Quectel Wireless Solutions 201607EC25V LTE Module User Manual

Quectel Wireless Solutions Company Limited LTE Module

User manual

Rugged Handheld Computer - PA730 - User's ManualVersion 1.1 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
© 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Revision History Date Change Description Version 2017/9/26 first published version 1.0 2017/10/13 Update photos Update spec info. 1.1
Preface About This Manual Thank you for purchasing the unitech product. This manual explains how to install, operate and maintain our product. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing from the manufacturer. The material in this manual is subject to change without notice. Regulatory Compliance Statements FCC Warning Statement i © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. 1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure requirements, avoid direct contact to the transmitting antenna during transmitting. 3. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. Operation on the 5.15 - 5.25GHz frequency band is restricted to indoor use only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725–5.850 GHz band when associated with an access point (AP). FCC Label Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
i © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Hearing Aid Compatibility Information The FCC has adopted hearing aid compatibility (HAC) rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2007 or C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains the below rating: An “ M “ rating for reduced radio frequency interference to enable acoustic coupling with hearing aids that are not operating in telecoil mode. These rating are given on a scale form one to four, where four is the most compatible. A phone is considered hearing aid compatible under FCC rules if it is rated M4 for acoustic coupling. Hearing aid compatibility ratings don't guarantee that a particular hearing aid works with a particular phone. Some hearing aids might work well with phones that don’t meet particular ratings. To ensure interoperability between a hearing aid and a phone, try using them together before purchase. This phone has been tested and rated for use with hearing aids for some of the wireless technologies it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine id you hear any interfering noise. Consult your carrier or Unitech for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your carrier or phone retailer. RF Radiation Exposure Statement For body contact during operation, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Canadian Compliance Statement This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the RED 2014/53/EU directive, the EMC 2014/30/EU directive and the Low Voltage 2014/35/EU directive. The declaration of conformity is available for download at : https://portal.unitech.eu/public/Safetyregulatorystatement CE RF Exposure Compliance This device meets EU requirements (2014/53/EU) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories, SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines. CE Mark Warning This equipment complies with the requirements of Directive 2014/53/EU of the European Parliament and Commission from 24 May, 2014 governing Radio and Telecommunications Equipment and mutual recognition of conformity. The highest CE SAR values for the device are as follows : 0.776 W/kg @ 10g (Head) ii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
iii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1.400 W/kg @ 10g (Body) RoHS Statement This device conforms to RoHS (Restriction Of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. Waste electrical and electronic equipment (WEEE) unitech has set up a policy and process to meet the EU directive 2002/96/EC and update 2003/108/EC concerning electronic waste disposal. For more detailed information of the electronic waste disposal of the products you have purchased from unitech directly or via unitech’s resellers, you shall either contact your local supplier or visit us at : https://portal.unitech.eu/public/WEEE
iv © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Taiwan NCC Warning Statement 低功率電波輻射性電機管理辦法 第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備 之干擾。 注意事項: 1. 使用過度恐傷害視力。 2. 使用30分鐘請休息10分鐘；2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過 1小時。 3. 減少電磁波影響，請妥適使用。
Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 60825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that there is no human access to harmful laser light during normal operation, user maintenance or prescribed service operations. The laser safety warning label required by the DHHS/IEC for the unitech product’s optional laser scanner module is located on the memory compartment cover, on the back of the unit. * Laser information only applies to the products with laser components. CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light. Use of optical instruments with the scanner, including binoculars, microscopes, and magnifying glasses, with will increase eye damage. This does not include eyeglasses worn by the user. LED Information The unitech product contains LED indicator(s) or LED ring whose luminance is not harmful to human eyes during normal operation, user maintenance or prescribed service operations. *LED information only applies to the products with LED components. v © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Battery Notice 1. To guarantee optimal performance, it is recommended that rechargeable batteries be replaced every year, or after 500 charging cycles are completed. It is normal for the battery to balloon or expand after one year or 500 cycles. Although it does not cause damage, it cannot be used again and must be disposed of according to the location's safe battery disposal procedures. 