Qolsys QS1200 is a wireless motion sensor to be used in the Qolsys IQ home security system. User Manual

Qolsys, Inc. is a wireless motion sensor to be used in the Qolsys IQ home security system.

a href="https://usermanual.wiki/Qolsys" itemprop="url"> Qolsys >

User Manual

IQ MOTION- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 1 OF 6© Last revised 2/27/15 All rights reservedThe Qolsys IQ Motion is a high-performance wireless motion sensor that uses advanced power circuit technology to extend battery life. The tamper-resistant casing along with an electronic sensor discourages physical tampering and the sensor is equipped with a pet immunity feature that prevents accidental triggers by household pets. The IQ Motion works seamlessly with the Qolsys IQ Panel. •Advanced circuit technology resulting in ultra-low power consumption•Tamper detection/reporting•Rigid wall mounting for discreet placement•Pet immunity •Easy to install batteries•Supervisory health messaging•Sensor Motion detection•Transmits 2 signals per 5 minute periodPIR (Passive Infrared) Motion Sensors2 Mounting screws2 AAA Alkaline batteriesPRODUCT FEATURESPARTS INCLUDEDIQ MOTION•Wireless signal range: 600 ft (200 m), open air•Code outputs: paring, tamper, tamper restore, alarm detect motion, alarm restore, supervisory, low battery•Transmitter frequency: 319.5MHZ +-15KHz •Transmitter bandwidth: 24KHZ•Modulation type: ASK-OOK•RF output power!91.1dBuV +/- 5% at 3m •Sensor Range 30 ft (9.1 m) x 50 ft (15.2 m) •Maximum Horizontal Sensing Angle 80°TECHNICAL SPECIFICATIONS
IQ MOTION- INSTALLATION MANUALQOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 2 OF 6© Last revised 2/27/15 All rights reserved•IQMotionSensor is designed for indoor use and is compatible with homes where pets up to 40 lbs (18 kg) are present. To minimize the possibility of false alarms the following guidelines should be followed:•The sensor may be mounted in a corner or on a flat wall that is free of vibrations.•If possible, mount the sensor within 100 ft (30.5 m) of the panel. While the transmitter may have a range of 600 ft (200 m) or more out in the open, the environment at the installation site can have a significant effect on transmitter range. Verify actual transmitter range for each installation.•Position the sensor to protect an area where an intruder is most likely to walk across the detection pattern.•Mount the sensor permanently on a flat wall or in a corner. •Mount the sensor on an interior wall facing in.•Position the sensor so it faces a solid reference point, such as a wall.•Close all windows in an area with an armed motion sensor.DO NOT: •Aim the sensor at windows, fireplaces, air conditioners, area heaters, or forced air heating vents.•Place the sensor in direct sunlight as sudden changes in temperature may trigger a false alarm.•Mount the sensor near duct work or other large metallic surfaces that may affect the RF signals.•Set the sensor on a shelf.GUIDELINESFlush-mount or corner-mount the sensor depending on the selected location and desired coverage areaMOUNTING OPTIONSBATTERY ACTIVATIONTo activate the batteries in the sensor, remove the cover and pull out the plastic tab between the batteries and the contacts. CORNER STRAIGHT MOUNTCORNER ANGLE DOWN MOUNTFLUSH WALL MOUNTFor pet immunity from a cornerFor pet immunityNo pet immunity
Download:
Mirror Download [FCC.gov]
Document ID2723293
Application ID6QQKjDP1MNxLS8E474WVcQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize33.81kB (422574 bits)
Date Submitted2015-08-24 00:00:00
Date Available2015-08-24 00:00:00
Creation Date2017-09-17 05:16:18
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-09-17 05:16:18
Document TitleUser Manual
FCC ID Filing: 2AAJXQS1200

Navigation menu