.
P33
28
Channel
Delete
29
MEM-CH 27
036
MENU
PTT/
EXIT
Function
Function Set
Characterr
DEL-CH
MENU+28
Standby
Backlight
WT-LED
MENU+29
30
RX
Backlight
RX-LED
MENU+30
31
TX
Backlight
TX-LED
MENU+31
32
Alarm
Mode
AL-MOD
MENU+32
33
Optional
Signal
OPTSIG
MENU+33
SPMUTE
MENU+34
LCD Display
DEL-CH 28
000
WT-LED 29
OFF
P34
RX-LED 30
OFF
P34
TX-LED 31
OFF
P35
P35
AL-MOD 32
OFF
OPTSIG 33
DTMF
P36
34
0-127
Channels
Feature
P36-37
17
18
Mute Mode
Selection
SPMUTE 34
QT
Parameter
LCD Display
Press Menu key,
and then press
or key to
choose.
DEL-CH 28
006
Any one of
the stored
channels.
MENU
PTT/
EXIT
P38
Press Menu key,
and then press
or key to
choose.
WT-LED 29
RED
OFF
Green
Red
Yellow
MENU
PTT/
EXIT
P38
Press Menu key,
and then press
or key to
choose.
RX-LED 30
RED
OFF
Green
Red
Yellow
MENU
PTT/
EXIT
P39
Press Menu key,
and then press
or key to
choose.
TX-LED 31
RED
OFF
Green
Red
Yellow
MENU
PTT/
EXIT
P39
Press Menu key,
and then press
or key to
choose.
AL-MOD 32
SITE
SITE:Site alarm
TONE:Send
alarm tone
CODE:Send
alarm code
MENU
PTT/
EXIT
P40
ON
OFF
MENU
PTT/
EXIT
P40
MENU
PTT/
EXIT
P41
Press Menu key,
and then press
or key to
choose.
Press Menu key,
and then press
or key to
choose.
OPTSIG 33
DTMF
SPMUTE 34
QT+DT
Selectable
QT: CTCSS conform
to receive the call.
QT+DT: CTCSS
and DTMF conform
to receive the call.
QT*DT: CTCSS or
DTMF conform to
receive the call.
Confirm key
Back Key
Page
FAST MENU OPERATION FLOW
No.
Feature
35
Tail Tone
Elimination
Function
Function Set
Characterr
STE
MENU+35
36
Repeater
Tail Tone
Elimination
RP-STE
MENU+36
37
Time of
Repeater
Tail Tone
Elimination
RPT-RL
MENU+37
38
Displays
When Power
On
PONMSG
MENU+38
39
Reminding
of End
Talk
ROGER
MENU+39
40
41
Dual-watch
Operation
(Cross Band
TX/RX)
Reset
FAST MENU OPERATION FLOW
LCD Display
STE 35
OFF
RP-STE 36
OFF
RPT-RL 37
OFF
PONMSG38
OFF
ROGER 39
FULL
TDR-AB
MENU+40
TDR-AB 40
OFF
RESET
MENU+41
RESET 41
ALL
Parameter
Press Menu key,
and then press
or key to
choose.
LCD Display
SIT
CH
35
Selectable
Confirm key
Back Key
Page
No.
Feature
ON
OFF
MENU
PTT/
EXIT
P41
Manually
Lock the
Keypads
Function
Function Set
Characterr
Press Menu key,
and then press
or key to
choose.
RP-STE 36
OFF
1,2…10ms
MENU
PTT/
EXIT
P42
FM Radio
Press Menu key,
and then press
or key to
choose.
RPT-RL 37
OFF
1,2…10ms
MENU
PTT/
EXIT
P42
Rapid
Alert
Press Menu key,
and then press
or key to
choose.
PONMSG 38
MSG
FULL：Full
frequency
character
MSG:Display
of NUT logo
MENU
PTT/
EXIT
P43
Jacklight
Press Menu key,
and then press
or key to
choose.
ROGER 39
ON
ON
OFF
MENU
PTT/
EXIT
P43
Monitor
Press Menu key,
and then press
or key to
choose.
TDR-AB 40
OFF
A band transmit
(Upper row
frequency)
A band transmit
(Bottom row
frequency)
MENU
PTT/
EXIT
P44
Cable
Clone
COPING
Press Menu key,
and then press
or key to
choose.
RESET 41
VFO
VFO：Menu
initialization
ALL：Menu
and channel
initialization
MENU
PTT/
EXIT
P44
Channel /
Frequency
Mode
Conversion
VFO/MR
19
20
FM
ALARM
LCD Display
Press key
“#”for
more than 2s.
400.875
136.225
Slightly
press
Call key
FM
100.700
Press CALL
key for more
than 2s.
138.625
Parameter
LCD Display
Selectable
Confirm key
Back Key
Page
400.875
136.225
Repeatedly press
key“#”for more
than 2s to lock
or unlock.
Auto
Auto
P45
Auto
PTT/
CALL
P46
Auto
PTT
P46
Repeatedly
tap MON key
to turn Jackight/
Warning light off.
Auto
Auto
P47
Press key MON
for more than 2s
to turn it on.
Release key MON
to turn it off.
Auto
Auto
P47
Auto
Auto
P47
Press BAND key,
and then press▲
or▼key to choose,
or it can input
numbers directly.
MR/VFO6575MHZ
76-108MHZ
65-108MHZ
ALARM
Tap MON
key
MON
Press key
MON for more
than 2s.
Press key
MON for more
than 2s.
COPING
Press the
VFO/MR key.
400.875
136.225
Press Menu key,
and then press
or key to
choose.
400.875 3
136.225 4
Display channel
mode according
to menu21 and
22.
Auto
Auto
P47
FAST MENU OPERATION FLOW
FAST MENU OPERATION FLOW
No.
Feature
Function
Function Set
Characterr
Frequency
Scanning
Conversion
Selectable
400.875
136.225
Confirm key
Back Key
Page
High/Low
Power Fast
Conversion
Repeatedly tap
key“ ”to
turn it on or off.
Auto
Auto
P48
STUN
KILL
REVIVE
SINGLE CALII
GROUP CALL
TROOP CALL
400.875
136.225
Press key ▲or▼
to change the
scanning direction.
Scan upward
or downward
according to
the set step
frequency.
Auto
PTT/
EXIT
P48
In channel
mode, press
key“ ”for
more than 2s.
400.875 3
136.225 4
Press key ▲or▼
to change the
scanning direction.
Scan upward
or downward
according to
the set
channels.
Auto
PTT/
EXIT
P49
FM Radio
band:
65-108MHz.
Auto
PTT/
CALL
P49
Automatcally
research
CTCSS/
DCS code.
MENU
PTT/
EXIT
P50
A(Upper row)/
B(Bottom row)
Auto
Auto
P50
FM
In FM Radio
mode, press
key“ ”.