2. If a battery performance decreases more than 20%, the battery is at the end of its life cycle. Stop use and ensure the battery is disposed of properly. 3. The length of time that a battery lasts depends on the battery type and how the device is used. Conserve the battery life by doing the following:  Avoid fully uncharging the battery because this places additional strain on it. Several partial uncharges with frequent charges are better than a fully uncharged battery. Charging a partially charged battery does not cause harm to the unit.  Keep the battery cool. Avoid hot vehicles. For prolonged storage, keep the battery at a 40% charge level.  Do not leave the battery uncharged and unused for an extended period of time, the battery will wear out and the longevity of the battery will be at least half of one with frequent charges. 4. Protect battery life by not over or under charging the battery. 5. Please do not leave battery unused for long time without charging it. Despite unitech’s safety precautions, the battery pack may begin to change shape. If so, stop using it immediately. Please check to see if you are using a proper power adapter to charge the battery or contact your service provider for service. 6. If you cannot charge the battery after it has been idle for an extended period of time and it begins to heat up, please do not try to charge it. It may not be functional anymore. 7. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by unitech’s warranty policy. vi © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
vii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.  RISK OF EXPLOSION IF BATTERY IS REPLACED INCORRECTLY. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.  如果更換不正確之電池會有爆炸的風險 請依製造商說明書處理用過之電池 CAUTION!  如果更换不正确之电池会有爆炸的风险 请依制造商说明书处理用过之电池 Battery charge notice It is important to consider temperature when the battery pack is charging. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their life cycle. CAUTION! Do not charge batteries at a temperature lower than 0°C. This will make the batteries unstable and dangerous. Please use a battery temperature detecting device for a charger to ensure a safe charging temperature range. CAUTION! To ensure the unit working properly, please keep all connectors away from the contaminants staying inside of them such as dust, grease, mud, and water. The negligence may cause the unit with no communication, short circuited, overheated and so on. CAUTION! If the connector is damaged, please ensure the connector is being fully repaired before use the unit to avoid causing short circuited.
Storage and safety notice Although charged batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens, they will require recharging prior to use. Batteries may be stored at temperatures between -20°C to 60°C, however they may deplete more rapidly at higher temperatures. It is recommended to store batteries at room temperature. * The message above only applies to the usage of the removable batteries. For the products with non-removable batteries / without batteries, please refer to the specification of each product. Product Operation and Storage Notice The unitech product has applicable operation and storage temperature conditions. Please follow the limitation of suggested temperature conditions to avoid failure, damage or malfunction. *For applicable temperature conditions, please refer to the specification of each product. Adapter Notice 1. Please do not leave the power adapter in the socket when it is not connected to your unitech product for charging. 2. Please remove the power adapter when the battery is fully recharged. 3. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product. 4. Please only use the bundled power adapter or same specification of adapter to charge your unitech product. Using the wrong power adapter can damage your unitech product. * The message above only applies to the product connected to the adapter. For the products without using the adapters, please refer to the specification of each product. viii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Hearing Damage Warning Zx.3 Warning The warning shall be placed on the equipment, or on the packaging, or in the instruction manual and shall consist of the following: - the symbol of Figure 1 with a minimum height of 5 mm; and - the following wording, or similar : To prevent possible hearing damage, do not listen at high volume levels for long periods. Alternatively, the entire warning may be given through the equipment display during use, when the user is asked to acknowledge activation of the higher level. ix © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan – Headquarters Europe Tel: +886-2-89121122 Tel: +31-13-4609292 E-mail: info@hq.ute.com E-mail: info@eu.ute.com Address: 5F, No. 136, Lane 235, Baoqiao Road, Xindian District, New