Quectel Wireless Solutions 201703FC20N WiFi Module User Manual
Quectel Wireless Solutions Company Limited WiFi Module
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3367776 |
| Application ID | dlJaDOAD71BRAaaH1F+sPg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 85.91kB (1073916 bits) |
| Date Submitted | 2017-04-24 00:00:00 |
| Date Available | 2017-04-24 00:00:00 |
| Creation Date | 2017-04-21 13:44:41 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2017-04-21 13:44:41 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | kelly |
FC20-N Series Hardware Design Wi-Fi Module Series Rev. FC20-N_Series_Hardware_Design_V1.0 Date: 2016-11-02 www.quectel.com FC20-N Series Hardware Design Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233 Tel: +86 21 5108 6236 Email: info@quectel.com Or our local office. For more information, please visit: http://www.quectel.com/support/salesupport.aspx For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/techsupport.aspx Or email to: Support@quectel.com GENERAL NOTES QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved. FC20-N_Series_Hardware_Design 47 Confidential / Released 1/ FC20-N Series Hardware Design About the Document History Revision Date Author Description 1.0 2016-11-02 Power JIN Initial FC20-N_Series_Hardware_Design 47 Confidential / Released 2/ FC20-N Series Hardware Design Contents About the Document ................................................................................................................................... 2 Contents ....................................................................................................................................................... 3 Table Index ................................................................................................................................................... 5 Figure Index ................................................................................................................................................. 6 Introduction .......................................................................................................................................... 7 1.1. Safety Information ................................................................................................................... 7 Product Concept .................................................................................................................................. 9 2.1. General Description ................................................................................................................. 9 2.2. Directives and Standards ........................................................................................................ 9 2.2.1. FCC Statement ................................................................................................................. 9 2.2.2. FCC Radiation Exposure Statement ................................................................................ 9 2.3. Key Features ......................................................................................................................... 10 2.4. Functional Diagram ............................................................................................................... 11 2.5. Evaluation Board ................................................................................................................... 12 Application Interfaces ....................................................................................................................... 13 3.1. General Description ............................................................................................................... 13 3.2. Pin Assignment ...................................................................................................................... 14 3.3. Pin Description ...................................................................................................................... 15 3.4. Power Supply ........................................................................................................................ 18 3.5. WLAN Interface ..................................................................................................................... 20 3.5.1. WAKE_ON_WIRELESS Interface ................................................................................. 21 3.5.2. WLAN_EN ...................................................................................................................... 21 3.5.3. SDIO Interface ............................................................................................................... 21 3.6. Coexistence Interface............................................................................................................ 23 3.7. Other Interfaces ..................................................................................................................... 23 3.7.1. DBG_TXD Interface ....................................................................................................... 23 3.7.2. 32KHz_IN Interface ........................................................................................................ 24 3.8. Antenna Interface .................................................................................................................. 24 3.8.1. Pin Definition of the RF Antenna .................................................................................... 24 3.8.2. Operating Frequency ..................................................................................................... 25 3.8.3. Reference Design .......................................................................................................... 