RM Acquisition 01003A GPS navigation User Manual DES 1496 TND 765 User Manual 0106 061915 JS indd
RM Acquisition LLC GPS navigation DES 1496 TND 765 User Manual 0106 061915 JS indd
Contents
user manual Part 3
Hours of Service Hours of Service Feature Overview Service Cycle HOS timers displayed include: • 70hr: Time remaining until your 70-hour On-Duty limit is reached. • 11hr: Time remaining until your 11-hour Driving limit is reached. • 14hr: Time remaining until your 14-hour On-Duty limit is reached. • 8hr: Time remaining until your 8-hour On-Duty limit is reached before you must take a required 30-minute Off-Duty break. • 10hr Reset: Time remaining in the 10-hour Off-Duty and/or Sleeper Berth break period required after 14 hours of On-Duty status. • Split Reset: Time remaining in the break period for a split Sleeper Berth to complete. • 34hr Reset: Time remaining until your 34-hour reset is complete. - Tap ? next to 34-hr Reset to view when you are eligible to take advantage of the 34-hour reset rule, and what day and time the 34-hour reset will complete. • 30min Reset: Time remaining until your 30-minute Off-Duty break is complete. TND™ 765 Fleet Edition User Manual 29 Hours of Service Hours of Service Feature Overview More Timers Pop-up Window Tap More timers to view additional HOS timers: • Last 34 hour reset (start time): The time your last 34-hour reset started. • Last 34 hour reset (end time): The time your last 34-hour reset ended. • Can the 16hr rule be used? Indicates if you are eligible to use the 16hr rule, based on your current duty cycle. If you would like more information on whether your organization has enabled use of the 16hr rule, please contact your fleet manager. - Tap ? to view more details about your 16-hour eligibility. • Remaining projected drive time: Your available remaining Driving time. - Tap Today’s log to view the graph version of each day in the current 8-day period. For more information, see the Graph Sub-tab on page 37. • Hours gained back from 70hr after 12 A.M.: Amount of Driving time available to you starting at 12 A.M. the next day, based on the amount of On-Duty and Driving hours you’ve completed in the current 8-day period. - To get back to the Summary Tab, hit the Back button. 30 TND™ 765 Fleet Edition User Manual Hours of Service Hours of Service Feature Overview Today’s Log Main Screen - Graph Tab Today’s Log The Today’s log button can be access on the Service Cycle tab. Six tabs display across the top of the Today’s log screen. Graph is the tab that opens when you select Today’s log. This screen has two buttons: Edit and Add. • Edit. This button allows you to edit any uncertified log from the last 8 days (select the arrow buttons and to view a previous day’s log.) • Add. This button on the Today’s Log Graph screen allows you to add a current duty status to the current day. Any changes to earlier statuses must be made using the Edit button. • Certify. This button is used to Certify the log you are currently viewing. Note: Driving status time cannot be edited once recorded. TND™ 765 Fleet Edition User Manual 31 Hours of Service Hours of Service Feature Overview Service Cycle Service Cycle To update your current duty status: • Tap Off-duty for breaks or other required off-duty periods. • Tap S. Berth to enter sleeper berth mode. • Tap On-Duty to enter on-duty mode. The system automatically switches between On-Duty and Driving status while you progress through your day. 32 TND™ 765 Fleet Edition User Manual Hours of Service Hours of Service Feature Overview HOS Safe-driving Screen HOS Safe-driving Screen If you select the HOS icon from the Home Menu while driving, the HOS safe-driving screen will display, displaying your effective remaining drive time in large type to help minimize driver distraction. This time is the same time that displays on the status bar. If the 16-hour rule is enabled and you are using the rule while driving, two timers will be visible to display your effective remaining drive time. TND™ 765 Fleet Edition User Manual 33 Hours of Service Hours of Service Feature Overview Logs Tab - Title lists driver name and current duty status. indicates the currently selected day. indicates a revision has been made to the log in the Rand McNally Connect web portal that requires the driver to review and certify. indicates the log has been