RSI VIDEOTECHNOLOGIES XL00 Monitoring Device User Manual Product Catalog
RSI VIDEOTECHNOLOGIES Monitoring Device Product Catalog
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1249523 |
| Application ID | 4t6N9ghpOt9fVbvJG8pIbA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 166.92kB (2086549 bits) |
| Date Submitted | 2010-03-08 00:00:00 |
| Date Available | 2010-03-08 00:00:00 |
| Creation Date | 2010-01-25 09:56:21 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2010-01-25 09:56:31 |
| Document Title | Product Catalog |
| Document Creator | Adobe InDesign CS4 (6.0.4) |
Security System Made by RSI VIDEO TECHNOLOGIES Videofied ® - Model XL GPRS Document No. 2100-XL Jan. 2010 Installation Manual Subscriber linked to the monitor station by GPRS for video and audio confirmation XL GPRS means XL600GPRS for USA/Canada, XL700GPRS for Australia and XL200GPRS for Europe and rest of the world. EMEA Hotline : +33 (0)820 846 620 / UK : 0871 951 / Espagne : +34 90 166 77 00 USA Hotline : 877-206-5800 Contents Preamble...................................................................................... 1 1. Preparation before programming............................................ 2 2. The golden rules .................................................................... 3 3. Installation and programming ................................................. 3 3.1 Initialize the panel........................................................................3 3.2 Record the keypad......................................................................3 3.3 Close the panel cover ................................................................3 Regulatory Information for USA FCC Part 15 Changes or modifications made to this equipment not expressly approved by RSI Video Technologies may void the FCC authorization to operate this equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. 4. End of installation..................................................................... 7 • Increase the separation between the equipment and the receiver. • Connect the affected equipment and the panel receiver to separate AC power outlets, on different branch circuits. • Consult the dealer or an experienced radio/TV technician for help. 5. How to ... .................................................................................. 7 5.1 Program the partial mode ........................................................7 5.2 Delete the keypad......................................................................8 5.3 Register the keypad again on an XL panel .............................9 5.4 Activate/disactivate the flashing green light symbol . ..............9 5.5 Open the cover of an installed XL panel...................................9 5.6 IP TMT Configuration................................................................9 6. Detail of the menu : alarm codes........................................... 10 Signalisation des évènements par défaut.....................................10 7. Table of GPRS codes... ........................................................ 11 8. Numeric keypad... ................................................................. 12 For further information, consult the installation manual : - Installation data sheet “Keypad” - Installation data sheet “Indoor MotionViewerTM” - Installation data sheet “Outdoor MotionViewerTM” - Installation data sheet “Motion detector” - Installation data sheet “Indoor siren” - Installation data sheet “Outdoor siren” - Installation data sheet “Remote control” - Installation data sheet “Silent Panic Keyfob” - Installation data sheet “Proximity Reader” - Installation data sheet “Motion detector” - Installation data sheet “Control relay” - Installation data sheet “Smoke detector” - Installation data sheet “Synoptics of the menus” This device complies with Part 15 of the FCC Rulesand with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. RF Exposure Warning: During operation, the user has to keep a minimum separation distance of 20 cm with the RF devices. For Canada: Le présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Preamble The XL GPRS panel is specially designed for