MENU+10
or MENU+11
A/B
Tap key “AB”
FM
100.700
R-CTCS
or R-DCS
400.875 3
136.225 4
Repeatedly
press key
“ ”.
Press“
key
*”
Repeatedly
press key
“AB”
400.875 3
136.225 4
Function
Function Set
Characterr
P47
In frequency
mode, press
key“ ”for
more than 2s.
Feature
Release
PTT
FM
No.
Auto
Tap“ ”key
Research
CTCSS/DCS
Code
Cursor "▲"
LCD Display
Channel
Scanning
Auto
Search FM
Radio
Parameter
Press key
PTT+BAND
TX 1750Hz
Call Tone
Reverse
Function
LCD Display
21
22
H/L
LCD Display
Repeatedly
press key“#”
400.875 3
136.225 4
PTT+Remote
code
400.875
136.225
Parameter
Repeatedly
press key“#”
LCD Display
400.875 3
136.225 4
Selectable
H:6W
L:1W
Stun:only receive
without transmit.
Kill:receive and
transmit forbidden.
Revive: activate it
back to normal use.
Confirm key
Back Key
Page
P50
Auto
Auto
Auto
Auto P51-52
P52-56
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
VOX Function（VOX）——Menu No.4
Auto Backlight（ABR）——Menu No.6
When this function is on, the system will recognize your talking to the microphone and then it will
automatically shift to transmitting mode without manual operation (This function is useful for
earphone users).
The operation steps are as follows:
This function can adjust the auto off time after radio display backlight is on.
1. In frequency or channel mode, press Menu+4, the LCD displays:
VOX 4
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose VOX level. The LCD displays:
are (OFF-10) levels. OFF:OFF 10: Lowest level
VOX
The operation steps are as follows:
2. Press key Menu, and then press key ▲ or ▼ to choose the backlight display time(1-5s). The LCD
There
displays:
1: Highest level
ABR 6
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The LCD
displays:
ABR 6
OFF
1. In frequency or channel mode, press Menu+6, the LCD displays:
VOX
400.875
136.225
NOTE
ʎ We suggest you set 4-5 levels.
NOTE
Dual-watch Operation（TDR）——Menu No.7
ʎ The higher level is, the higher sensitivity of microphone is.This function is invalid
When this function is on, you may receive the signal of channel A and channel B at the same time.
If any AB channel or frequency receives signal, “▲” will glitter on corresponding channel or
460.125 3
frequency.Example：Channel A: 460.125MHz，Channel B: 151.235 MHz ，The LCD displays:
151.235 4
460.125
or
151.235
in scanning and FM radio mode.
The operation steps are as follows:
TDR 7
1. In standby mode, press Menu+7, the LCD displays:
OFF
TDR 7
2. Press key Menu, and then press key ▲ or ▼ to choose ON, the LCD displays:
ON
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
460.125 3
151.235 4
NOTE
ʎ In dual-watch operation mode, you can change the parameter of AB channel or frequency freely.
25
26
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Squelch Level（SQL）——Menu No.0
Output Power（TXP）——Menu No.2
This function can turn on or off the monitor according to signal strength.
This function can choose High/Low output power.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+0, the LCD displays:
2. Press key Menu, the LCD displays:
SQL 0
SQL 0
1. In frequency or channel mode, press Menu+2, the LCD displays:
2. Press key Menu, the LCD displays:
TXP 2
LOW
TXP 2
HIGH
3. Press key ▲ or ▼ to choose squelch level.There are 0-9 levels. 0: Lowest 9: Highest
3. Press key Menu, and then press key ▲ or ▼ to choose.High: 6W，Low: 1W，
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
ʎ Selecting high output power can improve the call quality, low output pow can reduce radiation and the
ʎ Too high squelch level may result in failing to receive in weak signals，Too low squelch level will
battery capacity loss. In channel mode, press fast key "#" to switch between high and low output power.
make it be disturbed by other signals.
Battery Saving（SAVE）——Menu No.3
Step Frequency（STEP）——Menu No.1
This function is mainly to save battery capacity when the radio is standby.
This function can choose the step frequency you want to set.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+3, the LCD displays:
STEP 1
1. In frequency mode, press Menu+1, the LCD displays:
25.0K
STEP 1
2. Press key Menu, the LCD displays:
12.5K
3. Press key ▲ or ▼ to choose your desired step frequency.You can set 2.5/5.0/6.25/10.0/12.5/
25.0KHz step frequency.
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
SAVE 3
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose battery saving function. The LCD displays:
There are five kinds of mode. ①OFF ②1：1 ③1：2 ④1：3 ⑤1：4 Example: 1: 1(1s’working,1s’
battery saving) 1：2 (1s’working, 2s’battery saving)
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
NOTE
ʎ If you choose OFF, the radio is not battery saving. In general, we suggest you choose 1:1.
ʎ In channel mode, this function is invalid.
23
24
SAVE 3
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Keypad Sound Reminding（BEEP）——Menu No.8
Receiving DCS（R--DCS）——Menu No.10
This function is to set the reminding sound. It will beep when you press keypad.
Using this function can set your privacy and prevent disturbance from others or match with the code
of other radios.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+8, the LCD displays:
1. In frequency mode, press Menu+10, the LCD displays:
BEEP 8
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose ON, the LCD displays:
R-DCS10
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose. The LCD displays:
BEEP 8
ON
R-DCS10
D023N
OFF: OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
R-DCS：D023N-D754N（Normal DCS）
R-DCS：D023I-D754I（Inverse DCS）
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
Time-Out-Timer（TOT）—— M enu No.9
DCS
400.875
136.225
Receiving CTCSS（R--CTCS）——Menu No.11
This function is to limit the calling time, the radio will stop transmitting and then launch voice if
it transmits over setted time.
Using this function can set your privacy and prevent disturbance
from others or match with the code of other radios.
The operation steps are as follows:
Example, if you want to set time limit for 15s. The operation steps are as follows:
11
1. In frequency or channel mode, press Menu+9, the LCD displays:
normal and inverse DCS
in this radio.【see attached
list (2)】This function is invalid
in channel mode.
R-CTCS
1. In frequency mode, press Menu+11, the LCD displays:
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose from 67.0—254.1Hz.The LCD displays:
CTCSS：67.0—254.1Hz， OFF： OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
400.875
The LCD displays: CT 136.225
TOT 9
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose 15s, The LCD displays:
NOTE
ʎ There are 208 groups of
TOT 9
15
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
R-CTCS 11
67.0Hz
NOTE
ʎ There are 50 groups of CTCSS.【see attached list (1)】. This function is invalid in channel mode.
27
28
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Transmitting DCS（T--DCS）——Menu No.12
Voice Reminding（VOICE）——Menu No.14
Using this function can set your privacy and prevent disturbance from others or match with the code
of other radios.