Taipei City 231, Taiwan (R.O.C.) Address: Kapitein Hatterasstraat 19, 5015 BB, Tilburg, the Netherlands xii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Website: http://www.ute.com Website: http://eu.ute.com China Japan Tel: +86-59-2310-9966 Tel: +81-3-35232766 E-mail: info@cn.ute.com E-mail: info@jp.ute.com Address: Website: Room401C, 4F, RIHUA International Mansion, Xinfeng 3nd Road, Huoju Hi-tech District, Xiamen, Fujan , China http://cn.ute.com Address:Website:Kayabacho Nagaoka Building 8F.,1-5-19 Shinkawa, Chuo-Ku, Tokyo, 104-0033, Japan http://jp.ute.com Asia & Pacific / Middle East Latin America Tel: +886-2-27911556 Tel: +52-55-5171-0528 E-mail: info@apac.ute.com info@india.ute.com info@mideast.ute.com E-mail:Address:info@latin.ute.com 17171 Park Row, Suite 210 Houston, TX 77084USA (Rep.) Address: 4F., No. 236, ShinHu 2nd Rd., NeiHu Chiu, 114, Taipei,Taiwan Website: http://latin.ute.com Website: http://apac.ute.com / http://mideast.ute.com North America Please scan QR Code to visit us : Tel: +1-714-8916400 E-mail: Address: Website: info@us.ute.com / info@can.ute.com 6182 Katella Ave, Cypress, CA 90630, USA http://us.ute.com
Warranty Policy The following items covered under the unitech Limited Warranty are free from defects during normal use: The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user. xiii © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Table of Contents Preface.............................................................................................................i Regulatory Compliance Statements ..............................................................i Laser Information ......................................................................................... v LED Information ........................................................................................... v Battery Notice.............................................................................................. vi Adapter Notice............................................................................................viii Hearing Damage Warning........................................................................... ix Worldwide Support..................................................................................... xii Warranty Policy ..........................................................................................xiii Chapter 1 - Overview................................................................................1 1.1 Package .................................................................................................1 1.2 Product Detail.........................................................................................2 1.3 Specifications .........................................................................................5 1.4 Getting Started .......................................................................................9 Chapter 2 – Installation & Operation.................................................14 2.1 Barcode Setting....................................................................................14 2.2 HF Setting ............................................................................................19 2.3 UHF Setting..........................................................................................20 2.4 MSR Setting .........................................................................................20 2.5 WWAN Setting......................................................................................21 2.6 WLAN Setting.......................................................................................23 2.7 PAN Setting..........................................................................................24 2.8 GPS Setting..........................................................................................25 2.9 PC Setting ............................................................................................27 2.10 Camera Setting ..................................................................................29 2.11 Performing a Hardware Reset ............................................................32 2.12 Performing Factory Data Reset..........................................................33 2.13 Programmable Keys...........................................................................34 xiv © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.14 Battery Swap......................................................................................36
xv © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Chapter 3 – Introduction to Applications.........................................37 3.1 Scan Service ........................................................................................37 3.2 File Manager ........................................................................................40 3.3 Update Center......................................................................................41 3.4 Sound Recorder ...................................................................................42 3.5 Push To Talk .........................................................................................44 3.6 MoboLink..............................................................................................45 3.7 SOTI.....................................................................................................49