monitoring. It incorporates the main functions available in the VISIO panel range, including in particular: - Video verification - Radio range measurement - A 24/24 area - Automatically scheduled rearming (15 mins to 2 days) - The immediate processing of contacts opened during the arming. The XL panel is a comprehensive alarm panel which incorporates a GPRS/GSM transmitter, a 105dB siren, a microphone and a loud-speaker for audio verification, a touch-sensitive, back-lit keypad and a badge reader. • Characteristics of the XL panel The XL panel incorporates: - A GPRS/GSM transmitter - A badge reader (2 tags included) - A 105dB siren - A microphone and loud-speaker for audio verification The XL panel is powered by 8 LR20 alkaline batteries. The XL panel supports: - 19 codes or badges (users and installer) - 19 devices of all types without distinction, including the CMA keypad for programming. Powered by 8 LR20 alkaline batteries and linked to the detectors via a secure radio frequency, the XL panel is entirely wireless and, for normal uses, will operate independently for 4 years. All Videofied devices are compatible with the XL (except for the SE250 external siren, replaced by the SE250, and the RAR100). • Installation principles Siren and loud-speaker Microphone In order to be configured and installed on-site, the XL requires the temporary use of a CMA-type external keypad. This can be removed from the system once the installation has been completed, tested and approved. • How it works Once armed, an intrusion or ‘panic’ call sets off its integrated siren and informs the remote surveillance centre of the events detected. The centre’s operator can then view the videos available and request further audio verification once or a number of times. The operator can thus switch as he wishes from an audio session to a video session (provided he is using FRONTEL SERVICES or FRONTEL RECEPTION BAY). Touch-sensitive keypad Locking screw Badge reader The audio verification is carried out via a GSM call in full duplex. 1. Preparation before programming On a piece of paper : • Define the partial arming profiles (combinations of A geographical zone corresponds to a surface where all the sensors are armed/disarmed together. A partial arming profile is a combination of geographical zones which are either armed or not. By using the examples below, you are going to meet most of the requirements. • Ask the end user to prepare his/her codes (18 areas, see paragraph 5 and the partial programs on page 7). • Name the 4 geographical zones Area A magazine Area maximum access codes with 4 to 6 numbers per code). A person ENTRY DELAY ENTRY DELAY MAGAZINE RDC STOCK FLOOR or OFFICE DISCOUNT GARAGE (The1st geographical zone is inevitably delayed) • Name the devices Be as explicite as possible because in case of intrusion, it is this device’s name that will display on the keypad and transmit to the monitoring station. Example : CAM HALL ENTRANCE (for a camera at the entrance). • Allocate a geographical zone (from 1 to 4) to each device. 2. The golden rules The area 1 is always delayed. Never place the panel near an electric switchboard : there is possible interference with the radio and GPRS modem. Respect the installation height (under device) of MotionViewer and PIR pet immune : 2m10. Place the alarm panel at the most central location of the site to be protected (also garantees a better propagation of the radio). Installation height for external DCV cameras: 2m80 to 3m using the MB ball-and-socket joint (optional) and angling the camera at the target to be protected. 10 If you are using a remote keypad, don’t install it at the beginning of the installation When there is typing error, use the incorrect character. to delete the 11 Never record the same device twice without having first deleted the device off of the panel. Always clean the camera’s lens after installation (with a clean and dry piece of cloth, without pressing on the lens). 12 To change from Capital to lower case, first press the then change from small letter/capital letter with and vice- versa. 