It will voice remind you when you operate the radio. It’s convenient for users.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency mode, press Menu+12, the LCD displays:
T-DCS12
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
1. In frequency or channel mode, press Menu+14, the LCD displays:
T-DCS 12
D023N
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
DCS
VOICE14
OFF
VOICE 14
ON
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
400.875
136.225
NOTE
ʎ There are 208 groups of normal and inverse DCS in this radio.【see attached list (2)】
This function is invalid in channel mode.
ANI-ID（ANI-ID）——Menu No.15
Transmitting CTCSS（T--CTCS）——Menu No.13
ANI-ID can check out the code of your radio.
This function can just be operated by program software, it can set 1-5 bit digit code.
Using this function can set your privacy and prevent disturbance from others or match with the code
of other radios.
The operation steps are as follows:
Example: The software set the ID code as 88888. The operation steps are as follows:
1. In frequency or channel mode, press Menu+15. the LCD displays:
T-CTCS13
OFF
1. In frequency mode, press Menu+13, the LCD displays:
T-CTCS13
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
67.0Hz
(CTCSS mode reference Menu No.11)
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
CT 400.875
The LCD displays:
136.225
! NOTE
ANI-ID15
88888
2. After searching, press key Menu to confirm, and then press key PTT or Exit to standby.
ʎ There are 50 groups CTCSS.【See attached list (1)】This function is invalid in channel mode.
29
30
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
DTMFST（DTMFST）——Menu No.16
Scan Resumed Mode（SC-REV）——Menu No.18
This function is that when the radio transmits, the recipient can hear the DTMF and ANI-ID code issued
by the radio.
The operation steps are as follows:
This function can scan activities from other radios’ frequencies or channels. You can select the scan
mode according to your request.
The operation steps are as follows:
18
SC-REV
1. In frequency or channel mode, press Menu+18, the LCD displays:
T0
SC-REV 18
2. Press key Menu, and then press key ▲ or ▼to choose，the LCD displays:
SE
There are three ways of scanning.
TO：Time scanning，continue to scan after searching signal for 5s.
CO：Carrier scanning，when it searches the signal, it continues to scan after the signal disappears.
SE：Search scanning，stop scanning once searching the signal.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
16
1. In frequency or channel mode, press Menu+16, the LCD displays: DTMFST
OFF
2. Press key Menu and then press key ▲ or ▼ to choose, the LCD displays: DTMFST 16
DT-ST
Choose mode: OFF： OFF
DT-ST：When transmitting, manually press keypads to make DTMF sound.
ANI-ST：When transmitting, it automatically makes DTMF sound.
DT+ANI：When transmitting, manually press keypads or automatically makes DTMF sound.
3. After setting, press key Menu to confirm, then press PTT or Exit to standby.
NOTE
PTT ID（PTT-ID）——Menu No.19
ʎ Select“OFF”when using in case to affect the radio.
This funcition can set the sound of sending PTT-ID when you press key PTT or release it.
Signal Code（S-CODE）——Menu No.17
The operation steps are as follows:
19
PTT-ID
1. In frequency or channel mode, press Menu+19, the LCD displays:
OFF
PTT-ID 19
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
BOT
There are four kinds of mode：
OFF：not send.
! NOTE
BOT：Press PTT key to send code.(The PTT-ID is set by software)
EOT：Release PTT key to send code.
Select“off”in
BOTH：Press or release PTT key to send code.
normal use to
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. avoid affecting
ʎ
the radio.
This function is to set radio signal code, it can set 1-15 groups. This function can just be set by
program software.
The operation steps are as follows:
1. In frequency or channel mode, press Menu+17, the LCD displays:
S-CODE17
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
S-CODE17
13
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
ʎ Do not use this function if not necessary in case to affect the radio.
31
32
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
B Channel Display Mode（MDF-B）——Menu No.22
PTT ID Prolong Time（PTT-LT）——Menu No.20
This function is to set the display mode of channel B.
This function is to set the prolong time of sending the radio’s PTT-ID.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode，press Menu+20, the LCD displays:
PTT-LT
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
1. In standby mode, press Menu+22, the LCD displays:
20
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
PTT-LT 20
Display modes： ① FREQ：Frequency + Channel No.
(There are 0-30ms to choose)
② CH：CH:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
22
MDF-B
FREQ
400.875
CH-004
400.875 3
ABC
3. After setting, press key Menu to confirm,and then press key PTT
NOTE
ʎ Channel name must be set
by program software. It can
edit any three numbers or
characters.
or Exit to standby.
ʎ Select“0”in normal use to avoid affecting the radio.
MDF-B 22
CH
③ NAME：Channel Name
NOTE
400.875
136.225
A Channel Display Mode（MDF-A）——Menu No.21
This function is to set the display mode of channel A.
Busy Channel Lock（BCL）——Menu No.23
The operation steps are as follows:
1. In standby mode press Menu+21, the LCD displays:
MDF-A 21
FREQ
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
Display modes：① FREQ：Frequency + Channel No.
② CH: Channel No.
CH-OO3
136.225
③ NAME：Channel Name
400.875
136.225
The operation steps are as follows:
! NOTE
1. In standby mode, press Menu+23, the LCD displays:
ʎ Channel name must be set
3. After setting, press key Menu to confirm, and then press key
PTT or Exit to standby.
MDF-A 21
CH
ABC
136.225
When this function is on, it may prevent other radios’interference. If the selected channel or
frequency is being used by other radios, when you press key PTT, the radio you use can not transmit,
It can transmit only when the station can not receive any signals.
23
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
by program software. It can
edit any three numbers or
characters.
FUNCTION OPERATION AND DESCRIPTION
BCL
OFF
ON：ON
BCL 23
ON
OFF: OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
33
34
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Auto Keypad Lock（AUTOLK）——Menu No.24
Frequency Deviation（OFFSET）——Menu No.26
When power on, but the radio is not in the working mode, the keypad will be automatically
locked after 15s.
Using this function, you can set the deviation between receiving and transmitting frequency.
In general, this function is used for repeater. The frequency deviation of this radio is：0-69.990MHz.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+24, the LCD displays:
24
AUTOLK
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
ON：ON
26
OFFSET
1. In frequency mode, press Menu+26, the LCD displays:
00.000
2. Press key Menu, and then input your desired deviation frequency.
If you want to input the frequency deviation 5MHz, pls input numbers 0、5、0、0、0 directly.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
AUTOLK 24
ON
OFF: OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
If you set on, the LCD displays:
400.875
136.225
NOTE
ʎ Setting the frequency offset direction. (See Menu No.25)
Frequency Offset Direction Setting（SFT-D）——Menu No.25
Using this function, you may set different receiving and transmitting frequencies. In general, it’s
used for repeater.
The operation steps are as follows:
Channel Store （MEM-CH）——Menu No.27
When the radio is in frequency working mode or standby mode, input the desired frequency or
parameters directly.
