Part 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 910902 |
| Application ID | RLsYi8yDWYYdS3wPY9Jihw== |
| Document Description | Part 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 238.43kB (2980314 bits) |
| Date Submitted | 2008-03-07 00:00:00 |
| Date Available | 2008-03-08 00:00:00 |
| Creation Date | 2008-02-13 20:24:02 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2008-02-13 20:24:06 |
| Document Title | untitled |
2. Description Specifications Item Specifications Operating Temp Environmental Humidity Cooling method Voltage Current Frequency Leakage Current Ă&aĂ& Ă)aĂ) a 5+ Convection $&a9 6A Max / 6V, 12V, 27VDC a+]W\SLFDO 0.5mA max.@110V AC 2.2.3 UDC (Up Down Converter) The UDC (Up Down Converter) is basically a bi-directional amplifier that sharply filters out unwanted noise. Uplink Output Port 800MHz Uplink Input Port 900MHz Uplink Input Port 900MHz Downlink Input Port 800MHz Downlink Input Port Downlink Output Port The MCU (Main Control Unit) is the control unit of iDEN MINI. It controls and monitors operational parameters. It is also responsible for generating an alarm, an event log and many other functions of the iDEN MINI. J1 J2 2. Description 2.2.4 MCU (Main Control Unit) J3 J4 J5 J6 Pin Map Port Connected to J1 J2 J3 J4 J5 J6 iDEN 800 PLL, B/S, OUT DET, DL(Tx)/UL(Rx) HPA iDEN 900 PLL, B/S, OUT DET Alarms, LEDs MCU Vcc (+12V) Local Port Remote Port Userâs Manual 2. Description 2.2.5 HPAs (High Power Amplifiers) The HPAs (High Power Amplifiers) amplifies the transmitted signal from a base station at the final stage of the repeater and vice versa. RF Input RF Output RF Output RF Input 2.2.6 Multiplexer A multiplexer is a device that combines two or more signals onto a common channel or medium to increase its transmission efficiency. Downlink Port Uplink Port 900MHz 800MHz 800MHz 900MHz Donor Antenna Port 10 Downlink Port Uplink Port Sever Antenna Port 3. Hardware Installation 2. Description The installation procedure is as follows: ⢠Check List of Items ⢠Mounting ⢠Grounding ⢠RF Cable Connection ⢠Power On 3.1 Check List of Items Index Items Quantity Repeater AC Cord Anchor Bolts Wall Mounting Template UTP Cross LAN Cable Quick Guide Userâs Manual 3.1.1 Items Repeater AC Cord Wall Mounting Template Anchor Bolts UTP Cross LAN Cable Userâs Manual Quick Guide Userâs Manual 11 3. Hardware Installation 3.2 Mounting iDEN MINI is easy to mount using the assembled mounting bracket, which has 9 holes for the provided 5/16â fixing screws. 12 Step 1 Remove the cover of double-coated foam tape squares at each corner on the back side of the template. Step 2 Stick the provided template to the wall using the tape squares while adjusting the horizon. Mark the position for 4 screws depending on the installation location. Step 3 Drill holes directly through the template. Install the set anchor bolts or the plastic anchor bolts on the holes. Step 5 Attach the mounting bracket to the wall using provided bolts or extra screws. 3. Hardware Installation Step 4 Userâs Manual 13 3. Hardware Installation 14 Step 6 Lean the iDEN MINI to hang the topside of the Guide Ring on the mounting bracket, and push toward the wall to mount. Step 7 Fix the iDEN MINI using 8 screws provided. 3. Hardware Installation 3.3 Grounding A rod on the left side is intended for a building ground. Connect the ground cable to the rod. Warning Dangerously high voltages may occur and damage the equipment if the equipment is not grounded properly. 3.4 RF Cable Connection Step 1 Connect a cable from a donor antenna to the DONOR ANTENNA Port. Step 2 Connect a cable from a repeaterâs service antenna to the SERVER ANTENNA Port. Warning DO NOT connect or disconnect the coaxial cable while the power is on. Note Enough isolation? Antenna isolation = Path loss between the server antenna port and the donor antenna port Antenna isolation Repeater max. gain +15dB If antenna isolation < Repeater max. gain +15dB Äş System oscillation or Low gain Userâs Manual 15 3. Hardware Installation Model Max Gain Minimum required isolation RSN-iDEN-25-C 65dB  Donor Antenna Repeater Plugged in an AC outlet Base Station Donor Server 3.5 Power On 16 Server Antenna Step 1 Connect the power cord. Step 2 Plug the power cord into a wall outlet. Step 3 Power Switch turns on. Step 4 Check if the green LED at the bottom turns on. Mobile Station 4. Operation 4. Operation 4.1 Connections The remote port allows remote users to access the repeater through an external monitoring device. Power on the switch to âIâ The switch is located on the bottom of the main body. Connect UTP Cross LAN Cable to a PC and the iDEN MINI. Local port provides on-site access to the repeater. Userâs Manual 17 4. Operation 4.2 System Requirements iDEN MINI operates on a customer provided PC based platform with the following system requirements : ⢠WindowsÂŽ 2000, WindowsÂŽ XP or WindowsÂŽ Vista ⢠Internet Explorer 6.0(Recommended) or higher ⢠128 MB RAM or higher ⢠Pentium É processor or higher ⢠RJ-45 jack required 4.3 Network Setup 4.3.1 Windows XP Step 1 18 Click the Start button and My Network Places. Click View network connections. Step 3 Right-click Local Area Connection to see a shortcut menu and click Properties. 4. Operation Step 2 Userâs Manual 19 4. Operation 20 Step 4 Select Internet Protocol (TCP/IP) and click Properties. Step 5 Check Obtain an IP address automatically and click OK. Step 6 Close all windows. Step 1 Click the Start button, point to Settings, and then click Network and Dial-up Connections. Step 2 Right-click Local Area Connection to see a shortcut menu and click Properties. Userâs Manual 4. Operation 4.3.2 Windows 2000 21 4. Operation 22 Step 3 Select Internet Protocol (TCP/IP) and click Properties. Step 4 Check Obtain an IP address automatically and click OK. Step 5 Close all windows. Step 1 Click the Start button and Control Panel. Step 2 Click Network and Internet. 4. Operation 4.3.3 Windows Vista Userâs Manual 23 4. Operation 24 Step 3 Click Network and Sharing Center. Step 4 Click View status of Local Area Connection. Click Properties and a caution pop-up window will appear. Click OK. Step 6 Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 4. Operation Step 5 Userâs Manual 25 4. Operation Step 7 Check Obtain an IP address automatically and click OK. Step 8 Close all windows. 4.4 System Login Step 1 26 Open your Web browser and type â192.168.0.1:83â into the URL address box. Then press the Enter key. The logon screen will appear. Type âoperatorâ for the ID and ârtronâ for the password and then click OK. Step 3 The pop-up message for the login success will appear. Click OK. Userâs Manual 4. Operation Step 2 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 20 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:67aa870a-222b-4fb4-9637-31770cc4804b Modify Date : 2008:02:13 20:24:06+09:00 Create Date : 2008:02:13 20:24:02+09:00 Metadata Date : 2008:02:13 20:24:06+09:00 Document ID : uuid:014f6c15-4311-405a-9550-07f86c2a1374 Format : application/pdf Title : untitled Producer : Acrobat Distiller 6.0.1 (Windows)EXIF Metadata provided by EXIF.tools