13 Be careful when opening and closing the panel cover (its components are fragile). Record a maximum of 19 devices of any kinds, without distinction (initial keypad included). Respect the installation height (under device) of PIR : 2m10 to 2m35, cameras MotionViewer : 2m10 to 2m35 (ideally in an unobstructed angle) 2. The golden rules 14 The keypad becomes inactive after 40 seconds of inactivity, in order to make the display to reappear, press on the [YES] key. 15 Use alkaline batteries for the panel and for the interior and exterior sirens. 16 The ITRA110/600 and DCVA200/600/700 (devices with pet immune) should never be placed in stairs, or near stairs. (Risk of untimely triggerings). 3. Installation and programming Open the packaging box and take out the cardboard divider which serves as a gauge. Position it level against the attachment fitting, making sure the arrow is pointing upwards. Mark the 5 points, remove the gauge and pierce the 4 attachment holes and the auto-protection hole. Attach the base. Insert the 8 alkaline batteries in their lodgings, paying attention to the correct alignment of the positive and negative charges. Base Hinges Before removing the front side of the packaging box, insert the SIM card (voice/data or GSM/GPRS) as illustrated in figures 1 and 2. Figure 1 Figure 2 Assemble the front side with the base by positioning the hinges on the base. 3.1 Initialize the panel • Insert the power cable into the power connection (the panel emits a beep) and the keypad lights up and flashes. • Alkaline batteries Power connection Hold down the PROGRAM BUTTON on the panel for 10 seconds untiil the keypad beeps again and lights up all the keys of the panel keypad. • Briefly press the PROGRAM BUTTON of the panel again to switch to keypad registration mode. 3.2 Record the keypad (cf. Keypad installation manual) • Insert the 3 Lithium LS14500 batteries in the keypad. Power cable • Do not fix the keypad, it will help you in the recording and setting of the devices. • Simultaneously press on [CLR] and [ESC NO] buttons on the keypad, until the keypad’s indicator flashes and then release. 3.3 Close the panel cover • Screw in the screw on the left of the box. PROGRAM Button Videofied Security Syste m I n sta l l a t i o n M a n u a l 300 3. Installation and programming Display of the keypad Actions and commentaries KEYPAD 1 RECORDED < - LANGUAGE - > ENGLISH Verify the range : A regular flashing or a value of 2/5 or better indicates a sufficient RF radio. RADIO RANGE TEST ? RADIO RANGE x/9 to select the language. Wait for 10s in order to obtain the first stable value RADIO RANGE 9/9 In order to stop the test. RADIO RANGE TEST ? ENTER THE INSTALLER CODE Wait 4 TO 6 DIGITS THEN YES Wait INSTALLER CODE : CODE NAME : ADJUSTING TIME AND DATE DATE (Year) : 00/ / CONNECTED TO MONITOR STATION? Installer code + , then confirm : Code + Naming the code + (Becareful, some NAMES correspond to preprogramming of key accounts. (In case of incorrect setting, please contact your technical department). Wait Use direction arrows right or left to increase the numbers and the [YES] key to validate the value and move to the next. Do the same for the Month, the Day, the Time and the Minutes. 3. Installation and programming Display of the keypad ACCOUNT NUMBER : Keypad Programming Actions and commentaries Enter the Transmittor code + PERIODIC TEST PERIODIC TEST : 24 HOURS to change the period + TEST HOUR : 00 to increase hours + CODE/STATE MODIFICATION ? ENTER YOUR I.D. : , and do the same for minutes. or (to modify the event transmission status,and the on/off controls, refer to Chapter 6.Details on the alarm codes menu, page 10). Wait NAME OR ADDRESS Enter “name” or “address” + optional data only). NAME OR ADDRESS ENTRY COMPLETE Wait (Name of the client, informative and AREA CONFIGURATION Enter the name of the geographic area 1 + AREA NAME 1 : Do the same for other areas, turn to if need be to paragraph 1 “1.Preparation before programming”, page 2. EXIT DELAY : 45 sec to modify the value + ENTRY DELAY : 15 sec to modify the value + GPRS PARAMETERS ? Videofied Security Syste m I n sta l l a t i o n M a n u a l 500 3. Installation and programming By default your GPRS panel has parameters of the ORANGE operator. It is necessary to modify the 3 parameters that characterise the connection to another operator (SFR or BOUYGUES, WYLESS, T-MOBILE, ATT...). Remark : GPRS Parameters is Case Sensitive ! (use the M/m key of the keypad to change Capital /Small letters). Be careful : Use arrows to change from one parameter to the other. Press on the [YES] key only when you want to modify a parameter! ORANGE SFR BOUYGUES ........................ APN internet-entreprise m2minternet a2bouygtel.com ........................ USER orange Open field Open field ........................ PASS orange Open field Open field ........................ (The APN is given by your operator. These parameters are likely to change following the SIM card used. Ask your operator.) Display of the keypad Actions and commentaries APN CODE internet-entrepr You are going to enter various parameters depending on which GPRS operator’s SIM card you have. USER NAME orange PASSWORD orange IP1 ADRESS 0.0.0.0 DOMAIN NAME 1 PORT 1 888 GPRS PARAMETERS ? GPRS LEVEL TEST IN PROGRESS END = YES GPRS LEVEL 5/5 PRESS PROGRAM BUTTON OF DEVICE The first parameter is the APN code. By default, the standard public access parameters are those of Orange. Press [YES] to modify the value or the right arrow to move on to the next parameter. Second parameter: USERNAME Third parameter: PASSWORD The IP1 address or the domain name and Port 1 are provided by the monitoring station. Likewise for the IP2 address and the IP TMT address if applicable. Once the values have been established, Press the to return to the PARAMETRES GPRS menu. to exit the menu. Press the and wait for the reception level. Do not remove the SIM card during the test! Wait (this could last for 3 minutes) for the result of the test which can be : - a level between 1/5 and 5/5 - an error code (in this case, call you technical support) It is not advisable to install a panel whose level is inferior to 3/5. Record your devices : (please refer to installation data sheets of each device). 4. End of installation You have recorded and fix all the devices, record the remote controls, then with the question : Display of the keypad Actions and commentaries ENTERING A NEW DEVICE ? OPERATION COMPLETED ? (Close the cover of the panel) SYSTEM CHECK IN PROGRESS All that remains is to program the user codes, Partial arming modes and eventually the Intercom time (at 180 seconds). INSTALATION SUCCESSFUL ! You can now close the XL panel, making sure you fully tighten the screw on the left-hand side. 5. How to... 5.1 Program partial mode With the direction arrows go to the menu CONFIGURATION (niv 4) -> ALARM PROGRAMMABLES -> FULLY ARMED MODES Areas : 1 2 3 4 Each time you press on the number of the area it modifies the correspondance. State : A A A A Situated below. Validation at the end, the [YES] key. Then use the direction arrows to select the relevant arming mode and the [YES] key to modify it. Armed There are three possible arming modes. Disarmed NORMAL MODE is the general arming mode, set using a badge or with a user code and keys or MODE SPECIAL1 is a partial mode activated by entering a user code and pressing the . This mode is also accessible on a CMA keypad via the and via an RC remote control via the SPECIAL2 MODE is not accessible on the keypad of an XL panel. It is available on a CMA keypad via the and via an RC remote control via the For each arming mode, it is possible to specify how each of the 4 zones will be armed and how the sound alert will be made. Videofied Security Syste m I n sta l l a t i o n M a n u a l Perimeter (all the opening contacts) External (opening contacts protecting an exterior access) Siren Delay beeps Immediate triggering of all sirens Entry/Exit delay beeps, then triggering of the sirens Silent Without siren without beeps Without Beeps on the siren keypad only PERIMETRIE MODE is not accessible on the XL keypad. It is only availble on the CMA deported keypad by + user code + [YES]. 700 5. How to ... 