25
SFT-D
1. In frequency mode, press Menu+25, the LCD displays:
OFF
SFT-D 25
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
The frequency deviation mode：
a. Transmitting frequency higher than receiving frequency（+）；
! NOTE
b. Transmitting frequency lower than receiving frequency（-）；
ʎYou should set different
c. OFF
frequency deviation
3. After setting, press key Menu to confirm, and then press key PTT or
according to the repeaters
Exit to standby.
400.875
selected.This function is
When you set the frequency deviation (+), the LCD displays:
136.225
ʎ
400.875
invalid in channel mode.
When you set the frequency deviation (-), the LCD displays:
The operation steps are as follows:
27
MEM-CH
1. In frequency mode, press Menu+27, the LCD displays:
000
2. Press key Menu, and then press key ▲ or ▼ to choose channel number, or you can input your
desired channel number directly.Fox example, if you want to input No. 25 channel, pls input number
0、2、5 directly.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
Example：Channel 1（Same frequency） Receiving frequency: 465.875 MHz CTCSS: 71.9 Hz
Transmitting frequency: 465.875 MHz CTCSS: 71.9 Hz
Channel 2（different frequency）Receiving frequency: 465.575 MHz
Transmitting frequency: 460.575 MHz CTCSS: 88.5 Hz
136.225
35
36
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
First, storing channel 1：
a. In frequency mode, input number 4, 6, 5, 8, 7, 5.
b. Press Menu+11, the LCD displays:
R-CTCS 11
OFF
c. Press key Menu, and then press key ▲ or ▼ to adjust to 71.9 Hz, the LCD displays:
R-CTCS 11
71.9Hz
Channel Delete（DEL-CH）——Menu No.28
d. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.The LCD
displays:
CT
465.875
136.225
e. Press key Menu+13, the LCD displays:
T-CTCS 13
OFF
This function is used to delete channels and information of the radio.
Example: Delete channel 2
T-CTCS13
71.9Hz
f. Press key Menu, and then press key ▲ or ▼ to adjust to 71.9 Hz，the LCD displays:
1. In frequency or channel mode, the LCD displays:
g. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The
LCD displays:
CT
465.875
136.225
h. Press Menu+27. the LCD displays:
MEM-CH
000
The LCD displays:
MEM-CH 27
001
k. Press key VFO/MR to channel mode, display modes see Menu No.21 and Menu No.22.
Secondly,storing channel 2:(Transmitting frequency is 5MHz lower than receiving frequency.）
c. Press key Menu, and then press key ▲ or ▼ to adjust to 88.5 Hz，the LCD displays:
CT
465.875
136.225
e. Press Menu+25, the LCD displays:
SFT-D
OFF
T-CTCS13
88.5Hz
Standby Backlight（WT-LED）——Menu No.29
SFT-D 25
g. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The
LCD displays:
OFFSET 26
00.000
MEM-CH 27
000
k. Press key Menu, and then press key ▲ or ▼ to choose No.2 channel
or input number 0,0, 2 directly. The LCD displays:
The operation steps are as follows：
1. In frequency or channel mode, press Menu+29, the LCD displays:
NOTE
MEM-CH 27
002
There are four options:
has the original channel or not,
if does, you need to delete it
before channel storing. (Channel
delete see Menu No.28)
M. Press key VFO/MR to channel mode, the LCD displays:
29
WT-LED 29
RED
OFF
YELLOW
GREEN
RED
L. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
465.575
136.225
WT-LED
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
ʎ Pls check the channel you store
i. Press key Menu, then input number: 0, 5, 0, 0, 0
j. Press Menu+27, the LCD displays:
You can choose the color of backlight when the radio is standby.
25
f. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
h. Press Menu+26, the LCD displays:
NOTE
With display CH-*** means there is storage channel, and then can be deleted.
d. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.After transmitting, the
LCD displays:
28
ʎ Please correctly choose the channel you want to delete in case to restorage and uncessary trouble.
a. In frequency mode, input number 4, 6, 5, 5, 7, 5.
T-CTCS13
OFF
DEL-CH
002
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
j. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
b. Press Menu+13, the LCD displays:
28
2. Press key Menu,and then press key ▲ or ▼ to adjust channel 002 or input number 0,0, 2 directly.
27
i. Press key Menu, and then press ▲ 001 channel or input number 0, 0, 1 directly, the LCD displays:
DEL-CH
000
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
Display modes see Menu No.21 and Menu No.22.
37
38
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
RX Backlight（RX-LED）——Menu No.30
Alarm Mode （AL-MOD）——Menu No.32
You can choose the color of backlight when the radio is receiving.
This function can set tone alarm/code alarm/site alarm of the radio.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+30, the LCD displays:
RX-LED
OFF
30
2. Press key Menu,and then press key ▲ or ▼ to choose, the LCD displays:
There are four selection:
1. In frequency or channel mode, press Menu+32, the LCD displays:
RX-LED 30
RED
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
There are three options:
OFF：
AL-MOD 32
TONE
SITE ALARM
CODE ALARM
GREEN
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
RED
3. After setting, press key Menu to confirm，and then press key PTT or Exit to standby.
TX Backlight（TX-LED）——Menu No.31
You can choose the color of backlight when the radio is transmitting.
The operation steps are as follows:
TX-LED
OFF
31
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
There are four options:
32
TONE ALARM
YELLOW
1. In frequency or channel mode, press Menu+31, the LCD displays:
AL-MOD
OFF
TX-LED 31
RED
OFF
Optional Signaling（OPTSIG）——Menu No.33
YELLOW
Set “OFF”, the DTMF shut down.
GREEN
Set “DTMF”, the DTMF open.
RED
3. After setting, press key Menu to confirm，and then press key PTT or Exit to standby.
39
40
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Mute Mode Selection（SPMUTE）——Menu No.34
Tail Tone Elimination When Through Repeater（RP-SET）——Menu No.36
This function can be set up receiving decoding mode for radio.
This function is that when the radio is through the repeater, the transmitter release PTT to enter
receiving condition.Because of the delay of the repeater, it will receive the noise from repeater to
confirm if the repeater is working or not.
The operation steps are as follows:
34
TDR-AB
1. On channel or frequency mode, press MENU + 34, the LCD displays:
OFF
2. Press MENU, then pres“▲”or “▼”to choose, the LCD displays: TDR-AB 34
There are three options:
QT: CTCSS conform to receive the call
QT+DT: CTCSS and DTMF conform to receive the call
QT*DT: CTCSS or DTMF conform to receive the call
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The operation steps are as follows:
1. In frequency or channel mode, press Menu+36, the LCD displays:
RP-STE 36
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
RP-STE 36
OFF: OFF 1, 2, 3, 4, 5……10 for prolong time.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
ʎ Pls close this function in normal use, lest affect your normal conversation.
Delay Time Of Tail Tone Elimination When Through Repeater
（RPT-RL）——Menu No.37
Tail Tone Elimination（STE）——Menu No.35
This function is that when the radio use through repeater, the aim is to confirm if the repeater have
transferred the signal.