25 3.8.4. Antenna Requirements .................................................................................................. 25 3.8.5. Install the Antenna with RF Connector .......................................................................... 26 Electrical, Reliability and Radio Characteristics ............................................................................ 29 4.1. General Description ............................................................................................................... 29 4.2. Electrical Characteristics ....................................................................................................... 29 4.3. I/O Interface Characteristics .................................................................................................. 30 4.4. Current Consumption ............................................................................................................ 30 FC20-N_Series_Hardware_Design 47 Confidential / Released 3/ FC20-N Series Hardware Design 4.5. 4.6. RF Performance .................................................................................................................... 32 Electrostatic Discharge.......................................................................................................... 34 Mechanical Dimensions .................................................................................................................... 35 5.1. Mechanical Dimensions of the Module ................................................................................. 35 5.2. Recommended Footprint and Stencil .................................................................................... 37 5.3. Top and Bottom View of the Module ..................................................................................... 39 Storage, Manufacturing and Packaging .......................................................................................... 40 6.1. Storage .................................................................................................................................. 40 6.2. Soldering ............................................................................................................................... 41 6.3. Packaging .............................................................................................................................. 42 6.3.1. Tape and Reel Packaging .............................................................................................. 42 Appendix A References..................................................................................................................... 44 FC20-N_Series_Hardware_Design 47 Confidential / Released 4/ FC20-N Series Hardware Design Table Index TABLE 1: FC20 SERIES PRODUCTS ................................................................................................................ 7 TABLE 2: KEY FEATURES ............................................................................................................................... 10 TABLE 3: I/O PARAMETERS DEFINITION ....................................................................................................... 15 TABLE 4: PIN DESCRIPTION ........................................................................................................................... 15 TABLE 5: POWER SUPPLY PINS AND GND PINS .......................................................................................... 18 TABLE 6: PIN DEFINITION OF WAKE_ON_WIRELESS ................................................................................. 21 TABLE 7: PIN DEFINITION OF WLAN_EN ....................................................................................................... 21 TABLE 8: PIN DEFINITION OF THE SDIO INTERFACE .................................................................................. 21 TABLE 9: PIN DEFINITION OF COEXISTENCE INTERFACE ......................................................................... 23 TABLE 10: PIN DEFINITION OF DBG_TXD INTERFACE ................................................................................ 24 TABLE 11: PIN DEFINITION OF 32KHZ_IN INTERFACE ................................................................................ 24 TABLE 12: PIN DEFINITION OF THE RF ANTENNA ....................................................................................... 24 TABLE 13: OPERATING FREQUENCY OF THE MODULE ............................................................................. 25 TABLE 14: ANTENNA CABLE REQUIREMENTS ............................................................................................. 26 TABLE 15: ANTENNA REQUIREMENTS.......................................................................................................... 26 TABLE 16: ABSOLUTE MAXIMUM RATINGS .................................................................................................. 29 TABLE 17: RECOMMENDED OPERATING CONDITIONS .............................................................................. 30 TABLE 18: GENERAL DC ELECTRICAL CHARACTERISTICS ....................................................................... 30 TABLE 19: CURRENT CONSUMPTION OF THE MODULE IN LOW POWER MODE .................................... 30 TABLE 20: CURRENT CONSUMPTION OF THE MODULE ............................................................................ 31 TABLE 21: CONDUCTED RF OUTPUT POWER AT 2.4GHZ .......................................................................... 32 TABLE 22: CONDUCTED RF OUTPUT POWER AT 5GHZ ............................................................................. 33 TABLE 23: CONDUCTED RF RECEIVING SENSITIVITY AT 2.4GHZ ............................................................. 