Queclink Wireless Solutions GD100 GSM/GPRS/GPS Tracker User Manual GD100 0506

Queclink Wireless Solutions Co.,Ltd GSM/GPRS/GPS Tracker GD100 0506

Contents

Users Manual

GD100Usermanual TRACGV3SUM001‐1‐GD100UserManualGSM/GPRS/GPSTrackerTRACGD100UM001Version:R1.02GD100
GD100UserManualTRACGD100UM001 ‐2‐DocumentTitleGD100UserManualVersionR1.02Date2016‐02‐22StatusReleaseDocumentControlIDTRACGD100UM001GeneralNotesQueclinkoffersthisinformationasaservicetoitscustomers,tosupportapplicationandengineeringeffortsthatusetheproductsdesignedbyQueclink.TheinformationprovidedisbaseduponrequirementsspecificallyprovidedtoQueclinkbythecustomers.Queclinkhasnotundertakenanyindependentsearchforadditionalrelevantinformation,includinganyinformationthatmaybeinthecustomer’spossession.Furthermore,systemvalidationofthisproductdesignedbyQueclinkwithinalargerelectronicsystemremainstheresponsibilityofthecustomerorthecustomer’ssystemintegrator.Allspecificationssuppliedhereinaresubjecttochange.CopyrightThisdocumentcontainsproprietarytechnicalinformationwhichisthepropertyofQueclinkWirelessSolutionsCo.,Ltd.Thecopyingofthisdocumentandgivingittoothersandtheusingorcommunicationofthecontentsthereof,areforbiddenwithoutexpressauthority.Offendersareliabletothepaymentofdamages.Allrightsreservedintheeventofgrantofapatentortheregistrationofautilitymodelordesign.Allspecificationsuppliedhereinaresubjecttochangewithoutnoticeatanytime. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. 
GD100UserManualTRACGD100UM001 ‐3‐ContentsContents............................................................................................................................................30RevisionHistory..............................................................................................................................61Introduction...................................................................................................................................71.1.Reference.............................................................................................................................72ProductOverview...........................................................................................................................82.1.Appearance.........................................................................................................................82.2.Button/Switch/USBInterfaceDescription...........................................................................82.3.LEDDescription...................................................................................................................92.4.UDISKBufferFile...............................................................................................................103.GettingStarted............................................................................................................................113.1.Partlist...............................................................................................................................113.2.Turnon/Turnoff................................................................................................................114TroubleshootingandSafetyInfo..................................................................................................124.1.Troubleshooting.................................................................................................................124.2.SafetyInfo..........................................................................................................................12
GD100UserManualTRACGD100UM001 ‐4‐TableIndexTABLE1.GD100PROTOCOLREFERENCE........................................................................................7TABLE2.GD100LEDDESCRIPTIONTABLE......................................................................................9
GD100UserManualTRACGD100UM001 ‐5‐FigureIndexFIGURE1.APPEARANCEOFGD100..................................................................................................8
GD100UserManualTRACGD100UM001 ‐6‐0 RevisionHistoryRevisionDateAuthorDescriptionofchange1.002015‐12‐23DocterXuInitialRelease1.012016‐01‐07BlackChenModifyPWRLEDdescription1.022016‐02‐22BlackChenModifyLEDdescription
GV55UsermanualTRACGD100UM001 ‐7‐1 IntroductionGD100isapowerfulGPStrackerdesignedforfixedassettrackingapplications.ItworkswiththreeCR123Alithium‐batteriesandwilloperatefor60dayswithreadingdateandreportingfour(4)timesperday.Withbuilt‐intemperaturesensor,GD100willdetecttheoutsidetemperatureandtriggerwarningmessageswhenoutsidetemperatureisoutofoperatingtemperatureranges‐20℃‐85℃.Andalso,GD100supportslightdetectionandcantriggerevenmessagesbylightsensor.Basedintegrated@trackprotocol,theGD100cancommunicatewithabackendserverthroughtheGPRS/GSMnetworktotransferreportsofemergency,geo‐fenceboundarycrossings,lowbatteryorscheduledGPSpositionalongwithmanyotherusefulfunctions.SystemIntegratorscaneasilysetuptheirtrackingsystemsbasedonthefull‐featured@Trackprotocol.Table1. GD100ProtocolReferenceSNDocumentnameRemark[1]GD100@TrackAirInterfaceProtocolTheairprotocolinterfacebetweenGD100andbackendserver.1.1. Reference
