RSI VIDEOTECHNOLOGIES BR51 Outdoor Proximity Reader User Manual

RSI VIDEOTECHNOLOGIES Outdoor Proximity Reader

User Manual

Made by RSI VIDEO TECHNOLOGIES
D
e
scr
i
p
t
i
o
n
The proximity reader can be placed in the interior or exterio
because the electronic card is weather proof. This device is use
d
for arming and disarming a VIDEOFIED
®
system. The recordin
g
of the badge reader in a recording area makes that area and al
l
devices in that area subject to the entry and exit delays.
C
h
a
r
a
c
t
e
r
i
s
t
ic
s
It is possible to record 19 badges, each badge takes the positio
n
of a user code. Example : 5 badges recorded + 4 keypad use
r
codes, remaining 10 codes and/or badges available.
In order to read the badge, the badge must be placed in contact
with the reader surface for approximately half a second (a bee
p
is emitted when the badge is read).
Remark : The total starting up and stopping are handled by the
badge readers ...
BR means BR650 for USA/Canada, BR750 for Australia/Singapore and
1
Base to be fixed
www.videofied.com
B
R
2
5
0
f
or
E
u
r
ope
and
r
es
t
o
f
t
h
e
w
o
r
ld.
Fixing point of the protection against
opening and pulling out
Wall tamper
punch out
Magnet for
tamper open on
the reader
Surface of the
badge reader
2 screws for fixing
Indicator LED
Mocate “TOP-HIGH”
PROGRAM Button
The recording of the badge reader in a
geographical recording area temporizes
the latter.
Recording of the proximity reader
The alarm panel must be put in "Recording device mode", an
d
t
DEVICE”.
he keypad must display “PRESS PROGRAM BUTTON OF
1
Fix the base with marks «TOP-HIGH», upwards.
Fix the screw under the base matter part, so
that the arming to be operational.
2
Insert, the first (lithium battery
LS14500), wait for 2 beeps of the reader then insert the
2 other batteries (in the same direction).
3
Press the PROGRAM Button, release as soon as the
indicator flashes.
4
Allocate a zone (with the keypad direction arrows),
validation by the touch [YES].
5
Give it a name and validate with the [YES] key.
Proximity Reader BR 250/651/752
I N S T A L L A T I O N
D A T A
S H E E T
se
c
on
d
s
t
h
e
d
i
s
p
l
a
y
w
il
l
c
ha
ng
e
BR250 for Europe and rest of the world.
P
r
o
x
im
i
t
y
R
e
ad
e
r
B
R 250/651/752
I
N
S
T
A
L
L
A
T
I
O
N
D
A
T
A
S
H
E
E
T
Recording a new badge
With the keypad, go to the menu :
Display of the keypad Actions and commentaries
Key in your (Installer or User level 3) code
Place your badge on the reader until you hear two beeps then after a few
Name this badge +
Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the
initial menu.
Delete a code
With the keypad, go to the menu :
Display of the keypad Actions and commentaries
Then to choose the concerned badge to select the badge.
to accept the deletion
Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the
initial menu.
BR651 for USA/Canada, BR752 for Australia/Singapore and
www.videofied.com
BADGE DELETED
DELETING CODE
ACCESS 5
DELETING
BADGES / CODES
ENTER A
BADGE / CODE
BADGE NAME
BADGE OR CODE
ENTER A
BADGE / CODE
BADGE OR CODE
BADGES
ACCES CODES
Proximity Reader BR 250/651/752
I
N
S
T
A
L
L
A
T
I
O
N
D
A
T
A
S
H
E
E
T
BR250 for Europe and rest of the world.
3
P
r
o
x
im
i
t
y
R
e
ad
e
r
B
R
I
N
S
T
A
L
L
A
T
I
O
N
D
A
T
A
S
H
E
E
T
Modify the level of a code (Requires a level 3 code)
With the keypad, go to the menu :
Display of the keypad Actions and commentaries
The to choose the concerned badge and to select the badge.
Then as many times as possible to select the required
level.
Then for 5 seconds to return to the initial au menu.
BR651 for USA/Canada, BR752 for Australia/Singapore and
www.videofied.com
Reminder:
LEVEL 1 = Arming, disarming and partials.
LEVEL 2 and 3 = LEVEL 1
+ Reading event logs
+ Changing date and time
+ Check of the correct functioning of the
system
LEVEL ACCESS 3
MODIFY NAME
BADGE / CODES
BADGE / CODE
CONFIGURATION
ENTER A
BADGE / CODE
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T
immediate area)
2s
,
a
n
d
t
h
a
t
o
f
t
h
e
indicators
f
i
x
e
d
gree
n
l
ig
h
t
fixed green light
Display of the
beep
s
4
me
s
seconds
Proximity Reader BR 250/651/752
I
N
S
T
A
L
L
A
T
I
O
N
D
A
T
A
S
H
E
E
T
Functioning of indicators
The complete functioning of the indicators is only possible with
the aid of VISIO v5.2 / V6000 V31.02 or superior panels.
At the arming At the disarming
Problem was Everything is fine : An alarm triggered There was no alarm
identified during Incomplete arming on
the incomplete The top indicator
arming (detection in flashes green for The two
bottom flashes remain on with
information for 5 and the reader for 5 seconds