certified. - Date indicates the date of 24-hour log period. - Miles indicates the # miles driven in 24-hour log period. - Off-duty indicates time in off-duty mode. - S.B. indicates time in sleeper berth mode. - Driving indicates time in driving mode. - On-duty indicates time in on-duty mode. Logs: 8-day Duty Status Totals The Logs tab displays your duty status totals and total miles driven for each day in the current 8-day period. • Tap on a log entry to view the graph version of the log. 34 TND™ 765 Fleet Edition User Manual If a log entry is highlighted in orange, this indicates that the log entry has not yet been uploaded to the Rand McNally Connect web portal. To upload your current HOS logs (up to the current minute) to the Rand McNally Connect web portal, tap Options, then click the Send Logs button. The orange highlight will disappear once the logs are sent. Hours of Service Hours of Service Feature Overview Options Tab • Tap Change Trucks if you are going to be using a different truck with a different TND™ 765 device installed in it. This will ensure that the next truck you use will display your most up-to-date log information. • Tap Fax/Email HOS Logs to send logs to Law Enforcement. NOTE: You must certify all logs except for the current day’s log, and enter Roadside Audit mode before faxing or emailing your logs. • Tap DVIR to enter a new DVIR or review a previous entry. Options Tab The Options tab is where you can change modes for roadside inspections, personal conveyance, and more. • Tap Request HOS Logs to refresh your HOS logs if you have recently moved from truck to truck and your logs are not yet visible on the device. • Tap Request Last DVIR if you have received a replacement TND™ 765 device for the vehicle #, as the new unit will not have the last DVIR on it. • Tap Change Mode to enter Roadside Audit mode if you are showing your device to Law Enforcement, or Personal Conveyance mode if you are using your vehicle for personal use. • Tap Fuel Purchase to add fuel purchases. • Tap Send HOS Logs to upload your current HOS logs (up to the current minute) to the Rand McNally Connect web portal. TND™ 765 Fleet Edition User Manual 35 Hours of Service Hours of Service Feature Overview Company Tab Carrier Tab The Company tab displays your company information, terminal information and DOT number. This information is required for your electronic logs to be compliant. The information displayed here should have been pre-configured by your fleet manager. Carrier The upper half of the screen displays your company information, including Hours of Service Type and DOT number. • Name • Address • DOT Number Terminal The lower half of the screen displays your terminal information. This may be the same information listed in the Carrier section above. • Name • Address • Start: This field shows the time and time zone for the terminal, which is the time that your Hours of Service logs are based on. 36 TND™ 765 Fleet Edition User Manual Hours of Service Hours of Service Feature Overview Graph Sub-tab Graph: Day’s Log Graph The Graph sub-tab visually depicts the log from the selected day. • A red line on the graph indicates a log violation. • Tap and to scroll through the Graph log of each day for the last 8 days. and to move the green cursor on the graph. • Tap The corresponding duty status, time and location will display below the graph. • Tap Edit to make changes to a Duty Status. Driving status cannot be edited. - If the selected log is already certified, tap View to view details of Duty Status or Trip Info entries. • Add another duty status to the log you are currently viewing. • Tap Certify to certify the selected day’s log as correct, starting with the oldest day in the current 8-day period first. Once you certify a log, you cannot make any changes to that day’s log. • Tap Violations to view any violations that have occurred and the date and time of the violation. TND™ 765 Fleet Edition User Manual 37 Hours of Service Hours of Service Feature Overview List Sub-tab List: Day’s Duty Statuses The List sub-tab displays all duty statuses recorded on the selected day. • Tap and to scroll through Duty Status history List for each day in the current 8-day period. • Tap any Duty Status or Trip Info entry to view additional details. You can edit the entry if you have not yet certified the selected day’s log. Driving status cannot be edited. Duty Status Entries: - Time indicates time of duty status entry. Click the Time column heading to view the duration of each duty status. - Status indicates type of duty status (Off-Duty, Sleeper Berth, Driving, On-Duty). Note: Timer column can change to Duration if you tap Time/Duration. 