Qolsys QS1100 wireless door/window sensor to be used in the Qolsys IQ home security system User Manual

Qolsys, Inc. wireless door/window sensor to be used in the Qolsys IQ home security system

User Manual

IQ DOOR/WINDOW- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 1 OF 6© Last revised 2/27/15 All rights reservedThe Qolsys IQ Door/Window is a sleek, high-performance wireless sensor that detects opening and closing of doors, windows and anything else which opens and closes (drawers, cabinets, etc). It works seamlessly with the Qolsys IQPanel.1 Door/Window Sensor1 Magnet6 screws1 large strip of double sided adhesive1 small strip of double sided adhesivePRODUCT FEATURESPARTS INCLUDEDIQ DOOR/WINDOWWireless signal range: 600ft (200M),open air. Code outputs: tamper, tamper restore, alarm (primary open), alarm restore (primary close), external alarm (secondary wired open), external restore (secondary wired closed), low battery.Transmitter frequency : 319.5MHZ Unique code IDSupervisory keep-alive interval: 70 minutes. RF output power!91.1dBuV +/- 5% at 3mTECHNICAL SPECIFICATIONS•Low profile •Supports one or two doors, windows, etc. •Primary wireless magnet contact and secondary wired contact•Internal or external reed switch•Easy, wire-free installation •Secondary (optional) sensor (external wired Door/Window sensor) •Advanced circuit technology resulting in ultra-low power consumption•Easy to install Batteries•Over 5 years of battery life•Tamper Detection•Supervisory health messaging•Sensor Open and Close detection
6IQ DOOR/WINDOW- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 2 OF 6© Last revised 2/27/15 All rights reserved!"#$%&'&()'*)%*#+'#%'&()',##+'-+./)'.%,'&()'/.0%)&'#%'&()',##+1'2-'&()'*)%*#+'3*'$*),'#%',#$45)',##+*6'/#$%&'&()'*)%*#+'#%'&()'5).*&7$*),',##+'.%,'&()'/.0%)&'#%'&()'/#*&7$*),',##+1'!2-'8#**345)6'5#9.&)'*)%*#+*':3&(3%';<<'-&1'=><'/?'-+#/'&()'8.%)51'!@(35)'.'&+.%*/3A)+'/.B'(.C)'.'+.%0)'#-'D<<'E1'=F<<'/?'#+'/#+)'#$&'3%'&()'#8)%6'&()')%C3+#%/)%&'.&'&()'3%*&.55.&3#%'*3&)'9.%'(.C)'.'*30%3G9.%&')H)9&'#%'&+.%*/3&&)+'+.%0)1'I#/)7'J/)*'.'9(.%0)'3%'*)%*#+'#+3)%&.J#%'9.%'()58'#C)+9#/)'.,C)+*)':3+)5)**'9#%,3J#%*1'!".K)'*$+)'&()'.530%/)%&'.++#:'#%'&()'/.0%)&'8#3%&*'&#'&()'.530%/)%&'/.+K'#%'&()'*)%*#+."!L5.9)'*)%*#+*'.&'5).*&'D'3%1'=;M1FN'9/?'.4#C)'&()'O##+'&#'.C#3,',./.03%0'&()/1'!PC#3,'/#$%J%0'*)%*#+*'3%'.+).*':()+)'&()B':355'4)')Q8#*),'&#'/#3*&$+)'#+':()+)'&()'*)%*#+'#8)+.&3%0'&)/8)+.&$+)'+.%0)'#-'<'&#';F<RS'=<'&#'NTRU?':355'4)')Q9)),),1'!V*)'*8.9)+*'=%#&'3%95$,),?'&#'K))8'*)%*#+*'.%,'/.0%)&*'.:.B'-+#/'/)&.5'#+'/)&.5539'*$+-.9)*'*$9('.*'-#35':.558.8)+1'!PC#3,'/#$%&3%0'*)%*#+*'3%'.+).*':3&('.'5.+0)'W$.%&3&B'#-'/)&.5'#+')5)9&+39.5':3+3%06'*$9('.*'.'-$+%.9)'#+'$J53&B'+##/GUIDELINESBe sure to align the triangle guides on the sensor and magnet as shown. This will enable the proper contact between the sensor and magnet. When closed, the magnet should be within .4” of the sensor for optimum sensitivity. PLACEMENT AND SPACINGBATTERY ACTIVATIONTo activate the batteries in the sensor, remove the cover and pull out the plastic tabs between the batteries and the contacts. Please note: the sensor will not operate the reed switch and external contact header simultaneously. X./8)+'*:3&9(YQ&)+%.5'9#%&.9&'().,)+Z.A)+B'+)&)%J#%'9538*
IQ DOOR/WINDOW- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 3 OF 6© Last revised 2/27/15 All rights reservedMOUNTING WITH PROVIDED ADHESIVE![)/#C)'&()'4.9K'#-'&()'*)%*#+'4B'8+)**3%0'#%'&()'&.4'.%,'8$553%0'&()'9#C)+'#H!L5.9)'&()'4.*)'#-'&()'*)%*#+'#%'&()'.88+#8+3.&)'*$+-.9)'.%,'$*)'N'#-'&()'*$8853),'*9+):*'&#'*)9$+)'&()'/#$%J%0'85.&)'&#'&()'9(#*)%'5#9.J#%!X#'*)9$+)'&()'/.0%)&6'+)/#C)'&()'/#$%J%0'85.&)'4B'8+B3%0'3&'#H'&()'/.0%)&'9.*3%01''!Z)'*$+)'&()'.++#:*'#%'&()'&#8'#-'&()'9.*3%0'.530%':3&('&()'.++#:*'#%'&()'*)%*#+'9.*3%01''X()'*)%*#+'.%,'/.0%)&'*(#$5,'%#&'4)'/#$%&),'/#+)'&(.