The operation steps are as follows:
To eliminate the annoying audio generated by the other radio after the transmitter ends the
communication.
The operation steps are as follows:
1. In frequency or channel mode, press Menu+37, the LCD displays:
STE 35
1. In frequency or channel mode, press Menu+35, the LCD displays:
OFF
STE 35
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
ON
There are two options : ON
OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
RPT-RL 37
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
OFF: OFF 1, 2, 3, 4, 5……10 for prolong time.
3. After setting, press key Menu to confirm, and then
press key PTT or Exit to standby.
41
42
RPT-RL37
NOTE
ʎ Pls close this function in normal use,
lest affect your normal conversation.
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Displays When Power On（PONMSG）——Menu No.38
Dual-watch Operation（TDR-AB）——Menu No.40
This function can set the display mode when power on.
The function is to set A band or B band is transimit band when in dual-watch state.
It also can be used for cross band receiving and transmitting.
The operation steps are as follows:
The operation steps are as follows:
1. In frequency or channel mode, press Menu+38, the LCD displays:
PONMSG 38
FULL
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
40
TDR-AB
1. In frequency or channel mode, press Menu+40, the LCD displays:
OFF
TDR-AB 40
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
There are three options:
OFF：“▲”or “▼”will glitter on transmitting frequency band.
A band to transmit in dual-watch code
B band to transimit in dual-watch code
CT 465.575
Example: The LCD displays:
136.225
① Choose A means 465.575MHz is the transmitting frequency band, 136.225MHz is the
receiving frequency band.
② Conversely, choose B means 136.225 MHz is transmitting frequency band, 465.575MHz is
receiving frequency band.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
PONMSG 38
MSG
FULL：Full frequency character display
MSG：QS logo display.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
4. Setting FULL, the LCD displays：
; Setting MSG, the LCD displays:
45UV
WELCOME
Call End Warning Tone（ROGER）——Menu No.39
This function is to make receptor hear a beep when conversation ends.
The operation steps are as follows:
1. In frequency or channel mode, press Menu+39, the LCD displays:
ROGER 39
OFF
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
ROGER 39
ON
OFF: OFF
Reset（RESET）——Menu No.41
ON: ON
This function is to set Menu and channel initialization. You can set the desired
function and parameter after reset.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
43
44
INSTALLING ANTENNA
CHARGING NOTES (2)
Plug the AC adapter into the back of the charger. Then plug the power cable of the adapter into
Attach the antenna to the radio as illustrated on the right.
city electric power.
VFO
MR
A/B
BAND
Slide the Li-ion battery pack or radio with a Li-ion battery pack
into the charger.
VFO
MR
INSTALLING BELT CLIP
A/B
BAND
MENU
EXIT
2TXP
3SAVE
*SCAN
4VOX
5WN
6ABR
0SQL
7TDR
8BEEP
9TOT
1STEP
Attach the belt clip with the supplied screws by a phillips screw driver.
ʎ Make sure the battery pack is in connected with the charging
terminals.
ʎ When charging begins, the RED LED light displays.
ʎ When the battery pack is charged to its greatest capacity, the
GREEN LED light displays. And pls remove the battery or radio
from charger.
03
04
MENU
1STEP
2TXP
3SAVE
*SCAN
4VOX
5WN
6ABR
0SQL
7TDR
8BEEP
9TOT
EXIT
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
VFO-Menu initialization
FM Radio（FM）
1. In frequency or channel mode, press Menu+40, the LCD displays:
RESET 41
VFO
You can listen to the radio frequency, the frequency range is from 65-108MHz.
2. Press key Menu, and then press key ▲ or ▼ to choose VFO, and then press key Menu
again，the LCD displays:
The operation steps are as follows:
RESET 41
SOURE？
3. Press key Menu, the LCD displays:
1. In frequency or channel mode,tap call key, the LCD displays:
RESET 41
WATT
2. Press key ▲ or ▼ to adjust radio frequency manually or input known radio frequency.
4. Press key Menu to confirm and return to standby automatically.
Example:100.7MHz
88.9MHz
ALL-Menu and channel initialization
RESET 40
ALL
1. In frequency or channel mode, press Menu+40,
the LCD displays:
RESET 40
RESET 40
SOURE？
3. Press key Menu, the LCD displays:
Input number 1, 0, 0, 7, 0, 0 directly.
Input number 8, 8, 9, 0, 0 directly.
3. Repeatedly press“*”key can be automatically adjusted to the radio station.
4. Tap call key to exit FM radio.
RESET 40
ALL
SURE?
2. Press key Menu, and then press key ▲ or ▼ to choose
ALL, and then press key Menu
again，the LCD displays:
FM
100.700
RESET 40
WATT
switch to the frequency or channel state for nornal transimiting and receiving. And it will
automatically switch to FM state when signal disappears.
4. Press key Menu to confirm and return to standby automatically.
Manually Lock the Keypads
Rapid Alert（ALARM）
This function can lock the keypads.
1. Press key “#” for more than 2s, the radio will be locked and the LCD displays:
NOTE
ʎ When listening to the radio, the frequency or channel of A/B receiveing signal will automatically
ALARM
In frequency or channel mode, press CALL key for more
than 2s for rapid alarm, the LCD
136．275
ALARM
displays:
Press key PTT to cancel.
400.875
136.225
136．275
2. Press key “#” for more than 2s to unlock.
NOTE
ʎ Alarm mode see Menu No.32.
45
46
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Jacklight
Reverse Function（ R ）
This function is suitable for night lighting and warning light.
Tap key MON to turn on night lighting.Operate it again to turn on warning light.
Operate it again to turn it off.
When you set different frequencies, tapping“*”key can shift the transmitting and receiving
400.875
frequency, the LCD displays:
136.225
The operation steps are as follows:
1. As above picture the receiving frequency of channel A is 420.875MHz, the transmitting frequency
Monitor（MON）
frequency is 425.875MHz.
In the same frequency mode, it can monitor signal from the others.
Press MON key for more than 2s to turn it on. Release MON key to turn it off.
2. Tap“*”key, the receiving frequency is changed to 425.875MHz, the transmitting frequency
is changed to 400.875MHz, the LCD displays:
Cable Clone（COPING）
425.875
136.225
NOTE
ʎ This function is invalid in the same frequency.
This function can copy one radio’s information to another one.
The operation steps are as follows：
Frequency Scanning
1. Connect with the main-radio and sub-radio by cloning cable.
2. Press and hold MON to turn the radio on, the LCD displays: COPING. The red light of main-radio
glitter and the green light of sub-radio glitter
3. When the red and green light do not glitter, the LCD of sub-radio displays:
or WELCOME
r 45UV
it means it successed in cloning.
This function can scan the frequency activity from other radios.
The operation steps are as follows:
1. In frequency mode, press key“*” for more than 2s, it will frequency scan according
to setted step frequency.