5.2 Delete the keypad Display of the keypad Actions and commentaries ACCESS LEVEL ACCESS LEVEL LEVEL : 3 => 4 BADGE OR CODE ACCESS LEVEL Use the right arrow to increment the level to 4. Enter the installer code + Use the right arrow to go to the CONFIGURATION menu. CONFIGURATION BADGE OR CODE GENERAL PARAMETERS Enter the installer code + Press the left arrow twice to go to the ZONES AND DEVICES menu. AREAS AND DEVICES DEVICES ADD A NEW DEVICE to go to the DEVICE CONFIGURATION menu. DEVICE CONFIGURATION Z1:KEYPAD KEYPAD 1 (If necessary, use the direction arrows to select the keypad). DELATE KEYPAD < = = = = XX = = = = > 00 You can remove the keypad batteries. 5. How to ... 5.3 Register again a CMA keypad on an XL panel without opening the cover Activate the touch-sensitive keypad by placing your hand over it. Enter in special mode by pressing for 3 seconds on the and the numerical keypad starts to flash. Type the code 000000 then to switch the XL panel in keypad registration mode. On the keypad: - Insert the 3 Lithium LS14500 batteries. - Simultaneously press [CLR] and [ESC NO] on the keypad untiil the indiicator light on the panel flashes and then release. 5.4 Activate or disactivate the flashing green battery symbol It is possible to activate or disactivate the flashing green battery symbol. Bear in mind that when this symbol is activated, the product has less battery life and the batteries will have to be changed within 4 years. Enter in special mode by pressing for 3 seconds on the and the numerical keypad starts to flash. Type the code 000100 then the digital keypad will remain illuminated while the green battery symbol starts to flash with the number 0 or 1 on the 7-segment digit. The number shown is an indication of the display configuration for the battery symbol (0 for disactivated, 1 for activated). Display of the keypad Actions KEYPAD 1 RECORDED INSTALLATION CODE Enter the installer code + 5.5 Open the cover of an installed XL panel Unscrew the screw on the left-hand side of the panel and separate the panel of the base. 5.6 IP TMT Configuration You need a computer connected to the network IP, configured either on a fixed address IP with the opened port 888 is needed, or on a name of domain with the opened port 888. About the programming of the panel, it is necessary either to inform on the IP TMT your fixed IP, or on DOMAIN NAME your domain name. The computer connected on your network has to have the software Fontel TMT installed and parametrized. The connection by seizing 999999 + [OK] on the panel XL, either on the keypad CMA (if it is on the site). In Frontel TMT make: File / open, a window opens with the account N ° (code transmitter). Click above, validate the request of remote maintenance by clicking on OK, then to make an import to get back the programming of the site. Videofied Security Syste m I n sta l l a t i o n M a n u a l 900 6. Details of the menu : ALARM CODE Signalling events by default (except if you are using pre programming) In all cases, be sure to check that the configuration of your XL system is suitable for your needs. By default are not transmited: By default these events are transmited: INITIALIZATION DEVICE (intrusions) ALERT (button) TAMPER PERIODIC TEST PANEL BATTERIES (low panel batteries) AC POWER (panel power off) PHONELINE FAULT (telephone) DEVICE BATT. (low batteries devices) RADIO JAMMING (radio jamming) There are the 3 transmission states: SUPERVISION (default supervision) ALARM, which can be heard : when it appears WRONG CODES (when entering 5 false codes/badges) ALARM / END, which can be heard : when it appears and disappears ALARM MEMORY (old memory overwritten) DURESS CODE (panic button) ARM/DISARM (open/close) NOT TRANSMITTED Examples : - If one wishes to recall events of ARMING/DISARMING (operate/stop), you will have to modify the configuration of events ARMING/DISARMING to ALARM / END. - If you wish to recall the false codes information, you will have to modify the configuration of events WRONG CODES on the state ALARM. How to modify the transmission state of events? 