33 TABLE 24: CONDUCTED RF RECEIVING SENSITIVITY AT 5GHZ ................................................................ 34 TABLE 25: REEL PACKAGING ......................................................................................................................... 43 TABLE 26: RELATED DOCUMENTS ................................................................................................................ 44 TABLE 27: TERMS AND ABBREVIATIONS ...................................................................................................... 44 FC20-N_Series_Hardware_Design 47 Confidential / Released 5/ FC20-N Series Hardware Design Figure Index FIGURE 1: FUNCTIONAL DIAGRAM OF FC20-N MODULE ............................................................................ 11 FIGURE 2: PIN ASSIGNMENT OF FC20 SERIES MODULE ........................................................................... 14 FIGURE 3: REFERENCE CIRCUIT FOR VDD_3V3 ........................................................................................ 19 FIGURE 4: TIMING OF POWER ON/OFF THE FC20 SERIES MODULE ....................................................... 20 FIGURE 5: WLAN INTERFACE CONNECTION ............................................................................................... 20 FIGURE 6: SDIO INTERFACE CONNECTION ................................................................................................. 22 FIGURE 7: COEXISTENCE INTERFACE CONNECTION................................................................................ 23 FIGURE 8: REFERENCE CIRCUIT FOR RF ANTENNA INTERFACE ............................................................ 25 FIGURE 9: DIMENSIONS OF THE UF.L-R-SMT CONNECTOR (UNIT: MM) .................................................. 26 FIGURE 10: MECHANICALS OF UF.L-LP CONNECTORS (UNIT: MM) .......................................................... 27 FIGURE 11: SPACE FACTOR OF MATED CONNECTOR (UNIT: MM)............................................................ 27 FIGURE 12: FC20 TOP AND SIDE DIMENSIONS (UNIT: MM) ........................................................................ 35 FIGURE 13: FC20 BOTTOM DIMENSIONS (UNIT: MM) ................................................................................. 36 FIGURE 14: RECOMMENDED FOOTPRINT (UNIT: MM) ................................................................................ 37 FIGURE 15: RECOMMENDED STENCIL (UNIT: MM) ..................................................................................... 38 FIGURE 16: TOP VIEW OF THE MODULE ...................................................................................................... 39 FIGURE 17: BOTTOM VIEW OF THE MODULE .............................................................................................. 39 FIGURE 18: REFLOW SOLDERING THERMAL PROFILE .............................................................................. 41 FIGURE 19: TAPE DIMENSIONS (UNIT: MM).................................................................................................. 42 FIGURE 20: REEL DIMENSIONS (UNIT: MM) ................................................................................................. 43 FC20-N_Series_Hardware_Design 47 Confidential / Released 6/ FC20-N Series Hardware Design Introduction This document defines the FC20 series module and describes its hardware interface which is connected with the customer’s application as well as its air interface. The document can help customers quickly understand module interface specifications, as well as the electrical and mechanical details. Associated with application note and user guide, customers can use FC20 series module to design and set up mobile applications easily. FC20 series module contains two variants: FC20 and FC20-N. Customers can choose the dedicated type basing on their requirements. The following table shows the entire models of FC20 series. Table 1: FC20 Series Products Module Wi-Fi BT FC20-N 2.4GHz Not Supported 1.1. Safety Information The following safety precautions must be observed during all phases of the operation, such as usage, service or repair of any cellular terminal or mobile incorporating FC20 series module. Manufacturers of the cellular terminal should send the following safety information to users and operating personnel, and incorporate these guidelines into all manuals supplied with the product. If not so, Quectel assumes no liability for the customer’s failure to comply with these precautions. Full attention must be given to driving at all times in order to reduce the risk of an accident. Using a mobile while driving (even with a handsfree kit) causes distraction and can lead to an accident. You must comply with laws and regulations restricting the use of wireless devices while driving. FC20-N_Series_Hardware_Design 47 Confidential / Released 7/ FC20-N Series Hardware Design Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is switched off. The operation of wireless appliances in an aircraft is forbidden, so as to prevent interference with communication systems. Consult the airline staff about the use of wireless devices on boarding the aircraft, if your device offers an Airplane Mode which must be enabled prior to boarding an aircraft. Switch off your wireless device when in hospitals, clinics or other health care facilities. These requests are desinged to prevent possible interference with sensitive medical equipment. Cellular terminals or mobiles operating over radio frequency signal and cellular network cannot be guaranteed to connect in all conditions, for example no mobile fee or with an invalid SIM card. While you are in this condition and need emergent help, please remember using emergency call. In order to make or receive a call, the cellular terminal or mobile