BR means BR651 for USA/Canada, BR752 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
The indicators goes off, the system is stopped.
Flashing of the top red
indicator (only) every secon
d
during temporisation.
Then the top red indicator
flashes every two seconds
indicating that the system is
well armed.
The arming stops.
The two indicators flashes gree
n
for 5s then goes off : A fault wa
s
detected.
Verify the keypad in order to
know more of what happened.
Without action from the user,
arming will start again after 3
min and the concerned detector
by detection will be excluded
from arming.
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
I N S T A L L A T I O N D A T A S H E E T
The two
flashes green for
t
hat
immediate area)
arming (detection in
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T
Properties
Panel Compatibility
Visio, XT, XL, XT-IP, XV, XV-IP
Power Requirements:
Type C
Nominal Voltage 3.6V
Low battery limit 2.7V
QTY and Battery Type Three 3.6V Lithium battery
Battery type Lithium, LS14500
Battery life Up to 4 years
Current Consumption:
Standby 24uA
Max 120mA
RF Technology:
S
2
View
®
Radio type Spread Spectrum Bidirectional RF
Central Frequency 868MHz : BR250 (Europe, Africa, Asia)
915 MHz FHSS : BR651(USA, Canada, South America)
920MHz FHSS : BR752 (Australia, South America)
Transmission Security AES algorithm encryption
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper:
Wall and cover tamper
Display lightening:
Automatic / 2 LED
Built in sounder:
Emits arm and disarm beeps
Physical Data
Operating temperature
-30° to +60°C (-20°to140°F)
Maximum relative humidity
95%, non-condensing
Material
Plastic : Polycarbonate UL94
Dimensions
LxWxD
5 1/2 in. x 3 1/2in. x 1 1/2 in.
(140 x 90 x 38mm)
Weight: Detector
136g/4.8oz. – without battery
Physical Protection
IP65
Installation/Mounting
Detector
Two screws secure the Badge Reader to the base.
Three screws secure base to flat mounting surface.
Certifications & standards
868MHz - BR250
Standards
:
EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-3:2008 - Grade 2
NF EN50131-5-3:2005 - Grade 2
NF EN50131-6:2008 Grade 2 –Type C
Certifications
Europe CE
/
EN50131 Grade 2
Pays-Bas NCP
Singapour IDA
Afrique du Sud
ICASA
915MHz FHSS - BR651
Certifications
USA FCC Part 15C (FCC47 CFR Part 15)
CANADA IC (RSS-200 Issue 8)
920MHz FFHS – BR702
Certifications
Australia C-Tick
www.videofied.com
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T
(EN) Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit
English
•
Remove battery before any maintenance!
•
WARNING, there is a risk of explosion if a battery is
replaced by an incorrect type!
• Observe polarity when setting up the batteries!
• Do not throw away used batteries! Dispose of
them
properly according to Lithium Metal requirements.
Français
•
Retirez les piles avant toute opération de maintenance !
•
Attention ! Il y a un risque d’explosion si l’une des piles
utilisées est remplacée par une pile de type incorrect !
•
Respectez la polarité lors de la mise en place des piles !
•
Ne jetez pas les piles usagées ! Ramenez-les à votre
installateur ou à un point de collecte spécialisé.
Deutsch
• Batterien vor jeglichen Wartungsarbeiten entfernen!
•
Vorsicht, es besteht Explosionsgefahr, wenn eine
Batterie
durch eine Batterie falschen Typs ersetzt wird!
•
Achten Sie beim Einsetzen der Batterien auf die
Polung!
•
Entsorgen Sie Batterien nicht im normalen Haushaltsmüll!
Bringen Sie Ihre verbrauchten Batterien zu den öffentlichen
Sammelstellen.
FCC Regulatory Information for USA and CANADA
FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC
authorization to operate this equipment.
FCC Part 15.105 Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Radio frequency radiation exposure information according 2.1091
/
2.1093
/
OET bulletin 65
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be
installed and operated with minimum distance of 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
www.videofied.com
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) L'appareil ne doit pas produire de brouillage, et
(2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
EMEA SALES
23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
Hotline: +33 (0)820 846 620
Fax: +33 (0)1 82 69 80 10
USA SALES
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
USA
Hotline: +1 877 206 5800
Fax: +1 651 762 4693
www.videofied.com
© 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED
®
is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
S
2
View
®
is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without noti

Navigation menu