2. Press key ▲ or ▼ to change the direction of scanning.
Channel/Frequency Mode Conversion（VF0/MR）
3. Press any key to confirm after scanning the signal.
Tap VFO/MR key to switch between channel and frequency mode.
! NOTE
TX 1750Hz Call Tone
ʎ Scanning mode see Menu No.18
Press key PTT+BAND to send 1750Hz call tone (This function is for the repeater of European market) .
47
48
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Channel Scanning
Search CTCSS/DCS Code
This function can scan the frequency activity from other radios.
Using this function may search and store the CTCSS/DCS code from other radios when in same frequecy.
The operation steps are as follows:
Example: CTCSS code scanning; the transmitting frequency is 465.255MHz，CTCSS is 88.5Hz
The operation steps are as follows：
1. In channel mode, press key“*”for more than 2s, it can scan according to the channel you setted.
1. In frequency mode, press Menu+11, the LCD displays:
2. Press key ▲ or ▼ to change the direction of scanning.
3. Press any key to confirm after scanning the signal.
NOTE
2. Press key Menu, the LCD displays:
R-CTCS 11
OFF
3. Press key “*”, the LCD displays:
R-CTCS 11
OFF
4. When other radio transmits, the LCD displays:
ʎ Scanning mode see Menu No.18
CT
R-CTCS 11
OFF
R-CTCS 11
OFF
,CT ▲glitter means the radio
has entered scanning condition.
5. The CTCSS will in turn and fast move from 67.0-254.1MHz.
6. After searching the CTCSS code, the radio will beep and stop scanning.
Automatic Search FM Radio（FM）
7. After setting, press key MR/VFO to confirm and store, otherwise press key PTT or Exit to standby.
This function can automatically search the FM radio frequency.The frequency range is from
65-108MHz
The operation steps are as follows:
ʎ 1. The operation steps of DCS scanning is the same with CTCSS, except that it needs to press
1. In frequency or channel mode, tap call key, the LCD displays:
FM
100.700
NOTE
Menu+10 to enter scanning. 2. If CTCSS have not searched the code, you can search DCS mode.
2. Repeatedly press “*” key can automatically search the FM radio frequency.
3. Tap call key to exit FM.
Cursor“▲” Conversion（A/B）
Directly taping AB key can move the cursor up and down, you can modify or confirm the
parameters of the frequency and channel where the cursor is.
NOTE
ʎ When listening to the radio, the frequency or channel of A/B receiving signal will automatically switch to
the frequency or channel state, and when normal transmit and receive signal disappears it will
automatically switch to FM state. Manually search see Menu 42.
49
50
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
three same digits of ANI code of 3 sub-radio and two digits of troop call “100AA” and stun code “A8A8A” by
Stun/Kill/Revive
keypad (Note: 100AAAB*88), finally the sub-radios can only receive without transmit. If you want to recover them
This function can remote control other radios in these status: only receive without transmit, receive
in normal working, press PTT key of main-radio and input first three same digits of ANI code of 3 sub-radio and two
and transmit forbidden, activate it back to normal use. Stun: only receive without transmit, Kill: receive
digits of troop call “100AA” and revive code “A8A8A” (Note: 100AAA8A8A), the sub-radios will return in normal
and transmit forbidden, Revive: activate it back to normal use.
use.
32
6. If you want to stun all the sun-radios at the same time, press PTT key of main-radio, then input troop code “AAAAA”
The radio has 19 keypads, including digit 0-9, *, # , function keys and ABCD letter keys. (Details
please refer to digit keypads basic operation in page 11). Implementation step: press PTT to
and stun code “AB*88” (Note: AAAAAAB*88), finally all the sub-radios can only receive without transmit. If you want
send both the ANI ID of sub-radio and remote code to realize the function, each code is 5 digits.
Operating steps:
to recover them in normal working, press PTT key of main-radio, then input troop call of sub-radios “AAAAA” and
revive code “A8A8A” (Note: AAAAAA8A8A), finally all the sub-radios will return in normal use.
1. Please click “Edit” in PC program software, then click “DTMF code”, finally fill custom 5 digit code (Stun/Kill/
7. In order the radio will be stunned or killed randomly, there is a “controlled” in the option box of DTMF in the
Revive) in the parameter frame. There is “ troop call code” in option box and choose code “A” (troop call code
software, if you select “√ ”, it mean the radio will be stunned or killed accordingly, if do not select “√ ”, it mean
is universal character of ANI code), finally write into radio. (Note: Troop call code can be ABCD*#)
For example: Stun code AB*88
Kill code CD120
the radio can not be controlled to entry state of stun or kill.
Revive code A8A8A
2. The ANI code of sub-radio should be set by computer programming, please write user-defined ANI code in
NOTE
ʎ Note: You should close PTT-ID code sending when operate function of stun, kill or revive, it’s
“ ID CODE”frame after press “Edit” and “DTMF” .(Details please refer to Menu 15 in page 30) Note: The ANI
better to set the code mixed with ABCD*#.
code of each radio is independent.
For example: 1st sub-radio: 10026 2nd sub-radio: 10088 3rd sub-radio: 10033 4th sub-radio: 222333
Single call/Group call/Troop call
3. Open DTMF in menu 33 and confirm it. When DTMF is working, you should choose “QT” or “QT&DT” in menu
The function can realize single call, group call and troop call in same frequency by DTMF and PTT-ID.
34 to realize normal talk. CTCSS and DCS also must stay the same.
4. If you want to remote stun 2nd sub-radio, press PTT key of main-radio and input ANI code of 2nd sub-radio “10088”
The radio has 19 keypads, including digit 0-9, *, # , function keys and ABCD letter keys. (Details
and stun code “AB*88” by keypad (Note: 10088AB*88), then the 2nd sub-radio can only receive without transmit.
please refer to digit keypads basic operation in page 11). Implementation step: please send
If you want to recover it in normal working, press PTT key of main-radio and input ANI code of 2nd sub-radio
own ANI code firstly, then send adverse ANI code, you should send two codes to activate
communication, each code is 5 digits.
“10088”and revive code “A8A8A” by keypad (Note: 10088A8A8A), the 2nd sub-radio will return in normal use.
