Queclink Wireless Solutions GD100 GSM/GPRS/GPS Tracker User Manual GD100 0506

Queclink Wireless Solutions Co.,Ltd GSM/GPRS/GPS Tracker GD100 0506

UserManual.wiki >

Queclink Wireless Solutions >

GD100 User Manual >

Users Manual HTML Version

Users Manual

GD100Usermanual 



TRACGV3SUM001‐1‐



GD100UserManual

GSM/GPRS/GPSTracker



TRACGD100UM001



Version:R1.02



GD100

GD100UserManual

TRACGD100UM001 ‐2‐

DocumentTitleGD100UserManual

VersionR1.02

Date2016‐02‐22

StatusRelease

DocumentControlIDTRACGD100UM001

GeneralNotes

Queclinkoffersthisinformationasaservicetoitscustomers,tosupportapplicationand

engineeringeffortsthatusetheproductsdesignedbyQueclink.Theinformationprovidedis

baseduponrequirementsspecificallyprovidedtoQueclinkbythecustomers.Queclinkhasnot

undertakenanyindependentsearchforadditionalrelevantinformation,includingany

informationthatmaybeinthecustomer’spossession.Furthermore,systemvalidationofthis

productdesignedbyQueclinkwithinalargerelectronicsystemremainstheresponsibilityofthe

customerorthecustomer’ssystemintegrator.Allspecificationssuppliedhereinaresubjectto

change.

ThisdocumentcontainsproprietarytechnicalinformationwhichisthepropertyofQueclink

WirelessSolutionsCo.,Ltd.Thecopyingofthisdocumentandgivingittoothersandtheusingor

communicationofthecontentsthereof,areforbiddenwithoutexpressauthority.Offendersare

liabletothepaymentofdamages.Allrightsreservedintheeventofgrantofapatentorthe

registrationofautilitymodelordesign.Allspecificationsuppliedhereinaresubjecttochange

withoutnoticeatanytime.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20cm or

more should be maintained between the antenna of this device and persons during operation.

To ensure compliance, operation at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter. Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor

compliancecouldvoidtheuser’sauthoritytooperatetheequipment.

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemust

acceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.



GD100UserManual

TRACGD100UM001 ‐3‐

Contents

Contents............................................................................................................................................3

0RevisionHistory..............................................................................................................................6

1Introduction...................................................................................................................................7

1.1.Reference.............................................................................................................................7

2ProductOverview...........................................................................................................................8

2.1.Appearance.........................................................................................................................8

2.2.Button/Switch/USBInterfaceDescription...........................................................................8

2.3.LEDDescription...................................................................................................................9

2.4.UDISKBufferFile...............................................................................................................10

3.GettingStarted............................................................................................................................11

3.1.Partlist...............................................................................................................................11

3.2.Turnon/Turnoff................................................................................................................11

4TroubleshootingandSafetyInfo..................................................................................................12

4.1.Troubleshooting.................................................................................................................12

4.2.SafetyInfo..........................................................................................................................12

GD100UserManual

TRACGD100UM001 ‐4‐

TableIndex

TABLE1.GD100PROTOCOLREFERENCE........................................................................................7

TABLE2.GD100LEDDESCRIPTIONTABLE......................................................................................9

GD100UserManual

TRACGD100UM001 ‐5‐

FigureIndex

FIGURE1.APPEARANCEOFGD100..................................................................................................8

GD100UserManual

TRACGD100UM001 ‐6‐

0 RevisionHistory

RevisionDateAuthorDescriptionofchange

1.002015‐12‐23DocterXuInitialRelease

1.012016‐01‐07BlackChenModifyPWRLEDdescription

1.022016‐02‐22BlackChenModifyLEDdescription

GV55Usermanual

TRACGD100UM001 ‐7‐

1 Introduction

GD100isapowerfulGPStrackerdesignedforfixedassettrackingapplications.Itworkswith

threeCR123Alithium‐batteriesandwilloperatefor60dayswithreadingdateandreporting

four(4)timesperday.Withbuilt‐intemperaturesensor,GD100willdetecttheoutside

temperatureandtriggerwarningmessageswhenoutsidetemperatureisoutofoperating

temperatureranges‐20℃‐85℃.Andalso,GD100supportslightdetectionandcantriggereven

messagesbylightsensor.Basedintegrated@trackprotocol,theGD100cancommunicatewitha

backendserverthroughtheGPRS/GSMnetworktotransferreportsofemergency,geo‐fence

boundarycrossings,lowbatteryorscheduledGPSpositionalongwithmanyotheruseful

functions.SystemIntegratorscaneasilysetuptheirtrackingsystemsbasedonthefull‐featured

@Trackprotocol.

Table1. GD100ProtocolReference

SNDocumentnameRemark

[1]GD100@TrackAirInterfaceProtocolTheairprotocolinterfacebetween

GD100andbackendserver.

1.1. Reference

GV55Usermanual

TRACGD100UM001 ‐8‐

2 ProductOverview

Figure1. AppearanceofGD100

2.2. Button/Switch/USBInterfaceDescription

USB Port/Power Switch Description

START/STOP Button Start: When START button is pressed

after received real time command

‘ACT’, the device enters start

countdown mode.

Stop: When STOP button is pressed,

the device will not monitor temperature

anymore. At this stage, DATA light and

TEMP light will turn green and be solid

on, and other lights will work normally.

After all the recorded messages are

sent out to server, DATA green light

and TEMP Green light will be solid on

and the other lights will be off, which

means the recording has stopped

working.

