RDI Technology WL892 WiFi Camera User Manual WL892

Download:
Mirror Download [FCC.gov]
Document ID	3332079
Application ID	J0lL/Fbzz4K5PICTzgDnrg==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.69kB (858633 bits)
Date Submitted	2017-03-24 00:00:00
Date Available	2017-03-27 00:00:00
Creation Date	2017-03-06 08:27:37
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2017-03-06 08:27:37
Document Title	Microsoft Word - WL892 user manual
Document Creator	PScript5.dll Version 5.2
Document Author:	tony

WL892 User Manual
WiFi camera
Android version
Camera Overview
Getting Start
1. Go to App store to download and install My HomeView into your Android
phone (support Android 4.1 or above).
2 Install and set up the camera
1) carefully unpack the camera
2) Attach power adapters to the cameras. Plug into power
3) Press “ reset” button on the back of the camera, the power LED flash quickly
3 There are two options to connect the camera with cell-phone: direct
connection and internet connection
3.1 Internet Connection
1) Make sure cell-phone is connected to the local network and the power LED of the
camera is in fast flash mode.
2) Enter My HomeView, press”+” to add camera, and touch smart config
3) Input the local network password on the pop-up, then input camera password
（000000）on next pop-up, touch “save” to complete the connection
Notice: while you first add the camera, to make the camera password more secure,
you need to change the password. Reset the new password and touch “Save”.
3.2 Direct connection
1) Press the “reset” button on the camera, the power LED will light up continuously.
2) Press “setting button” of your cell-phone to search the camera Wi-Fi, touch the
camera Wi-Fi to connect.
3) Enter My HomeView, and touch “+” to add the camera.
4) There are three ways to complete direct connection: search in local network, QR
code scan, manual input.
a. Search in Local network
Touch “ Search in local network”, it will automatically search the camera, then touch the
selected camera and get the camera name and DID, input the camera password(000000)
and press “Save” to complete the connection.
b. QR code scan
Touch QR code scan, and scan the QR code attached on the back of the camera, then
get the camera name and DID, input the camera password( 000000) and touch “Save” to
complete the connection.
c. Manual input
Touch Manual input, and get the camera name, input the DID attached on the back of the
camera and camera password (000000), then touch “Save” to complete the connection.
In any mode (power LED in any mode), press and hold the camera reset button for more
than 5 seconds will change camera to factory default mode, power LED will be in fast flash
mode.
4 In Live View
While the connection is completed, you can see the live video on the phone.
4.1 There are seven icons on live video.
1Snap shot Icon
2 View icon
: Touch this button, the video image you are watching will be saved
automatically on your smart phone memory card .
: press this icon to view Snapshot photos already taken
3 Talk-back icon
4 Resolution Setting
: press this icon to activate the two-way communication function
: tap this button to set video quality ( High or Low)
5 Manual Recording Button
: tap this button to manual recording, and tap again to
stop manual recording ( manual recording lasts 2
minutes every time, however, automatic record only
lasts 15 seconds per trigger )
6 light Icon
: tap this icon to control the LED light on or off.
7 Advanced Setting Button
: tap this button to enter advanced setting, you can
upgrade the camera firmware if necessary, modify
password, set sensitivity of motion detection, push
notification on or off, event list ( seeing the recording file),
file overwrite file(on or off), check SD Card Management,
Video Rotation, Time Zone, WLAN Networks, Light
Settings.
4.2 Some Important Submenus In Advanced Setting
1) Event list: touch “Event list” to check the recording file, the recorded videos enable to
be selected by time.
2) Video Rotation: the camera can be placed on a flat surface, wall or ceiling, you need to
set the video rotation (Normal, Flip Horizontally, Flip Vertically, 180 degree) for better
video image.
2) WLAN Networks: when your cell-phone and camera are in direct connection, you can
use WLAN network to choose a local router for the WF692, and change the camera to
internet mode.
Touch WLAN Networks and select the local network, input your local Wi-Fi password.
Press “Save” to complete setting.
While the camera is connected to the router, please restart the camera, and you will enable to
use any Wi‐Fi or GSM signal to see the video from the app.
4) Light Setting: you can set duration of the camera light (off, 1 minute, 3 minutes, 10
minutes), Dimmer ( 25%, 50%, 75%,100%)and Timer( the time for light on or off, repeat)
as per your preference.
5 . Notice
10
1 if you want to delete the camera, you can touch the right icon of the connected camera ,
and then choose delete.
2 You can inter the advanced setting directly by touch the icon of the connected camera,
and choose more. Details as following pictures show.
3 Once the advanced setting is completed, please remember to Press “ Save”and “OK” to
preserve the setting.
11
4 Default Wi‐Fi Camera: press “ reset” button of the camera for more than 5 seconds and
then release, the power LED will flash quickly. The default setting completes.
While the camera is in lost connection, please press the screen and pull down, it will
automatically reconnect (refresh).
Specification
Item
Specification
Power supply
Wi-Fi Frequency
DC
range
5V
±5%
2.412GHZ-2.462GHZ(Channel 1-11)
Wi-Fi Security
WPAPSK
Wi-Fi Standard
IEEE 802.11b/g/n,1T1R
Video Encode
H.264 VGA, 720P
Image Sensor Type
OV9712
CMOS Image Sensor
11b:<18dBm
Wi-Fi transmitting power
11g:<14dBm
11n:<13dBm
12
11M: -86dBm@8% （typical）
Receive Sensitivity(typical)
54M: -73dBm@10% （typical）
130M : -66dBm@10% （typical）
Transmission distance
Resolution
80m line of sight
720P(1280 x 720), VGA(640 x 480),
QVGA(320 x 240)
Speaker Output
Operating Temperature
Differential 8ohm/0.5W
-20°C ~ 60° (-4°F ~ 140°F)
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2017:03:06 08:27:37+08:00
Create Date                     : 2017:03:06 08:27:37+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WL892 user manual
Creator                         : tony
Document ID                     : uuid:94b3dce8-f53b-4e62-98bc-2973b960e430
Instance ID                     : uuid:86098d2b-1d0a-4c97-8182-1349ac9256e1
Page Count                      : 14
Author                          : tony

EXIF Metadata provided by EXIF.tools