Operating steps in frequency mode:
5. If you want to remote stun 1st, 2nd, 3rd sub-radios at the same time, press PTT key of main-radio, then input first
51
52
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
1. ANI code can be set by PC programming only, you can input user-defined code in “ ID CODE” frame after click
b. When you want to make a group call, press and hold PTT key of main radio to send the own PTT-ID code, then
input the first three same digits of 1st sub-radio and 2nd sub-radio and 2 digit group call code 100AA (Note:
“DTMF” and “Edit” in toolbar. (Details please refer to Menu 15 in page 30) Note: The ANI code of each radio is
88888100AA) by keypad, the group call of 1st sub-radio and 2nd sub-radio is successfully activated.
independent.
c. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888”, then input the first
For example: 1st sub-radio: 10026 2nd sub-radio: 10088 3rd sub-radio: 22233 4th sub-radio: 88888
three same digits of 1st sub-radio and 2nd sub-radio and 2 digit group call code 100AA (Note: 88888100AA) by
2. Set up parameters in each radio, in Menu 17 (Details in page 31), select one of fifteen groups ( Note: 15 groups
keypad, the group call of 1st sub-radio and 2nd sub-radio is successfully activated.
signal code corresponds to DTMF code in software) and confirm it. In Menu 19, open up PTT-ID and notice the
d. You should press PTT key of either 1st sub-radio or 2nd sub-radio to send the confirm message to main radio
delay time of code sending （Details in page 33）, then confirm it. In Menu 33, open up DTMF (Details in page 40)
after the group call is activated, finally the three radios can work with each other. If the activate time is 5s, it
and confirm it. In Menu 34, set the mute type (details in page 41) and confirm it.
mean you should resend the code to activate it when the radio standby more than 5s.You can set up the activate
3. Single Call
time in frame “1-15s launch overtime warning” in DTMF side tone after clicking “option box” and “Edit” in
We only want to call individually even if when all radios are set in the same frequency.
PC program software.
a. If you want to call 1st sub-radio, press and hold the PTT key, the radio will send PTT-ID automatically when
calling, then input the ID code “10026” of 1st sub-radio (Note: 8888810026) , the single call of 1st sub-radio
5. Troop Call
is successfully activated.
For example: we can set the troop call when many radios are in the same frequency.
b. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888” and AI code
a. There is “ troop call code” in option box and choose code “A” (troop call code is universal character of ANI
“10026” of 1st sub-radio (Note: 8888810026), the single call of 1st sub-radio is successfully activated.
code) after click “Edit” and “DTMF” in toolbar, finally write it into radio. (Troop call code can be mixed with
c. You should press PTT key of 1st sub-radio to send the confirm message to main radio after the single call is
ABCD*#)
activated, finally the two radios can work with each other. If the activate time is 5s, it mean you should resend
b. When you want to make a troop call, press and hold PTT key of main radio to send the own PTT-ID code, then
the code to activate it when the radio standby more than 5s.You can set up the activate time in frame “1-15s
input the five digits troop call code “AAAAA” (Note: 88888AAAAA), the troop call is successfully activated.
launch overtime warning” in DTMF side tone after clicking “option box” and “Edit” in PC program software.
c. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888”, then input the five
4. Group Call
digits troop call code “AAAAA” (Note: 88888AAAAA), the troop call is successfully
For example: set two radios as a group call when many radios are in the same frequency.
d. You should press PTT key of any sub-radios to send the confirm message to main radio after the troop call is
a. There is “ troop call code” in option box and choose code “A” (troop call code is universal character of ANI code)
activated, finally all the radios can work with each other. If the activate time is 5s, it mean you should resend the
after click “Edit” and “DTMF” in toolbar, finally write it into radio. (Troop call code can be mixed with ABCD*#)
code to activate it when the radio standby more than 5s.You can set up the activate time in frame “1-15s launch
53
54
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
overtime warning” in DTMF side tone after clicking “option box” and “Edit” in PC program software.
4. Parameters setting: select Menu 19, then open PTT-ID and set the delay time of code sending (Details please refer
Single call/Group call/Troop call in channel mode
to page 33) and confirm it; select Menu 33, then open DTMF (Details please refer to page 40) and confirm it; select
1. If you want to make single call/group call/troop call in channel mode, please select Menu 27 to store channel (details
Menu 34 to set the silent mode and select QT+DT (Details please refer to page 41) and confirm it, finally the setting
please refer to page 36) or set all the above parameters in PC programming and write them into radios, corresponding
is finished.
to the above a, b, c, d to realize function after finish the above A and B operation steps accordingly.
5. If you want to make a single call to 1st sub-radio: in Menu 17 “signal code” (Details please refer to page 31) and
Automatic Control of Single Call/Group call/Troop call
select first group (Note: The signal code corresponds to DTMF code in PC software) and confirm it; press PTT key
It mean you can activate these function only by selecting the signal code and pressing PTT key, no
of main radio to transmit the own PTT-ID and adverse PTT-ID, the single call is activated successfully. If you want to
need to use sending code.
call signal code of 2nd sub-radio and 3rd sub-radio please select corresponding second and third group.
Operating steps:
6. If you want to make a group call to 1st sub-radio and 2nd sub-radio: in Menu 17 “signal code” (Details please refer
1. ANI code can be set by PC programming only, you can input user-defined code in “ ID CODE” frame after click
to page 31) and select the fourth group (Note: The signal code corresponds to DTMF code in PC software) and
“DTMF” and “Edit” in toolbar. (Details please refer to Menu 15 in page 30) Note: The ANI code of each radio is
confirm it; press PTT key of main radio to transmit the own PTT-ID and group call code, the group call is activated
independent.
successfully.
For example: 1st sub-radio: 10026 2nd sub-radio: 10088 3rd sub-radio: 22233 4th sub-radio: 88888
7. If you want to make a troop call: in Menu 17 “signal code” (Details please refer to page 31) and select the fifth
2. There is “ troop call code” in option box and choose code “A” (troop call code is universal character of ANI code),
group (Note: The signal code corresponds to DTMF code in PC software) and confirm it; press PTT key of main radio
finally write into radio. (Troop call code can be ABCD*#)
to transmit the own PTT-ID and troop call code, the troop call is activated successfully.
3. Steps to set 15 groups of signal code: please click “Edit” in toolbar and click “DTMF”, then input the AI code of
8. You should press PTT key of any sub-radio to send the confirm message to main radio after the single call/group
1st sub-radio, 2nd sub-radio and 3rd sub-radio to the corresponding 1, 2, 3 code group in DTMF frame, then input
call/troop call is activated, finally all the radios can work with each other. If the activate time is 5s, it mean you should
group code “100AA” to four groups and input troop code “AAAAA” to the five groups (Note: The signal code
resend the code to activate it when the radio standby more than 5s.You can set up the activate time in frame “1-15s
corresponds to DTMF code in PC software is in Menu 17, details please refer to page 31), finally write into the radio
launch overtime warning” in DTMF side tone after clicking “option box” and “Edit” in PC program software.
Code Group Sending Code
after edit.
10026
10088
22233
100AA
AAAAA
For example:
NOTE
ʎ The function is only valid when
PTT-ID is open.
