Railhead WING Wing Walker RF-Host Wireless alarm control box User Manual WingWalker G

Download:
Mirror Download [FCC.gov]
Document ID	3001856
Application ID	r8TQ8JOq9fvVxf8k4epuZQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.81kB (222567 bits)
Date Submitted	2016-05-24 00:00:00
Date Available	2016-05-24 00:00:00
Creation Date	2016-05-20 16:23:42
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-05-20 16:23:42
Document Title	Microsoft Word - WingWalker-G说明书
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jade

Railhead Corporation
12549 S. Laramie Avenue Alsip , IL 60803, USA
Wing Walker ‐ G User manual
1.
Overview
WingWalker ‐G Wireless alarm system, which is composed of SLB41 standard baton, SLB41‐RF radio command bar,
GST16‐RF warning lamp and RF‐Host wireless alarm control box. When the radio baton (SLB41‐RF) to trigger the alarm,
wireless transmitting alarm information, wireless alarm control box (RF‐Host) to receive this information, issued sound
and vibration alarm, simultaneously by wireless alarm control box start GST16‐RF warning lamp. Alarm status can only
be removed by the operator of the alarm control box.
The wireless part of the system works in the ISM band, the maximum transmit power is less than 0dBm, meet the
relevant provisions of the ISM band.
Host (ID code) is unique, and can be programmed to ensure that the different alarm systems do not interfere with each
other.
2. Wireless Parameter
3.
Center Frequency
Modulation
Air Data rate
Frequency Deviation
Antenna
Power
2.440GHz
GFSK
250Kbps
1MHz
1.5dB
‐5dBm（Max）
detailed description
1. SLB41 Standard command bar
Power supply using two AM2 SIZE C LR14 alkaline batteries.
The black switch controls the lighting and extinguishing of the baton, and does not
have the function of wireless transmitting and alarming. Two black switching
functions are the same, are controlled by LED (red) light up / out.
The color of the circuit box is red.
2. SLB41‐RF Radio command bar
Power supply using two AM2 SIZE C LR14 alkaline batteries.
Black switch controls the light / off of the baton
When the red button is pressed, the baton is lit, and the alarm information is
transmitted.
The color of the circuit box is lemon yellow.
3. GST16‐RF Warning light
Use two AM1 SIZE D LR20 alkaline battery power supply.
Turn on the power switch, the blue LED flashed out and blue shade of red
indicator light flashes, said GST16-RF enter standby state (wait RF-Host
flashing lights control information), when received RF-Host alarm
information, blue dual LED flash explosion; if RF-Host stop sending flash
control information, GST6-RF turn to standby, continue to control
information to wait to RF-Host flash.
Built in two switch, select working mode: normal / on code.
3 hole magnetic suction bottom cover.
TEL: 708-844-5500 FAX：708 - 844-5559
4. RF‐Host Wireless alarm control box
Built in polymer lithium battery (11.1V), you can use rechargeable
batteries.
LED digital display tube, used to display ID Host.
There are 3 power indicator LED, used to indicate the quantity of electricity.
Built in buzzer and vibration motor.
Equipped with steel clip.
Boot, the first implementation of the self‐test process, and then enter the
code function, after the completion of the above two steps into the normal
standby state, waiting for the SLB‐RF radio command bar sent alarm
information.
Power switch
RED LED
YELLOW LED
BLUE LED
LED Digital display tube
Buzzer
Battery Indicator
RF‐Host Panel description：
① Power：RF‐Host Power on / off。
If you cancel the alarm, restart you can.
② LED Digital display tube.：Disply Host ID。
③ Battery indicator: display power lithium battery.
3 LED light: full power, 2 LED light: about 50% of the electricity; 1 LED light: low power, need to charge.
④ Blue LED: heartbeat status indicator。
⑤ Red / yellow LED: alarm indication LED,
When an alarm occurs, the red / yellow LED flashes alternately.
Turn
On
Self
checking
Pair
code
Standby
Alarm?
Alarm
processing to
timing?
RF‐Host Work flow chart
TEL: 708-844-5500 FAX：708 - 844-5559

Press the power button to start the alarm control box, RF-Host start self-test process: LED digital
display tube in order to display the numbers from 1 to 9, and the power indicator LED, red, yellow,
and blue LED turn the water lit and extinguished, the final buzzer sounded a short sound, vibration
motor about. After the above process, complete self inspection.

RF-Host after the self-test, namely entered the state code: digital display display current host
ID, blue LED flash, while the emission wireless to code information, the process lasts for about 2
seconds, digital display tube is closed, the display. Toward the end of the status code. Into the normal
standby state, at this time, only the blue LED slow heartbeat flashing, waiting for the occurrence
of alarm events.

When RF-Host receives the SLB41-RF to send the alarm information, LED digital display tube display
ID Host address, red, yellow LED alternating light, while the buzzer and vibration also synchronous
alternating action. Wireless flash control information to the GST6-RF, the GST16-RF began to flicker.
There are two ways to cancel the alarm state: A. to re open the power, you can reset the alarm state.
B. alarm state lasts about 1.5 minutes or so, you can automatically withdraw from the alarm state,
to return to the standby state.
5. charging seat
RF‐Host alarm control box for charging, while 2 RF‐Host charging.
In charge, the red indicator light;
Charging completion, the green indicator light.
4. operation method
( 1 ) block diagram
Block diagram of the working state of the code
Normal working state diagram
TEL: 708-844-5500 FAX：708 - 844-5559
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
TEL: 708-844-5500 FAX：708 - 844-5559

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jade
Create Date                     : 2016:05:20 16:23:42+08:00
Modify Date                     : 2016:05:20 16:23:42+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - WingWalker-G说明书
Creator                         : jade
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:c267c903-809c-40f1-8e94-45956de363b1
Instance ID                     : uuid:7d8efec6-ef5e-427b-97ba-9683f7a656b5
Page Count                      : 4

EXIF Metadata provided by EXIF.tools