PA730 User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the PA730 gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents  PA730 Terminal  Battery  Hand Strap  Quick Start Guide  USB Cable (with two special ferrite cores )  the special USB cable must be used with this device  Power Adapter ( EU or US )  Regulatory Compliance Statements 1 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 1.2 Product Detail PA730 Front View 1Front camera 6Camera button 2Logo 7Speaker 3Back key 8Light sensor 4Home key 9LED 5Menu key 2 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual PA730 Rear View 3 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1 Battery pin 5 Hand strap hook 2 6 Back camera SIM card slot 3 Micro SD card slot 7Flash LED 4 Battery cover lock switch
PA730 User’s Manual PA730 Left and Right View 1 Ear phone jack 5 Scan button 2 Scan button 6 Volume up 3 Function Key 7 Volume down 4 Power button 8 USB connect 4 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 1.3 Specifications System Features Processor Qualcomm APQ8052(617) ARM A53 64 bits CPU Quad Core*1.5Ghz &Quad Core*1.2Ghz Memory 16GB eMMC Flash ROM plus 2GB LPDDR3 RAM Expanded slot One user accessible Micro SD Memory Slot One user accessible SIM slot Display 5.0”, Color FHD Capacitive type 5 points multi-touch touch panel with Gorilla Glass Support finger, glove and stylus FHD(full high definition):1920 x 1080 (1080P) Brightness: 500cd/m2 (nits) Transmissive type TFT LCD Keypad Front Key :Standard Android 3 keys(touch key together with touch panel) and one function key. Side Key : Scan key left and right., volume key up and down, power key and function key. Indicator 2 x LED indicators for charging LED & information LED. One vibrator for scan or ring in indication Audio tone indication Engines 2D Imager engine (SE 4750) 1D All major codes 2D：PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode, Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal Dutch Postal (KIX) Audio Dual speaker One receiver and dual noise-cancelling microphones 3.5mm DIA stereo headset jack with MIC. In 5 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
6 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual External Connector One user accessible micro SD Memory slot with SDHC, SDXC compliance and software image upgrade features One user accessible Micro SIM slot Micro USB (B type) support USB 2.0 OTG and USB charge Cradle connector support USB 2.0 and DC power input Software MoboLink, SOTI Regulatory Approvals CE, FCC, RoHS compliance ￭ FCC certification : Max 1g Reported Head SAR (W/kg) 0.46 Max 1g Reported Body SAR (W/kg) 0.39 Limit: 1.60 W/kg Max Product specific 10g Reported Body SAR (W/kg) 0.32 Limit: 4.00 W/kg Max Reported 1g Simultaneous Transmission SAR (W/kg) 0.97 Limit: 1.60 W/kg Distance (mm) 10 Verdict PASS Communication USB USB 2.0 OTG WLAN 802.11a/b/g/n/ac Wireless LAN, 2.4GHz and 5GHz Compliant with WEP, WPA and IEEE 802.11i WPA2 Fast roaming under 100ms Enterprise security PAN Bluetooth 4.1 LE Support profile : HID, A2DP, OPP, SPP WWAN (Option)  Europe: FDD LTE: B1/B3/B5/B7/B8/B20 TDD LTE: B38/B40/B41 WCDMA: B1/B5/B8 GSM: 900/1800  North America-Verizon FDD LTE: B4/B13 GPS GPS/GLONASS (Only for WAN model)
PA730 User’s Manual NFC ISO14443-4 (Type A, Type B), ISO15693 Mifare, Felica(ISO/IEC18092) Camera and Flash Light NFC location is on the battery cover. Rear camera: 16M pixels CMOS color camera with autofocus Front camera: 5.0M pixels CMOS color camera LED flash light with torch Sensors Accelerometer, Light sensor, Proximity sensor Gyroscope, E-compass Power Source Battery Replaceable Main Battery : 3.7V, typ. 2960mAh Li-Ion battery pack(standard), typ. 5920mAh (extended) One rechargeable RTC backup battery One rechargeable backup battery for battery swap Power Adapter 100~240Vac, 50/60Hz Input 5V, 2A / 9V, 2A output Enclosure Weight Approximately 340g with standard battery Dimension Approximately 158 X 77 X 16.9 mm Environmental Operating temperature -4°F to 122°F (-20°C to 50°C) Storage temperature -22°F to 140°F (-30°C to 60°C) (without Battery) 10% ~ 90% ( non-condensing )Relative Humidity 1.8m MIL-STD 810G Drop test to Concrete Environmental Sealing IP67 & IP65 standard ESD +/-8KV direct discharge, +/-15KV air discharge Tumble 0.5m tumbles for 300 cycles and 600 drops Operating System Android 6.0 7 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
8 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual Radio Type Description Frequency Maximum Output Bluetooth BR+EDR 2400~2483.5 MHz 4dBm Bluetooth Bluetooth 4.0-LE 2400~2483.5 MHz 4dBm 2.4GHz 2400~2483.5 MHz 17dBm 5150~5350 MHz 21dBm WLAN 5GHz 5470~5725 MHz 22dBm GSM 900 880~915 MHz 33dBm GSM GSM 1800 1710~1785 MHz 30.5dBm WCDMA Band I 1920~1980 MHz 24dBm WCDMA WCDMA Band VIII 880~915 MHz 24dBm LTE Band 1 1920~1980 MHz 23.5dBm LTE Band 3 1710~1785 MHz 23dBm LTE Band 5 824MHz~849MHz 23dBm LTE Band 7 2500~2570 MHz 23dBm LTE Band 8 880~915 MHz 23dBm LTE Band 20 832~862 MHz 23dBm LTE Band 38 2570~2620 MHz 23dBm LTE Band 40 2300~2400 MHz 23dBm LTE LTE Band 41 2496MHz~2690MHz 23dBm NFC 13.56 MHz Other GPS 1575.42 MHz NOTE : Requirements in AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR. 5150MHz~5350MHz is for indoor use only.