2 possible solutions: • At installation, just after having validated the hour of the cyclic test, the keypad requests : CODE/STATE MODIFICATION ? Press on the to access the menu TRANS. STATE MODIFICATION • After the initial installation, by using the keypad : With direction arrows go to the menu CONFIGURATION (level 4) -> CONFIGURATION MONITOR. STATION -> ALARM CODES -> TRANS. STATE MODIFICATION Then: With direction arrows Select the event to transmit, make then modify the transmission state with arrows and revalidate with the [YES] key. Renew the operation for each event which you wish to modify the transmission regulations. 7. Table of GPRS error code correspondances !!! The PIN code of the SIM cards must either be disactivated or be 0000 !!! During the GPRS level test, if there is an error an associated code appears in place of the the GPRS level. Start the test again after first error. GPRS LEVEL : ERROR XXX In case of GPRS error, we recommend you continue installation by recording of detectors and devices and then come back to the GPRS level test. Table of correspondance error codes Codes Errors 03 ou 04 No network coverage or no SIM card GPRS data 010 SIM non inserted 011 Code PIN necessary -> The PIN code must be disactivated 012 Code PUK necessary, SIM card blocked 013 Default SIM card 014 SIM card busy 015 Error on SIM 016 Incorrect password 017 SIM PIN2 necessary -> The PIN code must be disactivated 018 SIM PUK2 necessary 022 SIM not found 030 No network coverage or no SIM card GPRS data 040 : 047 SIM card non inappropriate or blocked -> Unlock with PUK code 149 Authentification error -> Incorrect Network problem or parameters (APN, USER, ...) 107 Service data GPRS non authorised -> SIM card unsuitable Codes Errors 043 Typographical error in the APN Code username or password 003 SIM card not detected/no inserted 132 SIM card not activated 030 No GPRS signal 915 MHz codes 11 8. Numeric Keypad Symbols Explanations • When the indicator light is green: indicates that all the batteries (panel + peripheral) are OK • When the indicator light is red: indicates that there is a battery fault either on the panel or on a peripheral device (the N° will be indicated on the display) • During arming: signals the detection of a peripheral device in a zone not on a time setting • Not armed: signals the auto-protection of a peripheral device (the N° will be indicated on the display) Used in order to identify: • N° of the peripheral device (0 for the panel and 1 to 19 for the peripheral devices) in the vent of auto-protection, intrusion, low battery, etc. • Incorrect authentification (‘C’ for wrong code) Indicates that there has been an intrusion Indicates any other fault (radio interference, ect.) Symbols Explanations Used to disarm the system (after entering the code) • Enables arming in partial mode (after entering the code) • Flashes when the system is partially armed • Enables arming in total mode (after entering the code) • Flashes when the system is totally armed Enables arming in total mode (after entering the code) Symbols Explanations Key to be held down for 3 seconds to activate panic buttons Once it lights up, pressing this key will send a police call through to the monitoring station Once it lights up, pressing this key will send an emergency call through to the operators Once it lights up, pressing this key will send an emergency call through to the operators This key allows you to cancel the activation of the panic buttons Symbols Explanations àD Keys for entering user codes Key for confirming code Delete key in case off error Using the numeric keypad: to conserve the batteries, the numerical keypad automatically turns off after a few seconds of not being used. Before entering the code, you need to reactivate it. To do so, place your hand flat over the numeric keypad, it will light up and then you can use it. EMEA SALES 23, avenue du Général Leclerc 92340 BOURG-LA-REINE FRANCE Hot line : +33 (0)820 846 620 Fax : +33 (0)3 90 20 66 36 00 North American Headquarters 4455 White Bear Parkway, Suite 700 White Bear Lake, MN 55110 USA Hot Line : 877-206-5800 Fax : 651-762-4693 www.videofied.com © 2009 RSI Video Technologies Videofied® is a Registered Trademark of RSI Video Technologies. Specifications subject to change without notice.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2010:01:25 09:56:21+01:00 Metadata Date : 2010:01:25 09:56:31+01:00 Modify Date : 2010:01:25 09:56:31+01:00 Creator Tool : Adobe InDesign CS4 (6.