GV55UsermanualTRACGD100UM001 ‐8‐2 ProductOverviewFigure1. AppearanceofGD1002.2. Button/Switch/USBInterfaceDescriptionUSB Port/Power Switch Description START/STOP Button Start: When START button is pressedafter received real time command‘ACT’, the device enters startcountdown mode.Stop: When STOP button is pressed,the device will not monitor temperatureanymore. At this stage, DATA light andTEMP light will turn green and be solidon, and other lights will work normally.After all the recorded messages aresent out to server, DATA green lightand TEMP Green light will be solid onand the other lights will be off, whichmeans the recording has stoppedworking.2.1. Appearance1313
GD100UsermanualTRACGD100UM001 ‐9‐USB Port  If the battery switch is on, it will work as a serial port for configuration.  If battery switch is off, it will work as a mass storage. Note: If you want to change work mode of USB, you need to reboot the device. Toggle Switch  Turn on GD100 when switch to “ON”.  Turn off GD100 when switch to “OFF”. 2.3. LEDDescriptionThere are five LEDs on GD100, the description as follows. Table2. GD100LEDDescriptionTableLED Device status LED status CELL (Green) Device is searching GSM network. Fast flashing Device has registered to GSM network. Slow flashing SIM card needs pin code to unlock. ON Receive a valid protocol command. Keep on for 3 seconds GPS (Green) GPS chip is powered off. OFF GPS sends no data or data format error. Slow flashing GPS chip is searching GPS info. Fast flashing GPS chip has gotten GPS info. ON PWR (Green) Power on and normal. ON USB is connected for configuration. Fast flashing Power low alert Slow flashing TEMP (Green & Red) Temperature is in the normal band. Green light slow flashingTemperature bands alarm event is triggered Red light slow flashing Temperature bands alarm function haven’t been activated. OFF DATA (Green & Red) All the messages are sent to server successfully. Green light slow flashingSome messages are blocked for sending. Red light slow flashing Before getting the send result of the first message. OFF USB is connected as a mass stroage. ON 1‐Fastflashingisabout60msON/780msOFF2‐Slowflashingisabout60msON/1940msOFF SPECIAL STATUS 1. GD100 received RTO command ‘ACT’ from server: TEMP & DATA GREEN lights flash two times together and TEMP & DATA RED lights flash one time together in turn. 2. GD100 received ‘ACT’ command, and user pressed START Button: All LEDs work
GD100UsermanualTRACGD100UM001 ‐10‐normally, and temperature bands alarm monitoring start delay countdown starts. 3. GD100 is in activation state, and STOP Button has been pressed: PWR light will flash fast and TEMP & DATA GREEN will be long on. 4. GD100 enters STOP mode: PWR & GPS & CELL lights will be off, and TEMP & DATA GREEN lights will stay long on. If temperature bands alarm has been triggered, TEMP RED light stays flash slowly. Note:1.InBatterymode(USBisnotconnected),allLEDsareonlyenabledatthefirst5minutesafterpoweronthedevice,andthenwillbeshutdown.IfyouclickStart/StopButton,LEDswillworkanother5minutes.2.TEMPlights’statusdependsonTemperatureBandsAlarm.Whentemperaturebandsalarmeventistriggered,TEMPRedlightwillflashslowlyandstayflashslowly,evenotherLEDsareoffbecause5minutesexpires.2.4. UDISKBufferFileGD100cansavemessagesasbufferdata,andthebufferdatafilewillbestoredonthemassstoragedevice,whichisreadytobedownloaded.Andalso,thedatafilewillbeencryptedbyAES.ThekeyisthedeviceIMEI.
GD100UsermanualTRACGD100UM001 ‐11‐3 .GettingStarted3.1. PartlistName PictureRemarkGD100LocaterTheGSM/GPRS/GPSlocator.3.2. Turnon/Turnoff Turnon:ShifttheToggleSwitchto“ON”,GD100willturnon. Turnoff:ShifttheToggleSwitchto“OFF”,GD100willturnoff.
GD100UsermanualTRACGD100UM001 ‐12‐4 TroubleshootingandSafetyInfo4.1. TroubleshootingTrouble Possible reason Solution After GD100 is turned on, the CELL LED always flashes quickly. The SIM card is not inserted. Please insert the SIM card into GD100. The signal is too weak; GD100 can’t register to the network. Please move GD100 into places with good GSM coverage. Messages can’t be reported to the backend server by GPRS. The SIM card in GD100 doesn’t support GPRS. Try a GPRS supporting SIM card. APN is wrong. Some APNs cannot visit the Internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address on the Internet. Unable to power off GD100. Unable to power off GD100 if charger is connected. Disconnect charger, and try again. No response from configure port when configuring GD100 through USB Driver of GD100 is not installed in computer. Install the USB driver and try again Switch of GD100 is “OFF” Turn on the switch, and plug-in USB port again GD100 can’t get successful GPS fixing. The GPS signal is weak. Please move GD100 to a place with open sky. It is better to let the top surface face the sky. (The same surface with indication LED) 4.2. SafetyInfoPleasedonotdisassemblethedevicebyyourself.Pleasedonotputthedeviceonoverheatingortoohumidplace,andavoidexposuretodirectsunlight.Toohightemperaturewilldamagethedeviceorevencausebattery
GD100UsermanualTRACGD100UM001 ‐13‐explosion.PleasedonotuseGD100ontheairplaneornearmedicalequipment.

Navigation menu