9 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 1.4 Getting Started 1.4.1 Installing The Battery 1. Press and push the hand hook to loosen or move the hand strap from PA730. 2. Push up the battery cover switch to unlock, and remove battery cover from top.
PA730 User’s Manual 3. Insert the battery pack, and the put back the battery cover. 4. Push down the battery cover switch to lock the cover. NOTE: After installing the battery, make sure the battery cover is securely closed, or you may be unable to turn ON the terminal. WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area. 10 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 1.4.2 Charging The Battery Before you turn on and start using this device, it is recommended that you charge the battery. If the battery has been discharged for several days, you may need to charge for several minutes before powering it on. Use only the adapter and the USB cable that came with this device to charge the battery. When the battery power is too low, make sure to use the power adapter or put into the dock to charge, not the USB cable connection with your computer. ￭ Charge with USB ￭ Charge with cradle 11 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 1.4.3 Turning On The Terminal For The First time After you have initially charged your device for about 24 hours, the device is ready to be used. You can now start up your device. You can then set up the languages, WiFi setting, and date and time. Power-On Button Turn ON your device by pressing the power button of the terminal. 1.4.4 Checking The LED Status Status LED Description Blue light Message received Message Blue light Miss called 12 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Red light Being charged Terminal Green light Fully charged Power Orange light Quick charged Checking the battery status If the battery level becomes low in the course of normal use, a status icon appears on the device screen indicating low or very low battery status. In both cases, connect PC with USB to back up your data, and then recharge your device as soon as possible.
PA730 User’s Manual 1.4.5 Using The SD/SIM Card The PA730 has SD/SIM card slots inside the battery compartment. Inserting a SD/SIM card 1. Remove the battery cover and battery pack. 2. Insert the SD card to the left slot. 3. Insert the SIM card to the right slot. 4. Insert the battery pack and battery cover. 5. Push down the battery cover switch to lock the cover. 13 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual Chapter 2 – Installation & Operation 2.1 Barcode Setting 14 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, then tap ScanService. 2. You are now enter the ScanService application. There are three main items : Settings, Test and Version. 2.1.1 Settings Tap the default barcode symbologies for a different application
PA730 User’s Manual  For Save / Load Settings, and Factory Default section, To save data, Please tap and then tap Save / Load Settings. 15 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Please tap Save Settings – input path - OK
PA730 User’s Manual The save setting data is stored in File Manager. (Please see 3.2 File Manager ) 16 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
17 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 2.1.2 Test Scanned data information 21 Tap ① Choose the path and filename to ②save the scanned data.
PA730 User’s Manual Version Show the recent version of ScanService. Tab to update Scanservice manually. 18 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 2.2 HF Setting 19 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings and then under Wireless & networks, tap More… 2. Tap NFC check box to Enable / disable NFC function. 3. If enable / disable NFC check box, it will also enable / disable Android Beam too. 4. Make sure that both devices are unlocked and have NFC turned on. If the other device has an Android Beam option, make sure it is also turned on. 5. Make sure that the NFC area (shaded part) of PA730 and the other phone's NFC area are close to one another. Experiment by slightly moving the phones until a connection is made. Tap the screen.
