RSI VIDEOTECHNOLOGIES BR51 Outdoor Proximity Reader User Manual

RSI VIDEOTECHNOLOGIES Outdoor Proximity Reader

User Manual

Made by RSI VIDEO TECHNOLOGIES Description The proximity reader can be placed in the interior or exterior because the electronic card is weather proof. This device is used for arming and disarming a VIDEOFIED® system. The recording of the badge reader in a recording area makes that area and all devices in that area subject to the entry and exit delays. Characteristics It is possible to record 19 badges, each badge takes the position of a user code. Example : 5 badges recorded + 4 keypad user codes, remaining 10 codes and/or badges available. In order to read the badge, the badge must be placed in contact with the reader surface for approximately half a second (a beep is emitted when the badge is read). Remark : The total starting up and stopping are handled by the badge readers ... BR means BR650 for USA/Canada, BR750 for Australia/Singapore and 1 Base to be fixed www.videofied.com BR250 for Europe and rest of the world. Fixing point of the protection against opening and pulling out Wall tamper punch out Magnet for tamper open on the reader Surface of the badge reader 2 screws for fixing Indicator LED Mocate “TOP-HIGH” PROGRAM Button The recording of the badge reader in a geographical recording area temporizes the latter. Recording of the proximity reader The alarm panel must be put in "Recording device mode", and t DEVICE”. he keypad must display “PRESS PROGRAM BUTTON OF 1 Fix the base with marks «TOP-HIGH», upwards. Fix the screw under the base matter part, so that the arming to be operational. 2 Insert, the first (lithium battery LS14500), wait for 2 beeps of the reader then insert the 2 other batteries (in the same direction). 3 Press the PROGRAM Button, release as soon as the indicator flashes. 4 Allocate a zone (with the keypad direction arrows), validation by the touch [YES]. 5 Give it a name and validate with the [YES] key. Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T
seconds the display will change BR250 for Europe and rest of the world. Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T Recording a new badge With the keypad, go to the menu : Display of the keypad Actions and commentaries Key in your (Installer or User level 3) code Place your badge on the reader until you hear two beeps then after a few Name this badge + Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the initial menu. Delete a code With the keypad, go to the menu : Display of the keypad Actions and commentaries Then to choose the concerned badge to select the badge. to accept the deletion Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the initial menu. BR651 for USA/Canada, BR752 for Australia/Singapore and www.videofied.com BADGE DELETED DELETING CODE ACCESS 5 DELETING BADGES / CODES ENTER A BADGE / CODE BADGE NAME BADGE OR CODE ENTER A BADGE / CODE BADGE OR CODE BADGES ACCES CODES Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T
BR250 for Europe and rest of the world. 3 Proximity Reader BR I N S T A L L A T I O N D A T A S H E E T Modify the level of a code (Requires a level 3 code) With the keypad, go to the menu : Display of the keypad Actions and commentaries The to choose the concerned badge and to select the badge. Then as many times as possible to select the required level. Then for 5 seconds to return to the initial au menu. BR651 for USA/Canada, BR752 for Australia/Singapore and www.videofied.com Reminder: LEVEL 1 = Arming, disarming and partials. LEVEL 2 and 3 = LEVEL 1 + Reading event logs + Changing date and time + Check of the correct functioning of the system LEVEL ACCESS 3 MODIFY NAME BADGE / CODES BADGE / CODE CONFIGURATION ENTER A BADGE / CODE Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T
immediate area) 2s, and that of the indicators fixed green light fixed green light Display of the beeps 4 times seconds Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T Functioning of indicators The complete functioning of the indicators is only possible with the aid of VISIO v5.2 / V6000 V31.02 or superior panels. At the arming At the disarming Problem was Everything is fine : An alarm triggered There was no alarm identified during Incomplete arming on the incomplete The top indicator arming (detection in flashes green for The two bottom flashes remain on with information for 5 and the reader for 5 seconds BR means BR651 for USA/Canada, BR752 for Australia/Singapore and BR250 