must be switched on and in a service area with adequate cellular signal strength. Your cellular terminal or mobile contains a transmitter and receiver. When it is ON, it receives and transmits radio frequency energy. RF interference can occur if it is used close to TV set, radio, computer or other electric equipment. In locations with potentially explosive atmospheres, obey all posted signs to turn off wireless devices such as your phone or other cellular terminals. Areas with potentially explosive atmospheres include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles such as grain, dust or metal powders, etc. FC20-N_Series_Hardware_Design 47 Confidential / Released 8/ FC20-N Series Hardware Design Product Concept 2.1. General Description FC20-N module is a low-power and low-cost wireless module based on QCA9377-3. FC20-N module only supports 1×1 IEEE 802.11 b/g/n WLAN standards. 2.2. Directives and Standards The FC20-N module is designed to comply with the FCC statements. FCC ID: XMR201703FC20N The Host system using FC20-N should have label “contains FCC ID: XMR201701FC20N 2.2.1. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2.2.2. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this module usage. This module should NOT be installed and operating simultaneously with other radio. The manual of the host system, which uses FC20-N, must include RF exposure warning statement to advice user should keep minimum 20cm from the radio antenna of FC20-N module depending on the Mobile status. Note: If a portable device (such as PDA) uses FC20-N module, the device needs to do permissive change and SAR testing. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful FC20-N_Series_Hardware_Design 47 Confidential / Released 9/ FC20-N Series Hardware Design interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between theequipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 2.3. Key Features The following table describes the detailed features of FC20-N module. Table 2: Key Features Features Implementation Power Supply Main supply voltage: 3.3V, 400mA IO supply voltage: 1.8V Transmission Data FC20-N: 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Transmitting Power FC20-N: 802.11b/11Mbps: 17dBm 802.11g/54Mbps: 15dBm 802.11n/HT20 MCS7: 14dBm 802.11n/HT40 MCS7: 13dBm Protocol Features FC20-N: IEEE 802.11b/g/n Operator Mode AP STA* Modulation 802.11b: DSSS 802.11g/n20/n40: OFDM WLAN Interface SDIO 3.0 Antenna Interface Wi-Fi antenna, 50Ω Physical Characteristics Size: 16.6±0.15 × 13±0.15 × 2.1±0.2mm Interface: LCC+LGA Weight: about 0.81g Temperature Range Operating temperature range: -35°C~+75°C 1) Extended temperature range : -40°C~+85°C 2) FC20-N_Series_Hardware_Design 47 Confidential / Released 10 / FC20-N Series Hardware Design RoHS All hardware components are fully compliant with EU RoHS directive NOTES 1. 2. 1) Within operation temperature range, the module is IEEE compliant. Within extended temperature range, the module remains the ability for data transmission. There is no unrecoverable malfunction. There are also no effects on radio spectrum and no harm to radio network. Only one or more parameters like Pout might reduce in their value and exceed the specified tolerances. When the temperature returns to the normal operating temperature levels, the module will meet IEEE compliant again. 2) 2.4. Functional Diagram The following figure shows a block diagram of FC20-N module and illustrates the major functional parts. Power supply SDIO PCM and UART RF antenna RF_ANT VDD_3V3 VIO SDIO Diplexer WLAN_EN WAKE_ON_WIRELESS COEX_UART MAC/BB/Radio TX/RX 2.4G Filter 48MHz XO Figure 1: Functional Diagram of FC20-N Module NOTE FC20-N_Series_Hardware_Design 47 Confidential / Released 11 / FC20-N Series Hardware Design Please keep these pins open in FC20-N. 2.5. Evaluation Board In order to help customers to develop applications with FC20-N module, Quectel supplies an evaluation board (EVB), a RS-232 to USB cable, a USB data cable, a power adapter, 4 antennas and other peripherals to control or test the module. For details, please refer to document [1]. FC20-N_Series_Hardware_Design 47 Confidential / Released 12 / FC20-N Series Hardware Design Application Interfaces 3.1. General Description FC20-N module is equipped with 38 LCC pads and 14 LGA pads that can be connected to the cellular application platform. Sub-interfaces included in these pads are described in details in following chapters: Power supply WLAN interface Coexistence interface Antenna interface FC20-N_Series_Hardware_Design 47 Confidential / Released 13 / FC20-N Series Hardware Design GND RESERVED GND RESERVED RESERVED RESERVED WAKE_ON_WIRELESS 38 37 36 35 34 33 32 3.2. Pin Assignment GND 31 GND RESERVED 30 RF_ANT RESERVED 29 GND DBG_TXD 28 GND LTE_UART_TXD 27 SDIO_CMD LTE_UART_RXD 40 48 26 SDIO_CLK BT_UART_RTS 41 47 25 SDIO_D0 BT_UART_CTS 24 SDIO_D1 WLAN_EN 23 SDIO_D2 BT_EN 10 22 SDIO_D3 VIO 11 21 VDD_3V3 GND 12 20 GND 51 50 49 39 46 42 14 15 16 17 18 19 PCM_CLK PCM_OUT BT_UART_TXD BT_UART_RXD 32KHz_IN 45 PCM_SYNC 44 PCM_IN 43 13 Power Pins 52 GND Pins Signal Pins Reserved Pins Figure 2: Pin Assignment of FC20 Series Module NOTE Please keep all RESERVED pins open. FC20-N_Series_Hardware_Design 47 Confidential / Released 14 / FC20-N Series Hardware Design 3.3. Pin Description The following tables show the pin definition of FC20 series. Table 3: I/O Parameters Definition Type Description IO Bidirectional input/output DI Digital input DO Digital output PI Power input Table 4: Pin Description Power Supply Pin Name VDD_3V3 Pin No. 21 VIO 11 GND 1, 12, 20, 28, 29, 31, 36, 38~40, 43~45, 48~52 I/O Description DC Characteristics Comment PI Main power supply for module Vmax=3.46V Vmin=3.14V Vnorm=3.3V It must be able to provide