38 TND™ 765 Fleet Edition User Manual Hours of Service Hours of Service Feature Overview Service Cycle Summary Totals for the Day: - Off-duty indicates total Off-Duty time. - S.B. indicates total Sleeper Berth time. - Driving indicates total Driving time. - On-duty indicates total On-Duty time. Running Totals for Day: - Remaining 70hr: Remaining time in 70-hour cycle as of the end of the selected day - Return to terminal count: If you use the 16-hour rule, this displays the number of returns to terminal recorded Summary: Day’s Duty Status Totals The Summary sub-tab shows the number of miles driven, Duty Status totals and running totals for various HOS rules for the selected day. • Tap and to view a summary of duty status totals for each day in the current 8-day period. TND™ 765 Fleet Edition User Manual 39 Hours of Service Hours of Service Feature Overview Trip Info Sub-tab Trip Info: Day’s Trip Information The Trip Info sub-tab displays the co-driver(s), trailer(s), bill(s) of lading, work miles and personal miles recorded on the selected day. • Tap and to scroll through the Trip Info for each day in the current 8-day period. - Co-driver(s): co-driver name(s) - Trailer(s): trailer ID(s) - BOL(s): Bill of Lading number(s) - Truck #: tractor number - Work Miles: Total number of miles put on the truck while on duty - Personal Miles: total miles driven in Personal Conveyance mode 40 TND™ 765 Fleet Edition User Manual Hours of Service Hours of Service Feature Overview Violations: HOS The Violations sub-tab displays any violations of Hours of Service rules. Anomalies: Driver or Sensor Issues The Anomalies sub-tab displays any errors recorded during the selected day such as system issues or driving recorded while the driver was not logged into the system. NOTE: If a system error occurs, you must keep paper logs during this period. TND™ 765 Fleet Edition User Manual 41 Hours of Service HOS: A Day in the Life of a Driver This section walks you through how to use the HOS application from the beginning of your day until the end of your day. (a) Trip Info Pop-up Window (b) Review DVIR Pop-up Window Complete a Pre-Trip entry (and certify DVIR) Enter a Trip Info entry to start your work day. This will start your 14-hour cycle and move you to On-Duty status. Once you enter a Trip Info entry, you should then review and certify the DVIR entry from the previous day. (a) Complete a Trip Info entry From the Summary screen, press Trip Info. • Enter Load, Trailers and Co-driver information. • Select Pre-Trip. • Press Submit. Your pre-trip is now complete! You are now in On-Duty status. (c) DVIR Pop-up Window (d) Final Certification Pop-up Window (b) Review DVIR after entering Trip Info If there are outstanding DVIR entries, a pop-up will appear asking if you would like to review your last DVIR. Click Yes. (c) Check to see if the last DVIR entry included any vehicle defects. Defects are vehicle maintenance issues that have been recorded. (d) If no defects were recorded: • Press Certify. - A pop-up will appear asking you to confirm that the vehicle can be operated safely. Click Yes if correct. 42 TND™ 765 Fleet Edition User Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2015:06:19 09:31:40-05:00 Metadata Date : 2015:06:30 16:33:01+08:00 Modify Date : 2015:06:30 16:33:01+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:8152e1f6-2830-4831-b5d3-401b816e7ee6 Original Document ID : xmp.did:FE90787CB8206811871F9ADEFF643667 Document ID : xmp.id:bd5b2600-212e-4d2d-afe5-309e718f3b63 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:7d6190ff-e8ec-416b-a7ad-2ba913de9be5 Derived From Document ID : xmp.did:7d6190ff-e8ec-416b-a7ad-2ba913de9be5 Derived From Original Document ID: xmp.did:FE90787CB8206811871F9ADEFF643667 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2015:06:19 09:31:40-05:00 Format : application/pdf Title : DES-1496_TND_765_User_Manual_0106_061915_JS.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 14 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools