Part 2
iDEN Add-On Filter Box 3. Hardware Installation The installation procedure is as follows: Check List of Items Mounting Grounding RF Connection Power up 3.1 Check List of Items Index Items iDEN Add-On Filter Box Power Cord Screws for Mounting Q’ty Items Figure 10. User’s Manual Items -16- iDEN Add-On Filter Box 3.2 Mounting iDEN Add-On Filter Box is easy to mount using the assembled mounting bracket, which has Ø9 holes for the provided 5/16" fixing screws. Figure 11. Mounting 3.3 Grounding WARNING Dangerously high voltages may occur and damage the equipment if the equipment is not grounded properly. A screw at the bottom is intended for a building ground. Connect the ground cable to the screw. User’s Manual -17- iDEN Add-On Filter Box Figure 12. Grounding 3.4 RF Cable Connection a. Connect a cable from a donor antenna to the Input Port. b. Connect a cable from the Filtered Output Port to a repeater’s donor port Donor Antenna Service Antenna Mobile Service Donor Repeater Figure 13. User’s Manual Filtered Output Input Base Station iDEN Add On Filter Box Configuration: RF Cable Connection -18-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 3 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:f5d11bf2-2882-4568-b7ab-0d4ca509426e Modify Date : 2007:04:03 21:22:44+09:00 Create Date : 2007:04:03 21:22:36+09:00 Metadata Date : 2007:04:03 21:22:44+09:00 Document ID : uuid:c6fef4d4-37fc-4a40-8e81-0c6562155c01 Format : application/pdf Title : untitled Producer : Acrobat Distiller 6.0.1 (Windows)EXIF Metadata provided by EXIF.tools