sufficient current up to 0.9A. PI Power supply for module IO pin Vmax=1.89V Vmin=1.71V Vnorm=1.8V It is powered by EC20 R2.0/EC21/EC25 module. DC Characteristics Comment Ground WLAN Interface Pin Name Pin No. I/O Description WAKE_ON_ WIRELESS 32 DO Wake up host VOLmax=0.18V VOHmin=1.62V 1.8V power domain. Active low. If unused, keep this pin open. WLAN_EN DI WLAN enabled VILmin=-0.3V VILmax=0.54V 1.8V power domain. Active high. FC20-N_Series_Hardware_Design 47 Confidential / Released 15 / FC20-N Series Hardware Design VIHmin=1.26V VIHmax=2.0V SDIO_D3 SDIO_D2 SDIO_D1 SDIO_D0 SDIO_CLK SDIO_CMD 22 23 24 25 26 IO IO IO IO DI SDIO data pin bit 3 VOLmax=0.18V VOHmin=1.62V VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain SDIO data pin bit 2 VOLmax=0.18V VOHmin=1.62V VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. Require external pull-up to 1.8V. SDIO data pin bit 1 VOLmax=0.18V VOHmin=1.62V VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain SDIO data pin bit 0 VOLmax=0.18V VOHmin=1.62V VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain SDIO clock VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain 1.8V power domain 27 IO SDIO command VOLmax=0.18V VOHmin=1.62V VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V Pin No. I/O Description DC Characteristics Comment Bluetooth enabled VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. Active high. BT Interface Pin Name BT_EN 10 DI FC20-N_Series_Hardware_Design 47 Confidential / Released 16 / FC20-N Series Hardware Design PCM_IN PCM_SYNC PCM_CLK PCM_OUT BT_UART_ RTS BT_UART_ CTS BT_UART_ TXD BT_UART_ RXD 13 14 15 16 17 18 Bluetooth PCM data input VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. Bluetooth PCM data frame sync signal VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. DI Bluetooth PCM clock VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. DO Bluetooth PCM data output VOLmax=0.18V VOHmin=1.62V 1.8V power domain. If unused, keep this pin open. Request to send VOLmax=0.18V VOHmin=1.62V 1.8V power domain. If unused, keep this pin open. DI Clear to send VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. DO Bluetooth transmits data VOLmax=0.18V VOHmin=1.62V 1.8V power domain. If unused, keep this pin open. DI Bluetooth receives data VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. DI DI DO Coexistence Interface Pin Name Pin No. I/O Description DC Characteristics Comment LTE_UART_ TXD DO LTE coexistence signal VOLmax=0.18V VOHmin=1.62V 1.8V power domain. If unused, keep this pin open. 1.8V power domain. If unused, keep this pin open. Comment LTE_UART_ RXD DI LTE coexistence signal VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V Pin No. I/O Description DC Characteristics RF Interface Pin Name FC20-N_Series_Hardware_Design 47 Confidential / Released 17 / FC20-N Series Hardware Design RF_ANT 30 IO WLAN and BT antenna 50Ω impedance. Pin No. I/O Description DC Characteristics Comment DO Software debugging VOLmax=0.18V VOHmin=1.62V 1.8V power domain. If unused, keep this pin open. DI Low power. External 32.768KHz clock input is required in sleep mode. VILmin=-0.3V VILmax=0.54V VIHmin=1.26V VIHmax=2.0V 1.8V power domain. If unused, keep this pin open. I/O Description DC Characteristics Other Pins Pin Name DBG_TXD 32KHz_IN 19 RESERVED Pins Pin Name Pin No. RESERVED 2, 3, 33~35, 37, 41, 42, 46, 47 Comment Keep these pins unconnected. Reserved NOTE FC20-N module does not support BT interface and coexistence interface. 3.4. Power Supply The following table shows the power supply pins and the ground pins of FC20 series. The VIO is powered by EC20 R2.0/EC21/EC25. Table 5: Power Supply Pins and GND Pins Pin Name Pin No. Description Min. Typ. Max. Unit VDD_3V3 21 Main power supply for module 3.14 3.3 3.46 VIO 11 Power supply for module IO 1.71 1.8 1.89 GND 1, 12, 20, Ground FC20-N_Series_Hardware_Design 47 Confidential / Released 18 / FC20-N Series Hardware Design 28, 29, 31, 36, 38~40, 43~45, 48~52 FC20 series is powered by VDD_3V3, and it is recommended to use power supply chip whose maximum output current is more than 1.2A. The following figure shows a reference design for VDD_3V3, which is controlled by PM_ENABLE. And PM_ENABLE should be connected to pin 127 of EC20 R2.0/EC21/EC25. For more details, please refer to document [2], [3] or [4]. L401 1uH U402 D1 L1 L2 B1 L2 B2 D2 L1 D3 L1 DC_5V C405 10uF E1 VIN E2 VIN VOUT A1 VOUT A2 E3 VIN E4 VINA VOUT A3 FB A4 D4 EN PM_ENABLE L2 B3 R407 100K C4 GND C406 C407 22uF 22uF PFM/PWM B4 PGND C1 PGND C2 VDD_3V3 R408 DC_5V 1M PGND C3 TPS630242 Figure 3: Reference Circuit for VDD_3V3 FC20-N_Series_Hardware_Design 47 Confidential / Released 19 / FC20-N Series Hardware Design The following figure shows the recommended power on/off sequences for FC20 series. VIO >0 >0 PM_ENABLE VDD_3V3 TBD ≥ 5us WLAN_EN BT_EN Module Status Power up Power down Runnig Figure 4: Timing of Power ON/OFF the FC20 Series Module Execute AT command AT+QWIFI=1 to open VDD_3V3 and WLAN. 3.5. WLAN Interface The following figure shows the WLAN interface connection between FC20 series and EC20 R2.0/EC21/EC25. SDIO FC20 Series WLAN_EN WAKE_ON_WIRELESS SDIO WLAN_EN EC20 R2.0/ EC21/EC25 WAKE_ON_WIRELESS Figure 5: WLAN Interface Connection FC20-N_Series_Hardware_Design 47 Confidential / Released 20 / FC20-N Series Hardware Design 3.5.1. WAKE_ON_WIRELESS Interface WAKE_ON_WIRELESS interface is used to wake up the EC20 R2.0/EC21/EC25. When WAKE_ON_WIRELESS is pulled down, EC20 R2.0/EC21/EC25 can be woken up. Table 6: Pin Definition of WAKE_ON_WIRELESS Pin Name Pin No. WAKE_ON_WIRELESS 32 I/O DO Description Comment Wake up host Active low. If unused, keep this pin open. 3.5.2. WLAN_EN WLAN_EN is used to control the WLAN function of FC20 series. When WLAN_EN is at high level voltage, WLAN function will be enabled. Table 7: Pin Definition of WLAN_EN Pin Name Pin No. I/O Description Comment WLAN_EN DI WLAN enabled Active high NOTE WLAN_EN is a sensitive signal, which should be guarded by ground and routed as close as possible to FC20 series module. 