Qingdao Hisense Intelligent Commercial System HM518 Tablet POS User Manual HM518
Qingdao Hisense Intelligent Commercial System Co., Ltd. Tablet POS HM518
User Manual
Tablet POS HM518 USER MANUAL Qingdao Hisense Intelligent Commercial System Co., Ltd. Part 1. System Introduction 01. Safety Notices Before Installation or Use 02. System Introduction 03. General Specifications 04. Front View 05. Back View 06. Dimension 07. I/O View Part 2. System Installation 01. Checking the Location for Installation 02. Before Connecting Peripherals 03. Connecting DC power supply cable 04. Package Part 3. Product Layout 01. Motherboard layout 02. Motherboard Module&Function 03. Product layout 04. Product Module&Function Part 1. System Introduction 01. Safety Notices Before Installation or Use Caution: ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ It is required grounded well and the supply voltage shall be stable, and you must confirm that the voltage of the outlet provides shall be in line with the voltage marked on the lable of the unit. Be sure not to sprinkle any liquid or fall any object into the unit. Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS. Do not switch on or off the host frequently, because it is easy to result in damage on the machine. Be sure not to unplug or plug in any live part or external device when they are in energized state, and the connecting cables of the POS between parts shall be connected securely. Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand, please contact with the reseller. The unit shall be used under dry, ventilated & clean environment away from sunlight. In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you must switch off the power supply at once and then contact with reseller. The RJ11 port at the back of the host is connected with the cash drawer, as it is not a communication port, users shall not use the port for dial‐up networking. The product is a Level B one, it may cause radio interference in living environment. In such case, users may need to take practical & feasible measures against the interference. When the POS is not in use, you shall switch off power supply. Static may damage to the integrated circuit in the host machine. Please use original charger, Otherwise, It may result to danger. When you use a charger for charging, adapter shall be installed near the equipment and shall be easily accessible. Description Manufacturer Model Input Output Switching Power Adapter FSP GROUP INC. FSP040‐RHAN2 AC 100~240V DC 12V/3.33A Docking Station Qingdao Hisense Intelligent Commercial System Co.,Ltd HM518 DC 12V/3.33A DC 12V/3.33A ☆ ☆ ☆ ☆ ☆ ☆ This product conforms with standard EN50332. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. The product shall only be connected to a USB interface of version USB2.0,this interface can provide maximum current of 500mA. Extreme Operating Temperature : 40℃ The device complies with RF specifications when the device used at 10mm form your body. Declaration Of Conformity Hereby, This Tablet POS is in compliance with the essential requirements and other relevant provisions of directive 1995/5/EC. Customer can not modify system software, including "root" or any other crack methods. These methods are not permitted. If you do this, you will lose our Guarentee. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Warning: 1. For continued protection against risk of electrostatic, it can result in system or POS terminal damaged 2.Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type as recommended by the manufacturer, Discard used batteries according to the manufacturer’s instructions. 3. Do not remove the peripheral device before turn off the system. Turn on the system after turning on peripheral device, and turn off peripheral device after turn off the system FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer has the right to modify contents of the instruction book but without prior announcements! 02. System Introduction The exterior design and specifications of product can be changed without prior notice in order to improve quality. 03. General Specifications Item Description CPU Intel Celeron, N2807 Memory 2G Byte RAM Storage 32GByte eMMC System Win8.1 Pro/Embedded/with Bing Operating Temperature 0℃ ~ +40℃ Operating Humidity 10% ~ 90% Display TFT LCD 10.1"TFT LCD,1280*800 Brightness 300cd/m² Touch Screen MSR 1x1D Scanner Camera Rear:5MP, AF focus IC Card Reader Port Supports MIFARE one and MIFARE CPU card 1 xIC Card Reader Micro SD 1 x Micro SD slot SIM Card 1x SIM slot (WCDMA) Audio Built-in 1W speaker ; Microphone; 1 x 3.5-mm stereo headphone USB 1x USB2.0 Host WIFI Wi-Fi® 802.11a/b/g/n/ac 2.4GHz/5GHz BT DC input Docki ng station 3 Tracks Scanner NFC Tablet Multi-touch capacitive touch panel(10 points) BT 4.1 1 x DC jack (12V) VGA 1 * VGA reserved for 2nd display USB 3x USB2.0 Host LAN 1 * RJ-45 (100Mbps LAN) Cash Drawer 1 * RJ-11 12V/24V for cash drawer(24V default) 2* RS-232 COM, Serial Ports COM1(RX/TX/GND),COM2(RX/TX/GND/DTR/DSR) DC input Power adapter Battery Tablet(mm) Dimensions Tablet Weight(kg) Docking station(mm) Docking station Weight(kg) 1 x DC jack (12V) AC 100-240V / DC 12V 3.33A 4000mAh 7.4V 276 x 193 x 23.8 1.0 280 x 170.8 x 72.3 0.8 04. Front View 05.Back View 06. Dimension 07. I/O View Part 2. System Installation 01. Checking the Location for Installation It is important to choose a safe and secure place to install the terminal. •• Choose a desk or table big and strong enough to support the weight of the system and peripherals. •• Choose a flat, hard surface. Carpeted area can generate static electricity that can alter memory or damage system components. •• Make sure a system installed in a well‐ventilated place and keep the space free around the system. •• Choose appropriate environmental conditions such as cool and dry places. Avoid humid and dusty places. Also avoid direct sunlight, rapidly changing temperatures, or placing the system near heat sources. •• Select the appropriate voltage. Connect all the equipment into an isolated outlet to prevent static electricity and short circuit. •• where sufficient power outlets are available for printers and other peripheral devices. •• Do not install near electromagnetic and electrical devices, such as phones and electric moters, that can cause system damage. •• The socket‐outlet shall be installed near the equipment and shall be easily accessible. 02. Before Connecting Peripherals To connect peripherals first remove the 'Interface cover', which is in the bottom of the system. 03. Connecting DC power supply cable Docking station : Connect the DC power cable to the DC power input connector at the bottom of the system. (Adapter 100V ‐ 240V free voltage of the system can be used.) Tablet : when using 12V adapter for tablet charging, Connect the DC power input cable to the DC power input Port at the side of the tablet. 04. Package a. Docking station Package: AC adapter, Power Cord, Docking station b. Tablet Package: AC adapter,Power Cord, Tablet Part 3. Product Layout 01. Motherboard Layout 02. Motherboard Modules and Functions Num Module Li-battery WIFI+BT WIFI+BT micro SD+SIM Pogo LCD+TP Function Description Li-battery connector Wifi+BT module Wifi+BT antenna connector Micro SD+SIM board connector Pogo connector LCD+TP connector 7 10 11 12 13 14 15 16 17 18 19 20 MIC Speaker DC Jack Audio USB IC Button LED BIOS-battery connector GPS 3G 3G Camera/card reader GPS 03. Product Layout MIC connector Speaker connector DC Jack connector 3.5mm stereo headphone USB2.0 connector IC card acceptor Power button LED Indicators BIOS-battery connector GPS antenna connector 3G antenna connector 3G module Camera/Card reader board connector GPS module 02. Modules & Functions Num Module 10 11 12 13 14 15 16 17 18 19 20 Scanner FFC PCB FFC PCB Aluminum plate PCB Speaker MIC FPC FFC FFC PCB Antenna Antenna Li-battery Antenna LCD Touch Panel FFC Function Description 1D Barcode Scanner Scanner FFC cable Camera Board PCB Camera Board FFC cable MSR & RFID Board PCB Aluminum Thermal Spreader Mother Board PCB 8 Ohm, 1 Watt Speaker MIC LCD Screen and TP FPC cable Pogo FFC cable micro-SD/3G FFC cable micro-SD/3G Board PCB Wifi+BT antenna 3G antenna 4000mAh 7.4V Li-battery GPS antenna(optional) LCD Connector Touch Panel Connector Li-battery FFC cable
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2015:10:23 10:03:48+08:00 Create Date : 2015:10:23 10:03:48+08:00 Format : application/pdf Title : Microsoft Word - User Manual_HM518 Creator : Administrator Document ID : uuid:66a8df30-2ea8-437a-b9bf-9f1075953057 Instance ID : uuid:2222b4c9-62ec-46d6-9bed-398bac60fea8 Page Count : 15 Author : AdministratorEXIF Metadata provided by EXIF.tools