55
56
CTCSS
DCS
01
D023N
18
D115N
35
D212N
52
D306N
69
D431N
86
D546N
02
D025N
19
D116N
36
D223N
53
D311N
70
D432N
87
D565N
03
D026N
20
D122N
37
D225N
54
D315N
71
D445N
88
D606N
04
D031N
21
D125N
39
D226N
55
D325N
72
D446N
89
D612N
218.1
05
D032N
22
D131N
39
D243N
56
D331N
73
D452N
90
D624N
45
225.7
06
D036N
23
D132N
40
D244N
57
D332N
74
D454N
91
D627N
46
229.1
07
D043N
24
D134N
41
D245N
58
D343N
75
D455N
92
D631N
08
D047N
25
D143N
42
D246N
59
D346N
76
D462N
93
D632N
09
D051N
26
D145N
43
D251N
60
D351N
77
D464N
94
D654N
10
D053N
27
D152N
44
D252N
61
D356N
78
D465N
95
D662N
11
D054N
28
D155N
45
D255N
62
D364N
79
D466N
96
D664N
12
D065N
29
D156N
46
D261N
63
D365N
80
D503N
97
D703N
13
D071N
30
D162N
47
D263N
64
D371N
81
D506N
98
D712N
14
D072N
31
D165N
48
D265N
65
D411N
82
D516N
99
D723N
15
D073N
32
D172N
49
D266N
66
D412N
83
D523N
100
D731N
16
D074N
33
D174N
50
D271N
67
D413N
84
D526N
101
D732N
17
D114N
34
D205N
51
D274N
68
D423N
85
D532N
102
D734N
01
67.0
11
94.8
21
131.8
31
171.3
41
203.5
02
69.3
12
97.4
22
136.5
32
173.8
42
206.5
03
71.9
13
100.0
23
141.3
33
177.3
43
210.7
04
74.4
14
103.5
24
146.2
34
179.9
44
05
77.0
15
107.2
25
151.4
35
183.6
06
79.7
16
110.9
26
156.7
36
186.2
07
82.5
17
114.8
27
159.8
37
189.9
47
233.6
08
85.4
18
118.8
28
162.2
39
192.8
48
241.8
09
88.5
19
123.0
29
165.5
39
196.6
49
250.3
10
91.5
20
127.3
30
167.9
40
199.5
50
254.1
CTCSS
57
58
DCS
DCS
SPECIFICATIONS
103
D743N
121
D114I
139
D212I
157
D311I
175
D445I
193
D612I
104
D754N
122
D115I
140
D223I
158
D315I
176
D446I
194
105
D023I
123
D116I
141
D225I
159
D325I
177
D452I
106
D025I
124
D122I
142
D226I
160
D331I
178
107
D026I
125
D125I
143
D243I
161
D332I
179
GENERAL
D624I
Frequency range
VHF:136~174MHz，UHF:400~480MHz
195
D627I
Rated voltage
DC7.2V(Rechargeable Li-ion battery)
D454I
196
D631I
Memory channel
128 channels
Antenna impedance
50Ω
D455I
197
D632I
Working manner
Same frequency single operation or different frequency single operation
Step frequency
2.5/6.25/10/12.5KHz
Frequency sensitivity
±2.5ppm
Working temperature
-20℃~+50℃
108
D031I
126
D131I
144
D244I
162
D343I
180
D462I
198
D654I
109
D032I
127
D132I
145
D245I
163
D346I
181
D464i
199
D662I
110
D036I
128
D134I
146
D246I
164
D351I
182
D465I
200
D664I
Battery capacity
2500mAh
Dimensions
122mmX63mmX36mm
111
D043I
129
D143I
147
D251I
165
D356I
183
D466I
201
D703I
112
D047I
130
D145I
148
D2521
166
D364I
184
D503I
202
D712I
TRANSMITTER
RECEIVER
Output power
5W
Sensitivity
-122dBm(12dB SINAD)
113
D051I
131
D152
149
D255I
167
D365I
185
D506I
203
D723I
Modulation mode
11KФF3E
Modulation band
5KHz
114
D053I
132
D155I
150
D261I
168
D371I
186
D516I
204
D731i
Maximum frequency deviation
2.5KHz
Audio power
1W
115
D054I
133
D156I
151
D263I
169
D411I
187
D523I
205
D732I
Supurious radiation
<7.5μW
Audio distortion
<10%
Adjacent channel selectivity
≤-60dB
Receive current
≤380mA
Emission current
≤0.4A
Intermodulation
≥60dB
116
D065I
134
D162I
152
D265I
170
D412I
188
D526I
206
D734I
117
D071I
135
D165I
153
D266I
118
D072I
136
D172I
154
D271I
171
D413I
189
D532I
207
D743I
CTCSS/DCS frequency deviation
0.4KHz±0.1KHz
Adjacent channel selectivity
≥60dB
172
D4231
190
D546I
208
D754I
Modulation sensitivity
8~12mV
Spurious rejection
≥65dB
Signal-noise rate
≥-40dB
119
D073I
137
D174II
155
D274I
173
D431I
191
D565I
120
D074I
138
D205I
156
D306I
174
D432I
192
D606I
ʎ All stated specifications are subject to change without notice or obligation
DCS
59
60
SPECIFICATIONS
SAFETYTRAINING INFORMATION
Your Fujian Nanan Quansheng Electronics Co.,Ltd. radio generates RF electromagnetic
energy during transmit mode. This radio is designed for and classified as “Occupational Use
Only”, meaning it must be used only during the course of employment by individuals aware
of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by
the “General Population” in an uncontrolled environment.
This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only”. In addition,
your Fujian Nanan Quansheng Electronics Co.,Ltd. radio complies with the following Standards and Guidelines
with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
The information listed above provides the user with the information needed to make him or
her aware of RF exposure, and what to do to as‐sure that this radio operates with the FCC RF
exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, your Fujian Nanan Quansheng Electronics Co.,Ltd. radio generates RF energy that can
possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas
where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic
radiation such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment
provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment
at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning
lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be
maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip).
Do not use this device when antenna shows obvious damages
Only the headset reported in test report can be used.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Startup Profile                 : Print
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:12:22 13:57:09+08:00
Modify Date                     : 2014:12:22 14:14+08:00
Metadata Date                   : 2014:12:22 14:14+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 108
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12037 bytes, use -b option to extract)
Document ID                     : uuid:078AC75C9F89E4118FCBCBB7AFB63F17
Instance ID                     : uuid:9e8f922a-92f7-4d50-ae9f-1cd116531497
Derived From Instance ID        : uuid:f7fa83ce-828c-4e61-a081-6b45b5d4c1cc
Derived From Document ID        : xmp.did:89F15AAB477CE4119A3F839D3D41DF10
Derived From Rendition Class    : proof:pdf
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 340.000263
Max Page Size H                 : 129.998611
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, HiraginoSansGB-W3, HiraginoSansGB-W6, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Arial, Hiragino Sans GB, Hiragino Sans GB, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, W3, W6, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 3.00, Version 3.02, Version 3.02, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 0.75
Font Composite                  : False, False, False, False, False
Font File Name                  : ARIAL.TTF, Hiragino Sans GB W3.otf, Hiragino Sans GB W6.otf, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Format                          : application/pdf
Title                           : TG-45UV鑻辨枃璇存槑涔? 20140403
Has XFA                         : No
Page Count                      : 36
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XBPTG-45UV

Navigation menu