3.5.3. SDIO Interface The following table shows the pin definition of the SDIO interface of FC20 series. Table 8: Pin Definition of the SDIO Interface Pin Name Pin No. I/O Description Comment SDIO_D3 22 IO SDIO data pin bit 3 1.8V power domain SDIO_D2 23 IO SDIO data pin bit 2 1.8V power domain. Require external pull-up to FC20-N_Series_Hardware_Design 47 Confidential / Released 21 / FC20-N Series Hardware Design 1.8V. SDIO_D1 24 IO SDIO data pin bit 1 1.8V power domain SDIO_D0 25 IO SDIO data pin bit 0 1.8V power domain SDIO_CLK 26 DI SDIO clock 1.8V power domain SDIO_CMD 27 IO SDIO command 1.8V power domain The following figure shows the SDIO interface connection between FC20 series and EC20 R2.0/EC21/EC25. VIO VIO VIO VIO VIO VIO NM_10K 10K NM_10K NM_10K NM_10K NM_10K NM_10nF SDIO_CLK SD1_CLK SDIO_CMD SD1_CMD FC20 Series SDIO_D0 SD1_D0 SDIO_D1 SD1_D1 SDIO_D2 SD1_D2 SDIO_D3 SD1_D3 EC20 R2.0/ EC21/EC25 Figure 6: SDIO Interface Connection In order to ensure the performance of SDIO, please comply with the following principles: SDIO signals are very high-speed signals. Please prevent crosstalk between them and other sensitive signals. Keep SDIO traces as parallel as possible in the same layer. Make sure SDIO lines are guarded by ground vias and not crossed. Do not route SDIO signal traces under crystals, oscillators, magnetic devices and RF signal traces. The pull-up resistor on SDIO_D2 line must be mounted. Keep SDIO traces as short as possible with equal length, and impedance control as 50Ω. The spacing to all other signals is greater than 2 times of the line width. FC20-N_Series_Hardware_Design 47 Confidential / Released 22 / FC20-N Series Hardware Design 3.6. Coexistence Interface Coexistence function is only supported by FC20. Please keep these pins open in FC20-N. The following table shows the pin definition of FC20’s coexistence interface. Table 9: Pin Definition of Coexistence Interface Pin Name Pin No. I/O Description Comment LTE_UART_TXD DO LTE coexistence signal If unused, keep this pin open. LTE_UART_RXD DI LTE coexistence signal If unused, keep this pin open. FC20 module supports LTE-WLAN coexistence and LTE-BT coexistence. The following figure shows the coexistence interface connection between FC20 and EC20 R2.0/EC21/EC25. LTE_UART_TXD COEX_UART_RX FC20 LTE_UART_RXD COEX_UART_TX EC2 R2.0/ EC21/EC25 Figure 7: Coexistence Interface Connection NOTE LTE-BT coexistence function is under development. 3.7. Other Interfaces 3.7.1. DBG_TXD Interface DBG_TXD interface can be used for log output. FC20-N_Series_Hardware_Design 47 Confidential / Released 23 / FC20-N Series Hardware Design Table 10: Pin Definition of DBG_TXD Interface Pin Name Pin No. I/O Description Comment DBG_TXD DO Software debugging If unused, keep this pin open. 3.7.2. 32KHz_IN Interface The 32KHz clock is used in low power mode such as IEEE power saving mode and sleep mode. It serves as a timer to determine when to wake up FC20 series module to receive beacons in various power saving schemes, and to maintain basic logic operations when in sleep mode. The sleep clock signal is transferred from EC20 R2.0/EC21/EC25 module. Table 11: Pin Definition of 32KHz_IN Interface Pin Name Pin No. 32KHz_IN 19 I/O Description Comment DI Low power. External 32.768KHz clock input is required in sleep mode. If unused, keep this pin open. 3.8. Antenna Interface The pin 30 is the RF antenna pad. And the RF interface has an impedance of 50Ω. 3.8.1. Pin Definition of the RF Antenna Table 12: Pin Definition of the RF Antenna Pin Name Pin No. I/O GND 28 Ground GND 29 Ground FC20-N_Series_Hardware_Design 47 Description Comment Confidential / Released 24 / FC20-N Series Hardware Design RF_ANT 30 GND 31 IO 50Ω impedance RF antenna pad Ground 3.8.2. Operating Frequency Table 13: Operating Frequency of the Module Feature Frequency Unit WLAN-2.4GHz 2.412~2.462 GHz 3.8.3. Reference Design FC20 series module provides an RF antenna pad for antenna connection. The RF trace in host PCB connected to the module’s RF antenna pad should be microstrip line or other types of RF trace, whose characteristic impendence should be close to 50Ω. FC20 series module comes with grounding pads which are next to the antenna pad in order to give a better grounding. The RF external circuit is recommended as following figure. And a π-type matching circuit should be reserved for better RF performance. The capacitors are not mounted by default. R1 RF_ANT 0R FC20 Series C1 NM C2 NM Figure 8: Reference Circuit for RF Antenna Interface 3.8.4. Antenna Requirements The following table shows the requirements on RF antenna. FC20-N_Series_Hardware_Design 47 Confidential / Released 25 / FC20-N Series Hardware Design Table 14: Antenna Cable Requirements Type Requirements 2.412~2.462GHz Cable insertion loss <1dB Table 15: Antenna Requirements Type Requirements Frequency Range 2.412~2.462GHz VSWR <2:1 recommended Gain (dBi) 1 typical Max Input Power (W) 50 Input Impedance (Ω) 50 Polarization Type Vertical 3.8.5. Install the Antenna with RF Connector The following figure is the antenna installation with RF connector provided by HIROSE. The recommended RF connector is UF.L-R-SMT. Figure 9: Dimensions of the UF.L-R-SMT Connector (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 26 / FC20-N Series Hardware Design Customers can use U.FL-LP serial connector listed in the following figure to match the UF.L-R-SMT. Figure 10: Mechanicals of UF.L-LP Connectors (Unit: mm) The following figure describes the