PA730 User’s Manual 2.3 UHF Setting Current model is not available. 2.4 MSR Setting Current model is not available. 20 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 2.5 WWAN Setting 1. Turn off the terminal to insert the SIM card. Note :  For the instruction, please refer to 1.4.5 Using the Micro SD/SIM Card.  It only applies to the device which supports WWAN. 2. Turn on the terminal, 4G signal will show at the top of the screen. If you insert 3G SIM card into PA730, the icon is displayed on the status bar. 2.5.1 Mobile Network Settings 21 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings. Go to Wireless & networks, Tap More, and tap Cellular networks.
PA730 User’s Manual 2. You can have more Cellular network settings in this section. For network type, please tap Preferred network type. 22 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 2.6 WLAN Setting 23 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings and then go to Wireless & networks, Tap WLAN. 2. To see available networks, turn Wi-Fi ON. And tap to choose the available networks. 3. Choose the available networks, and enter the Password and tap Connect. 4. If the wireless network that you want is not listed, tap + to manually add it. 5. When enabled, the Wi-Fi icon is displayed on the status bar.
PA730 User’s Manual 2.7 PAN Setting 24 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings. 2. Select Bluetooth from Wireless & Networks. 3. Tap the Bluetooth tile to turn Bluetooth on. 4. Tap the Bluetooth to see a list of available devices. 5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to find the passcode. 6. When enabled, the Bluetooth icon is displayed in the status bar. When the Bluetooth device is connected, you'll see in the status bar. Normally, you can easily reconnect your device by switching on Bluetooth on PA730, and then turning on the device. However, you might have to connect manually if PA730 has been used with another Bluetooth device.
PA730 User’s Manual 2.8 GPS Setting 25 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings. 2. Go to PERSONAL , Tap Location. 3. Tap ON/OFF for the permission to use your location information.
PA730 User’s Manual 4. Tap Mode for more location mode settings. 26 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. ￭ High accuracy : Use GPS, Wi-Fi and cellular networks to determine location ￭ Battery saving : Use Wi-Fi and cellular networks to determine location ￭ Device only : Use GPS to determine location
PA730 User’s Manual 2.9 PC Setting You can transfer your file from or to your computer. The OS of host side please use Windows 7 or upper. 1. Connect PA730 to your computer with the USB cable. Your computer will recognize it is USB charging. 2. Then slide from top, the system will show as follow picture, then you can select File transfers item. 27 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Use USB for Description Charging For charging when you connect with PC host. If your OS of PC host is Windows XP, only this item be selected and you can’t select other items. File Transfers For file transfer when you connect with PC host. You can find a storage device on your PC host site. Photo Transfer (PTP) For file transfer when you connect with PC host. You can find DCIM folder of storage device on your PC host site. MIDI For file transfer when you connect with PC host. You can find some folder of storage device on your PC host site. 3. After connecting the terminal to PC with USB, you can find a removable storage on my computer.
PA730 User’s Manual You may also download the Google sync device manager software on your computer. You can set it up to automatically get music, photos, and videos file of PA730 to your computer. Please disable check box of USB debugging on the Developer options item of android Setting when you want transfer file from computer to PA730. 28 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 2.10 Camera Setting 2.10.1 Camera Settings 29 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Please tap to start Camera App, press to take a picture. 2. Press to do advance setting. Panorama mode Video Camera
PA730 User’s Manual 3. Press to do mode setting 30 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 4. Press to do effects setting
31 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 2.10.2 Video Settings Press to do advance setting. 2.10.3 Photos & Videos Storage Location You can choose two different storage ways to save photos & videos : Phone or SD card. SD Card item can not be activated if no SD Card installed in PA730. Please see the photo below.
PA730 User’s Manual 2.11 Performing a Hardware Reset You may have to perform a reset if the device freezes (i.e., the terminal no longer responds to the buttons or tapping on the screen). Long press Power button and Volume down button simultaneously to make the device restart the system within 20 seconds. 32 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 2.12 Performing Factory Data Reset 33 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings. 2. You can reset to factory default when you select Factory data reset item, it will erase all include enterprise folder. 3. You can reset to factory default when you select Network Setting reset item, it will erase all RF data Factory Data Reset Network Setting Reset
PA730 User’s Manual 2.13 Programmable Keys The PA730’s keys can be programmed for users to be able to perform different functions or applications. 2.13.1 Programming a Physical Key 34 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings, go to SYSTEM, Tap Programmable keys 2. Tap Redefine Key to select the physical key to remap. Then select the redefined type that you prefer : Keycode / Unicode Note: Power key can not be redefined.