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9946 bytes, use -b option to extract) Instance ID : uuid:55dfab2a-069a-4f2f-b5b6-149bbc8abd79 Document ID : adobe:docid:indd:05c8fdbb-245d-11dc-b61a-89f5d767cbb0 Original Document ID : adobe:docid:indd:05c8fdbb-245d-11dc-b61a-89f5d767cbb0 Rendition Class : proof:pdf Derived From Instance ID : 774abd32-20eb-11dc-b8bb-c6826c08de1d Derived From Document ID : adobe:docid:indd:d88b00b6-20b2-11dc-b8bb-c6826c08de1d History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:226E08F69135DE11BBB1BEC40C0D7231, xmp.iid:236E08F69135DE11BBB1BEC40C0D7231, xmp.iid:D49E9845D549DE11919BC76B190D3DD8, xmp.iid:11907B42C44ADE118175F7B96B01662B, xmp.iid:079B27362D6ADE119F399240BB02912B, xmp.iid:492FCE53D86ADE118656B9CA59F09CEB, xmp.iid:42D6F517F09DDE118FCCDC1FF0046A0E, xmp.iid:6D1F473355BDDE11AC129028CD7A2247, xmp.iid:046900643BD8DE11B4FCAEF9B715FC17, xmp.iid:056900643BD8DE11B4FCAEF9B715FC17, xmp.iid:066900643BD8DE11B4FCAEF9B715FC17, xmp.iid:1551F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1651F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1751F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1851F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1A51F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1B51F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1C51F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1D51F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:1E51F8ECD6D8DE1198859046CEFDF1F4, xmp.iid:79FB951404D9DE1198859046CEFDF1F4, xmp.iid:7AFB951404D9DE1198859046CEFDF1F4, xmp.iid:04BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:05BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:06BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:07BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:08BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:09BFE51506D9DE11A1D3D08BA05B5699, xmp.iid:0ABFE51506D9DE11A1D3D08BA05B5699, xmp.iid:7AD40DB0E8EADE118617A358F914AFC3, xmp.iid:7BD40DB0E8EADE118617A358F914AFC3, xmp.iid:7CD40DB0E8EADE118617A358F914AFC3, xmp.iid:7DD40DB0E8EADE118617A358F914AFC3, xmp.iid:7ED40DB0E8EADE118617A358F914AFC3, xmp.iid:7FD40DB0E8EADE118617A358F914AFC3, xmp.iid:80D40DB0E8EADE118617A358F914AFC3, xmp.iid:5A46C43C0EEBDE11AD81809CA306EA2C, xmp.iid:5C46C43C0EEBDE11AD81809CA306EA2C, xmp.iid:5D46C43C0EEBDE11AD81809CA306EA2C, xmp.iid:90DF5B6209EFDE118DB9BFE809450E63, xmp.iid:9B819D4CAF01DF11B25DBDBCD56D5CB4, xmp.iid:9C819D4CAF01DF11B25DBDBCD56D5CB4, xmp.iid:9D819D4CAF01DF11B25DBDBCD56D5CB4, xmp.iid:1CED4D8C6806DF11A31AA929F93464CD, xmp.iid:1DED4D8C6806DF11A31AA929F93464CD, xmp.iid:1EED4D8C6806DF11A31AA929F93464CD, xmp.iid:1FED4D8C6806DF11A31AA929F93464CD, xmp.iid:21ED4D8C6806DF11A31AA929F93464CD, xmp.iid:22ED4D8C6806DF11A31AA929F93464CD, xmp.iid:23ED4D8C6806DF11A31AA929F93464CD, xmp.iid:24ED4D8C6806DF11A31AA929F93464CD, xmp.iid:25ED4D8C6806DF11A31AA929F93464CD, xmp.iid:E121D2BF7206DF11A31AA929F93464CD, xmp.iid:E221D2BF7206DF11A31AA929F93464CD, xmp.iid:E321D2BF7206DF11A31AA929F93464CD, xmp.iid:E421D2BF7206DF11A31AA929F93464CD, xmp.iid:E521D2BF7206DF11A31AA929F93464CD, xmp.iid:E621D2BF7206DF11A31AA929F93464CD, xmp.iid:E721D2BF7206DF11A31AA929F93464CD, xmp.iid:E821D2BF7206DF11A31AA929F93464CD, xmp.iid:E921D2BF7206DF11A31AA929F93464CD, xmp.iid:EA21D2BF7206DF11A31AA929F93464CD, xmp.iid:EB21D2BF7206DF11A31AA929F93464CD, xmp.iid:514A2CC97A06DF11A31AA929F93464CD, xmp.iid:524A2CC97A06DF11A31AA929F93464CD, xmp.iid:534A2CC97A06DF11A31AA929F93464CD, xmp.iid:544A2CC97A06DF11A31AA929F93464CD, xmp.iid:584A2CC97A06DF11A31AA929F93464CD, xmp.iid:594A2CC97A06DF11A31AA929F93464CD, xmp.iid:5A4A2CC97A06DF11A31AA929F93464CD, xmp.iid:5B4A2CC97A06DF11A31AA929F93464CD, xmp.iid:9FF645B09406DF11976EF56927FB4939, xmp.iid:91C400AD8E09DF11AF73D8920B316F41 History When : 2009:04:30 17:07:27+02:00, 2009:04:30 17:07:27+02:00, 2009:05:26 11:12:01+02:00, 2009:05:27 15:42:45+02:00, 2009:07:06 15:02:08+02:00, 2009:07:07 11:27:01+02:00, 2009:09:10 11:58:30+02:00, 2009:10:20 10:53:52+02:00, 2009:11:23 15:20:46+01:00, 2009:11:23 15:49:08+01:00, 2009:11:23 15:49:52+01:00, 2009:11:24 09:54:07+01:00, 2009:11:24 10:55:01+01:00, 2009:11:24 