2.1. Appearance

1313

GD100Usermanual

TRACGD100UM001 ‐9‐

USB Port  If the battery switch is on, it will work as

a serial port for configuration.

 If battery switch is off, it will work as a

mass storage.

Note:

If you want to change work mode of USB,

you need to reboot the device.

Toggle Switch  Turn on GD100 when switch to “ON”.

 Turn off GD100 when switch to “OFF”.

2.3. LEDDescription

There are five LEDs on GD100, the description as follows.

Table2. GD100LEDDescriptionTable

LED Device status LED status

CELL

(Green)

Device is searching GSM network. Fast flashing

Device has registered to GSM network. Slow flashing

SIM card needs pin code to unlock. ON

Receive a valid protocol command. Keep on for 3 seconds

GPS

(Green)

GPS chip is powered off. OFF

GPS sends no data or data format error. Slow flashing

GPS chip is searching GPS info. Fast flashing

GPS chip has gotten GPS info. ON

PWR

(Green)

Power on and normal. ON

USB is connected for configuration. Fast flashing

Power low alert Slow flashing

TEMP

(Green &

Red)

Temperature is in the normal band. Green light slow flashing

Temperature bands alarm event is triggered Red light slow flashing

Temperature bands alarm function haven’t

been activated.

OFF

DATA

(Green &

Red)

All the messages are sent to server

successfully.

Green light slow flashing

Some messages are blocked for sending. Red light slow flashing

Before getting the send result of the first

message.

OFF

USB is connected as a mass stroage. ON

1‐Fastflashingisabout60msON/780msOFF

2‐Slowflashingisabout60msON/1940msOFF

SPECIAL STATUS

1. GD100 received RTO command ‘ACT’ from server: TEMP & DATA GREEN lights

flash two times together and TEMP & DATA RED lights flash one time together in turn.

2. GD100 received ‘ACT’ command, and user pressed START Button: All LEDs work

TRACGD100UM001 ‐10‐

normally, and temperature bands alarm monitoring start delay countdown starts.

3. GD100 is in activation state, and STOP Button has been pressed: PWR light will flash

fast and TEMP & DATA GREEN will be long on.

4. GD100 enters STOP mode: PWR & GPS & CELL lights will be off, and TEMP & DATA

GREEN lights will stay long on. If temperature bands alarm has been triggered, TEMP

RED light stays flash slowly.

Note:

1.InBatterymode(USBisnotconnected),allLEDsareonlyenabledatthefirst5minutesafter

poweronthedevice,andthenwillbeshutdown.IfyouclickStart/StopButton,LEDswillwork

another5minutes.2.TEMPlights’statusdependsonTemperatureBandsAlarm.When

temperaturebandsalarmeventistriggered,TEMPRedlightwillflashslowlyandstayflashslowly,

evenotherLEDsareoffbecause5minutesexpires.



2.4. UDISKBufferFile

GD100cansavemessagesasbufferdata,andthebufferdatafilewillbestoredonthemass

storagedevice,whichisreadytobedownloaded.Andalso,thedatafilewillbeencryptedbyAES.

ThekeyisthedeviceIMEI.



TRACGD100UM001 ‐11‐

3 .GettingStarted

3.1. Partlist

Name PictureRemark

GD100Locater



TheGSM/GPRS/GPSlocator.



3.2. Turnon/Turnoff

 Turnon:ShifttheToggleSwitchto“ON”,GD100willturnon.

 Turnoff:ShifttheToggleSwitchto“OFF”,GD100willturnoff.

GD100Usermanual

TRACGD100UM001 ‐12‐

4 TroubleshootingandSafetyInfo

4.1. Troubleshooting

Trouble Possible reason Solution

After GD100 is turned on, the CELL LED

always flashes quickly.

The SIM card is not

inserted.

Please insert the SIM

card into GD100.

The signal is too weak;

GD100 can’t register to

the network.

Please move GD100 into

places with good GSM

coverage.

Messages can’t be reported to the backend

server by GPRS.

The SIM card in

GD100 doesn’t support

GPRS.

Try a GPRS supporting

SIM card.

APN is wrong. Some

APNs cannot visit the

Internet directly.

Ask the network operator

for the right APN.

The IP address or port

of the backend server is

wrong.

Make sure the IP address

for the backend server is

an identified address on

the Internet.

Unable to power off GD100. Unable to power off

GD100 if charger is

connected.

Disconnect charger, and

try again.

No response from configure port when

configuring GD100 through USB

Driver of GD100 is not

installed in computer.

Install the USB driver

and try again

Switch of GD100 is

“OFF”

Turn on the switch, and

plug-in USB port again

GD100 can’t get successful GPS fixing. The GPS signal is

weak.

Please move GD100 to a

place with open sky.

It is better to let the top

surface face the sky. (The

same surface with

indication LED)

4.2. SafetyInfo

Pleasedonotdisassemblethedevicebyyourself.

Pleasedonotputthedeviceonoverheatingortoohumidplace,andavoidexposureto

directsunlight.Toohightemperaturewilldamagethedeviceorevencausebattery

GD100Usermanual

TRACGD100UM001 ‐13‐

explosion.

PleasedonotuseGD100ontheairplaneornearmedicalequipment.

Queclink Wireless Solutions GD100 GSM/GPRS/GPS Tracker User Manual GD100 0506

Queclink Wireless Solutions Co.,Ltd GSM/GPRS/GPS Tracker GD100 0506

Contents

Users Manual

Navigation menu

Namespaces

Views

Navigation