35 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 3. Please tap Redefine this key after remapping the physical key. 2.13.2 View Redefined Key List Please tap view redefined key list to check the redefined keys. To remove all redefined keys, please tap
PA730 User’s Manual 2.14 Battery Swap Please follow the steps for the battery swap. 1. Long press power button until you see the pop up window and tap Battery Swap Mode. 2. The LED indicator will start showing solid red light. Please swap the battery after the LED red light goes off. Make sure do not turn on PA730 during the battery swap process. 3. When the battery swap is done, press the power button to restart PA730. Note: Please see 1.4.1 Installing the Battery for more information. 36 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual Chapter 3 – Introduction to Applications 3.1 Scan Service 37 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, then tap ScanService. 2. You are now enter the ScanService application. There are three main items : Settings, Test and Version. Note : For more Scan Service settings, please refer to 2.1 Barcode Setting. 3.1.1 Test 1. Scanned data information / Save / Clear all scanned data. Tap Test to start scanning barcodes.
38 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 2. Aim the Barcode Scan Engine to the barcode and press one of two scan buttons. Barcode Scan Engine 3. After scanning the barcodes, the barcode information is as shown below. ①Tap ② Choose the path and filename to save the scanned data.
PA730 User’s Manual 3.1.2 More Options ￭ For more options and settings, please tap . ￭ Auto Scan ￭ Scan2key Setting ￭ Device Option ￭ On Screen Button Option ￭ Save / Load Settings ￭ Update 39 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 3.2 File Manager 40 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap File Manager. : Settings : Return to the previous page : Main page : Refresh : Folder arrangement : Folder Information : Solutions
PA730 User’s Manual 3.3 Update Center 41 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap Settings, and then tap About Phone to search for System updates. Or tap for system updates. 2. To update or check the latest version of software and applications, you will need to do it manually.
42 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA730 User’s Manual 3.4 Sound Recorder 1. Tap go to APPS, and tap Sound Recorder. 2. Recording : Tap to start the sound recording. Record Button Pause Play
PA730 User’s Manual 3. After recording messages, all the recording files will be saved in 43 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. filemanger. Please tap first to refresh all the files. 4. Long press the recording files for more file operations.
PA730 User’s Manual 3.5 Push To Talk To operate push to talk, please go to Google Play store to download the walkie talkie apps which can support any android device. For example, Zello PTT Walkie Talkie is the most recommended walkie talkie app. Push to Talk 44 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 3.6 MoboLink MoboLink is a software platform that helps unitech customers to remote manage their purchased devices and applications. The core of the MoboLink platform provides functionalities in the MDM (Mobile Device Management) and MAM (Mobile Application Management) domains, and then further extends into other management functions such as alert notification management and account management. 45 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. Tap go to APPS, and tap MoboLink. MoboLink will run in the background. Note: If there is no internet connection, MoboLink will be activated after few seconds.
PA730 User’s Manual 2. MoboLink setting is shown as below : Enter MoboLink server URL manually in the text field or scan a MoboLink server URL Barcode 46 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Tap “Save” to initiate MoboLink Server URL
PA730 User’s Manual 3. MoboLink screen information is as below: Slide ON/OFF button to show MoboLink 47 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Tap “Exit” to leave the screen
PA730 User’s Manual 3.6.1 More about MoboLink For detailed operation, solution and usage, please refer to MoboLink user’s guide. ( http://mobolink.tw.ute.com/support ) 48 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA730 User’s Manual 3.7 SOTI PA730 is supported by SOTI which provides advanced helpdesk solutions for our users. To download SOTI, please go to : https://www.soti.net/oem 49 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.

Navigation menu