space factor of mated connector Figure 11: Space Factor of Mated Connector (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 27 / FC20-N Series Hardware Design For more details, please visit http://www.hirose.com. FC20-N_Series_Hardware_Design 47 Confidential / Released 28 / FC20-N Series Hardware Design Electrical, Reliability and Radio Characteristics 4.1. General Description This chapter mainly introduces the electrical and the radio frequency characteristics of FC20 series module, which are listed in detail in the following chapters: Electrical characteristics I/O interface characteristics Current consumption RF performance Electrostatic discharge 4.2. Electrical Characteristics The following table shows the absolute maximum ratings. Table 16: Absolute Maximum Ratings Parameter Min. Max. Unit VDD_3V3 -0.3 4.0 VIO -0.3 1.89 Digital I/O input voltage -0.3 VIO+0.2 FC20-N_Series_Hardware_Design 47 Confidential / Released 29 / FC20-N Series Hardware Design The following table shows the recommended operating conditions for FC20 series module. Table 17: Recommended Operating Conditions Parameter Min. Typ. Max. Unit VDD_3V3 3.14 3.3 3.46 VIO 1.71 1.8 1.89 4.3. I/O Interface Characteristics The following table shows the general DC electrical characteristics over recommended operating conditions (unless otherwise specified). Table 18: General DC Electrical Characteristics Symbol Parameter Min. Max. Unit VIH High Level Input Voltage 0.7*VIO VIO+0.2 VIL Low Level Input Voltage -0.3 0.3*VIO VOH High Level Output Voltage 0.9*VIO VIO VOL Low Level Output Voltage 0.1*VIO IIL Input Leakage Current -5 uA 4.4. Current Consumption The values of current consumption are shown as below. Table 19: Current Consumption of the Module in Low Power Mode Description Conditions IWLAN_3V3 IVIO Unit OFF State AT+QWIFI=0 554 uA FC20-N_Series_Hardware_Design 47 Confidential / Released 30 / FC20-N Series Hardware Design Description Conditions IWLAN_3V3 IVIO Unit Idle AT+QWIFI=1 66 6.5 mA Table 20: Current Consumption of the Module Description Conditions IWLAN_3V3 Unit TX 1Mbps @17.5dBm 370 mA TX 11Mbps @17.2dBm 357 mA RX 1Mbps 48 mA RX 11Mbps 49 mA TX 6Mbps @16dBm 328 mA TX 54Mbps @14.8dBm 245 mA RX 6Mbps 49 mA RX 54Mbps 50 mA TX HT20-MCS0 @15.8dBm 322 mA TX HT20-MCS7 @13.5dBm 234 mA TX HT40-MCS0 @14.5dBm 291 mA TX HT40-MCS7 @12.5dBm 194 mA RX HT20-MCS0 49 mA RX HT20-MCS7 50 mA RX HT40-MCS0 54 mA RX HT40-MCS7 52 mA TX HT20 MCS0 @dBm TBD mA TX HT20 MCS7 @dBm TBD mA RX HT20 MCS0 TBD mA RX HT20 MCS7 TBD mA 802.11b 802.11g 802.11n 802.11a FC20-N_Series_Hardware_Design 47 Confidential / Released 31 / FC20-N Series Hardware Design Description 802.11ac Conditions IWLAN_3V3 Unit TX VHT20 MCS0 @13.2dBm 378 mA TX VHT20 MCS8 @12.5dBm 289 mA TX VHT40 MCS0 @13.5dBm 372 mA TX VHT40 MCS9 @10.5dBm 244 mA TX VHT80 MCS0 @13dBm 355 mA TX VHT80 MCS9 @10dBm 220 mA RX VHT20 MCS0 78 mA RX VHT20 MCS8 78 mA RX VHT40 MCS0 85 mA RX VHT40 MCS9 84 mA RX VHT80 MCS8 92 mA RX VHT80 MCS9 91 mA NOTE OFF state: Execute AT+QWIFI=0 to bring the module to this state. Under the state, the sleep clock is disabled and no data is saved. 4.5. RF Performance The following tables summarize the transmitter and receiver characteristics of FC20 series. Table 21: Conducted RF Output Power at 2.4GHz Frequency Min. Typ. Unit 802.11b @1Mbps 16.8 17.5 dBm 802.11b @11Mbps 16.5 17 dBm FC20-N_Series_Hardware_Design 47 Confidential / Released 32 / FC20-N Series Hardware Design 802.11g @6Mbps 15 15.5 dBm 802.11g @54Mbps 14.5 15 dBm 802.11n, HT20 @MCS0 15 15.5 dBm 802.11n, HT20 @MCS7 13.5 14 dBm Table 22: Conducted RF Output Power at 5GHz Frequency Min. Typ. Unit 802.11a @6Mbps 13 13.5 dBm 802.11a @54Mbps 12.5 13 dBm 802.11ac, HT20 @MCS0 13 13.5 dBm 802.11ac, HT20 @MCS7 12.5 13 dBm 802.11ac, HT40 @MCS0 13 13.5 dBm 802.11ac, HT40 @MCS7 10.5 11 dBm 802.11ac, HT80 @MCS0 13 13.5 dBm 802.11ac, HT80 @MCS7 10 10.5 dBm Table 23: Conducted RF Receiving Sensitivity at 2.4GHz Frequency Receive Sensitivity (Typ.) 802.11b, 1Mbps TBD 802.11b, 11 Mbps -85 802.11g, 6Mbps TBD 802.11g, 54Mbps -73 802.11n, HT20, MCS0 TBD 802.11n, HT20, MCS7 -70 802.11n, HT40, MCS0 TBD FC20-N_Series_Hardware_Design 47 Confidential / Released 33 / FC20-N Series Hardware Design 802.11n, HT40, MCS7 -68 Table 24: Conducted RF Receiving Sensitivity at 5GHz Frequency Receive Sensitivity (Typ.) 802.11a, 6Mbps TBD 802.11a, 54Mbps -68 802.11ac,VHT20, MCS0 TBD 802.11ac,VHT20, MCS8 -68 802.11ac, VHT40, MCS0 TBD 802.11ac, VHT40, MCS9 -62 802.11ac, VHT80, MCS0 TBD 802.11ac, VHT80, MCS9 -57 4.6. Electrostatic Discharge The module is not protected against Electrostatic Discharge (ESD) in general. Consequently, it is subject to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and packaging procedures must be applied throughout the processing, handling and operation of any application that incorporates the module. FC20-N_Series_Hardware_Design 47 Confidential / Released 34 / FC20-N Series Hardware Design Mechanical Dimensions This chapter describes the mechanical dimensions of FC20 series module. 5.1. Mechanical Dimensions of the Module Figure 12: FC20 Top and Side Dimensions (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 35 / FC20-N Series Hardware Design Figure 13: FC20 Bottom Dimensions (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 36 / FC20-N Series Hardware Design 5.2. Recommended Footprint and Stencil Figure 14: Recommended Footprint (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 37 / FC20-N Series Hardware Design The recommended stencil design for FC20 series is shown as below. To ensure the module soldering quality, the thickness of stencil for the module is recommended to be 0.18mm. Figure 15: Recommended Stencil (Unit: mm) NOTES 1. For easy maintenance of the module, please keep about 3mm between the module and other components in host PCB. 2. Keep the RESERVED pins unconnected. FC20-N_Series_Hardware_Design 47 Confidential / Released 38 / FC20-N Series Hardware Design 5.3. Top and Bottom View of the Module Figure 16: Top View of the Module Figure 17: Bottom View of the Module NOTE These are design effect drawings of FC20 series module. For more accurate pictures, please refer to the module that you get from Quectel. FC20-N_Series_Hardware_Design 47 Confidential / Released 39 / FC20-N Series Hardware Design Storage, Manufacturing and Packaging 6.1. Storage FC20 series module is stored in a vacuum-sealed bag. The storage restrictions are shown as below. 1. Shelf life in the vacuum-sealed bag: 12 months at <40ºC and <90% RH. 2. After the vacuum-sealed bag is opened, devices that need to be mounted directly must be: Mounted within 72 hours at the factory environment of ≤30ºC and <60%RH. Stored at <10% RH. 3. Devices require baking before mounting, if any circumstance below occurs. When the ambient temperature is 23ºC±5ºC and the humidity indication card shows the humidity is >10% before opening the vacuum-sealed bag. Device mounting cannot be finished within 72 hours when the ambient temperature is <30ºC and the humidity is <60%. Stored at >10% RH. 4. If baking is required, devices should be baked for 48 hours at 125ºC±5ºC. NOTE As the plastic package cannot be subjected to high temperature, it should be removed from devices before high temperature (125ºC) baking. If shorter baking time is desired, please refer to IPC/JEDECJ-STD-033 for baking procedure. FC20-N_Series_Hardware_Design 47 Confidential / Released 40 / FC20-N Series Hardware Design 6.2. Soldering Push the squeegee to apply the solder paste on the surface of stencil, thus making the paste fill the stencil openings and then penetrate to the PCB. The force on the squeegee should be adjusted properly so as to produce a clean stencil surface on a single pass. To ensure the module soldering quality, the thickness of stencil for the module is recommended to be 0.18mm. For more details, please refer to document [5]. It is suggested that the peak reflow temperature is from 235ºC to 245ºC (for SnAg3.0Cu0.5 alloy). The absolute maximum reflow temperature is 260ºC. To avoid damage to the module caused by repeated heating, it is suggested that the module should be mounted after reflow soldering for the other side of PCB has been completed. Recommended reflow soldering thermal profile is shown below: ℃ Preheat Heating Cooling 250 Liquids Temperature 217 200℃ 200 40s~60s 160℃ 150 70s~120s 100 Between 1~3℃/S 50 50 100 150 200 250 300 Time (s) Figure 18: Reflow Soldering Thermal Profile FC20-N_Series_Hardware_Design 47 Confidential / Released 41 / FC20-N Series Hardware Design 6.3. Packaging FC20 module is packaged in a vacuum-sealed bag which is ESD protected. The bag should not be opened until the devices are ready to be soldered onto the application. 6.3.1. Tape and Reel Packaging FC20 is packaged in tape and reel carriers. The figures below show the packaging details. Figure 19: Tape Dimensions (Unit: mm) FC20-N_Series_Hardware_Design 47 Confidential / Released 42 / FC20-N Series Hardware Design Figure 20: Reel Dimensions (Unit: mm) Table 25: Reel Packaging Model Name FC20-N MOQ for MP Minimum Package: 250pcs Minimum Package × 4=1000pcs 250pcs Size: 370mm × 350mm × 56mm N.W: 0.203kg G.W: 0.945kg Size: 380mm × 250mm × 365mm N.W: 0.81kg G.W: 4.33kg FC20-N_Series_Hardware_Design 47 Confidential / Released 43 / FC20-N Series Hardware Design Appendix A References Table 26: Related Documents SN Document Name Remark [1] Quectel_FC20_EVB_User_Guide FC20 EVB user guide [2] Quectel_EC25_Reference_Design EC25 reference design [3] Quectel_EC21_Reference_Design EC21 reference design [4] Quectel_EC20_R2.0_Reference_Design EC20 R2.0 reference design [5] Quectel_Module_Secondary_SMT_User_Guide Module secondary SMT user guide Table 27: Terms and Abbreviations Abbreviation Description AP Access Point BPSK Binary Phase Shift Keying BT Bluetooth CCK Complementary Code Keying CTS Clear To Send ESD Electrostatic Discharge GND Ground HT High Throughput IEEE Institute of Electrical and Electronics Engineers IIL Input Leakage Current I/O Input/Output FC20-N_Series_Hardware_Design 47 Confidential / Released 44 / FC20-N Series Hardware Design LTE Long Term Evolution Mbps Million Bits Per Second MCS Modulation and Coding Scheme MOQ Minimum Order Quantity MP Manufacture Product PCB Printed Circuit Board PCM Pulse Code Modulation QAM Quadrature Amplitude Modulation QPSK Quadrature Phase Shift Keying RF Radio Frequency RH Relative Humidity RoHS Restriction of Hazardous Substances RTS Request To Send RX Receive Direction SDIO Secure Digital Input and Output Card TBD To Be Determined TX Transmitting Direction UART Universal Asynchronous Receiver Transmitter USB Universal Serial Bus VDD Voltage Power for Digital Device VHT Very High Throughput VIHmax Maximum Input High Level Voltage Value VIHmin Minimum Input High Level Voltage Value VILmax Maximum Input Low Level Voltage Value VILmin Minimum Input Low Level Voltage Value FC20-N_Series_Hardware_Design 47 Confidential / Released 45 / FC20-N Series Hardware Design VIO Voltage for Input/Output Port VOLmax Maximum Output Low Level Voltage Value VOHmin Minimum Output High Level Voltage Value VSWR Voltage Standing Wave Ratio Wi-Fi Wireless-Fidelity WLAN Wireless Local Area Networks FC20-N_Series_Hardware_Design 47 Confidential / Released 46 /
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 47 Language : zh-CN Tagged PDF : Yes Author : kelly Creator : Microsoft® Word 2010 Create Date : 2017:04:21 13:44:41+08:00 Modify Date : 2017:04:21 13:44:41+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools