R tron SIDENF800 iDEN Add-On Filter Box User Manual

R-tron Inc. iDEN Add-On Filter Box

Contents

Part 2

iDEN Add-On Filter Box User’s Manual -16- 3. Hardware Installation The installation procedure is as follows:  Check List of Items  Mounting  Grounding  RF Connection  Power up 3.1 Check List of Items Index Items Q’ty 1 iDEN Add-On Filter Box 1 2 Power Cord 1 3 Screws for Mounting 4 Items Figure 10. Items 1 2 3
iDEN Add-On Filter Box User’s Manual -17- 3.2 Mounting iDEN Add-On Filter Box is easy to mount using the assembled mounting bracket, which has Ø9 holes for the provided 5/16" fixing screws. Figure 11. Mounting 3.3 Grounding A screw at the bottom is intended for a building ground. Connect the ground cable to the screw. WARNING Dangerously high voltages may occur and damage the equipment if the equipment is not groundedproperly.
iDEN Add-On Filter Box User’s Manual -18- Figure 12. Grounding 3.4 RF Cable Connection a. Connect a cable from a donor antenna to the Input Port. b. Connect a cable from the Filtered Output Port to a repeater’s donor port Base StationService AntennaMobileiDEN Add- On Filter BoxRepeaterInputFiltered OutputDonorServiceDonor Antenna Figure 13. Configuration: RF Cable Connection

Navigation menu