for Europe and rest of the world. www.videofied.com The indicators goes off, the system is stopped. Flashing of the top red indicator (only) every second during temporisation. Then the top red indicator flashes every two seconds indicating that the system is well armed. The arming stops. The two indicators flashes green for 5s then goes off : A fault was detected. Verify the keypad in order to know more of what happened. Without action from the user, arming will start again after 3 min and the concerned detector by detection will be excluded from arming. In the reading of the badge, the reader emits a beep, then two beeps indicating the good consideration of the order. Then the indicators of the reader are going to indicate a message: In the reading of the badge, the reader emits a beep, then two beeps indicating the good consideration of the order. Then the indicators of the reader are going to indicate a message: I N S T A L L A T I O N D A T A S H E E T The two flashes green for thatimmediate area) arming (detection in
Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T Properties Panel Compatibility Visio, XT, XL, XT-IP, XV, XV-IP Power Requirements: Type C Nominal Voltage 3.6V Low battery limit 2.7V QTY and Battery Type Three 3.6V Lithium battery Battery type Lithium, LS14500 Battery life Up to 4 years Current Consumption: Standby 24uA Max 120mA RF Technology: S2View® Radio type Spread Spectrum Bidirectional RF Central Frequency 868MHz : BR250 (Europe, Africa, Asia) 915 MHz FHSS : BR651(USA, Canada, South America) 920MHz FHSS : BR752 (Australia, South America) Transmission Security AES algorithm encryption Supervision Polled signal every 8 minutes Antenna Integrated Tamper: Wall and cover tamper Display lightening: Automatic / 2 LED Built in sounder: Emits arm and disarm beeps Physical Data Operating temperature -30° to +60°C (-20°to140°F) Maximum relative humidity 95%, non-condensing Material Plastic : Polycarbonate UL94 Dimensions LxWxD 5 1/2 in. x 3 1/2in. x 1 1/2 in. (140 x 90 x 38mm) Weight: Detector 136g/4.8oz. – without battery Physical Protection IP65 Installation/Mounting Detector Two screws secure the Badge Reader to the base. Three screws secure base to flat mounting surface. Certifications & standards 868MHz - BR250 Standards : EN60950-1:2006+/A11:2009+/A1:2010 EN300220-1 V2.4.1 EN300220-2 V2.4.1 NF EN50130-4:1995+/A1:1998+/A2:2003; NF EN50130-5:1998 Classe II NF EN50131-2-3:2008 - Grade 2 NF EN50131-5-3:2005 - Grade 2 NF EN50131-6:2008 Grade 2 –Type C Certifications Europe CE / EN50131 Grade 2 Pays-Bas NCP Singapour IDA Afrique du Sud ICASA 915MHz FHSS - BR651 Certifications USA FCC Part 15C (FCC47 CFR Part 15) CANADA IC (RSS-200 Issue 8) 920MHz FFHS – BR702 Certifications Australia C-Tick www.videofied.com
Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T (EN) Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit English • Remove battery before any maintenance! • WARNING, there is a risk of explosion if a battery is replaced by an incorrect type! • Observe polarity when setting up the batteries! • Do not throw away used batteries! Dispose of them properly according to Lithium Metal requirements. Français • Retirez les piles avant toute opération de maintenance ! • Attention ! Il y a un risque d’explosion si l’une des piles utilisées est remplacée par une pile de type incorrect ! • Respectez la polarité lors de la mise en place des piles ! • Ne jetez pas les piles usagées ! Ramenez-les à votre installateur ou à un point de collecte spécialisé. Deutsch • Batterien vor jeglichen Wartungsarbeiten entfernen! • Vorsicht, es besteht Explosionsgefahr, wenn eine Batterie durch eine Batterie falschen Typs ersetzt wird! • Achten Sie beim Einsetzen der Batterien auf die Polung! • Entsorgen Sie Batterien nicht im normalen Haushaltsmüll! Bringen Sie Ihre verbrauchten Batterien zu den öffentlichen Sammelstellen. FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. www.videofied.com
Proximity Reader BR 250/651/752 I N S T A L L A T I O N D A T A S H E E T This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. EMEA SALES 23, avenue du Général Leclerc 92340 BOURG-LA-REINE FRANCE Hotline: +33 (0)820 846 620 Fax: +33 (0)1 82 69 80 10 USA SALES 1375 Willow Lake Blvd. #103 Vadnais Heights, MN 55110 USA Hotline: +1 877 206 5800 Fax: +1 651 762 4693 www.videofied.com © 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED® is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without noti

Navigation menu