%'<1N'3%9()*'.8.+&1!V*)'&()'F'+)/.3%3%0'*9+):*'8+#C3,),'&#'*)9$+)'&()'/.0%)&'/#$%J%0'85.&)'3%'&()'8+#8)+'5#9.J#%1''U538'&()'/.0%)&'9.*3%0'4.9K'3%&#'85.9)'#%9)'&()'85.&)'3*'*)9$+)1''MOUNTING WITH PROVIDED HARDWAREL$*('&#'+)/#C)'*)%*#+'9#C)+![)/#C)'4.9K3%0'#%'#%)'*3,)'#-'&()'5.+0)',#$45)7*3,),'&.8)'.%,'*J9K'&()')Q8#*),'*3,)'#%'&()'4.9K'#-'&()'*)%*#+'.*'*(#:%1''![)/#C)'&()'#&()+'*3,)'#-'&()'5.+0)',#$45)7*3,),'&.8)'.%,'/#$%&'&()',)C39)'.99#+,3%0'&#'&()'3%*&.55.J#%'3%*&+$9J#%*![)/#C)'&()'4.9K3%0'#%)'*3,)'#-''&()'*/.55',#$45)7*3,),'&.8)'.%,'85.9)'#%'4.9K'#-'/.0%)&!\3%)$8'&()'/.0%)&':3&('&()'*)%*#+'$*3%0'&()'.++#:*'*(#:%'#%').9(',)C39)'+)*8)9JC)5B1'Y%*$+)'&()'*)%*#+'.%,'/.0%)&'.+)'%#&'*)8.+.&),'/#+)'&(.%'<1N'3%9()*'.*'*(#:%1![)/#C)'&()'*)9#%,'*3,)'#-'&()',#$45)7*3,),'&.8)'.%,'*)9$+)'&()'/.0%)&1
IQ DOOR/WINDOW- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 4 OF 6© Last revised 2/27/15 All rights reservedPROGRAMMING THE IQ DOOR/WINDOW X()'-#55#:3%0'*&)8*',)*9+34)'0)%)+.5'0$3,)53%)*'-#+'8+#0+.//3%0'=5).+%3%0?'&()'*)%*#+'3%&#'&()'2]'L.%)51'[)-)+'&#'&()'2]'L.%)5^*'3%*&.55.&3#%'3%*&+$9&3#%*'-#+'9#/85)&)'8+#0+.//3%0',)&.35*1'From the home screen of the IQ panel, touch the “Settings” iconY%&)+'&()'3%*&.55)+'8.**9#,)1''_)-.$5&'3%*&.55)+'8.**9#,)'3*';;;;1 2Touch the “Installation” app Touch the “Security Sensors” app3 4Touch the “AutoLearn Sensor” appX./8)+'&()'*)%*#+'4B'8+)**3%0'&()'&.4'.%,'53E3%0'#H'&()'9#C)+1''5 4A chime will sound X#$9('`aKb6 78Check the auto-populated fields to ensure accuracy. Customize device settings as desired. 9Create custom names by selecting “Sensor name” and choosing “Custom description.” A keyboard will appear, allowing you to type the name of your choice into the field. 10 Click “Add” to complete the process
IQ DOOR/WINDOW- INSTALLATION MANUALBATTERY REPLACEMENTTo replace batteries:•Push tab on side of sensor and lift off cover.•Place fingernail or small screwdriver under the battery and gently lift up. The battery should release easily. Remove old battery. Replace with a new battery by putting one end under the golden battery retention clip. Gently push toward the opposite side until the the battery snaps into place under the black plastic. •Repeat this process for the second battery.•Close cover by snapping the cover back onto the sensor.L$*('&#'+)/#C)'*)%*#+'9#C)+X./8)+'*:3&9(YQ&)+%.5'9#%&.9&'().,)+Z.A)+B'+)&)%J#%'9538*3V CR2032 Lithium(2 batteries per sensor)5+ years battery lifeBATTERY TYPEOperating Temperature: -10C~50CRelative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C ENVIRONMENTAL CHARACTERISTICSSUPPORTSensor: 3.25H x 1.3W x 1D in. (8x3x1.5 cm)Magnet: 1.3H x 0.435W x 0.312D in. (3.3 x 1.1 x 0.79 cm)PHYSICAL SPECIFICATIONSGOT QUESTIONS?CONTACT TECH SUPPORTTechSupport@Qolsys.com?QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 5 OF 6© Last revised 2/27/15 All rights reserved
IQ DOOR/WINDOW- INSTALLATION MANUALIMPORTANT INFORMATION15.21§ 15.21 Information to user.The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.CAUTION:! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.!15.105(b)§ 15.105 Information to the user.!(b) NOTE: This equipment has been tested andfound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.RSS-GEN Section 8.48.4 User manuals for licence-exempt radio apparatus shall contain the following text, or an equivalent notice that shall be displayed in a conspicuous location, either in the user manual or on the device, or both:This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.Document#: IQDW-IM-02-15Revision#: 2/27/15Issue Date: FEB 2015Qolsys Product #: QS-1100-P01Firmware : 0A_20121130Conforms to ANSI/UL Std. 634Certified to ULC Sub. C634Qolsys Inc. proprietary. Reproduction without permission is not permitted.QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 6 OF6© Last revised 2/27/15 All rights reserved

Navigation menu