Queclink Wireless Solutions GD100 GSM/GPRS/GPS Tracker User Manual GD100 0506

Download:
Mirror Download [FCC.gov]
Document ID	3009514
Application ID	ku64iRoJTNXHtNtd/rWtYQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.44kB (955526 bits)
Date Submitted	2016-05-30 00:00:00
Date Available	2016-05-30 00:00:00
Creation Date	2016-05-06 16:52:10
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-05-30 19:40:53
Document Title	Microsoft Word - GD100 User manual 0506
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh94

GD100
User manual
GD100 User Manual
GSM/GPRS/GPS Tracker
TRACGD100UM001
Version:R1.02
GD100
TRACGV3SUM001
‐1‐
GD100 User Manual
Document Title
GD100 User Manual
Version
R1.02
Date
2016‐02‐22
Status
Release
Document Control ID
TRACGD100UM001
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has not
undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of the
customer or the customer’s system integrator. All specifications supplied herein are subject to
change.
Copyright
This document contains proprietary technical information which is the property of Queclink
Wireless Solutions Co., Ltd. The copying of this document and giving it to others and the using or
communication of the contents thereof, are forbidden without express authority. Offenders are
liable to the payment of damages. All rights reserved in the event of grant of a patent or the
registration of a utility model or design. All specification supplied herein are subject to change
without notice at any time.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20cm or
more should be maintained between the antenna of this device and persons during operation.
To ensure compliance, operation at closer than this distance is not recommended.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
TRACGD100UM001
‐2‐
GD100 User Manual
Contents
Contents ............................................................................................................................................ 3
0 Revision History .............................................................................................................................. 6
1 Introduction ................................................................................................................................... 7
1.1. Reference............................................................................................................................. 7
2 Product Overview ........................................................................................................................... 8
2.1. Appearance ......................................................................................................................... 8
2.2. Button/Switch/USB Interface Description ........................................................................... 8
2.3. LED Description ................................................................................................................... 9
2.4. UDISK Buffer File ............................................................................................................... 10
3 .Getting Started ............................................................................................................................ 11
3.1. Part list............................................................................................................................... 11
3.2. Turn on/Turn off ................................................................................................................ 11
4 Troubleshooting and Safety Info .................................................................................................. 12
4.1. Troubleshooting ................................................................................................................. 12
4.2. Safety Info .......................................................................................................................... 12
TRACGD100UM001
‐3‐
GD100 User Manual
Table Index
TABLE 1.
GD100 PROTOCOL REFERENCE ........................................................................................ 7
TABLE 2.
GD100 LED DESCRIPTION TABLE ...................................................................................... 9
TRACGD100UM001
‐4‐
GD100 User Manual
Figure Index
FIGURE 1.
APPEARANCE OF GD100 .................................................................................................. 8
TRACGD100UM001
‐5‐
GD100 User Manual
0 Revision History
Revision
Date
Author
Description of change
1.00
2015‐12‐23
Docter Xu
Initial Release
1.01
2016‐01‐07
Black Chen
Modify PWR LED description
1.02
2016‐02‐22
Black Chen
Modify LED description
TRACGD100UM001
‐6‐
GV55 User manual
1 Introduction
GD100 is a powerful GPS tracker designed for fixed asset tracking applications. It works with
three CR123A lithium‐batteries and will operate for 60days with reading date and reporting
four(4) times per day. With built‐in temperature sensor, GD100 will detect the outside
temperature and trigger warning messages when outside temperature is out of operating
temperature ranges ‐20℃‐85℃. And also, GD100 supports light detection and can trigger even
messages by light sensor. Based integrated @track protocol, the GD100 can communicate with a
backend server through the GPRS/GSM network to transfer reports of emergency, geo‐fence
boundary crossings, low battery or scheduled GPS position along with many other useful
functions. System Integrators can easily setup their tracking systems based on the full‐featured
@Track protocol.
1.1. Reference
Table 1. GD100 Protocol Reference
SN
Document name
Remark
[1]
GD100 @Track Air Interface Protocol
The air protocol interface between
GD100 and backend server.
TRACGD100UM001
‐7‐
GV55 User manual
2 Product Overview
2.1. Appearance
1313
Figure 1. Appearance of GD100
2.2. Button/Switch/USB Interface Description
USB Port/Power Switch Description
START/STOP Button


TRACGD100UM001
Start: When START button is pressed
after received real time command
‘ACT’, the device enters start
countdown mode.
Stop: When STOP button is pressed,
the device will not monitor temperature
anymore. At this stage, DATA light and
TEMP light will turn green and be solid
on, and other lights will work normally.
After all the recorded messages are
sent out to server, DATA green light
and TEMP Green light will be solid on
and the other lights will be off, which
means the recording has stopped
working.
‐8‐
GD100 User manual
USB Port

