R tron SNGATEMLT PCS Repeater Repote Monitor System User Manual
R-tron Inc. PCS Repeater Repote Monitor System
R tron >
User Manual
GateOne Manual GateOne Contents 1. Configuration and Hardware connections .......................................................... 3 2. Setting for Command and Control ....................................................................... 4 3. Web GUI pages. ...................................................................................................... 8 4. Specifications ....................................................................................................... 14 Safety Precautions Opening the Tri MINI could result in electric shock and may cause severe injury. Warning Connect the equipment frame ground to building ground. Warning Operating the Tri MINI with antennas in very close proximity facing each other could lead to severe damage to the repeater. Safety Precautions Warning Caution RF EXPOSURE INFORMATION A minimum separation distance of 7.9 inches (20cm) must be maintained between the user and the external antenna of repeater to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov Caution This equipment is for indoor use and enables the communication wiring to communicate only inside the building. User’s Manual 1. Configuration and Hardware connections * Overall configuration ALARM UL Out put MON. LOCAL D L Outpu t MON. DONOR AN TENNA SERVIC E ANTENNA REMOTE AC I N 11 0 -1 2 5V ac DC OUT Note Power o utlet for compatible external devices only D A NGER R ISK O F EL ECTRI C SHO CK + 12V dc or -12 Vd c MA X 2A A LARM UL Out put MON. LOCAL DL Outpu t MON. D ONOR AN TENNA SERVICE ANTENNA RE MOTE AC IN 1 1 0 -1 25V ac DC OUT Note Power outlet for compatible external devices only DA NGER R ISK O F EL ECTRI C SHO CK + 12V dc or -12 Vd c MA X 2A A LARM UL Out put MON. LOCAL DL Outpu t MON. D ONOR AN TENNA GateOne SERVICE ANTENNA RE MOTE AC IN 1 1 0 -1 25V ac Note DA NGER R ISK O F EL ECTRI C SHO CK Power outlet for compatible external devices only DC OUT + 12V dc or -12 Vd c MA X 2A * Hardware connections ALARM UL Out put MON. LOCAL DL Outpu t MON. DONOR AN TENNA SERVICE ANTENNA REMOTE AC IN 11 0 -1 25V ac DC OUT Note Power outlet for compatible external devices only DA NGER R ISK O F EL ECTRI C SHO CK + 12V dc or -12 Vd c MA X 2A RSN-GATE-SGL ALARM UL Out put MON. LOCAL DL Outpu t MON. DONOR AN TENNA SERVICE ANTENNA REMOTE AC IN 11 0 -1 25V ac Note DA NGER R ISK O F EL ECTRI C SHO CK Power outlet for compatible external devices only DC OUT + 12V dc or -12 Vd c MA X 2A RSN-GATE-MLT * GateOne backwards compatibility with HB1900. 2. Setting for Command and Control * GateOne operates on a customer provided PC based platform with the following system requirements. Windows® XP Strong recommended 128 MB RAM or more Pentium Ⅲ processor or more keyboard RJ-45 jack Step 1 Open My Network Places. Step 2 Click the “View network connections”. Step 3 Push the right button of mouse and select the properties. Step 4 Click the properties of TCP/IP. Step 5 Set the values and OK as the following. Close all windows. Step 6 Open a new explorer window. Step 7 Type http://192.168.10.1:83 in the address box and press “Enter” key. Step 8 Login with “admin” of ID and “1234” of password and “OK”. 3. Web GUI pages. A. Security page Three logon passwords; Operator, Viewer, and Administrator, can be authorized on the security page. * Logon as Operator: An operator has all authorization of changing, monitoring, and controlling except parameters on the Security page. * Logon as Viewer: Viewer is able to show the information of MODEM box only. * Logon as Administrator: Administrator has all authorization of changing, monitoring, and controlling. B. Network page a. Cascade Code: Type in the pre-assigned code. Otherwise, you cannot access system setup. b. Location Information: Takes the latitude and longitude, otherwise you cannot access system setup. [Example] (‘Ν/S’ | ‘Ε/W’) (+|-) ddd.dddddd: (Latitude: N 39.006597 Longitude: W 122.152390) c. Product Information: This is for manufacturer used only. Do not change this value. d. NMC Server IP: Do not change the value. Otherwise Remote Access may not work. C. Modem page The Modem Page shows totally all information related with repeater and other devices. 10 D. Upload page The newest Web GUI and System firmware are able to be updated on this page. 11 E. Reboot page Clicking “Reboot System CPU” makes restart up the operating system on the Micro Processor Unit. 12 F. Logout Click the “Logout” and press the “OK” to exit current logon. 13 4. Specifications a. Electrical Specification Item Specifications CPU S3c2410A: 16/32-bit RICS NOR Flash: 4M byte NAND Flash: 32M byte SDRAM: 32M byte RJ-45 RJ-45 8port HUB Kyocera M200 DC +12V / Max 1A -10℃ ~ 50℃ -20℃~60℃ 95 % Memory Local Craft Port External Repeater port Modem Power supply Operating temperature Storage temperature Humidity Remark Boot Loader, Linux Kernel Ram disk, Application Program IEEE 802.3 10Base-T b. Mechanical Specification Item Dimension Weight Power Supply Connector Specification 180(W)x230(D)x80(H)_mm 7.08(W)x9.05(D)x3.15(H)_inch 2kg (4.4lbs) 4 pin AMP connector (female Type) Remark Not commercial product AMP 206430 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 About : uuid:4bf4d1a9-54ab-495c-8e3e-9b32add73894 Producer : Acrobat Distiller 6.0.1 (Windows) Modify Date : 2008:03:20 09:05:47-07:00 Create Date : 2008:03:05 18:59:03+09:00 Metadata Date : 2008:03:20 09:05:47-07:00 Document ID : uuid:80774cc0-6ea1-423f-adfa-20655c4edf7d Instance ID : uuid:a5820e15-a373-48e9-b6d9-917d9f6c9274 Format : application/pdf Title : untitled Page Count : 15EXIF Metadata provided by EXIF.tools