R tron SNIDEN30 iDen Mini Wireless Repeater User Manual

Download:
Mirror Download [FCC.gov]
Document ID	794285
Application ID	S7aLDTSznUd67+U0JIu39Q==
Document Description	Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	280.93kB (3511604 bits)
Date Submitted	2007-05-21 00:00:00
Date Available	2007-05-21 00:00:00
Creation Date	2007-05-08 13:11:22
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-05-08 13:11:56
Document Title	untitled

iDEN MINI
2.2.4. MCU (Main Control Unit)
MCU is the control unit of iDEN MINI. It controls and monitors operational
parameters. It also generates alarms, an event log and many other
functions of the iDEN MINI.
Figure 8.
Main Control Unit
Pin Map
User’s Manual
Port
Connected to
J1
MCU Vcc(+12V)
J3
USB Port(Manufacturer use only)
J4
PSU Alarms
J5
Door Alarm
J6
Status LEDs
J7
iDEN 800 PLL,B/S,OUT DET
J8
iDEN 900 PLL,B/S,OUT DET
J9
Tx HPA
J10
Rx HPA
J11
RJ-45 port
-15-
iDEN MINI
2.2.5. Power Supply
The Power Supply Unit (PSU) supplies a steady DC power to iDEN MINI
by drawing power from the general in-wall AC outlets.
Figure 9.
Power Supply
Specifications
Item
Operating Temp
Humidity
Environmental
Cooling method
User’s Manual
Specifications
-10°C~50°C/14°F~122°F
20%~90%RH
Natural air
Voltage
AC110~125V
Current
6A Max / 6V, 12V, 27VDC
Frequency
Leakage Current
50~60Hz typ
0.5mA max.@110V AC
-16-
iDEN MINI
2.2.6. HPAs (High Power Amplifiers)
The High Power Amplifiers (HPAs) amplifies the transmitted signal from
a base station at the final stage of the repeater and vice versa.
Figure 10.
User’s Manual
HPAs(High Power Amplifiers)
-17-
iDEN MINI
3. Hardware Installation
The installation procedure is as follows:
„
Check List of Items
„
Mounting
„
Grounding
„
RF Connection
„
Power up
3.1 Check List of Items
Index
Items
iDEN MINI
Power Cord
Screws for Mounting
Template for marking of the pilot holes
Q’ty
Items
A -T Y P E
B -T YPE
B -T YP E
A -T Y P E
U se th is tem p la te to m ark
the lo c atio n fo r pilo t ho les
A -T Y P E
Figure 11.
User’s Manual
B -T YPE
B -T YP E
A -T Y P E
Items
-18-
iDEN MINI
3.2 Mounting
iDEN MINI is easy to mount using the assembled mounting bracket,
which has Ø9 holes for the provided 5/16" fixing screws.
Figure 12.
Mounting
Step 1.
Remove the cover of double-coated foam tape squares at each corner on
the back side of the template.
Step 2.
Stick the provided template to the wall using the tape squares while
adjusting the horizon.
Step 3.
Mark with a pen for the holes and drill the marks or drill holes directly on
the mark in the template.
Step 4.
Put the screws or bolts into the holes.
Step 5.
Mount the iDEN MINI on the right position.
CAUTION
Firmly affix the equipment on the wall of a building and Check necessary.
User’s Manual
-19-
iDEN MINI
3.3 Grounding
WARNING
Dangerously high voltages may occur and damage the equipment if the
equipment is not grounded properly.
A rod on the left side is intended for a building ground. Connect the ground
cable to the rod.
Figure 13.
Grounding
3.4 RF Cable Connection
User’s Manual
a.
Connect a cable from a donor antenna to the DONOR ANTENNA Port.
b.
Connect a cable from the SERVICE ANTENNA Port to a repeater’s
service antenna.
-20-
iDEN MINI
Donor
antenna
Base
Station
Repeater
Service
antenna
Plugged in an
AC outlet
Mobile Station
Donor
Figure 14.
Service
Configuration: RF Cable Connection
3.5 Power Up
a.
Connect the power cord.
b.
Plug the power cord into a wall outlet.
c.
Check if the green LED at the bottom turns on.
Figure 15.
User’s Manual
Power Cord Connection
-21-
iDEN MINI
4. Command and Control through the Hyper Terminal
4.1 Setting for Command and Control through the Hyper Terminal
Figure 16.
Local connection to the iDEN MINI
* iDEN MINI operates on a customer provided PC based platform with the following system
requirements.
Windows® 2000 or Windows® XP
128 MB RAM or more
keyboard
Pentium Ⅲ processor or more
RJ-45 jack
Step 1 Open My Network Places.
User’s Manual
-22-
iDEN MINI
Step 2 Click the “View network connections”.
Step 3 Push the right button of mouse and select the properties.
User’s Manual
-23-
iDEN MINI
Step 4 Click the properties of TCP/IP.
Step 5 Set the values and OK as the following. Close all windows.
User’s Manual
-24-
iDEN MINI
Step 6 Execute the Hyper Terminal.
Step 7 Name the session and OK.
Step 8 Select the TCP/IP (Winsock).
User’s Manual
-25-
iDEN MINI
Step 9 Set the values as the following and OK.
4.2 Command and Control through the Hyper Terminal
Step 1. To see the current status, hit “Enter” key only.
User’s Manual
-26-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:4cc82458-dbf9-4910-9c15-0fee01683787
Modify Date                     : 2007:05:08 13:11:56+09:00
Create Date                     : 2007:05:08 13:11:22+09:00
Metadata Date                   : 2007:05:08 13:11:56+09:00
Document ID                     : uuid:0ded00cf-952d-4227-80ae-c4105b1c5137
Format                          : application/pdf
Title                           : untitled
Producer                        : Acrobat Distiller 6.0 (Windows)

EXIF Metadata provided by EXIF.tools