Toggle Switch


If the battery switch is on, it will work as
a serial port for configuration.
 If battery switch is off, it will work as a
mass storage.
Note:
If you want to change work mode of USB,
you need to reboot the device.
Turn on GD100 when switch to “ON”.
Turn off GD100 when switch to “OFF”.
2.3. LED Description
There are five LEDs on GD100, the description as follows.
Table 2. GD100 LED Description Table
LED
Device status
LED status
CELL
(Green)
Device is searching GSM network.
Fast flashing
Device has registered to GSM network.
Slow flashing
SIM card needs pin code to unlock.
ON
Receive a valid protocol command.
Keep on for 3 seconds
GPS chip is powered off.
OFF
GPS sends no data or data format error.
Slow flashing
GPS chip is searching GPS info.
Fast flashing
GPS chip has gotten GPS info.
ON
Power on and normal.
ON
USB is connected for configuration.
Fast flashing
Power low alert
Slow flashing
Temperature is in the normal band.
Green light slow flashing
Temperature bands alarm event is triggered
Red light slow flashing
Temperature bands alarm function haven’t
been activated.
OFF
All the messages
successfully.
Green light slow flashing
GPS
(Green)
PWR
(Green)
TEMP
(Green
Red)
DATA
(Green
Red)
are
sent
to
server
Some messages are blocked for sending.
Red light slow flashing
Before getting the send result of the first
message.
OFF
USB is connected as a mass stroage.
ON
1 ‐ Fast flashing is about 60ms ON/ 780ms OFF
2 ‐ Slow flashing is about 60ms ON/ 1940ms OFF
SPECIAL STATUS
1. GD100 received RTO command ‘ACT’ from server: TEMP & DATA GREEN lights
flash two times together and TEMP & DATA RED lights flash one time together in turn.
2. GD100 received ‘ACT’ command, and user pressed START Button: All LEDs work
TRACGD100UM001
‐9‐
GD100 User manual
normally, and temperature bands alarm monitoring start delay countdown starts.
3. GD100 is in activation state, and STOP Button has been pressed: PWR light will flash
fast and TEMP & DATA GREEN will be long on.
4. GD100 enters STOP mode: PWR & GPS & CELL lights will be off, and TEMP & DATA
GREEN lights will stay long on. If temperature bands alarm has been triggered, TEMP
RED light stays flash slowly.
Note:
1. In Battery mode (USB is not connected), all LEDs are only enabled at the first 5 minutes after
power on the device, and then will be shut down. If you click Start/Stop Button, LEDs will work
another 5 minutes.2. TEMP lights’ status depends on Temperature Bands Alarm. When
temperature bands alarm event is triggered, TEMP Red light will flash slowly and stay flash slowly,
even other LEDs are off because 5 minutes expires.
2.4. UDISK Buffer File
GD100 can save messages as buffer data, and the buffer data file will be stored on the mass
storage device, which is ready to be downloaded. And also, the data file will be encrypted by AES.
The key is the device IMEI.
TRACGD100UM001
‐ 10 ‐
GD100 User manual
3 .Getting Started
3.1. Part list
Name
GD100 Locater
Picture
Remark
The GSM/GPRS/GPS locator.
3.2. Turn on/Turn off
 Turn on: Shift the Toggle Switch to “ON”, GD100 will turn on.
 Turn off: Shift the Toggle Switch to “OFF”, GD100 will turn off.
TRACGD100UM001
‐ 11 ‐
GD100 User manual
4 Troubleshooting and Safety Info
4.1. Troubleshooting
Trouble
Possible reason
Solution
After GD100 is turned on, the CELL LED
always flashes quickly.
The SIM card is not
inserted.
Please insert the SIM
card into GD100.
The signal is too weak;
GD100 can’t register to
the network.
Please move GD100 into
places with good GSM
coverage.
The SIM card in
GD100 doesn’t support
GPRS.
Try a GPRS supporting
SIM card.
APN is wrong. Some
APNs cannot visit the
Internet directly.
Ask the network operator
for the right APN.
The IP address or port
of the backend server is
wrong.
Make sure the IP address
for the backend server is
an identified address on
the Internet.
Unable to power off GD100.
Unable to power off
GD100 if charger is
connected.
Disconnect charger, and
try again.
No response from configure port when
configuring GD100 through USB
Driver of GD100 is not
installed in computer.
Install the USB driver
and try again
Switch of GD100 is
“OFF”
Turn on the switch, and
plug-in USB port again
The GPS signal is
weak.
Please move GD100 to a
place with open sky.
Messages can’t be reported to the backend
server by GPRS.
GD100 can’t get successful GPS fixing.
It is better to let the top
surface face the sky. (The
same surface with
indication LED)
4.2. Safety Info
 Please do not disassemble the device by yourself.
 Please do not put the device on overheating or too humid place, and avoid exposure to
direct sunlight. Too high temperature will damage the device or even cause battery
TRACGD100UM001
‐ 12 ‐
GD100 User manual
explosion.
 Please do not use GD100 on the airplane or near medical equipment.
TRACGD100UM001
‐ 13 ‐

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Creator                         : baclsh94
Title                           : Microsoft Word - GD100 User manual 0506
Create Date                     : 2016:05:06 16:52:10+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:05:30 19:40:53+08:00
Metadata Date                   : 2016:05:30 19:40:53+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:cfbb0058-aae1-4bd7-a9b5-9101b1189dac
Instance ID                     : uuid:a993264a-2c32-462e-91d2-b4f5880f84f9
Has XFA                         : No
Page Count                      : 13
Author                          : baclsh94

EXIF Metadata provided by EXIF.tools