RSI VIDEOTECHNOLOGIES BR51 Outdoor Proximity Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2218031
Application ID	E1TYYQe+Fvoy8JhrnNH+4A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.67kB (270851 bits)
Date Submitted	2014-03-18 00:00:00
Date Available	2014-03-18 00:00:00
Creation Date	2014-03-07 13:52:13
Producing Software	GPL Ghostscript 9.05
Document Lastmod	2014-03-07 13:52:13
Document Title	08 Install sheet_BADGE READER_option paragraphe - modification - V2.0
Document Creator	PDFCreator Version 1.3.2
Document Author:	GeEu

Proximity Reader BR 250/651/752
I N S TA L L AT I O N
D ATA S H E E T
Made by RSI VIDEO TECHNOLOGIES
Description
Recording of the proximity reader
The proximity reader can be placed in the interior or exterior
because the electronic card is weather proof. This device is used
for arming and disarming a VIDEOFIED® system. The recording
of the badge reader in a recording area makes that area and all
devices in that area subject to the entry and exit delays.
The alarm panel must be put in "Recording device mode", and
the keypad must display “PRESS PROGRAM BUTTON OF
DEVICE”.
1 Fix the base with marks «TOP-HIGH», upwards.
Fix the screw under the base matter part, so
that the arming to be operational.
Characteristics
It is possible to record 19 badges, each badge takes the position
of a user code. Example : 5 badges recorded + 4 keypad user
codes, remaining 10 codes and/or badges available.
In order to read the badge, the badge must be placed in contact
with the reader surface for approximately half a second (a beep
is emitted when the badge is read).
Remark : The total starting up and stopping are handled by the
badge readers ...
Mocate “TOP-HIGH”
Insert, the first (lithium battery
LS14500), wait for 2 beeps of the reader then insert the
2 other batteries (in the same direction).
Press the PROGRAM Button, release as soon as the
indicator flashes.
Allocate a zone (with the keypad direction arrows),
validation by the touch [YES].
5 Give it a name and validate with the [YES] key.
PROGRAM Button
The recording of the badge reader in a
geographical recording area temporizes
the latter.
Base to be fixed
Indicator LED
2 screws for fixing
Surface of the
badge reader
Magnet for
tamper open on
the reader
Wall tamper
punch out
Fixing point of the protection against
opening and pulling out
BR means BR650 for USA/Canada, BR750 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
Proximity
Reader
BR BR
250/651/752
Proximity
Reader
250/651/752
I N S TA L L AT I O N DATA S H E E T
Recording a new badge
With the keypad, go to the menu :
Display of the keypad
Actions and commentaries
BADGES
ACCES CODES
Key in your (Installer or User level 3) code
BADGE OR CODE
ENTER A
BADGE / CODE
Place your badge on the reader until you hear two beeps then after a few
seconds the display will change
BADGE OR CODE
Name this badge +
BADGE NAME
Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the
initial menu.
Delete a code
With the keypad, go to the menu :
Actions and commentaries
Display of the keypad
ENTER A
BADGE / CODE
DELETING
BADGES / CODES
Then
to choose the concerned badge
DELETING CODE
ACCESS 5
to select the badge.
to accept the deletion
BADGE DELETED
Then repeat the operation for other badges or press on [ESC] for 5 seconds to return to the
initial menu.
BR651 for USA/Canada, BR752 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
Proximity
BR
Proximity
ReaderReader
BR 250/651/752
IINNSSTTAALLLLAATTIIO
ONN DDAATTAA SSHHEEEETT
Modify the level of a code (Requires a level 3 code)
With the keypad, go to the menu :
Display of the keypad
Actions and commentaries
ENTER A
BADGE / CODE
BADGE / CODE
CONFIGURATION
The
to choose the concerned badge and
to select the badge.
MODIFY NAME
BADGE / CODES
LEVEL ACCESS 3
Then
Then
as many times as possible to select the required
level.
for 5 seconds to return to the initial au menu.
Reminder:
LEVEL 1
= Arming, disarming and partials.
LEVEL 2 and 3 = LEVEL 1
+ Reading event logs
+ Changing date and time
+ Check of the correct functioning of the
system
BR651 for USA/Canada, BR752 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
Proximity Reader BR 250/651/752
N SS TTA
A LL LL A
ATT II O
ON
N D
DA
ATTA
A SS H
H EE EE TT
II N
Functioning of indicators
The complete functioning of the indicators is only possible with
the aid of VISIO v5.2 / V6000 V31.02 or superior panels.
At the arming
At the disarming
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
Problem was
identified during
the incomplete
Everything is fine :
Incomplete arming
arming (detection in
arming (detection
in
immediate
area)
immediate
area)
Display of the
information for 5
seconds
The arming stops.
The two indicators flashes green
for 5s then goes off : A fault was
detected.
Verify the keypad in order to
know more of what happened.
Without action from the user,
arming will start again after 3
min and the concerned detector
by detection will be excluded
from arming.
Flashing of the top red
indicator (only) every second
during temporisation.
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
An alarm triggered
on
The top indicator
flashes
green for
for
flashes green
2s, and that of the
bottom flashes
fixed green light
and the reader
beeps 4 times
There was no alarm
The
two
The two
indicators
remain on with
fixed green light
for 5 seconds
The indicators goes off, the system is stopped.
Then the top red indicator
flashes every two seconds
indicating that the system is
well armed.
BR means BR651 for USA/Canada, BR752 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
Proximity Reader BR 250/651/752
I N S TA L L AT I O N DATA S H E E T
Properties
Installation/Mounting
Panel Compatibility
Visio, XT, XL, XT-IP, XV, XV-IP
Detector
Two screws secure the Badge Reader to the base.
Three screws secure base to flat mounting surface.
Power Requirements:
Type
Nominal Voltage
3.6V
Certifications & standards
Low battery limit
2.7V
868MHz - BR250
QTY and Battery Type
Three 3.6V Lithium battery
Battery type
Lithium, LS14500
Battery life
Up to 4 years
Current Consumption:
Standards :
EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
Standby
24uA
Max
120mA
RF Technology:
Radio type
Central Frequency
NF EN50131-2-3:2008 - Grade 2
Spread Spectrum Bidirectional RF
NF EN50131-5-3:2005 - Grade 2
915 MHz FHSS : BR651(USA, Canada, South America)
920MHz FHSS : BR752 (Australia, South America)
AES algorithm encryption
Supervision
Polled signal every 8 minutes
Antenna
NF EN50130-5:1998 Classe II
S2View®
868MHz : BR250 (Europe, Africa, Asia)
Transmission Security
NF EN50130-4:1995+/A1:1998+/A2:2003;
Integrated
Tamper:
NF EN50131-6:2008 Grade 2 –Type C
Certifications
Europe
CE / EN50131 Grade 2
Pays-Bas
NCP
Singapour
IDA
Afrique du Sud
ICASA
915MHz FHSS - BR651
Wall and cover tamper
Display lightening:
Automatic / 2 LED
Built in sounder:
Emits arm and disarm beeps
Certifications
USA
FCC Part 15C (FCC47 CFR Part 15)
CANADA
IC (RSS-200 Issue 8)
920MHz FFHS – BR702
Certifications
Australia
Physical Data
Operating temperature
-30° to +60°C (-20°to140°F)
Maximum relative humidity
Material
Dimensions
C-Tick
95%, non-condensing
Plastic : Polycarbonate UL94
LxWxD
5 1/2 in. x 3 1/2in. x 1 1/2 in. (140 x 90 x 38mm)
Weight: Detector
Physical Protection
136g/4.8oz. – without battery
IP65
www.videofied.com
Proximity Reader BR 250/651/752
I N S TA L L AT I O N DATA SH E E T
(EN) Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit
Français
English
Deutsch
• Remove battery before any maintenance!
• Retirez les piles avant toute opération de maintenance !
• Batterien vor jeglichen Wartungsarbeiten entfernen!
• WARNING, there is a risk of explosion if a battery is
replaced by an incorrect type!
• Attention ! Il y a un risque d’explosion si l’une des piles
utilisées est remplacée par une pile de type incorrect !
• Vorsicht, es besteht Explosionsgefahr, wenn eine Batterie
durch eine Batterie falschen Typs ersetzt wird!
• Observe polarity when setting up the batteries!
• Respectez la polarité lors de la mise en place des piles !
• Achten Sie beim Einsetzen der Batterien auf die Polung!
• Do not throw away used batteries! Dispose of them
properly according to Lithium Metal requirements.
• Ne jetez pas les piles usagées ! Ramenez-les à votre
installateur ou à un point de collecte spécialisé.
• Entsorgen Sie Batterien nicht im normalen Haushaltsmüll!
Bringen Sie Ihre verbrauchten Batterien zu den öffentlichen
Sammelstellen.
FCC Regulatory Information for USA and CANADA
FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC
authorization to operate this equipment.
FCC Part 15.105 Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
www.videofied.com
Proximity Reader BR 250/651/752
I N S TA L L AT I O N DATA SH E E T
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1)
L'appareil ne doit pas produire de brouillage, et
(2)
L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
EMEA SALES
USA SALES
23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
Hotline: +33 (0)820 846 620
Fax: +33 (0)1 82 69 80 10
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
USA
Hotline: +1 877 206 5800
Fax: +1 651 762 4693
www.videofied.com
© 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED® is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
S2View® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without noti

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 7
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d08ac44f-a852-11e3-0000-47483d124d11
Producer                        : GPL Ghostscript 9.05
Keywords                        : ()
Modify Date                     : 2014:03:07 13:52:13+01:00
Create Date                     : 2014:03:07 13:52:13+01:00
Creator Tool                    : PDFCreator Version 1.3.2
Document ID                     : uuid:d08ac44f-a852-11e3-0000-47483d124d11
Format                          : application/pdf
Title                           : 08 Install sheet_BADGE READER_option paragraphe - modification - V2.0
Creator                         : GeEu
Description                     : ()
Author                          : GeEu
Subject                         : 

EXIF Metadata provided by EXIF.tools