11:14:43+01:00, 2009:11:24 11:20:07+01:00, 2009:11:24 11:36:15+01:00, 2009:11:24 11:50:54+01:00, 2009:11:24 12:14:37+01:00, 2009:11:24 14:26:51+01:00, 2009:11:24 14:43:50+01:00, 2009:11:24 15:17:21+01:00, 2009:11:24 15:18:24+01:00, 2009:11:24 15:31:42+01:00, 2009:11:24 15:41:55+01:00, 2009:11:24 15:47:19+01:00, 2009:11:24 15:51:03+01:00, 2009:11:24 15:55:57+01:00, 2009:11:24 15:56:57+01:00, 2009:11:24 16:05:55+01:00, 2009:12:17 09:46:37+01:00, 2009:12:17 10:06+01:00, 2009:12:17 10:16:52+01:00, 2009:12:17 10:22:22+01:00, 2009:12:17 10:24:38+01:00, 2009:12:17 10:25:32+01:00, 2009:12:17 10:28:11+01:00, 2009:12:17 14:15:24+01:00, 2009:12:17 14:32:57+01:00, 2009:12:17 14:37:19+01:00, 2009:12:22 15:50:45+01:00, 2010:01:15 09:23:46+01:00, 2010:01:15 09:25:15+01:00, 2010:01:15 09:30:04+01:00, 2010:01:21 09:39:54+01:00, 2010:01:21 09:55:11+01:00, 2010:01:21 10:09:31+01:00, 2010:01:21 10:17:33+01:00, 2010:01:21 10:20:20+01:00, 2010:01:21 10:23:32+01:00, 2010:01:21 10:26:06+01:00, 2010:01:21 10:39:24+01:00, 2010:01:21 10:40:21+01:00, 2010:01:21 10:52:55+01:00, 2010:01:21 10:58:13+01:00, 2010:01:21 10:59:44+01:00, 2010:01:21 11:03:39+01:00, 2010:01:21 11:03:58+01:00, 2010:01:21 11:21:40+01:00, 2010:01:21 11:28:49+01:00, 2010:01:21 11:32:56+01:00, 2010:01:21 11:39:38+01:00, 2010:01:21 11:47:16+01:00, 2010:01:21 11:49:26+01:00, 2010:01:21 11:50:27+01:00, 2010:01:21 11:51:43+01:00, 2010:01:21 11:57:31+01:00, 2010:01:21 12:02:43+01:00, 2010:01:21 12:26:34+01:00, 2010:01:21 12:35:59+01:00, 2010:01:21 12:38:41+01:00, 2010:01:21 12:41:55+01:00, 2010:01:21 15:08:36+01:00, 2010:01:25 09:56:08+01:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:96F14D442F66DE118E54AD16E6F3BD3F, uuid:A616FB8EE31311DE98FEE90AB694614D, xmp.iid:B2E95E98F35FDE11A9C6A4D05FF6A601, uuid:6AA0E53ABA54DD119D64FB7D7A50A65C, uuid:4E44EE6ABB54DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:C9720C21B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:C9720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:C9720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:C9720C21B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:C9720C21B454DD119D64FB7D7A50A65C, uuid:9CE3496AB454DD119D64FB7D7A50A65C, uuid:66B8767BB454DD119D64FB7D7A50A65C, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, xmp.iid:3E65D334EDEADE11A494E18EC443E9F8, xmp.iid:4065D334EDEADE11A494E18EC443E9F8, uuid:C478DC8CB454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:95E3496AB454DD119D64FB7D7A50A65C, uuid:C202F052B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, uuid:D1720C21B454DD119D64FB7D7A50A65C, xmp.iid:96F14D442F66DE118E54AD16E6F3BD3F, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219, uuid:64e426a0-d289-4deb-adb8-106b887ea219 Manifest Reference Document ID : xmp.did:96F14D442F66DE118E54AD16E6F3BD3F, uuid:789FD5AEE31311DE98FEE90AB694614D, uuid:B87B073724D811DE970AE97308444006, uuid:33ECBF4EB954DD119D64FB7D7A50A65C, uuid:4A44EE6ABB54DD119D64FB7D7A50A65C, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:BF6E02EED31211DB9E5BDF7E9B8F5A1F, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:BF6E02EED31211DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:BF6E02EED31211DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:BF6E02EED31211DB9E5BDF7E9B8F5A1F, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:BF6E02EED31211DB9E5BDF7E9B8F5A1F, uuid:BDB75202D30F11DB9E5BDF7E9B8F5A1F, uuid:BDB75207D30F11DB9E5BDF7E9B8F5A1F, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:7687302084C611DBBFEFE0B2D58A5CEC, adobe:docid:photoshop:4dfc3eba-f0c5-11db-b396-9c8962f99bf6, uuid:F6F171E4D31111DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:00393490C99E11DB8A12F6FBCF74576A, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, uuid:47061A61D30B11DB9E5BDF7E9B8F5A1F, xmp.did:96F14D442F66DE118E54AD16E6F3BD3F, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8, uuid:AC96570AE30EDE11BC6197EBD382FAB8 Format : application/pdf Title : Product Catalog Description : Business Set - Hi Tech Subject : Product catalog Doc Change Count : 6256 Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 14 Creator : Adobe InDesign CS4 (6.0.4)EXIF Metadata provided by EXIF.tools