R tron SNIDEN25C iDEN Mini Signal Booster User Manual

R-tron Inc. iDEN Mini Signal Booster

Contents

Part 2

82. DescriptionSpecificationsItem SpecificationsÛ&aÛ&Û)aÛ)a5+Convection$&a96A Max / 6V, 12V, 27VDC a+]W\SLFDO0.5mA max.@110V AC EnvironmentalOperating TempHumidityCooling methodVoltage CurrentFrequencyLeakage Current The UDC (Up Down Converter) is basically a bi-directional amplifier that sharply filters out unwanted noise.2.2.3 UDC (Up Down Converter)900MHzDownlinkInput PortUplinkOutputPort800MHzUplinkInput PortDownlinkOutputPort900MHzUplinkInput Port800MHzDownlinkInput Port
9User’s Manual2. DescriptionThe MCU (Main Control Unit) is the control unit of iDEN MINI. It controls and monitors operational parameters. It is also responsible for generating an alarm, an event log and many other functions of the iDEN MINI.Pin MapPort Connected toiDEN 800 PLL, B/S, OUT DET, DL(Tx)/UL(Rx) HPA iDEN 900 PLL, B/S, OUT DET Alarms, LEDs MCU Vcc (+12V)Local PortRemote PortJ1J2J3J4J5J62.2.4 MCU (Main Control Unit)J3J4J5J6J1 J2
102. DescriptionThe HPAs (High Power Amplifiers) amplifies the transmitted signal from a base station at the final stage of the repeater and vice versa.A multiplexer is a device that combines two or more signals onto a common channel or medium to increase its transmission efficiency.Donor Antenna PortDownlink Port Uplink Port Downlink Port Uplink PortSever Antenna Port2.2.5 HPAs (High Power Amplifiers)2.2.6 Multiplexer900MHz800MHz800MHz900MHzRF InputRF OutputRF OutputRF Input
11User’s Manual2. Description3. Hardware InstallationThe installation procedure is as follows:• Check List of Items• Mounting• Grounding• RF Cable Connection• Power On3.1 Check List of ItemsRepeaterAC Cord Anchor BoltsWall Mounting Template UTP Cross LAN CableQuick GuideUser’s Manual3.1.1 ItemsIndex ItemsRepeaterAC CordAnchor BoltsWall Mounting TemplateUTP Cross LAN CableQuick GuideUser’s Manual1234567Quantity1141111
3. Hardware Installation12iDEN MINI is easy to mount using the assembled mounting bracket, which has 9 holes for the provided 5/16” fixing screws.3.2 MountingRemove the cover of double-coated foam tape squares at each corner on the back side of the template.Stick the provided template to the wall using the tape squares while adjusting the horizon.Mark the position for 4 screws depending on the installation location.Step 1Step 2Drill holes directly through the template.Step 3
13User’s Manual3. Hardware InstallationInstall the set anchor bolts or the plastic anchor bolts on the holes.Step 4Attach the mounting bracket to the wall using provided bolts or extra screws.Step 5
143. Hardware InstallationLean the iDEN MINI to hang the topside of the Guide Ring on the mounting bracket, and push toward the wall to mount.Step 6Fix the iDEN MINI using 8 screws provided.Step 7
15User’s Manual3. Hardware InstallationA rod on the left side is intended for a building ground.Connect the ground cable to the rod.NoteEnough isolation?Antenna isolation = Path loss between the server antenna port and the donor antenna portAntenna isolation Repeater max. gain +15dBIf antenna isolation < Repeater max. gain +15dB ĺ System oscillation or Low gainDangerously high voltages may occur and damage the equipment if the equipment is not grounded properly.Warning3.3 Grounding3.4 RF Cable ConnectionConnect a cable from a donor antenna to the DONOR ANTENNA Port.Connect a cable from a repeater’s service antenna to the SERVER ANTENNA Port.Step 1Step 2DO NOT connect or disconnect the coaxial cable while the power is on.Warning
RepeaterDonorAntennaPlugged in anAC outletDonorBase StationServer Mobile StationServerAntenna3.5 Power On163. Hardware InstallationConnect the power cord.Plug the power cord into a wall outlet.Power Switch turns on.Check if the green LED at the bottom turns on.Step 1Step 2Step 3Step 4Model Max Gain65dBRSN-iDEN-25-CMinimum required isolation 
17User’s Manual4. Operation4. OperationPower on the switch to “I”The switch is located on the bottom of the main body.Connect UTP Cross LAN Cable to a PC and the iDEN MINI.4.1 ConnectionsThe remote port allows remote users to access the repeater through an external monitoring device.Local port provides on-site access to the repeater.
184. Operation4.3.1 Windows XP4.3 Network SetupiDEN MINI operates on a customer provided PC based platform with the following system requirements :• Windows® 2000, Windows® XP or Windows® Vista• Internet Explorer 6.0(Recommended) or higher• 128 MB RAM or higher• Pentium Ɉ processor or higher• RJ-45 jack required4.2 System RequirementsClick the Start button and My Network Places.Step 1
19User’s Manual4. OperationClick View network connections.Step 2Right-click Local Area Connection to see a shortcut menuand click Properties.Step 3
204. OperationSelect Internet Protocol (TCP/IP) and click Properties.Step 4Check Obtain an IP address automatically and click OK.Step 5Close all windows.Step 6
21User’s Manual4. Operation4.3.2 Windows 2000Click the Start button, point to Settings, and then click Network and Dial-up Connections.Step 1Right-click Local Area Connection to see a shortcut menu and click Properties.Step 2
224. OperationSelect Internet Protocol (TCP/IP) and click Properties.Step 3Check Obtain an IP address automatically and click OK.Step 4Close all windows.Step 5
23User’s Manual4. Operation4.3.3 Windows VistaClick the Start button and Control Panel.Step 1Click Network and Internet.Step 2
244. OperationClick Network and Sharing Center.Step 3Click View status of Local Area Connection.Step 4
25User’s Manual4. OperationClick Properties and a caution pop-up window will appear. Click OK.Step 5Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.Step 6
264. Operation4.4 System Login Check Obtain an IP address automatically and click OK.Step 7Close all windows.Step 8Open your Web browser and type “192.168.0.1:83” into the URL address box. Then press the Enter key.Step 1
27User’s Manual4. OperationThe logon screen will appear. Type “operator” for the ID and “rtron” for the password and then click OK.Step 2The pop-up message for the login success will appear. Click OK.Step 3

Navigation menu